Used Other sanders for sale (62)

Condition: good (used), Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Bslqovw Uf De Sth Iswl Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin Bjlq Stovxqh Doh Iewl - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 940x640x136 mm Belq Ssv A Hzbsth Iewl Weight 96 kg Total power requirement 1,5 kw

Condition: excellent (used), Motor power S1: 1500W Weight: 118 kg Year: 2023 Voltage: 230V Workpiece width: 560 mm Bolq Stsv S D Rrsh Iswl Maximum workpiece height: 75 mm Shaft diameter: 132 mm Feed rate range: 0 to 3.5 m per minute

Condition: ready for operation (used), Selling a sanding machine for wooden handles. It consists of two energy-saving IE3 sanding motors, each rated at 1.5 kW, which drive the two sanding belts, as well as a gear motor for transporting the handles through the sander. The adjustable gear drive for the handles through the sander also allows for sanding oval handles. The machine was discontinued, repaired, and stored approximately one year ago. Bslq Sjwau Uvsth Iowl

Condition: used, Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Bjlq Stov Ukcmsh Iswl Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Code: 0361 Brand: TB Model: 2A Universal 2-shaft sander for wood, aluminium, metals and various Technical Data Cast-iron sttructure Right shaft length mm 400 Bjlqst Nhqmo Sth Iswl Left shaft length mm 400 Speed rpm 1400 Three-phase motor Hp 4,5 N° 1 inflatable roller 200 x 140 mm N° 1 inflatable roller 200 x 80 mm Overall dimensions mm 1500 x 400 x 1050 Weight kg 80

Year of construction: 2001, Condition: excellent (used), 4-side sanding machine OMEF Aggregates: 1. Bottom 2. Top 3. Transverse top 4. and transverse fossa 5. Right vertical 6. Right horizontal Bwolqjqmny Aj Sth Isl 7. Left vertical 8. Left horizontal

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 1700x860x850 mm Weight 190 kg Total power requirement 1,5 kw Belq Sthevz Hzlo Iswl

Condition: used, on a casting machine, grinding machine, belt or roller conveyor Bwslq Sthsvvbqwj Iel

Condition: good (used), Code: 0116 Brand: GHERMANDI - ITALY Model: OLIMPIA 200 Bottom belt sanding machine for sanding wooden edges, profiles, battens, etc. Technical data: Working width mm 200 Bwolq Stomk T Uish Ijl Table length mm 1240 Belt development mm 2000 x 200 Belt speed 17 mt/min Working table height mm 820 Motor Hp 4 Vacuum motor Hp 0,5 Overall dimensions mm 1240 x 600 x 1000 h Weight kg 350

Condition: used, Carousel sanding machine Locatelli Oriental Matik max sanding length: 1000 mm min sanding length: 50 mm max sanding diameter: 100 mm mandrel motor: 4-pole 3 HP speed: 1460, 2000, 3100 r.p.m. sanding belt motors: 2-pole 0.75 HP each slide motorvariator: 4-pole 9 to 50 r.p.m Bwolqjirtwze Sth Iol slide speed: 14 to 25 mm/sec. swinging unit motor reduction gear ratio: 1:14 4-pole 0.25 HP Net weight: 1340 kg Gross weight: 1640 kg

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 1700x660x850 mm Weight 180 kg Total power requirement 3 kw Bwelq Sthovz Hzfj Ijl

Condition: used, Year of construction: 2017, machine/vehicle number: 16493, - Manufacturer Leif & Lorenz - Type B6 - Working width 1100 mm - Year of manufacture 2017 - 1st unit - Distributor brush system FlexTrim - Motor power 1.1 kW - Brush head speed, frequency converter control Bolq Sthoumvraj Iswl - With vacuum conveyor belt - Feed continuously adjustable - Length 1,000 mm - Location, in stock - Color RAL 7035 - Volt, HZ 400/50

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Bjlq Seh T Dzqsth Iswl Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Abrasive belts: 80 x 1260 mm Bwelqjqnufvs Sth Iel Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm 3 pieces. Camam, Comec, OMEF, Brusa di Garboli

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 800x860x850 mm Weight 140 kg Total power requirement 1,5 kw Bwelq Sthsvz Hy Ue Iol

Condition: used, Year of construction: 2009, Dust removal brush with spiral brush, transverse to the direction of workpiece travel. The dedusting brush is installed on a roller conveyor. Bslq Seuulpqoth Iowl - Manufacturer : Venjakob - Height adjustable via a handwheel - Working width: 1.300mm - Total width: 2,450mm of the brush unit - Length: 3,000 mm (2,100 + 800 mm folding table) - Roller diameter: 65mm - Roller pitch: 150mm - Rollers with plastic coating - In stock in Blomberg - Volt/HZ: 400/50 - Extraction system required on site - Suction nozzles 2 pcs - Diameter 120mm each - Volume flow approx. 2,000m²/h - Machine without control cabinet and frequency converter for roller transport, can be offered on request.&nbsp

Condition: excellent (used), Carousel sanding machine Intorex LTA 1300 Max working length: 1300 mm Max sanding diameter: 160 mm Spindle motor power: 3 HP Total power: 3,2 kW Output up to: 960 pcs / hour Net weight: 75 kg Gross weight: 1200 kg Dimensions: 2,5 x 1,2 x 1,6 m Sander for turned pieces with a drum with 6 spindles and a adjustable rotating speed between 0,5 and 5,5 rpm. Beljirt Ivoq Sth Iewl The working system operates through a rotating drum and 5 lines of oscillating brushes equipped with grooved sanding belts of different grades. Centering, holding and ejection is effected on automatic cycle by a cam installed in the drum.

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 1000x900x1400 mm Weight 680 kg Total power requirement 12 kw Belq Sthovz E Uqe Iewl

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine 6 sanding units, each 1.5 kW, max. working width 250 mm, Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Weight in kg: approx. 3000, Bwjlq Sthodykwle Isl (Makor, Delle Vedove, Venjakob, Flader)

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 1250x880x850 mm Bwolqevz E A Uj Sth Iel Weight 180 kg Total power requirement 1,5 kw

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 1250x880x850 mm Bwjlq Sthsvz Ey Te Ijl Weight 180 kg Total power requirement 1,5 kw

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 1200x1600x1400 mm Weight 750 kg Bwjlq Sthovz Eymo Iel Total power requirement 5 kw

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 1320x660x850 mm Bjlqsvz Ekxj Sth Iewl Weight 170 kg Total power requirement 1,5 kw