Used Milling machines - univ.NC/CNC 400-499mm X-axis travel for sale (50)

Condition: excellent (used), Functionality: fully functional, Hermle UWF 802M universal milling machine with Heidenhain TNC124 linear control in excellent condition! Technical specifications: >> Year of manufacture approx. 1995 Machine no. 9804 >> Fixed angle table >> Speed: 17 to 3550 rpm Bwoliniowfq Hfsaxel >> Continuous feed in 3 axes from 0 to 1600 mm/min >> Drive power: 6 kW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and equipment: >> Heidenhain TNC124 linear motion control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Operating instructions About the machine: Offered is a Hermle UWF 802M tool milling machine with Heidenhain TNC 124 path control. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No extensive CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Hermle on site with power on.

Condition: good (used), Year of construction: 2003, Hermle C30 U 5-axis CNC milling machine. Very good condition. Bweliev Aydponiaxol Still in use and can be tested under power. Price greatly reduced!!!!!

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. Bweliniasich Ehsxol With counter bearing for horizontal milling. Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Machine documentation available Machine is ready for demonstration.

Condition: good (used), Year of construction: 1986, Milling machine Deckel FP3NC Manufacturer: Deckel Type: FP3NC Year of manufacture: 1986 Control: Dialog 4 Condition: used Travel paths: X 400 / Y 400 / Z 400 mm Quill stroke: 80 mm Speed: 40 rpm. Up to 3600 rpm. Pivoting milling head. Hydraulic tool holder vertical/horizontal SK40 Electronic handwheel. Control bar. For changing tools and starting programs. Documentation. Lamp. Coolant system. Full cabin. NC T400 rotary table Weight: approx. 2000 kg. Bwslijwbqmkjniaxol Control cabinet weight: 300 kg

Year of construction: 1994, Condition: excellent (used), Cover milling machine FP 2A with control Dialog 12 + vice Bjlinisfgmbdsaxowl

Condition: good (used), Year of construction: 2014, Serial No. 143703, digital display, Heidenhain, table, 600 x 200, X/Y/Z travel, 300 x 350 x 200 mm, max. speed 2,200 rpm, machine lighting, steel cabinet with 2 doors, tool carrier system, 3 levels, contents: lot of SK30 tool holders, tool changers Bwsliowazpmoniaxol +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1989, Functionality: unexamined, MACHINE IS NOT UNDER OF POWER, THE MACHINE IS COMPLETE,LOADING FOR FREE Beliniajwgbalsxjwl

Condition: used, Year of construction: 2010, x-travel 0450 mm y-travel 350 mm z-travel 400 mm table-size 800 x 400 mm spindle taper ISO 40 spindle turning speed range 10- 5000 U/min feeds 10- 5000 mm/min rapid traverse 5 m/min total power requirement 10 kW Bwjlisv Anlboniaxel weight of the machine ca. 2 t dimensions of the machine ca. 2,5 x 2 x 2 m Machine has a EMCO easy cycle positioning control and many accessories.

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill Bjlinisrb A Tcsaxswl electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min Bslieu U E T Ijniaxswl feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m

Year of construction: 1983, Condition: used, Hermle UWF 700 Brief description: Universal tool milling machine Universal tool milling machine Hermle Type UWF 700 Bwolinijkhc A Djaxsl year of manufacture 1982 table 700 x 285 mm travel X / Y Z 400 / 290 / 380 mm mounting SK 40 spindle speed 40 - 2000 rpm quill stroke 63 mm drive power 2,2 kw Digital display counterholder weight 1500 kg

Condition: not inspected (used), Please see technical details on photo. Bolinijhvzxzoaxswl

Condition: used, Year of construction: 2007, x-travel 480/500 mm y-travel 230/250 mm z-travel 380/400 mm speeds 45 - 2240 U/min table surface area 1000 x 250 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 3 kW weight of the machine ca. 1550 kg dimensions of the machine ca. 2600 x 2200 x 1800 mm Bjlot Tqw Djiniaxowl - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual

Condition: good (used), Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Bwolinjt Dat Ajiaxel Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 Bwelijv R E Rdjniaxel GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: good (used), 1 used tool milling machine Micron brand Type WF 2/3 DP with Heidenhain Type 135 linear motion control Travel X/Y/Z 400/410/400 mm Bweliniajv N Dzfexjl Table clamping area 800 x 450 mm Speed 30 – 2240 rpm Feed rates 1 – 750 mm/rev Rapid traverse 2000 mm/min Tool holder ISO 40 Machine weight approx.: 1.4 t Space required approx.: 2.1 x 1.6 x 2.2 m

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, table width: 630 mm, table length: 630 mm, table load: 1,000 kg, overall weight: 9,500 kg, Equipment: rotational speed infinitely variable, Selling a Hermle C30U 5-axis simultaneous machining center! Built in 2011 with a Heidenhain iTNC530 control! Travels: X: 650mm Y: 600mm Z: 500mm Swivel range A: +30/-115 degrees Rotation range C: 360 degrees Equipment: Control: Heidenhain iTNC530 Spindle speed: 18,000 rpm Spindle mount: HSK-A63 Tool changer: 32 positions NC swivel rotary table: 630mm diameter A-axis off-center Bslinisv In Utjaxjwl 6-position rotary feedthrough 80 bar internal coolant with paper belt filter (Vario valve) Scraper belt conveyor Manual cabin door Manual cabin roof Safety screens Blum A2 tool measurement and breakage detection Heidenhain measuring probe Electrical heat compensation Chip flushing gun Bed flushing Air seal for scales Status light Pneumatic extension Release/reclamp M-functions NC stop on external signal etc. Accessories: approx. 30 HSK-A63 tool holders Heidenhain measuring probe Machine feet Complete documentation Machine will be available approximately in week 30 and ready for immediate use! Machine can be inspected under power by prior appointment. Videos can be provided upon request. Hours are subject to change, as the machine will be in production until the final cut! We will load the machine!

Condition: excellent (used), Year of construction: 1994, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: 001, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 10,000 rpm, total height: 2,250 mm, total width: 1,550 mm, total length: 1,800 mm, table width: 500 mm, type of input current: three-phase, table load: 100 kg, overall weight: 2,200 kg, input voltage: 400 V, control cabinet height: 1,460 mm, control cabinet length: 690 mm, control cabinet width: 1,200 mm, input current: 16 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, 3 axis CNC-milling machine with a high speed spindle. Frame built out of ground plutonic rock (Granite, same as measuring and control surface plates) sitting on a welded steel frame. Linear bearings and ball screws made by high end German company (specific name lost), spindle is made by Spintech (German), water cooled and has an ER12-collet holder, pneumatic tool changer. Servos are Robbin Myers. With proper settings and fresh tools this machine can mill within 0.005mm. Bjlinovgrmqoiaxowl CNC operating system is HEIDENHAIN. Most of its working life it has been milling high precision anodes in carbon positives for spark-erosion cutting, so it has never been exposed to heavy forces, last ten years it has worked very few hours as a hobby machine cutting plastics and some small amount of brass. Spindle and the X-axis Angular contact ball bearings has been refurbished about 3 years ago and has seen very little use after that.

Condition: refurbished (used), Functionality: fully functional, travel distance X-axis: 425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 42,000 rpm, table load: 60 kg, overall weight: 6,000 kg, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine is completely overhauled, tested and measured in our company. The machine meets the new machine tolerance again! Travel paths: X455mm, Y400mm, Z240mm Belistt Atwjniaxewl Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - 42-way tool changer - High-precision cooling device for the entire machine (hysteresis +/- 0.15K) - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/cone angle) and wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimum quantity lubrication - HSK40E spindle with max. 42,000 rpm - Erowa ITS100 zero point clamping system integrated in the machine table - Automation package for retrofitting the machine with a pallet changer - Handbox A tour of the machine in Ready-to-use condition is possible at any time. You are welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: excellent (used), KRYLE VMC model : VMC 500 B Bwoliniastq A N Rsxjl control : FANUC table : 750x400 axis : X500 Y410 Z400 speed spindle : 60 - 6000 RPM taper : BT40 ATC : 16 pos year : 1991 books weight : 3500 kg fixed price free loaded on a truck

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical Bwelinijtv Riasaxel milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: good (used), Year of construction: 1994, Functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Tool holder SK40 Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Bwsliniorvitleaxjl Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Maho CNC milling machine offered. Type: MH 400 E Control unit: Philips CNC 432 X-travel: 400 mm Y-travel: 375 mm Z-travel: 250 mm Table: 250 x 800 mm Spindle: ISO 40 Speed: 80 - 4000 RPM Central lubrication system Included documentation and parameters Weight: ca 1250 KG Dimensions: 220x185x190 cm LxWxH For more information call us or send an e-mail. Bjlinegxvf Aeiaxjwl

Condition: refurbished (used), Year of construction: 2000, operating hours: 27,825 h, Functionality: fully functional, machine/vehicle number: 1093 0001613, Equipment: documentation/manual, used DMU 80 TNC 430. According to photos Without tools or vice complete operating instructions Reviewed annually. Bought used. 1-shift operation Beliniajt Skhyjxjwl Always avaliable

Condition: used, Year of construction: 1988, x-travel 0600 mm Bsliniju Rt I Ioaxjwl y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.