2
turret lathe RE 25 from Erhardt u. Spiess in used condition
Byzbuqauqm
2
Make: TRAUB
Model TD 16
Material passage:16 mm
Number of cross slides: 4
connected load: approx. 2,6 kW
Pv3eyi
Bar feeder
2 MACHINES ARE AVAILABLE
4
turning diameter over bed: mm
spindle passage: 60 mm
turning length: 45 mm
tool turret - number of stations: 8
Number of tools: 6 St.
turning diameter: max. 56 mm
drill depth: max. 70 mm
revolution per minute: 48 - 1500 (spindle) U/min
threading: Drehzahl: 24 - 750 U/min
total power requirement: 5,5 kW
weight of the machine ca.: 2,4 t
space requirement of the machine approx.: L:2,1x1,0x1,8 m
Cam-Controlled Automatic Lathe
- 2 x rotary slide
- 2 x cutting-off carriage
- cooling system
S8zdzgnvb...
1
turning length 300 mm
workpiece dia. 200 mm
Boc0s3ctwy
turret head Werkzeugstationen 6
number of spindle speeds 700-3000 U/min
spindle bore 20 mm
rapid traverse 9 m/min
total power requirement 1 kW
weight of the machine ca. ca. 1,0 t
dimensions of the machine ca. 1,10 x 0,4 x 1,2 m
machine has a lot of accessories
operating instruction
12
Speeds: 350 - 800 rpm.
Height above bed: approx. 13cm
Length of travel: approx. 45 cm
The machine is technically tested and works.
Poygb
Accessories as shown.
5
Turret lathe Fabr. HARDINGE HCT 3 type
Masch.# EC 2270
Technical data:
Tip height 170 mm
Turning length 240 mm
16 spindle speeds 125-3000 rpm.
stepless carriage feed 0-100 mm / min.
Power 1.5 HP
External dimensions approx. 1900 x 800 x 1600 mm
with
-Clamping Collet fixture
-Three jaw Chuck 125 mm
-6-fold turret slide
-8 x turret stop
-Cutting sled
-48 collet chucks up to 28.5 mm
-Cooling device
Cyg9uv3cm
-R + L-run
very little used, in very good condition
3
Automatic turret lathe
brand: INDEX
type: A18
Lon7apcr
new in: 1944
equipped with: 6x turret
5
incl. plenty of accessories
speed 110 - 4457 1/min
Bw7i9flacr
max bar length 3000 mm
6 fold turret
incl housing and accessories
4
Year of manufacture 1973
Electric hydr. control
bar passage 25 mm
main spindle with collet chuck head 148 E
6-fold turret
Buwyupixpr
long turning device on Q 1
Parts removal device
Bar feeder with feed gripper
Long turning device for the front cross slide
extensive accessories
6
turning length 300 mm
workpiece dia. 200 mm
turret head Werkzeugstationen 6
number of spindle speeds 700-3000 U/min
spindle bore 20 mm
rapid traverse 9 m/min
Btrpkyh9dp
total power requirement 1 kW
weight of the machine ca. ca. 1,0 t
dimensions of the machine ca. 1,10 x 0,4 x 1,2 m
machine has a lot of accessories
operating instruction
4
- max. bar capacity: Ø 25 mm
- 8 stations turret
Bfg80kip8w
- spindle speed: 14 - 5750 1/min
- motor capacity: 4 kW
- barfeeder IEMCA AS 325/32
- dimensions LxWxH:
machine 1900 x 1020 x 1650 mm
barfeeder 4800 x 600 x 1300 mm
overall weight: ca. 2.400 kg
8
turret lathe make EMAG type NE 42
Technical data:
Ciqr2g2
Centre height 180 mm
max. turning length 400 mm
largest swing over bed 360 mm
Spindle speeds 55 - 2000 rpm
Spindle bore 42 mm
Outer dimensions approx. 1800 x 800 x 1600 mm
Drive power 3.0 / 4.0 HP
Weight approx. 875 kg
with
- turret support with 6 tool stations
- collet device with 14 collets up to 32 mm
used, in good condition
4
turning length 300 mm
workpiece dia. 200 mm
turret head Werkzeugstationen 6
Ggtqncwn
number of spindle speeds 700-3000 U/min
spindle bore 20 mm
rapid traverse 9 m/min
total power requirement 1 kW
weight of the machine ca. ca. 1,0 t
dimensions of the machine ca. 1,10 x 0,4 x 1,2 m
machine has a lot of accessories
operating instruction
4
Programmatic lathe Fabr. TRAUB type TF 60/140
Masch.# 194 year 1976
Technical data:
Max bar passage 60 mm
Max spindle 120 mm
maximum clamping diameter 130 mm
Swing diameter 190 mm
21 spindle speeds 21-2000 RPM.
controllable speed 4 right 2 left
Toboggan runs 125 mm longitudinal
70 mm cross
installed power of 14 kW
with
-Copying device
-Strehleinrichtung
-hydr. Clamping device
-Rod feeder
-2 vertical slides
-2 horizontal slide
-Clamping pliers set
-Three jaw Chuck
Bbjoyxo8lc
used, in good condi...
4
Single spindle turret lathe Fabr. TRAUB type TK 30
Masch.# 159 year 1979
Bbjozbad9d
Technical data:
Clamping Collet diameter DIN 6343 up to 30 mm
11 spindle speeds 400-4000 RPM.
Cross heads way front/rear 43 / 43 mm
Power 4.5 / 6.3 kW
Weight approx. 1800 kg
External dimensions approx. 1800 x 900 x 1600 mm
with
-Cross support
-Kpiereinrichtung
-Star revolver
used, in good condition
8
Revolver turning machine Fabr. SPRINT Type T.R. 26
Fabr. # 556
Technical data:
Peak height 125 mm
Peak width
Spindle hole 30 mm
Bed length 700 mm
Bed width 140 mm
max. Removal revolver riding stock-tab spindle 400 mm
Spindle speeds 140-2830 UpM
Exterior length x width x height 1500 x 800 x 1600 mm
Zl773wu
Weight about 700 kg
with
-Spanzanges Facility
-Revolver stick
-Cooling device
needed, in good condition
12
High precision turret lathe make SCHAUBLIN type TR 102 HP
machine # 167073, year of construction 1966
hydropneumatically controlled
Technical data:
centre height 102 mm
Length of the bed 900 mm
distance headstock - turret 300 mm
Collets passage 22 mm
Number of places in the revolver 6
Diameter of the bores 20 mm
6 spindle speeds 840 - 3000 rpm.
Gv9fgo
working feeds 0,02 - 2 mm/min
Fast feed 8 m/min
required air pressure 5 - 7 atü
Air consumption 5 - 10 m3/h
Drive power 2,5 HP
Weight approx. 670 ...
Used Turret lathes - automatic
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Sell now on Machineseeker! Over 220,000 inquiries per month
Olympic Games: Machineseeker sponsors Team Germany
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: The World's 10 biggest excavators
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
