Used High Gloss Polishing Machine for sale (75,036)

Condition: like new (used), functionality: fully functional, power: 3 kW (4.08 HP), High-Gloss Polishing Machine / Polishing Stand Manufacturer: Bauerrichter Model: PM 88 This machine comes from a kitchen manufacturer and was used for, among other things, high-gloss fronts. The ultimate solution for stationary polishing! Motor approx. 3 kW, 230/400V Polishing shaft height / working height approx. 900 mm Polishing ring diameter max. 450 mm Usable polishing width 140 mm Storage table for e.g. polishing agents, tools... approx. 350 x 350 mm Execution - Stable, welded steel construction with mounting flange for floor fastening - One continuous polishing shaft, with polishing rings mounted on both right and left sides Bsdpfx Aneym Atro Uswr - Integrated storage table for polishing materials - Cover/protective hoods over the polishing rings Dimensions approx. 1600 x 1000 x 1200 mm (LxWxH) Weight approx. 400 kg Including brand-new pleated polishing mop set

Condition: good (used), Year of construction: 2007, working width: 800 mm, Polishing machine Manufacturer: Gottschild Model: HBS Bjdpfsxzqrqex An Uewr Year of manufacture: 2007 High-gloss polishing machine, previously used for polishing kitchen fronts and bathroom furniture parts Working width: 800 mm 1 polishing head, moves automatically right – left Polishing motor: 0.7 / 0.9 kW Working area is detected by sensors Conveyor belt width 820 x length 1950 mm Conveyor belt moves forward and backward One roller conveyor each in front of and behind the transport system, B 820 mm x L 1500 mm Connected load 2.2 kW / 400 V / 50 Hz Compressed air connection 6 bar

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Bwjdswz Ukyopfx An Uor Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling diameter in steel ST 60: 32 mm - Drill spindle mount: MK 3 - Right/left rotation - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: - Coolant system - Quick-change drill chuck 1-13 Bsdpfx Anjdkx Anj Ujwr - Lighting

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Bwjdpey Ttrtjfx An Uor Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: good (used), Year of construction: 2000, functionality: fully functional, LA MACCHINA UTENSILE s.r.l. – FVA 20" PR 180° Automatic wheel brushing machine for processing and deburring aluminum rims. Technical data Manufacturer: LA MACCHINA UTENSILE s.r.l. (Italy) Model: FVA 20" PR 180° Serial number: 2100 Year of manufacture: 01/2003 Machine weight: 3,000 kg Mains voltage: 400 V Frequency: 50 Hz Connected power: 19 kW Rated current: 40 A Max. operating pressure: 50 bar Bsdpew Rrwzofx An Ujwr CE marking: Yes Machine description Automatic brushing machine for the post-processing of aluminum rims Processing of rims up to 20 inches Two opposing brush units (top/bottom) Digital adjustment of: Brush speed (top) Brush speed (bottom) Brush current (top) Brush current (bottom) Automatic rotary table / workpiece positioning Pneumatic or hydraulic workpiece clamping PLC-controlled processing Application area The machine is used for: Removing burrs Cleaning wheel contours Brushing the spokes Surface finishing after casting or machining Preparation before painting or final inspection

Condition: used, High-performance drilling machine ALZMETALL, type Abomat 20 Production drilling machine Serial No. 452, Year of manufacture 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Distance from spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, infinitely variable Drill slide feed: 20 - 224 mm/min, infinitely variable Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Bwsdpfx Aeikrtqjn Ujr Drill spindle motor power: 1.1 kW (speed 1000 rpm) Mains connection: 400 volts, 50 Hz - Spindle speed infinitely variable via frequency inverter - Drill slide feed infinitely variable via frequency inverter - 2 operating modes: setup and automatic operation - Central lubrication - Control cabinet on the back of the machine - Swiveling control panel - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: Bwjdet Uzk Rspfx An Ujr - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), functionality: fully functional, The used MIND DART DL4 rapid-feed milling machine is particularly suitable for tooling work, thanks to its tilting head and the ability to use a quill (including with automatic feed) with automatic lubrication of the guides. Bwedpoznvmyefx An Uor Equipped with independent automatic feeds, it also includes a dividing head with tailstock and related gears, dividing set, and some tools. The machine has been refurbished to meet standards and is in perfect working order.

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 10019781, total length: 894 mm, total height: 1,746 mm, total width: 650 mm, overall weight: 330 kg, type of input current: three-phase, input voltage: 400 V, Like-new, high-performance circular saw machine from Berhinger Eisele. Max. 10 operating hours. Designed to accommodate saw blades up to 350 mm in diameter. Min./max. cutting range at: 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Rectangle (in mm) 8 x 8 / 170 x 100 8 x 8 / 120 x 100 With continuously adjustable hydro-pneumatic feed, pneumatic maintenance unit, pole-changeable three-phase motor, 400 V, 50 Hz, 1.4/1.9 kW, including automatic clamping device to the left and right of the saw blade, stationary base with integrated coolant system and chip drawer, material support height 900 mm. Operating pressure of 6–8 bar required. Machine design complies with CE standards. Bsdpfxezrlnuo An Uewr Saw machine is designed for a voltage supply of 400 V / 50 Hz (3LNPE400V/50Hz). With continuously adjustable hydro-pneumatic feed, automatic clamping device to the left and right of the saw blade, pneumatic maintenance unit, pole-changeable three-phase motor, 400 V, 50 Hz, 1.4 / 1.9 kW. With additional gearbox for 4 speeds: 10/20/40/80 RPM. With clamping pressure reduction. With micro-spray system with coolant system, i.e. spraying or cooling can be selected. Incl. electrical equipment according to VDE 0.113 and CE compliant, ready for operation. Incl. initial equipment package for steel, consisting of: 1 pc Saw blade HSS 350x3.0x40 Z = 280 ZT04 1 pc Saw blade HSS 350x3.0x40 Z = 180 ZT 06 1 pc Saw blade HSS 350x3.0x40 Z = 110 ZT10

Condition: used, functionality: fully functional, Polyservice D2 tribo-finishing machine, equipped with a noise-reduction enclosure and a remote control unit. Bwodpfxjzrpkmo An Usr

Condition: used, Year of construction: 1990, working area D= 30 mm speed 20 m/min Bwodpfezl E Rcsx An Usr Bar length 3000- 6000 mm weight of the machine ca. 3 t dimensions of the machine ca. 9 x 2 x 2,4 m Belt grinding line with 2 grinding units for pipes and bars. Surface of round material is grinded by through feeding.

Condition: used, Brand: Macrotec Model: RA7 Serial number: 0707812 Type number: A25 Bedpfx Ajzqhp Sjn Uowr Condition: Used Price: € 400,- ex VAT

Condition: good (used), Year of construction: 2005, Professional and high-performance strapping machine from a renowned German manufacturer with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system, as well as a quick-change system for strap coils. Bwodpfx Aezq Ekysn Usr -Up to approximately 50 straps per minute. -Strap dispensing triggered by a robust foot pedal. -Strap tension continuously adjustable. -Soft tensioning possible. -Automatic strap loop ejection when strap dispensing is triggered without packaging material. -Wear-resistant strap guides with a quick-change system. -Can be moved using foot rollers. -Documentation consisting of operating manual, parts lists, and wiring diagrams. The machine can be demonstrated while powered on.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2132072, REF: MM6195 1 x Foodlogistik GmbH high-capacity dicing machine supplied with dicing multigrid. This is a fantastic high-throughput dicer for dicing fresh, tempered and cooked meat, poultry or fish. Can also be used for cheese, vegetables and fruit. Technical specification ⚙️ ✅ Manufacturer - Foodlogistik GmbH ✅ Model - DICR CAPACITY 126. ✅ Serial number - 2132072. ✅ Date of manufacture - 2013. ✅ Throughput / capacity - up to 3,000 kg/h depending on product. ✅ Product temperature range - -3C to +60 C. ✅ Chamber dimensions - 530mm long x 126mm wide x 126mm high. ✅ Electrical requirements - 400-415 V / 50 hz / 3 phase. Bodpfx Ansxfll Ts Uewr ✅ Power - 5.6 kW. Dicing grid - multigrid, currently set up for 10mm cubes. ✅ Condition - very good, last used in June 2025.

Condition: excellent (used), Year of construction: 1993, wire diameter range: 2,4 - 3,8 mm nail length: 50 - 90 mm Bwsdod Ez Eropfx An Uer output: 820 nails/min

Condition: used, Year of construction: 2012, 2012 DATRON M8 High-Speed Machining Centre High-Speed Precision Milling for Aluminium, Plastics & Composite Materials The 2012 DATRON M8 is a purpose-built high-speed machining centre designed for manufacturers demanding exceptional surface finishes, short cycle times and outstanding accuracy. Unlike conventional VMCs, the DATRON M8 has been engineered specifically for high-speed machining of aluminium, plastics, composites and other non-ferrous materials, making it an excellent choice for precision engineering, aerospace, medical, electronics and motorsport applications. With its rigid gantry construction, high-speed spindle and integrated minimum quantity lubrication (MQL) system, the M8 delivers significantly faster machining while reducing coolant consumption and overall operating costs. The large working envelope also allows manufacturers to machine oversized components or nest multiple smaller parts in a single setup, maximising productivity and spindle utilisation. Designed for continuous production environments, the DATRON M8 combines rapid traverse rates, excellent dynamic performance and micron-level accuracy to produce complex components with superb edge quality and surface finish. The machine excels in applications such as: * Aluminium components * Front panels & enclosures * Precision engineering parts * Medical devices * Aerospace components * Composite materials * Plastics & engineering polymers * Signage & engraving * Prototype and low-volume production Key Benefits ✔ High-speed machining technology for reduced cycle times ✔ Exceptional surface finishes with minimal secondary operations ✔ Large machining area for oversized parts or nested production ✔ Low operating costs through efficient MQL lubrication ✔ Outstanding accuracy and repeatability ✔ Ideal for aluminium and non-ferrous materials ✔ Perfect for prototype work through to full production Whether you’re expanding production capacity, replacing slower machining centres or introducing dedicated aluminium machining, the DATRON M8 represents an excellent investment. Its combination of speed, precision and low running costs has made the M8 one of the most respected high-speed machining platforms in the industry, with installations across precision engineering, aerospace, medical and electronics manufacturers worldwide. The original M8 platform established DATRON’s reputation before evolving into the later M8Cube generation, renowned for its productivity and precision. (DATRON⁠) For more information on this machine, including specifications, tooling, inspection reports and availability, contact Swiss CNC Ltd today. Bwedpszmp D Aofx An Ujr

Condition: used, Manufacturer: SPALECK Drum diameter: 1100 mm Bwjdpfoy Nlmbsx An Usr

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Bwsdeyglkyjpfx An Uer Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” Bsdpszpfy Sofx An Uswr -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Donau DR 32 High-Speed ​​Radial Drilling Machine A high-precision, robust high-speed radial drilling machine valued for its reliability in mechanical engineering and industrial manufacturing. Thanks to its swiveling arm, it allows for the quick and flexible positioning of the drill head over the workpiece. Technical Specifications Drilling capacity: Max. 32 mm in steel. Tool holder: MT 4 (Morse Taper). Speed ​​range: Approx. 41 to 1,800 rpm. Quill stroke: 190 mm to 200 mm. Reach: Flexibly adjustable from approx. 240 mm to 850 mm. Table size: 1,200 x 600 mm. Typical Features Tapping function: Integrated automatic system for thread cutting (e.g., up to M26 in steel). Feed rates: Automatic quill feed with multiple settings. Coolant system: Integrated pump and coolant channel directly on the work table. Bwodpfx Anjznkgno Ujr "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Donau DR 40 Z High-Speed ​​Radial Drilling Machine The Donau DR 40 Z is a powerful, conventional high-speed radial drilling machine designed for trade and industrial applications. It is characterized by its high flexibility and a swiveling, extendable arm, enabling fast and precise machining of workpieces. Technical Specifications Drilling capacity: Up to 40 mm in steel and 50 mm in cast iron. Tapping capacity: Max. M33 in steel and M45 in cast iron. Tool holder: MT 4 (Morse Taper 4). Spindle stroke: 200 mm. Reach: Variable from 320 mm to 1140 mm. Workpiece height: Max. approx. 700 mm. Table size: 1200 x 750 mm. Speed ​​range: 45 to 2240 rpm. Feed rate: 0.075 to 0.6 m/min. Drive power: Approx. 6 kW. Weight: Approx. 1.8 to 2.0 tonnes. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." Bjdpjznkd Tsfx An Uswr komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Donau Danuflex-128 High-Speed ​​Radial Drilling Machine A manual high-speed radial drilling machine from the renowned German manufacturer DONAU Werkzeugmaschinen. This class of machine is characterized by an extremely flexible, smooth-moving swivel system and is primarily used in tool and fixture making, as well as in single-part and small-batch production. Technical Specifications Tool holder: MT4 (Morse Taper 4) Clamping table: 500 x 1055 mm Maximum reach: 1120 mm Spindle stroke: 160 mm Column diameter: Ø 150 mm Speed ​​range: 45 – 2240 rpm (electrically selectable steps) Bjdpfezni T Hjx An Uowr Feed range: 0.075 – 0.3 mm/rev Motor power: 1.5 / 2.2 kW Total weight: approx. 1,800 kg Additional equipment: Integrated thread-cutting unit "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2026, Machine characteristics Ergonomic and efficient design The CORMAK SZLIFMASTER-E is a modern machine designed for deburring, grinding and polishing sheet metal. The mobile head with two tool mounts allows simultaneous use of two different brush types, significantly improving processing efficiency. The adjustable arm enables control over pressure force, optimising performance and speed compared with manual operations. Advanced functions for maximum precision The machine is equipped with an adjustable spindle speed from 0 to 2,500 rpm, allowing full adaptation to different materials. The vacuum system ensures stable fixing of components, improving both precision and operator safety. Head operation is controlled through the swing arm, enabling smooth and effortless work. The head can rotate 180°, allowing the operator to quickly switch between tools — ideal for alternating between different brushes or polishing attachments as required. Fast and easy processing of various components The machine enables accurate processing of parts with different shapes and material thicknesses. Quick and reliable vacuum clamping ensures fast setup and secure workpiece holding during operation. Magnetic table with remote control – comfort and precision The machine features a magnetic table with adjustable clamping force for stable workpiece holding. The included remote control allows precise regulation of magnetic strength depending on part size and thickness. This gives the operator full control over the clamping force, ensuring high performance and safety. Technical parameters Table dimensions: 1,025 × 825 mm Maximum workpiece size: 1,000 × 800 mm Workpiece thickness: 0.5 – 200 mm Spindle speed range: 0 – 2,500 rpm Number of tools (discs): 2 Extraction capacity: 1,400 m³/h Magnetic table area: 180 × 300 mm Vacuum table area: 350 × 350 mm Arm reach: 1,300 mm Bwsdpfx Anezp E Hre Usr Head rotation: 180° Head motor power: 0.75 kW Vacuum motor power: 1.1 kW Total power: 4 kW Machine dimensions: 1,200 × 825 × 1,400 mm Weight: 200 kg Thanks to its ergonomic design, advanced features and magnetic table with remote control, the CORMAK SZLIFMASTER-E is the perfect professional solution for sheet-metal finishing, increasing both efficiency and operator comfort. PLEASE NOTE!!! This machine is a returned item; it is second-hand but in working order. NO WARRANTY!!!

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev Bwedsirax Uepfx An Uor -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg