Used Cnc Toolroom Mill for sale (15,448)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 Iajdpfxjxv Su Ne Abren 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Iedpfx Abjwkrq Ajrjan Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Coolant system Lighting Enclosed guarding Manual

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 460045, spindle speed (max.): 5,000 rpm, overall weight: 7,500 kg, controller model: SIEMENS SINUMERIK 840D, Equipment: chip conveyor, TECHNICAL DETAILS Turret Number of spindles: 2 Number of turrets: 3 Number of positions turret 1: 10 Number of positions turret 2: 10 Tool holder: VDI 25 Lower turret head Number of positions: 10 Rotational speed: 6,000 rpm Power of driven tools: 8 kW Main spindle C-axis (resolution): 0.001° Max. spindle speed: 5,000 rpm Spindle power: 27 kW MACHINE DETAILS Control: SIEMENS SINUMERIK 840D Connection: 50 Hz 3x 400 V Total power requirement: 43 kW Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,100 x 2,100 mm Machine weight: 7,500 kg EQUIPMENT Iasdsyhn Nzspfx Abren Chip conveyor Foot pedal

Condition: used, Year of construction: 2018, DMG Mori Sprint 32/8 CNC Swiss Lathe Mfd. 2018 Iaedpfx Abexxm A Tsrsn Control: Fanuc 32-B Plus 8-Axis Power: 75 HP RPM 8,500 Diameter: 32mm With 12-ft Patriot 338 Bar Feed Equipped as pictured Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3. The 2018 DMG Mori Sprint 32/8 is a high-performance CNC screw machine built for precision, speed, and versatility in complex small-part production. Featuring an 8-axis configuration with 6 linear axes and 2 C-axes, the machine is powered by the FANUC 32i-B Plus control system with a 10.4” color display. The Sprint 32/8 is designed with dual spindles capable of 8,500 RPM, with the main spindle delivering 7.4 hp and 29.8 ft-lbs of torque, and the counter spindle generating 3 hp and 10.3 ft-lbs. Both spindles handle bar stock up to 32mm (1.26"), making it ideal for precise machining in medical, aerospace, and automotive industries. The machine supports simultaneous machining with up to 2 tools and offers advanced back-working capabilities. The working area includes Z1, X1/Y1, and X2/Z2/Y2 travels, allowing for intricate multi-sided operations. Tooling includes 8 driven tool stations and multiple configurations for both front and back machining, with speeds up to 6,000 RPM and torque of 2.2 ft-lbs. The Tool Monitoring System offers graphical tool load display, aiding in predictive maintenance and minimizing downtime. Additional features include high-pressure coolant and an integrated air handler, contributing to stable thermal conditions and chip evacuation. Its compact footprint of 30.1 ft² and total weight of 7,826 lbs make the Sprint 32/8 a space-efficient and powerful addition to any high-volume CNC shop. This machine is engineered to streamline part production while ensuring repeatable accuracy, robust power, and operational efficiency.

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Iajdpfew Dvnxjx Abron Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: excellent (used), Year of construction: 2018, swing over cross-slide 808mm, Maximum cutting diameter 430mm, Maximum cutting length 1260mm, Bar capacity 102mm, Spindle speed 3,000rpm, milling speed 10,000rpm, Main spindle power 25Kw, C axis 0.001 degrees, Y axis -/+ 60mm, Ijdpeyk Slrofx Abrean 12 station turret. Celos-Fanuc control, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher

Condition: refurbished (used), Year of construction: 2007, CNC MATRIX Machinable diameter 660 mm Machinable length 1045 mm Main spindle speed 5000 rpm Secondary spindle speed 5000 rpm Milling spindle speed 12000 rpm Tool magazine 40 tools CAPTO C 6 Cooling 70 bars C axis on secondary spindle ROBOT GL 100 F Chip conveyor CONCEPTS Iedsr Iyb Tspfx Abroan

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 580 mm, turning diameter: 845 mm, spindle motor power: 30 W, spindle speed (min.): 1 rpm, spindle speed (max.): 2,000 rpm, spindle bore: 165 mm, travel distance X-axis: 340 mm, travel distance Z-axis: 3,170 mm, mount diameter: 12 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 4,000 rpm, spindle nose: A2 15 POUCES, CNC MATRIX 2, Machinable diameter 845 mm, diameter over carriage 580 mm, machinable length 3170 mm, 12-station turret, rotating tool speed 4000 rpm, spindle bore 165 mm, steady rest SMW K4 from 60 to 280 mm, Pack performance, packing sheet metal, ethernet card, chip conveyor. Isdpjq Nzq Asfx Abrean

Condition: good (used), Year of construction: 2013, CNC MATRIX 2 , Maximum diameter 658 mm, travel X 615 mm, travel Z 1585 mm, travel Y 250 mm, bar passage 102 mm bore 112, spindle speed 35 to 2200 rpm, milling spindle 35 to 12000 rpm, 5 simultaneous axes, mm, 36 tool magazine Capto C6, RENISHAW preparation, steady rest support, chip conveyor. Iasdpfxjuqktto Abrsn

Condition: good (used), Year of construction: 2010, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Iedpfx Aoyizlljbroan Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, magazine barfeed

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments Turning diameter: 650 mm Turning length: 1,500 mm Spindle interface: Capto C6 Total tool stations: 80 Equipment: - NC tailstock - Travelling hydraulic steady rest AX 5 on NC axis - Coolant system with band filter - Kitagawa BB 212-11 hydraulic 3-jaw chuck - Automatic tool touch setter - High-pressure coolant system (IKZ) Iajdpjyk Ddgefx Abren - Software option High Cut Pro (High-accuracy package with Super Nurbs) - CAS collision avoidance system - Main spindle orientation, electric - Multitool with turning function for Y-axis - Helix function - Automatic main power shut-off - DNC-DT interface - Machining Navi M-i (milling), speed control to minimize vibration - One-Touch IGF - Chip conveyor

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Iaedpstmtktefx Abrsn Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Zonder freeskop kunt u klassieke verticale bewerkingen uitvoeren. Met de multihoekfrees (MA-25) kunt u veel verschillende vlakken bewerken. MA-25 2-assige freeskop - 30 kW - 2000 tpm - 1500 Nm koppel C-as bereik: 0-360° - 2,5° Bereik van de A-as: +/- 110° - 2,5° Koeling via spindel: 40 bar Totaal vermogen: 67 kW Geen foundation nodig! De Johnford DMC-serie brugfreesmachine met dubbele kolom en beweegbare tafel is vervaardigd uit een brug/kolomconstructie van gegoten Meehanite-ijzer, die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met C-frame. De brugfreesmachines zijn verkrijgbaar in uitvoeringen met beweegbare tafel en met schuifkolom (vaste tafel), met afmetingen variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De lange basisconstructie biedt volledige ondersteuning aan de tafel over de gehele Y-asbeweging van 130 cm, waardoor zeer zware werkstukken bewerkt kunnen worden. De Y- en Z-assen dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt. Dit maakt nauwkeurige bewerkingen en strakke toleranties mogelijk tijdens bewerkingen met hoge snelheid. Doordat er geen tafeloverhang is, worden de helling en de draaiing van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat de stijfheid verder verhoogt. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange levensduur van het gereedschap en een goede oppervlakteafwerking van het werkstuk. De combinatie van twee schroefbandtransporteurs en een rupsbandtransporteur garandeert een volledige spaanafvoer met minimale handmatige reiniging. Bovendien wordt eindige-elementenanalyse (FEA) gebruikt voor het ontwerp van elke brugfreesmachine, waarbij de effecten van realistische omstandigheden, zoals trillingen, warmte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Iaodpfxjxp Sk Dj Abron Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm Ijdpsu Tln Njfx Abrjan T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. Iedpoty A Ehefx Abrjan - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: like new (used), Year of construction: 2019, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 159005, Technical Data / Equipment for Listing / Offer CNC Turning Center: Mazak QUICK TURN 200 MSY UNIVERSAL 500 Approx. 3,000 spindle hours Previous owner: High-end medical technology (reject rate 0.3%) Control: SmoothG Machine ID / PO No.: JL111H Serial No.: 295361 Commissioning: 07/2020 Decommissioned: 27.11.2024 Current Status: Sea freight packaging and secured by MAZAK direct service History: Machine in perfect condition, flawless MAZAK service records available Configuration (MSY) Iaedpfoylat Hox Abron M = driven tools / milling function S = subspindle Y = Y-axis Equipment / Options (as per documentation) Production package (Mayfran) – includes: Preparation for bar feeder Automatic parts catcher High-performance coolant system 15 bar Hinged belt chip conveyor, side-mounted (Mayfran) Axes / Functions / Interfaces: C-axis subspindle, input accuracy 0.0001° Mazak API interface Cylindrical interpolation Linear scale system for X, Y, Z axis Overload monitoring system Extraction / Coolant / Operation: Preparation for oil mist extraction, electrical/mechanical flange 98 mm Coolant gun (1.1 kW), max. flow rate 17.6 l/min Clamping / Chuck system (Hainbuch) Main spindle: Axfix 65 mini chuck on main spindle A2/6 incl. draw tube thread adapter and installation Hainbuch clamping head (serrated clamping bore) – clamping ranges 23 / 29 / 33 mm (3 pcs) Hainbuch manual quick-change system size 65 Subspindle: Axfix 65 mini chuck subspindle side A2/5 (QT series, new design) incl. draw tube adapter and installation, without ejector Ejector SK65-59 for SK65 chuck (gas spring, custom-made) Hainbuch clamping head (smooth round bore) – clamping ranges Ø 23 / 29 / 33 mm (3 pcs) Peripherals / Additional WERMA KombiSIGN71 signal tower incl. installation, hardware & special PLC Band oil skimmer Rapid 2.1 with timer Waste oil container (1.8 l) + universal mounting bracket Bar feeder LNS QUICK LOAD SERVO III Loading ramp front left, longitudinal or transverse movement Automatic short bar magazine for attachment to the lathe For center height 855–1149 mm Includes accessories (ram, guide bushes, spindle liner tubes) as well as packaging/transport/assembly/commissioning (LNS) Important note for the offer Tool holders / tooling are no longer available. These were relocated by Smith & Nephew to other sites within the EU. Historical new price (net) Effective total net price as per documentation (special net price, all-inclusive): EUR 265,000 net. Original invoice attached Test protocols attached FULL OPTION MACHINE – EXCEPTIONAL CONDITION

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO Iaodpfxoyhdi Rs Abren 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Iajdpfx Absyk Hrgersn Machine No. 8044001846E Year of manufacture: 2013 CNC control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Center height: max. 190 mm Center distance: max. 580 mm Turning diameter: max. 200 mm Longitudinal slide travel (Z-axis): max. 450 mm Cross slide travel (X-axis): max. 160 mm Spindle bore through draw tube: 51 mm Spindle bore at front bearing: 100 mm Spindle speed: max. 5000 rpm Feed rate for X and Z axes: mm/min Rapid traverse rate X-axis: 30 m/min Rapid traverse rate Z-axis: 30 m/min Feed force X and Z: 4500 Nm Turret: 12 stations Driven tool stations: 6 stations Tool holder: cylindrical, VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Electrical connection: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis (chuck position) and C1-axis for tool turret - 3-jaw power chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - Hydraulic hollow chucking device AUTOGRIP - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 of which are driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measuring system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece remaining run-time display and part counter as large display on machine enclosure - Electrical cabinet cooling unit - 9716 total operating hours (main switch on), of which 3322 spindle hours, as read from the meter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4500 x 2600 x 2050 mm Basic machine footprint (L x W x H): 2900 x 2150 x 2050 mm (3200 kg) Chip conveyor footprint (L x W x H): 3350 x 850 x 1650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,200 mm, Mazak Quick Turn Nexus 350M CNC turning center with Mazatrol 640T Nexus CNC control Year of manufacture: 2004.11 Isdpfx Asx Dccyjbrean Turning length: 1,200 mm Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Maximum spindle speed: 4,000 rpm 12-position tool turret Kitagawa 12-inch hydraulic 3-jaw chuck Tailstock Machine weight: 7,500 kg Includes various turret-mounted tool holders, 4 driven tool holders, and additional accessories. Accessories: 4 driven tools Mazak tool holders Chip conveyor

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period: from 08.04.26 to 16.04.26! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Tool holder: SK 40 MACHINE DETAILS Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & Weight L x W x H: 3000 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Table with 4 T-slots Iedpfxoyk Thue Abrjan Mounted vise Documentation

Condition: ready for operation (used), total height: 2,550 mm, total length: 4,200 mm, total width: 3,250 mm, empty load weight: 11,000 kg, met digitale uitlezing Max longitudinal travel X-axe: 1800 mm Max cross-travel Y-axe: 700 mm Max travel Z-axe: 1000 mm Iedoyivznepfx Abrean Power on spindle: 15 kW Admission in boring head (ISO): ISO 50 Spindlespeeds: 2000 rpm Table size: 2500 x 620 mm ACCESSORIES & TOOLING: yes

Condition: excellent (used), Year of construction: 2020, Sub-spindle, Y-axis, C-axis Iasdpfx Abjyla Spsrsn FANUC 31i B5-NT-SmartX control Turning diameter max 305mm Turning length -870 mm Main-spindle speeds 6'000 rpm Sub-spindle speeds 6'000 rpm Milling head B-axis +/- 95 ° Tool changer with 72 positions Turret head: 24 positions with 12 driven positions Tool presetting device Workpiece pick-up attachement Tool breakage control device Bar loader Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Ijdpfxsxpugbe Abrjan Tool changer with 16 driven positions Bar loader Tool presetter device Piece catcher attachment Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1990, total height: 2,300 mm, total width: 1,800 mm, total length: 2,800 mm, Empty weight: 3.500 kg - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 16090455 - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Heidenhain - Power [kW]: 16.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 435 - Z-axis travel [mm]: 210 - Table length [mm]: 1570 - Table width [mm]: 500 - Main spindle power [kW]: 3.8 - Options: External cooling - Tools included: Yes - Transport dimensions: 2800mm x 1800mm x 2300mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iasdpfx Aex Dicmsbron Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, operating hours: 67,000 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 630 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 640 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 270 mm, spindle motor power: 68,000 W, rotational speed (max.): 12,000 rpm, total height: 2,616 mm, total length: 6,300 mm, total width: 2,760 mm, torque: 900 Nm, overall weight: 21,000 kg, controller manufacturer: Siemens, controller model: 840D PL, number of slots in tool magazine: 80, Equipment: chip conveyor, Manufacturer / Model: Index G400 Ratio Line CNC Lathe with Milling Function Year of Manufacture: 2008 Control System: Siemens 840D Powerline Workpiece Diameter: Ø 630 mm Workpiece Length / Turning Length: 2,000 mm Main Spindle Power D102: Power at 100/40% 53/68 kW Torque: 675/900 Nm Steady Rest Diameter: Ø 45 mm – 310 mm Travel Paths: X-Axis: 640 mm, Z-Axis: 2,000 mm, Y-Axis: 270 mm Motorized Milling Spindle: HSK-63, max. speed 12,000 rpm Number of Tools: Right Disc Magazine: 40 tool positions (HSK-63), Left Disc Magazine: 40 tool positions (HSK-63) Operating Hours: 67,000 h (Hydraulics on) – see page 9 for details Dimensions (L × W × H): 6,300 x 2,760 x 2,616 mm Machine Layout Plan: see pages 5 and 6 Weight: 21,000 kg Iodpfxjyk Etce Abrsan Equipment & Accessories: 2 pcs. 3-jaw chucks Coolant System Knoll Type KF150/1100 Chip Conveyor Knoll Type 400 S – 1/370 Safety Devices Standard Accessories Condition of Index G-400: Machine is ready for immediate operation Regularly serviced (once per year by the machine manufacturer) Visually well maintained, normal signs of use The machine is in good overall condition Documentation: Operating manuals available Maintenance records / inspection reports available