Used turning automatic lathes for sale (208)

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Fpsdjwuddvopfx Akvog Connected load kW: 40 (47 kVA)

Condition: new, Year of construction: 2025, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, 1 multispindle TORNOS SAS16-DC in rebuilding - new electrical cabinet SIEMENS or FANUC, to choose Fsdpfxougl S Is Akvopg – pick-up with brake – adjustable stop with counter operation – 3 independent feeding system – several tool-holders and drillings – drum bar with support – Options :automatic bar loader IEMCA PRA, numerical tapping, CNC cross slides, etc... Contact us.

Condition: used, Year of construction: 1995, turning diameter over bed 50 mm spindle passage 26 mm turning length 275 mm total power requirement 12 kW weight of the machine ca. 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock Fsdjt Hwp Tepfx Akvspg

Condition: new, Long lathe with a maximum of 29 tools to optimize machine efficiency for complex parts. The XIII series is equipped with a counter tool system that contains a maximum of 14 driven tools for high productivity when machining complex parts. The use of guide bushes allows longer parts to be turned, while machines without guide bushes are ideal for machining short parts and cold drawn material. - Max. Machining diameter: 20/32/38/45 mm - Max. Machining length: 270/120 mm - Axles: 11 SA20XIII - Max. Machining diameter: 20 - Max. Machining length: 270 mm - Axles: 11 SA32XIII Fpjdpfsg Ncd Tox Akvog - Max. Machining diameter: 32 - Max. Machining length: 270 - Axles: 11 SA38XIII - Max. Machining diameter: 38 - Max. Machining length: 270 - Axles: 11 SA45XII - Max. Machining diameter: 45 - Max. Machining length: 120 - Axles: 11

Condition: new, Year of construction: 2026, Hybrid long lathe with 6 axes for demanding turned parts! Cross machining on the back with face machining and turning operations for efficient machining. Powerful cutting, precise machining with removable guide bush system. - Max. Machining diameter: 20/26/32/38 mm - Max. Machining length: 250/160 mm - Axes: 7/8 (Y2 axis) - Tools: max. 27 SA20PII - Max. Machining diameter: 20 - Max. Machining length: 250 mm - axes: 7 - Tools: 23 SA26PII - Max. Machining diameter: 20 - Max. Machining length: 190 N: 60 - Axes: 7 + Y1 - Tools: 27 SA26PII - Max. Machining diameter: 26 - Max. Machining length: 250 - axes: 7 - Tools: 20 SA26PYII - Max. Machining diameter: 26 - Max. Machining length: 190 N: 60 - Axes: 7 + Y1 - Tools: 25 SA32PII - Max. Machining diameter: 32 - Max. Machining length: 250 - axes: 7 - Tools: 20 SA32PYII - Max. Machining diameter: 32 - Max. Machining length: 190 N: 80 - Axes: 7 + Y1 - Tools: 25 SA38PII - Max. Machining diameter: 38 - Max. Machining length: 250 - axes: 7 - Tools: 19 Fpodpog Ncc Sefx Akveg SA38PYII - Max. Machining diameter: 38 - Max. Machining length: 190 N: 80 - Axes: 7 + Y1 - Tools: 24

Condition: new, Year of construction: 2026, Ultra precision machining system - With up to 33 tools for demanding machining. Thanks to the optional B-axis, various angular machining operations such as drilling, tapping and milling are possible. - Max. Machining diameter: 20/26/32/45/51 mm - Max. Machining length: 270/120 mm - axes: 8 - Tools: max. 29 SA20XII - Max. Machining diameter: 20 - Max. Machining length: 270 mm - axes: 8 - Tools: max. 29 SA26XII - Max. Machining diameter: 26 - Max. Machining length: 270 mm - axes: 8 - Tools: max. 29 SA32XII - Max. Machining diameter: 32 - Max. Machining length: 270 mm - axes: 8 - Tools: max. 29 SA45XII - Max. Machining diameter: 45 - Max. Machining length: 120 mm - axes: 8 - Tools: max. 24 SA51XII - Max. Machining diameter: 45 - Max. Machining length: 120 mm - axes: 8 - Tools: max. 24 Fjdpfx Asg Ncb Rekvepg

Condition: new, Year of construction: 2026, Optimized for high productivity with an impressive price-performance ratio. Optimal structure design for high accuracy and minimal processing time. Swiss-type automatic lathe for turning, cross milling, deburring, thread cutting, cross milling and cross drilling. - Max. Machining diameter: 12/20/32 mm - Max. Machining length: 160/210 mm - axes: 7 Fpsdpog Ncawsfx Akvog - Tools: max. 22 SA12B - Max. Machining diameter: 12mm - Max. Machining length: 160mm - axes: 7 - Total number of tools: 18 SA20B - Max. Machining diameter: 20mm - Max. Machining length: 210mm - axes: 7 - Total number of tools: 22 SA32B - Max. Machining diameter: 32mm - Max. Machining length: 210mm - axes: 7 - Total number of tools: 20

Condition: new, turning diameter over bed 360 mm turning diameter over slide rest 220 mm turning length 1000 mm turning diameter in the gap 380 mm turning speeds 70 - 2000 U/min centre height 180 mm Fpsdpfxsupxucj Akvog spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 oder 400 V total power requirement 1,8 kW weight of the machine ca. 0.65 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M216/0316, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, clamping diameter: 16 mm, counter spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Motor power: 3.7 kW Speed range: 10,000 rpm Indexing: 0.001° full C-axis Max. drilling diameter, frontal machining: 10 mm Max. thread size, frontal machining: M8 / M6 Sub Spindle Max. clamping diameter: 16 mm Workpiece length: 125 mm Max. drilling diameter: 8 mm Max. thread size, rear side: M6 Speed range: 250 – 6,000 rpm Gang Tool Holder (upper) Max. drilling diameter: 4.8 mm Max. thread size: M4 Speed: 200 – 8,000 rpm Turret, driven tools: Max. drilling diameter: 4.8 mm Max. thread size: M5 Speed: 200 – 6,500 / 8,000 rpm Driven Tools, rear side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: 8,000 rpm Tools Tool stations: 21 Gang slide: 8 positions Turret: 10 positions Rear side tools: 3 positions Tool Holders Turning tool shank: 10 × 10 mm Drill sleeve diameter: 19.05 mm Rapid Traverse Rapid traverse X/Y/Z: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power consumption (nominal): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor belt Fpodpfxjxxll To Akvjg Parts catcher Fire extinguishing system

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Max. frontal thread cutting: M12 Tool capacity: 30 tools Fjdpfjxxlkpox Akvepg Number of axes: 7 MACHINE DETAILS Control: Mitsubishi Meldas Connected load: 10 kW Dimensions & Weight Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1212/0058, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 21, TECHNICAL DETAILS Maximum bar diameter: 12 mm Maximum machining length: 200 mm Axes: 7 linear axes + C axes for main and sub-spindle Main Spindle Spindle bore: 14 mm Motor power: 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C axis, full-C (0.001°) Front machining maximum drilling diameter: 6 mm Maximum thread: M6 Sub-Spindle Maximum clamping diameter: 12 mm Part length (back side): 125 mm Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed range: 250 – 6,000 rpm Gang Tool Holder Maximum drilling diameter: 5 mm Fpodexxlvrepfx Akvsg Maximum thread: M4 Maximum speed: 200 – 8,000 rpm Turret Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed: 200 – 6,500 rpm Maximum thread: M5 Maximum speed: 8,000 rpm Tool Stations Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Tool Holders Turning tool: 10 × 10 mm Drill sleeves: diameter 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.5 m × 1.25 m × 1.7 m Weight: 2,500 kg Power Consumption (Rated): 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216/0166, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 21, Equipment: chip conveyor, TECHNICAL DETAILS Max. Bar Diameter: 16 mm Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Spindle bore (main spindle): 18 mm Main spindle motor power: 3.7 kW Main spindle speed range: 10,000 rpm Main spindle indexing: C-axis, Full-C (0.001°) Max. drilling diameter (main spindle): 10 mm Max. thread size (main spindle): M8 / M6 Sub Spindle Max. clamping diameter (sub spindle): 16 mm Workpiece length (sub spindle): 125 mm Max. drilling diameter (sub spindle): 8 mm Max. thread size (back side): M6 Sub spindle speed range: 250 – 6,000 rpm (Full C-axis) Fpsdpfx Asxxlryokvjg Gang Tool Carrier Max. drilling diameter: 4.8 mm Max. thread size: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 4.8 mm Max. thread size: M5 Max. speed: 200 – 6,500 / 8,000 rpm Driven Tools on the Back Side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: up to 8,000 rpm Tools Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back side tools: 3 positions Turning tool shank: 10 × 10 mm Drill sleeve shank diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power Consumption (Rated): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor Parts catcher Fire extinguishing system

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button Fpsdpjvvwblefx Akvjg - Handwheel - Remote support on machine – allows remote diagnostics

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, functionality: fully functional, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub-Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools at Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/parting-off blade (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub-spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Required space (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Power supply: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub-spindle - Main spindle with C-axis - Sub-spindle with C-axis Fpedpfx Akoxf Hqqsvog - 3x powered tool rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 bar feeder - Option for long parts - Spindle flushing (Scherzinger pump)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 81154, turning length: 600 mm, turning diameter over cross slide: 300 mm, spindle speed (max.): 4,000 rpm, turning diameter: 360 mm, bar passage: 60 mm, TECHNICAL DETAILS Control: Siemens 840D Machining area Bar capacity: Ø 60 mm Spindle bore: Ø 66 mm Turning diameter (effective): 300 mm Permissible turning diameter: 360 mm Turning length: 600 mm Center distance: 870 mm Fedpfewc Sa Ujx Akvepg Spindle Spindle mount: ISO-A6 Speed range: 0 – 4,000 rpm Power: 15 kW (S1) Tool turret Turret system: Baruffaldi VDI Tool stations: 12 Driven tools: 6 Travel paths X-axis travel: 190 mm Z-axis travel: 650 mm Rapid traverse speed X/Z: 18 m/min Tailstock Tailstock movement: manual via keystroke or M-code Condition and Special features Filter system: Mist extraction currently out of service EQUIPMENT - LNS Super Hydrobar hydraulic bar loader (Swiss made) - SMW-AUTOBLOK chuck type 210HYN-S - Tool package with clamping jaws and VDI tool holders - Turret with 6 driven tools - Programmable tailstock control

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST-38-BG-0101, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,900 kg, TECHNICAL DETAILS Model: STL38H Serial number: ST-38-BG-0101 Year of manufacture: 2011 Maximum working diameter: 32 mm Maximum rotational speed: 8,000 rpm MACHINE DETAILS Rated voltage: 3-phase, 220-240/380-415 V AC Rated current: 100 A Rated frequency: 50/60 Hz Axis control: 8/6 axes Operating air pressure: 4–6 kg/cm² Dimensions: 3,742 x 1,729 x 1,800 mm Weight: 3,900 kg EQUIPMENT Bar feeder: FMB Turbo 5-55 Fpsdpfxjwwqzyj Akvjg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST-32-BG-0093, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,900 kg, travel distance X-axis: 3,742 mm, travel distance Y-axis: 1,729 mm, travel distance Z-axis: 1,800 mm, TECHNICAL DETAILS Year of manufacture: 2011 CNC: Siemens MACHINE DETAILS Model number: ST L32H Serial number: ST-32-BG-0093 Rated voltage: 3 phases, 220-240/380-415 V AC Rated frequency: 50/60 Hz Maximum spindle speed: 8,000 rpm Maximum machining diameter: 32 mm Dimensions: 1,964 mm x 1,290 mm x 1,800 mm Weight: 3,000 kg EQUIPMENT Bar feeder: FMB Turbo 3-36 Fedpfx Akowwqztjvjpg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter: 16 mm, rotational speed (max.): 12,000 rpm, bar passage: 12 mm, TECHNICAL DETAILS Turning diameter: 16 mm Bar capacity: 12 mm Control: Fanuc Series 18 i-T Main spindle speed range: 500 – 12,000 rpm Drilling capacity (stationary): 7 mm Thread cutting capacity (stationary): M6 × P1.0 Thread cutting capacity (driven tool): M3 × P0.5 Spindle stroke with stationary guide bushing: 135 mm Spindle stroke with gripper unit and stationary guide bushing: 120 mm Spindle stroke with rotary guide bushing: 100 mm Spindle stroke with gripper unit and rotary guide bushing: 90 mm Tool size: 10 mm × 95 mm – 125 mm / 6 tools Sub spindle Max. clamping diameter: 16 mm Speed range: 500 – 8,000 rpm Fsdpfxjwur Shs Akvopg Drilling capacity: 4 mm Thread cutting capacity: M3 × P0.5 EQUIPMENT - Bar feeder FMB Turbo 2-16 / 3200A - Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 010947, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 16-T, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Type: 530 G Fpedpfowx Ngkex Akveg Control: FANUC Series 16-T Connected load: 5 kVA EQUIPMENT Chip conveyor available Bar feeder FMB Turbo 3-26 available

Condition: new, Year of construction: 2023, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. Fpedpok Dz Diefx Akvsg 9 linear axis 1 independent rack with 10 positions Cross-section of outer tools 12 x 12 mm Turret number of stations 12

Condition: new, Year of construction: 2024, -10 linear axes - Ultra-powerful clamping - Rework spindle and its dedicated 9-position carriage (X4) enable you to carry out complex operations in masked time. - Spindle capacity: 8000 rpm Fpjdpju Ik Tiofx Akvjg - Oil-cooled electro-spindle - Latest-generation FANUC 31i numerical control - Compact cast-iron structure

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). Fpedpfx Akeunr H Aevsg The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. Fpjdjuq A D Ropfx Akvog The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : Fpsdpfxjir Id Ue Akvjg – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h

Condition: used, Year of construction: 1995, machine/vehicle number: 253057, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Fjdpfx Akoycu Imsvepg The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane