Used accessories and spare parts for milling machines for sale (281)

Condition: good (used), Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley Helhopul U Hecdwzsnk -Timing belt pulley: Ø 160 mm -Type: 34-14M-85 - Pitch: 14 mm / belt width approx. 85 mm -Receptacle: Taper clamping bushing optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 160 x 100 mm -Weight: 7.5 kg

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley Hnsljy Aklvshcdwzek -Manufacturer: optibelt, timing belt pulley Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 3x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts Hnslhcdeu Npgwswzok -Clamping tool: Clamping screw set with storage box -Type: various designs, see photos -Thread: M20 -Price/Fee: complete -Box dimensions: 380/315/H60 mm Total weight: 11.7 kg

Condition: good (used), Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 95 mm -Clamping height: 85 mm -Number: 4x tensioners available -Price: per piece Hjlhoyzmklecdwzenk -Dimensions: 180/35/H70 mm -Weight: 1.0 kg/piece

Condition: good (used), Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 54 mm -Clamping height: 58 mm -Number: 4x tensioners available -Price: per piece Holhceyzgfvsdwzonk -Dimensions: 135/35/H70 mm -Weight: 0.9 kg/piece

Year of construction: 2002, condition: good (used), Hinge width 300 mm Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Holjmdqx Hohcdwzjnk Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), ///// PRICE LISTED PER 1 PIECE ///// Manufacturer: ALGRA Type / markings: D3A030012/0 21-451-003 D3A030011/6-3 23-1151-012 I am offering ALGRA drive gearboxes used in metalworking machines. These components serve the function of power transmission and feed rate adjustment, most commonly used in: - conventional milling machines - machining centers - industrial machines as drive modules Hnslhcdwsyz A U Hjzsk Robust, heavy-duty construction – typical components for continuous industrial operation. ⚙️ Technical condition Condition: used Show normal signs of use Mechanically complete Knobs and mechanisms operate correctly Possible storage marks 📦 Included ALGRA gearbox (exactly as shown in the photos) 📏 Application - feed drive for X/Y/Z axes - machine tool gear systems - spare parts for milling machines and industrial equipment - maintenance / machine servicing ℹ️ Additional information Markings stamped on the housings (visible in the photos) Inspection plates "QS-IN PRÜFUNG" Oil-filled design (sealed gearbox) Possibility to sell individually 🚚 Shipping Shipping via courier or on pallet Personal collection possible

Condition: repair required (used), Hydraulic vise, machine vise, NC compact clamp -Handover in its current condition as inspected The vise has no spindle and is therefore sold as a source of spare parts. Hnjlsb A Ik Djhcdwzjk -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

Condition: good (used), Horizontal milling device – counterholder Hnslhovr Stuecdwzok for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: like new (used), Universal milling table is in very good condition. Hnslhjhtyxwocdwzek

Condition: like new (used), 4 pieces used deep clamps, brand AMF Type 6490-14 Hnsley Ahv Sjhcdwzjk Width = 40 mm Length = 80 mm Slot width = 14 mm Thread = M10

Condition: good (used), DECKEL universal table - small - , used Clamping surface 800 x 240 mm Weight estimated approx. 0.1 t Hjlhcdwey Ahnzozonk

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, table clamping surface: 520 x 1000 mm 6 clamping grooves: 16 mm groove spacing: 90 mm Clamping plate horizontally rotatable to the right and left by: 45° each tiltable from/to the machine by: 15° each swivelling to the right and left: 15° each permissible load movable approx.: 1000 kg permissible load rigid table approx.: 1500 kg weight: 376 kg Hnelhcdob Hmbpjwzjk Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV

Year of construction: 2000, condition: used, table clamping surface: 800 x 425 mm 6 T-slots 14-H7, slot width: 63 mm table swivels left/right: 45° Table inclinable from/to the machine: 15/45°. Table top rotation range 360°, resolution: 0,001°. max. workpiece weight: 300 kg Dead weight: 340 kg Hnolhceb N Acmedwzjk

Condition: used, manually movable Helhcdwjccxgwozjnk Table or base plate size (same size): 460 x 150 mm Overall height: 45 mm Weight (weighed): Guide slightly grooved!

Condition: ready for operation (used), Table size: 130 x 265 mm Table height: 180 mm Hjlhcoyv D Dredwzsnk

Condition: ready for operation (used), Table diameter: 250 mm Table height: 105 mm Hjlhjyv D Ahecdwzsnk

Condition: good (used), 2 brackets for fixed bed milling machines Sizes: Hnslhsudvh Iecdwzek -Square 1: 370x620x2000mm -Square 2: 370x615x2000mm

Condition: used, Diameter: 630 mm Height: 170 mm Dividing head base on table: 690 mm Taper: Morse 5 / 65 mm Admissible weight: 550 kg Hnslhcdsw H Rmzjwzek Dividing head weight: 302 kg

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Hnjloyqwxdohcdwzsk Year of manufacture: 2011 Weight: 26,000 kg

Year of construction: 1990, condition: used, Control panel Grundig for COVER FP 5 A DIALOG 11 Hnjlok Rqcnehcdwzjk incl. handwheel/switching element Year of manufacture 1990

Condition: excellent (used), approx. 100 roughing cutters (28474) Hjlhcdor Hbtyewzonk Diameter 8 - 37 mm HSS 1 drawer contents

Condition: good (used), Several measuring probes from Heidenhain are available for sale. - Manufacturer: Heidenhain - Type: TS110 / TS111 untested = €450 each TS110 / TS111 tested = €750 each TS220 / TS230 = €950 each Hnolhcdwshlafnezsk ! Since several probes are for sale, please specify the desired type! - Holder: SK50

Condition: excellent (used), stable angle table, used Holhcjywtdqedwzonk Clamping surface 800 x 360 mm 5 T-slots Distance = 65 mm

Condition: used, diameter / mm Cutting (quantity) / 0 Hnelhcsymgbtodwzjk weight / kg length 1635 mm