Used extraction systems for sale (71)

Condition: used, Year of construction: 2012, machine/vehicle number: 02 13 2202, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, volume flow: 16,000 m³/h, suction capacity: 16,000 m³/h, actuation type: electric, Equipment: CE marking, documentation/manual, Industrial dust extraction and filtration system, built in 2012 by the Italian company SILVI & C. S.r.l. The system is complete with a 22 kW fan, cartridge filtration system, automatic filter cleaning using compressed air, control panel, and STS CO₂ fire suppression system. Technical specifications: Manufacturer: SILVI & C. S.r.l. – Italy Year of manufacture: 2012 Serial number: 02 13 2202 Airflow rate: 16,000 m³/h Static pressure: 350 mm H₂O (approximately 3,430 Pa) Electrical power: 22 kW ATEX classification: II 3D – Zone 22 – T 150 °C Bwodpfx As Ahrk Nenpew CE marking Electrical supply: 400 V Equipment: 22 kW industrial fan Cartridge filtration system Automatic compressed air filter cleaning system TURBO electronic control unit for filter cleaning management Main electrical panel with controls and protections STS CO₂ fire suppression system Two lower containers for dust collection Inspection and maintenance access doors Condition: Used system, functional and complete with fan. Machine manual and electrical diagram dated December 2012 are available. Further information and photographs available upon request. Transportation not included. Any dismantling and loading operations will be agreed upon separately.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 4000000783, functionality: fully functional, input voltage: 400 V, input current: 3 A, input frequency: 50 Hz, type of input current: AC, volume flow: 1,200 m³/h, suction capacity: 1,200 m³/h, intake manifold diameter: 150 mm, noise level: 75 dB, actuation type: electric, total height: 620 mm, total length: 1,450 mm, total width: 620 mm, overall weight: 130 kg, year of last overhaul: 2026, Equipment: CE marking, Fully serviced and inspected dust extraction system. Ready for immediate use. Bedpfx Ans Agvwaopjww

Condition: used, Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector, Used machine Manufacturer: Nederman (Helsingborg, Sweden) Fan type: FQ 561 N4A RD 160L/2P B3 RDO (NCF 160/25) Year of manufacture: 2013 Overall dimensions: Filter unit dimensions: 1650 x 1530 x 4920 mm (1200 x 1510 x 4180 mm) Fan unit dimensions: 1200 x 1100 x 1120 mm Motor and fan parameters: Bwodpfe Ahqhnjx Anpjw Motor power: 18.5 kW (2P, frame size 160, 50 Hz) Max speed: 3000 rpm Features: High-capacity multi-module filter housing with cassette filter elements Built-in control box mounted on the filter unit High-capacity standalone 18.5 kW Nederman NCF 160/25 centrifugal fan Includes ductwork sections and adapters for installation Lower hopper and dust collection bin Suitable application areas: Extraction and filtration of dry dust generated during grinding, sanding, and material handling. High-capacity extraction of welding fumes, plasma, and laser cutting smoke. Centralized dust extraction system for complete workshops or multiple machining stations

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 60 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 400 mm, filter area: 84 m², actuation type: electric, total height: 4,400 mm, total length: 1,400 mm, total width: 1,500 mm, overall weight: 1,500 kg, Equipment: CE marking, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The Absolent dust filter is based on the latest and most efficient filtration technology. This solution works particularly well in installations operating in continuous mode (24/7). Dust-laden air is drawn in through an inlet located in the upper part of the filter. The heaviest dust particles fall directly into the dust collection container. The air, along with lighter particles, is directed further towards the filter cartridges, where the dust settles. The filtered air is then removed from the device through an outlet using an external fan. When the pressure drop across the filter cartridges exceeds the set limit value, valves open in the cleaning air tank, and a pulse of compressed air is released from the cleaning nozzles. This pulse causes the accumulated dust to detach from the filter surface and fall into the dust collection container. Range of applications: The Absolent A•dust is ideal for processes that generate dry dust, such as: • Welding • Laser and plasma cutting Bsdpfx Ae Ady Dljnpsww • Grinding and polishing Brand: Absolent Model: A•dust5 Parameters: Fan with a power of 18.5 kW. Capacity: 6000 m3/h Vacuum: 6000 Pa Filtration area: 84 m2 Included: Partial ductwork Summer/winter flap Stock number: 1175

Condition: used, Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector, Used machine Manufacturer: Nederman (Helsingborg, Sweden) Filter unit / Extractor type: Nederman Fan type: FQ 401 N4A RD 112 RDO Year: 2013 Airflow capacity: max.: 5200-5600 m3/h operating: 3800-4400 m3/h Overall dimensions: Width: 1250 mm Depth: 1480 mm Height: 2320 mm Motor parameters (Seipee electric motor): Power: 4 kW (2P, 112, 50Hz) Manufacturer: Seipee Protection class: IP55 Features: Built-in cassette / bag filter system Complete electrical control box mounted on the unit Standalone, high-capacity centrifugal fan unit Lower dust collection container / bin Bodpfxs Ahp Dnj Anpsww Suitable application areas: Extraction and filtration of dry dust generated during grinding, sanding, and material preparation. Cleaning of welding fumes, plasma, and laser cutting gases. Centralized or individual dust removal for workshops and machining cells.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 0.14 kW (0.19 HP), input voltage: 230 V, type of input current: AC, volume flow: 1,890 m³/h, filter area: 7.9 m², noise level: 65 dB, actuation type: electric, total height: 575 mm, total length: 600 mm, total width: 590 mm, overall weight: 55 kg, Equipment: CE marking, documentation/manual, LTA electrostatic dust extraction system Intake on the right The intake nozzle can be screwed on as needed; currently, there is none, as it was previously mounted directly on the housing wall. In very good, fully functional condition, and naturally completely cleaned. Bwedpfx Ajzqttconpew Available for immediate delivery.

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Bwedpfezq A Ezex Anpjw Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 2 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 20,000 m³/h, filter area: 295 m², noise level: 75 dB, actuation type: electric, total height: 3,643 mm, total length: 2,066 mm, total width: 1,756 mm, overall weight: 1,590 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, NOVUS Airtower FT 20,000 EC – like new – only 2 operating hours For sale is a NOVUS Airtower FT 20,000 for extracting welding fumes in industrial halls. The unit was used exclusively for testing purposes and currently has only 2 operating hours. The Airtower has been technically inspected and is in perfect working order. All features are functioning correctly. There are no damages. Equipment: * NOVUS Airtower FT 20,000 * ECblue efficiency package * NOVUS particle sensor * NOVUS lighting package * Timer * Automatic filter cleaning * 3 filter stages * Total filter area 295 m² * Dust container 200 liters * Plug & Play, no piping required * Forklift attachments and crane eyes Technical data: * Airflow rate: approx. 20,000 m³/h * Motor power: 15 kW / 400 V / 50 Hz * Dimensions: approx. 2,066 x 1,756 x 3,643 mm * Weight: approx. 1,590 kg * Sound pressure level: < 75 dB(A) Bwjdjzfx Riepfx Anpew A guard was removed during the testing phase and has already been reordered. This will be professionally installed before delivery. Price: €27,900 net, negotiable, plus VAT. Sale exclusively to businesses. Location: 48691 Vreden. Inspection possible by appointment. Loading can be arranged on-site.

Condition: used, functionality: fully functional, Used Teka fume extraction unit for wall mounting. Can also be placed on the floor, as a stand is included (custom-built by the previous owner). A new control unit has been installed. Connection options: 2x D150. Bjdszzwhxopfx Anpsww The extraction unit runs smoothly; a new silencer is included.

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% Bwsdpfeyq Nl Nex Anpow - Stock No.: 1109

Condition: used, Year of construction: 2013, The industrial filtration system is used for suction and filtration of oil mist, emulsion mist and suspended solids from the air, as they arise during metal processing. The multistage filter system cleans the intake air and contributes to the improvement of air quality in the workplace. Mains connection: 400 V Frequencies: 50 - 60 Hz power consumption: 1.5 A at 60 Hz engine power: 1,15 kW Bwsdpez Szaljfx Anpsw

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Bsdo Agw Enjpfx Anpeww Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Bwedpfx Anoy R Aldopsw Fan power: 2.2 kW Airflow: 2,800 m³/h Filtration area: Main filter – 21 m² HEPA filter – 40 m² The device is in excellent technical condition – like new. Stock number: 1134

Condition: used, Year of construction: 2008, Suitable for cleaning coolant- and oil-containing grinding mist. Bwedpfx Ansz Sy Syjpjw Blower capacity: 2400m³/h Suction power: up to 1200 m³/h noise level: 75 dB A Pressure differential: 840 Pa Connection value: 6kW (230V/50HZ) Dimensions W x D x H =: 800 x 625 x 610 mm Weight approx: 100 kg colour: Gray

Condition: used, Year of construction: 2014, 400 V / 50 Hz < 75 dB(A) power capacity 15 kW volume capacity 20.000 m³/h weight 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Bjdpfjz I Ucqjx Anpjww Dust container: 200 liters

Condition: good (used), Year of construction: 2014, functionality: fully functional, Intake temperature: 20° Density at the intake manifold: 1.2 kg/m³ Volumetric flow rate: 8.3 m³/min Engine speed: 2,882 rpm Bsdozn Rfkopfx Anpjww

Condition: ready for operation (used), functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, suction capacity: 6,300 m³/h, intake manifold diameter: 500 mm, noise level: 72 dB, overall weight: 565 kg, The UFO-4-M/N filtering unit is applied for cleaning the dust laden air from impurities arising during the manufacturing processes. It is irreplaceable in capturing the dry dust, formed during welding, grinding the non-sparking materials, gas- or plasma metal cutting and other dust-emitting processes, in chemical, pharmaceutical, plastic industry, and others. Maximum temperature of the forwarded air is +60°C. The appliances are equipped with cartridge filters, capturing dust on the outer filter surface. The accumulated dust (on the filters) is struck off by cyclical compressed air impulses. Filter is fully complete and in excellent condition. Bwodpfszmfuqjx Anpjw

Condition: good (used), Year of construction: 1996, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson Torit, filter system for extraction system -Type: IDFP2 -Cartridge filter: see photos -Inlet/Outlet: Ø400 mm / Ø250 mm -Extraction capacity: 2500 m³/h -Pressure: 2370 Pa -Motor power: 3 kW Bsdpszyt Irofx Anpjww -Filter dimensions: 1800/1200/H1780 mm -Weight of filter: 350 kg -Blower dimensions: 600/750/H1070 mm -Blower weight: 75 kg

Condition: used, ESTA Spänesog-SB 8151 Chip Extractor Bwedpfx Anjznibwspow High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. This system is ideally suited for workshops to extract chips and dust (e.g., during metal or wood processing). Technical data of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amps): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm Bjdpfx Ajytgrxonpsww -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) Bwodpjzukp Aofx Anpew -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: excellent (used), Year of construction: 2008, 1 x Oil Mist Extractor Keller Lufttechnik OENA-0.5-K-H11 Bwjdpsxvrw Dsfx Anpow Year of manufacture: 2008 In very good condition. The extraction unit can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. Bwedpfjtp Thbex Anpow The extraction unit can be inspected at our warehouse.

Condition: used, Acword BR100 Extractor with Workstation Metal extractor from the Acword brand with a Bosch Rexroth workstation and drawer cabinet. Exhaust air capacity: 1010 m3/h Connection nozzle: 100 mm Noise level: 83 dB Inlet under pressure: 2550 Pa Voltage: 400 V, Weight: 65 kg Exhaust air speed: 32 m/s Frequency: 50 Hz, Height: 1490 mm Filtration area: 6 m2 Motor power: 1.1 kW Width: 594 mm Volume of the waste container: 0.0338 m3 Number of phases: 3 Length: 670 mm Complete factory closure; Bwsdpfx Anohufbcopjw large selection of storage platforms, pallet racks, shelving, and paternosters. High-quality industrial machinery, lathes, grinders, and hand tools. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2017, machine/vehicle number: 17002702, Offer 25276 Extraction Filter System / Stationary Filter Unit with Wet Separator Bwsdpfxex Upd Uo Anpow Technical Data: - suitable for moist, sticky dusts, metallic grinding - with heavy spark generation - single and multi-station extraction - volumetric flow approx. 5,150 m³/h - water capacity 390 l - drive power 400 V / 7.5 kW - required space W 1250 x H 3650 x D 1100 mm - weight approx. 550 kg