Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Spindle taper ISO 40 Spindle speed 25-2000 RPM 18 steps Speed 5-400 mm / min. 18 steps Rapid traverse speed 1400 mm / min. Main spindle motor power 3 KW F8mywcvj8 Power supply 400 Volt, 50 Hz, 10 KW 3-axis digital display and glass scale - central lubrication -Machine lamp -Electrical panel on the side of the machine -Coolant system in the machine foot -Miscellaneous accessories available, such as milling heads, etc. and another (see photos) more
4
x-travel:700 mm y-travel:200 mm z-travel:400 mm feed of table - X-way:10,5 - 294 mm/min Vpzft0lor feed of table - Y-way:5,2 - 147 mm/min table-size:1000 x 250 mm spindle taper MT:4 spindle turning speed range:37 - 750 U/min total power requirement:2,3 / 3 kW weight of the machine ca.:2300 kg dimensions of the machine ca.:1300 x 1400 x 1700 mm more
5
Milling, horizontal milling machine, tool room milling machine -Machine is faulty and outdated Clamping table 1600 x 460 mm Traverse path x/Y/Z 1100/350/350 mm Spindle retainer SK50 -Drehzahlen 28-1400 RPM 2000/2200/H2150 dimensions mm S0v97mfrc Weight 3700 kg more
3
x-travel: 880 mm y-travel: 300 mm z-travel: 300 mm turning speeds: [...] 18step U/min feed: [...] 18step m/min rapid traverse:: ja tool taper: SK 50 Distance- spindle nose to clamping surface: min/max:100/400 mm table surface area: 1250x330 mm electrical connection: 380 / 50 V / Hz. Ytswgxow total power requirement: 8 kW weight of the machine ca.: 3,2 t transport measurements machine: 2,2 x 1,5 x 1,8 LxBxH m dimension machine [...]: 1,7x1,65x2,0 m dimensions electric cabinet LxWxH: 0,9x0,5x1,8... more
x-travel 600 mm y-travel 560 mm 20femmh3i z-travel 560 mm control Siemens 840 D turning speed range 1 -15.000 U/min tool taper SK 40 weight ca. 10,0 t Machining center -horizontal Deckel Maho (DMG) DMC 60H Internal coolant supply through the spindle center Coolant system Chip conveyor discharge machines bac more
6
Traverse paths x-y-z: 360/390-260-150 mm Table: 720 x 190 mm Table clamping surface 610 x 135 mm Speed range: 100 to 4800 RPM Spindle retainer: SK 40 Feeds: 6 mm to 1100 mm / min (X-axis) Connection: 1.1 / 1.8 kW Accessories: control PE15 Condition: good Weight: 1 t Dimensions: 1100 x 1000 x 1500 mm dimensions cabinet: 600 x 300 x 1000 mm Etbdean more
1
x-travel 1000 mm y-travel 350 mm z-travel 140 mm total power requirement 11 kW weight of the machine ca. 3,8 t H9itbckdi Table size355 x 1,500mm Table travel, longitudinal, manual / motor-driven1,000mm Milling slide travel, vertical, manual / motor-driven350 / 330mm Mounting height between table and middle of milling spindle 50 - 400 mm 18 table feeds, longitudinal16 - 1,600mm 21 milling slide feeds, vertical4 - 400mm/min Table quick feed4,000mm/min Max. load on table, approx.600kg Spindle... more
1
x travel 6000 mm y travel 1400 mm z travel 2000 mm ----- WORKING RANGE -CUBIC- - X-axis travel 6000 mm - Y-axis travel 1400 mm - Z-axis travel 2000 mm Pt3qfr7l MILLING SPINDLE / HEAD - spindle type: horizontal - spindle revolutions (max) 4000 /min - tool fixture: ISO SK 50 - spindle torque 2000 Nm AXIS DRIVES - traverse velocity X (min) 1 mm/min - traverse velocity X (max) 20000 mm/min - traverse velocity... more
5
Groove milling machine, milling machine Traverse path x/y/z 200/200/350 mm -Drehzahlen from 250 to 2000 RPM Dimensions W/D/H 1200/1100/1400 mm Lh9d7 more
4
x-travel: 800 mm y-travel: 220 mm z-travel: 380 mm distance between column - table edge: min./max. 65/285 mm Distance Spindle center - surface area, max:: min./max. 35/415 mm tool taper: SK40 table-size: 1250 x 340 mm table surface area: 1120 x 250 mm 7nj0wihmd table load capacity - central/maximum: 1500 kg milling head speed: 45 - 2800 / 16 step U/min feed:: x/y: 10/630 mm/min voltage: 380/50 V / Hz total power requirement: 5,0 kW Weight approx.: 1,7 t machine dimensions LxWxH: 1,47x1,32x1,68 ... more


Milling ma...
every day

New machines via email!

Be informed!
6
x-travel 800 mm y-travel 710 mm z-travel 710 mm tool taper SK 50 spindle turning speed range 10.000 U/min Horizontal Machining Center DMG DECKEL MAHOD MC 80H HiDyn Machine is overhauled after ordering Verfahrgeschwindgkeiten ----- Linear: max. 40m / min Rotation: max. 15 U / min main spindle ----- Power: 37 kW Type: Skewer (spindle by Praezisionskupplung with motor shaft , characterized low Ueberholungskosten) Storage: Hybrid tool changer ----- Number of bays: 40 Type: fa... more
4
Traverse paths x-y-z: 850 - 330-380 mm Table: 1,130 x 300 mm Speed range: 56-2,800 RPM Spindle retainer: SK 40 Feed: 10 to 630 mm / min Port: 9,5 kW Accessories: Head swiveling; Condition: good Weight: 1,6 t Dimensions: 1,700 x 2,000 x 2.400 mm F73yc3iug more
5
x-travel:350 mm Uczufjeih y-travel:150 mm z-travel:295 mm tool taper:40 ISO Clamping area of the table:800 x 220 mm number of T-slots:5 spindle turning speed range:100 - 4480 U/min total power requirement:1,1 / 1,8 kW weight of the machine ca.:780 kg dimensions of the machine ca.:1250 x 1160 x 1600 mm more
6
General repair 1976 Clamping table dimensions: 315 x 1250 mm X: 850 mm Y: 270 mm Z: 355 mm Input: 8 kW Machine dimensions: 2200 x 2600 x 2100 mm Gvgw3c Machine weight: 4000 kg more
5
Groove milling machine, milling machine, universal milling machine Hhrpfb3yc Traverse path x/y/z 200/200/100 mm Collets recording MK4 Collets diameter 4/6/8/10/12/12/16 mm Vice Dimensions 900/700/H1440 mm Weight 334 kg more
3
x-travel 1600 mm y-travel 400 mm z-travel 400 mm turning speeds 22-900 U/min total power requirement 5,5 kW weight of the machine ca. t dimensions of the machine ca. m Btil8tga more
4
Table size: 1500 x 400 mm Stroke length: 1200 mm Cross: 350 mm vertical: 450 mm Vertical power: 4,0/5,5 kW Speeds 16 levels: 32-1400 RPM Horizontal drive power: 4,0/5,5 kW Speeds 16 levels: 32-1400 RPM Tool holder horiz. vert.: ISO 40 18 feeds longitudinal & transverse: 16 800 M93jb vertical: 6.4-320 Rapid traverse, longitudinal and transverse: 3500 mm / min vertical: 1400 mm / min Approximate weight: 3800 kg with: -Vertical milling head more
5
Hello sell a watchmaker type Aciera F1 with accessories. The machine is up on the paint in good condition. Hardly any backlash on the spindles, the guided tours are in good condition. Ba8tyc2a0v The machine should be picked us are paid cash. Many greetings Karlheinz Mohr more
1
movement longitudinal:600 mm movement crosswise:210 mm movement vertical:450 mm :SK 40 spindle turning speed :31,5-1000 Upm feeds in all directions :8-200 mm/min motor :380 50 2,8 V Hz kW range L-W-H:1200 1300 1500 mm Jtja2y machine weight ab.:1100 kg more
6
DtieikoxGO 1971 X: 800 mm Y: 280 mm Z: 300 mm Outside table dimensions: 450 x 1400 mm The largest table load: 785 kg Spindle taper: 50 mm Max. Spindle distance from table: 490 mm The number of degrees: 18 Range: 28 to 1400 rpm. Motor for spindle drive: 10 Kw Electric motor for feed 2.2 kW Machine floor space: 2980 x 2130 mm Machine weight: 3600 kg more
5
Milling machine, vertical milling machine, tool room milling machine Machine is improved Clamping table 1250 x 280 mm Traverse path x/Y/Z 850/280/400 mm Spindle retainer SK50 -Drehzahlen 28-1400 RPM Luxx2 Dimensions 1300/1800/H2200 mm Weight 3500 kg more
3
x-travel 300 mm y-travel 150 mm Lkpbx z-travel 270 mm total power requirement 2,6 kW weight of the machine ca. t dimensions of the machine ca. m Horizontal Milling Machine more
6
x-travel: 800 mm y-travel: 200 mm z-travel: 380 mm tool taper: SK40 table clamping surface:: 1120x250 mm Total power requirement: 6,0 kW Weight approx.: 1,7 t dimensions of machine: 1,47x1,32x1,68 mm distance rear edge table / column guidance: min/max: 65/285mm distance spindle center to clamping surface:min/max: 35/415mm distance spindle nose to counter bearing:min/max: 0/450mm machine base On sale as is, for a small budget! For reconstruction or spare part deliverer. E87ecof [...] more
2
Max travel X-axe 1000 mm Max travel Y-axe 400 mm Cpld8ufn3 Max travel Z-axe 450 mm Boring head ISO 50 Spindelspeed 1800 rpm Table size 1400 x 400 mm Power on spindel 11 kw Power needed 16 kw weight 4,4 ton With tools and accessories more
2
Horizontal milling machine Fabr. IBERIMEX (CME) type F 900 Masch.# 75128, built in 1975 Technical data: Tischlaengsweg X 400 mm Cross table travel Y 80 mm Table vertical way Z 300 mm I3d8qdr Table size 500 x 140 mm Spindle carrier ISA 30 12 spindle speeds 80-2000 RPM. Power 1.5 HP Weight 420 kg Dimensions 800 x 900 x 1400 mm used, in very good condition more
6
General repair in 1972 Working area: 160x630 mm Ivutc7hxy The machine is in good technical condition and fully working. more
6
Traverse paths x-y: 550-180 mm Baymfonme9 Spindle stock vertically by hand: 300 mm Table: 600 x 180 mm Distance from table - Center Milling spindle: Max 300 mm Speed range: up to 2,400 rpm infinitely variable 40 Spindle retainer: SK 30 Feed: 10 to 500 mm / min Rapid traverse rate: 2,000 / / 4,000 mm / min Connection: 3,2 kW Accessories: programmable cam controller; Operating instructions Condition: good Weight: 1,1 t Dimensions: 1,800 x 1,000 x 1,600 mm more
3
DESCRIPTION x Trail: 655 mm y path: 406 mm z path: 406 mm tool holder: ISO 40 speed range - continuous: 48-3700 RPM table adjustable in height: by hand, 406 mm table movable transverse: manually 406 mm distance Hinterkant table stand management: 2-410 mm distance spindle Center Clamping surface, max: 55-461 mm clamping surface: 1118 x 254 mm table burden: 200 kg spindle head swiveling left and right: 90 ° headstock: tilt / tilt able 45 ° feed: x-axis 20-550 mm / min total power requirement: 2,4... more
4
x-travel: 690 mm Vb9gc y-travel: 400 mm z-travel: 500 mm table clamping surface:: 1250x250 max. table load: 1500 kg spindle speeds:: 18 Stufen/step 55-2800 U/min height over floor: 1350 mm feed: 10-630 stufenlos m/min tool taper: SK40 total power requirement: 6,3 kW weight of the machine ca.: 2,0 t machine dimensions LxWxH: L:1,8xB:1,7xH:2.0 m The working table can be adjusted manual or electric and is equipped with 4 t-slots. The throat of the counterholder boom = 500, the total length = 105... more
6
Nr. 3405: Kr8ld 1 used Horizontal Milling Machine Fabr. RECKERMANN Typ FU 1000 Bauj. ca. 1975 Table Surface 1200 x 250 Workrange: 900 x 340 x 380 mm, Spindle SK 40 Speedrange 30-1500 min-1 Feed Rate 4 / 11 bis 230 / 570 mm/min Weight ca. 1700 kg More Details find in enclosed PDF more
3
Tool holder: SK 40 Travel (x/y/z): 450/200/430 mm Spindle speeds: (18) 30-1280 RPM Feeds: 13,1-328 mm / min Engine power: 1,8/2,6 kW Facilities: Div. long dollies, 2-axis digital display, machine feet, rapid traverse in two axes, swiveling table, coolant, lubrication L7rx7 more
6
Traverse paths: X axis (longitudinal movement) 1120 mm Y-axis (Cross movement) 345 mm Z axis (vertical movement) 400 mm Clamping table: 400 x 1600 mm Aufpannflaeche Table load 1500 kg Table tilting +/-45° Spindle head: tool holder 50 SK speed 28-1400 RPM 11 kW 2q8dakq8i Feed: X-, Y axle 16-800 mm / min Z axis 5-250 mm / min Rapid traverse: X-, Y axle 3,150 mm / min Z axis 1000 mm / min Power: 14.5 kW Weight: 3.9 t Space requirements: L x W x H 2.3 x 2.0 x 2.6 m Accessorie... more
4
table mounting size: 230 x 1000 mm table movement x: 600 mm table movement y: 230 mm table movement z: 385 mm 2ipxtjx8 spindle taper: ISA 40 spindle turning speed range: 40 - 980 rpm carriages: 18 - 320 mm/min engine: 220/380 V, 0,7 PS kW space needed: 1200 x 1550 x 1600 mm weight: 1000 kg more
6
Workspace: Adjustment of the cross support -horizontal (X-axis): 600mm -vertical (y axis): 450mm Adjustment of spindle -horizontal transverse axis (z axis): 450mm Work spindle speeds, direct programmable: 20-3150 RPM Correction of the programmed speeds (override): 80-120% Feeds, directly programmable: -x -, y -, and z-axis: 1-3000 mm / min Dimensions: 97qvpmca9 -Length: 2885mm -Width: 2460mm -Height: 2000mm -Weight: 2900kg Control: CNC 432 Accessories: -Machin... more
4
Procedures themselves. x-y-z: 800 - 190-360 mm Hamd x-y-z travel: 820 - 220-380 mm Table: 1000 x 250 mm Speed range: 28-2,800 RPM Spindle retainer: SK 40 Feeds longitudinal and transverse: 10 to 630 mm / min Vertical adjustment: 4 to 252 mm / min Rapid traverse, longitudinal and transverse: 3,150 mm / min Rapid traverse vertical: 1,260 mm / min Connection: 8 kW Accessories: Condition: good Babx9yitpb Weight: 1.7 t Dimensions: 2,500 x 2,400 x 1.600 mm more
4
Horizontal milling machine with pivoting vertical milling head (3510.3), table 315 x 1000 mm, x/y/z 710/260/420 mm, SK 40 speed range = 45-2000 rpm, feed range 16-800 mm / min. Speed 4 m / min, weight approx. 1.5 t 99bi2uuac more
Ladies and gentlemen! Below we offer subject to change: Make: Ruhla name: H. Milling Machine Type: FUW Year: 1968 Specifications: Table size 760 x 250 mm Gmgo0223 more
2
Milling machine Manufacturer: Steinel Mskado more
3
TRAVERSES: X = 2500 mm Y = 1000 mm Z = 900 mm CONTROL SYSTEM: HEIDENHAIN TNC 426 CB MILLING HEAD: Automatic indexing milling head 2,5° x 2,5° TOOL TAPER: 0g3qws32 ISO 50 DIN 69871 ADDITIONAL EQUIPMENT: - External and internal coolant system, Tank 350 l - Automatic tool changer ATC 30 - Swarf conveyor - Handwheel HR 410 - Renishaw more
6
Workspace: Adjustment of the cross support -horizontal (X-axis): 500mm -vertical (Y-axis): 400mm Adjustment of spindle -horizontal transverse axis (Z-axis): 400mm Spindle speeds: 50-2500 RPM Feeds: -x and z-axis: 5-1000mm / min -y axis: 5-670mm / min Givsifb Dimensions: -Length: 2360mm -Width: 2600mm -Height: 1852mm -Weight: approx. 1900kg Control HEIDENHAIN TNC 135 ST Accessories: -various cutter heads -Machine vise -Manual The machine was overtaken in 1... more
2
Hor.-milling machine Fabr. RUMAG REG type 5 Masch. # 383 come. # 34280 built in 1975 Technical data: Table size 700 x 200 mm Traverse path X-axis 350 mm Stroke Y-axis 170 mm Z axis stroke 250 mm Yn2ticdl2 Spindle mount MT 3 18 spindle speeds 71-2800 RPM. 9 machine. Table feed 16-500 mm / min 2.0 kW External dimensions approx. 1200 x 1200 x 1600 mm Weight 800 kg with -Cooling device -Tischlaengsvorschub -Vertical and lateral movement manually -Holder -Hor. Milling used, in g... more
6
DIAG Fritz Werner plan machine or horizontal milling machine, table 355 x 1800 mm, Longitudinal adjustment v. hand 1530/1500 mm, vertical adjustment v. hand 350/330 mm, 18 speed v. 35.5-1800 mm, tailstock adjustment 140 mm, # 50, recording 18 spindle rotation 99bfsxwdx pay 16-800/4-200 mm / min, rapid traverse along 4000/1000 mm, 35,5-1800 rpm 18 feeds /. min, Max. Table load 600 kg, 380 V, 50 Hz, 27 A, weight approx. 3800 kg more
6
Hersteller: ELU Typ: AS70 220/380V - 50Hz 3,8/2,2 A Dvqlxt0 740 W 12000/min Masse ca.: 140x60x40cm more
6
Travels xyz 380 - 140 - 230 mm Table: 630 x 200 mm Speed ​​range: 132-750 U / min spindle taper: SK 30 feed: 10 to 125 mm / min Power: 2.2 kW Accessories / Features: Condition: good Weight: t 1 dimension: 1,200 x 800 x 1,500 mm Ktk2gfpui more
4
Procedures: X = 4200 mm Y = 1670 mm Ywux9vw9 Z = 1050 mm table size: length 6000 mm and 1030 mm wide Control: HEIDENHAIN TNC 155 control Head: UNI 2 universal milling head, adjustable manually in every nook and cranny – maximum transmittable power: 30 kW incl. automatic Tool clamping -electronic measuring device for accurate positioning of the These milling heads in all 90 ° positions -Display unit installed in the control panel Tool holder: ISO 50 DIN 69871 Amenities... more
4
.. Horizontal milling machine console WMW Heckert Fabr Type FU 315x1250 / E Fabr 316204/196, built in 1990 Specifications: Table Size 315 x 1250 mm table load 1000 kg Tischlängsweg 850/880 mm 270/300 mm Tischqürweg Tischsenkrechtweg 355/385 mm swivel range of worktable to each side 45 of the spindle bearing diameter 110 mm tool holder ISA 50 18 spindle speeds 28-1400 rpm. 18 longitudinal and Qürvorschübe 16-800 mm 18 Senkrechtvorschübe 5-250 mm rapid traverse and crosswise 3150 mm 1000 mm R... more
1
Table: 250 x 1000 X/Y/Z way: 700/200/300 mm NMax: 1500 rpm. X79aphzf Weight: 800 kg Power supply: approx. 3 KW tool consumption: SK40 Condition: good more
6
Horizontal, with vertical head 73y2q0e7e Travel distances X / Y / Z: 820/300/400 mm, Weight: 2 t, tool holder: SK 40, Clamping surface table: 1000 x 250 mm more


Milling ma...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close