Citizen K16 VIP

Citizen K16 VIP

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, turning length: 200 mm, spindle speed (max.): 15,000 rpm, controller model: Fanuc Series 31i, counter spindle speed (max.): 10,000 rpm, Equipment: bar feeder, TECHNICAL DETAILS Maximum bar diameter: 16 mm Maximum turning length: 200 mm Main spindle speed: 15,000 rpm Isdpfx Absywu Ecjvoau Sub-spindle speed: 10,000 rpm Main spindle drive: 2.2 / 3.7 kW Sub-spindle drive: 0.55 / 1.1 kW Number of axes: X1, Y1, Z1, Z2, C1, C2 MACHINE DETAILS Control unit: Fanuc Series 31i Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,610 x 1,050 mm Machine weight: 1,950 kg EQUIPMENT Fully functional C-axis on both spindles Bar feeder: IEMCA Genius 118 Type 37 LL Guide bushings (complete set) Fixed and driven tool holders High-pressure pump: 20 bar / 2 channels Comprehensive set of guide bushings Bushings for IEMCA bar loader in various diameters

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Ijdpfxsw E I Itj Abvsau Calibration panel (aluminium) CP20/MV 350x280mm²

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 Iaedeuq Nfhspfx Abvju PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Possible services: delivery, commissioning

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 Iedpfxjuha Ume Abveau - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, functionality: fully functional, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub-Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools at Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Iaodpfxexf Hqqj Abvou Tool System Turning tools (12x12x130): 5 Tool holder/parting-off blade (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub-spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Required space (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Power supply: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub-spindle - Main spindle with C-axis - Sub-spindle with C-axis - 3x powered tool rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 bar feeder - Option for long parts - Spindle flushing (Scherzinger pump)

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° Ijdpfx Abou Uic Tjvjau CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1969, 1 x Centrifuge Steimel S 3 Year of manufacture: 1969 with conical basket and lockable lid. The machine is in technically flawless condition. Technical data: Max. load: 50 kg / 20 l Iajdju Ttrvjpfx Abveu Speed: 1,000 rpm The machine can be inspected under power.

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Ijdpfxowu Rm Rs Abvsau Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Travel : 205 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,001 [°] Iasdpfx Aeuwd Rysbvju COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 5 - Number of motorized positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.269 x 1.160 [mm] - Machine height : 1.693 [mm] - Machine weight : 1.800 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : LNS Hydrobar Express 332 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Iaodoyxpprepfx Abvou Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!