Used Cnc Boring Mill for sale (17,875)

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis Dolhcsxcgtgjcqmeck - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC-Steuerung Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Djlhccqezkpv Hemjck Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Dcelhccqjyagidemek Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm Dcslew Iu Nhehccqmok W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: used, Webster Bennett 48 Inch Elevating Rail CNC Vertical Borer. Serial Number 6644-1 Chuck manual 48 inch, supplied with jaws Djlsymc Ipshccqmjck Hydraulic turret Fanuc 18i -T Control. Swarf conveyor Air conditioning Unit on Electrical Panel. 1250mm (approx. ) under tool to table.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Table surface: 1600 x 2000 mm Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Delhozc D Dwoccqmjck Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Dslhccqszc Dyxomock Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 13,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 30 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 30 m/min, total width: 7,000 mm, total length: 21,000 mm, total height: 5,100 mm, overall weight: 80,000 kg, mount diameter: 50 mm, The Pama Speedram 1000 is a versatile and powerful floor drilling and milling machine designed for heavy industrial applications. This machine offers advanced features and specifications that meet the highest standards of precision and efficiency. PAMA automatic head change system PAMA MG4 high speed head: 8000 rpm & 20 kW PAMA CU130-90S tool changer: up to 1300 kg tool weight Chip conveyor: 235 mm and 1200 mm outfeed height Double base plate field: 4000 x 2500 + 4000 x 2500 mm Spindle torque: 1525 Nm Floor drilling and milling machine: cast iron column, gray cast iron, hydrostatic guides, geometric compensation RAM type: 360 x 400 mm with spindle Ø150 mm Note: No cooling system, dry operation. X - axis: 13000mm Y - axis: 3500mm Z - axis: 1000mm W - axis: 700mm Speed: 6 - 3500 (8000)Rpm Power: 37kW Ram dimension: 360 x 400mm Tool holder: 50ISO/Bt/Mk Feed X - axis: 30000mm/min. Feed Y-axis: 20000mm/min. Feed Z-axis: 30000mm/min. Feed W-axis: 30000mm/min. Tool changer: 90 Control: 840D Number of controlled axes: 4 Length: 21000mm Dslhccou Avwvjqmock Width: 7000mm Height: 5100mm Weight: 80000kg

Condition: good (used), Mikron WF 41C CNC Universal Milling and Boring Machine Professional, extremely robust MIKRON WF 41C CNC universal milling and boring machine. Thanks to its sturdy construction, the machine is ideally suited for workshops, prototype manufacturing, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 contouring control. It is extremely easy to program directly at the machine thanks to plain-language conversational guidance; it supports graphic simulations and allows for the easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Data Overview CNC Control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital readout), positioning with manual input, single block, block sequence, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Ranges X-axis travel (table longitudinal, automatic): 630 mm Y-axis travel (spindle slide transverse, automatic): 500 mm Z-axis travel (table vertical, automatic): 460 mm Feed rate: Infinitely variable from 1 – 3000 mm/min in all 3 axes Rapid traverse speed: X- and Y-axis: 6000 mm/min | Z-axis: 4000 mm/min Dcelhszcqf Ieccqmok Max. vertical installation height: 559 mm (between vertical milling head and angle table) Milling spindle drive Spindle speeds: 21 gear stages Speed ​​range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with pull stud groove (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table geometry & workpiece capacity Angle table clamping surface: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping surface: 397 x 550 mm (with 4 x 4 M16 threaded holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrics & cooling Electrical connected load: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Machine dimensions (machine only): 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. operating footprint (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (incl. vertical milling head and angle table) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Deleu Dahnjhccqmock Weight - 40329 KGS

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, spindle diameter: 130 mm, spindle speed (max.): 2,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,600 mm Travel Z-axis: 1,600 mm W-axis: 600 mm W-travel (quill extension): 900 mm Dolhccsyvtrfoqmjck Boring diameter: 800 mm Spindle diameter: 130 mm Spindle speed: 10 - 2,000 rpm Max. torque at boring spindle: 3,150 Nm Table load capacity: 8,000 kg Table size: 2,000 x 1,600 mm Clamping area: 1,800 x 2,000 mm T-slot width: 28 mm T-slot distance: 160 mm Rapid traverse X-axis: 2,500 mm/min Rapid traverse Z-axis: 2,500 mm/min Feed W-axis: 2,500 mm/min Feed Y-axis: 2,500 mm/min Rapid movement W-axis: 3,150 mm/min Rapid movement Y-axis: 5,000 mm/min Facing slide travel: 320 mm Max. torque at facing slide: 5,300 Nm Max. facing diameter: 1,400 mm MACHINE DETAILS Control: Heidenhain 430 Tool holder: ISO 50 Drive power – spindle motor: 15 - 30 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 4,000 x 4,000 mm Machine weight approx.: 40 t

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotational speed (max.): 1,250 rpm, travel distance X-axis: 850 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC 355, TECHNICAL DETAILS X-travel: 850 mm Delhcjxn I U Necqmjck Y-travel: 1,000 mm Z-travel: 700 mm Tool holder: SK 40 Speed: 15 - 1,250 rpm Spindle quill: 75 mm MACHINE DETAILS Control: Heidenhain TNC 355

Condition: refurbished (used), Year of construction: 2007, turning length: 5,200 mm, turning diameter over cross slide: 1,140 mm, turning diameter: 1,140 mm, spindle motor power: 90,000 W, spindle speed (max.): 1,000 rpm, spindle bore: 245 mm, travel distance X-axis: 920 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 5,370 mm, mount diameter: 100 mm, rotational speed (max.): 3,200 rpm, torque: 730 Nm, spindle nose: B20, Equipment: rotational speed infinitely variable, WFL Millturn M120/5000 CNC TURNING-DRILLING-MILLING CENTER TYPE M120 MILLTURN WITH TAILSTOCK AND SINUMERIK 840 D CONTROL SYSTEM Dcslhcceul S Eyeqmsk

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 Dcjlhceu Hl R Tscqmsk MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: used, Year of construction: 1977, Technical details attached. Rotary table 4500x4500 , travel 4000mm, max load 100 ton. Floor plates 6 pcs. 2000x4000 It was retroffited with CNC Siemens 840D More pictures and details on request. Video with the machine working is available on request. Delhccocfkn Uoqmeck

Condition: used, Year of construction: 2014, SHIBAURA BSF 34-23 CNC Siemens 840DSL x=13000 mm y=5000 mm z=3250 mm Rotary table 5000x4000mm, max load =80 to, travel 3000 mm It was completlly retroffited with CNC SIEMENS 840 DSL. Video with the machine working is available on request. Dslhscr Rkdeccqmock Complete documentation is available. More details on request.

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Delhcsy T E Itecqmeck Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, turning length: 1,175 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN Plus iT, number of slots in tool magazine: 36, TECHNICAL DETAILS Maximum spindle speed: 5,000 rpm Turning length: 1,175 mm Turning length with tailstock: 1,100 mm Tool holder: HSK 63A according to DIN 69893 Number of tool magazine positions (disc magazine): 36 Dcolhcszqfvvecqmsk MACHINE DETAILS Control system: HEIDENHAIN Plus iT with Turn Plus

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 710 mm, controller model: FANUC Series 18i-TB, TECHNICAL DETAILS Machining Area Turning length: 660 mm Turning diameter: 340 mm Axes Travel range X-axis: 245 mm Travel range Y-axis: 160 mm Travel range Z-axis: 710 mm Rapid traverse X-axis: 16 m/min Rapid traverse Y-axis: 16 m/min Rapid traverse Z-axis: 20 m/min Spindle Spindle speed: 4,000 rpm Dolhccjzqfu Seqmock Spindle bore: 86 mm Spindle nose: JIS A2-6 Turret and driven tools Turret: 12-station drum turret Driven tool stations: 12 Tool holder: 25 mm square Maximum boring bar diameter: 40 mm Indexing time station to station: approx. 0.35 s Maximum speed of driven tools: 4,000 rpm Drive power of driven tools: 5.5 kW MACHINE DETAILS Control and Axes Control: FANUC Series 18i-TB Axes: X, Z, C, Y, and A axes Machine weight: approx. 6,500 kg EQUIPMENT Bar feeder Chip conveyor

Condition: good (used), Year of construction: 2019, 256mm maximum cutting diameter, 455mm max turned length, 4,000rpm spindle speed, 51mm bar capacity, 12 station VDI turret, milling speed 5,000rpm, Dcslhccszrfnueqmjk 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor, parts catcher, Barfeed unit.

Condition: used, Year of construction: 1994, spindle diameter 125 mm Dsljztfwxehccqmock x-travel 2000 mm y-travel 1600 mm Control Siemens 840 C z-travel 1400 mm 600 mm ja total power requirement 40 kW weight of the machine ca. 27 t

Condition: used, Year of construction: 2014, turning diameter 200 mm turning length 450 mm control Siemens 810D ShopTurn spindle bore diameter 51 mm number of controlled axis 3 turning speed range 0 - 5.000 U/min power requirement 16,5 / 11 kW rapid speed 30 m/min number of tapers in turret head 12 VDI 30 number of driven tools in turret 6 Spindel speed of driven tools 4500 U/min Spindelpower on driven tool 8,4 kW tail stock Ja/ Yes weight 3,2 t dimensions 4,4 x 2,05 x 1,8 m CNC-Lathe with driven tool Only 3950 h spindle time! Dslhccqozr Rntemsck Equipment: - chipconveyor - 3-jaw chuck Kitagawa Ø 210 mm - some toolholders VDI 30 - 1 + 1 driven toolholder - programmable tailstock - DMG SLIMline Panel with ShopTurn - Signal lamp - tool measuring - programmable tailstock

Condition: good (used), FANUC 31i-B control system C-axis on both spindles Milling drive on the upper turret Dcolhsztdaxoccqmek Milling drive on the lower turret B-axis on the upper turret: +/- 91° Y-axis on the upper turret: +/- 40 mm Y-axis on the lower turret: +/- 32.5 mm Larger main spindle: A5 Bar diameter: 51 mm Larger counter spindle: A5 Bar diameter: 51 mm Polygon turning function Unloading with gripper hand on the upper turret Intelligent handwheel AME inclined bed filter system 10-70 bar

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW Dolhccqoztdaremock bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. Dslhcezr Hyfecqmock - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor