Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Lodjxnlgcjpfx Ab Torh Storage location: Garbsen

Condition: ready for operation (used), Only 2700 hours with protective device Lrjdpfjykmy Dsx Ab Tjh

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts Ledpfx Abjykvw So Torh - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach

Condition: good (used), Code: 0301 Brand: PAOLONI Model: P45 - CE Standard Panel saw with tilting blade and scoring unit for panels, furniture, custom-made furnishings, doors, wooden window frames, composite materials, plastics, and various materials - CE Standard Lredpfx Abeyk Hzhe Tjh Technical data: Aluminum sliding carriage length 3200 mm Carriage lock in any position Cutting width on parallel guide 1250 mm Max blade diameter 450 mm Hole 30 Cutting height at 90° mm 157 Cutting height at 45° mm 111 Tilting blade unit 0-45° Saw shaft speed rpm 3000/3600/4200 Blade motor power 7,5 Hp Automatic saw unit lift Manual tilt with saw unit handwheel Scoring saw unit: Blade diameter mm 125 - Hole 30 - Scoring motor power Hp 1 - Horizontal and vertical scoring saw adjustment Parallelogram blade guard Eccentric clamping arm Saw blade tilt indicator Weight kg 820

Condition: as good as new (ex-display), Year of construction: 1976, machine/vehicle number: WMMC62726272, functionality: not functional, operating hours: 161,016 h, power: 1,000 kW (1,359.62 HP), input voltage: 5,000 V, input current: 6,494 A, input frequency: 4,949 Hz, type of input current: AC, cutting height (max.): 10 mm, cutting width (max.): 100 mm, saw blade diameter: 100 mm, tilt adjustment saw blade: 100 °, height adjustment type: mechanical, saw blade bore: 10 mm, actuation type: mechanical, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,000 rpm, total length: 5,000 mm, total width: 5,000 mm, total height: 1,000 mm, overall weight: 30 kg, table height: 100 mm, year of last overhaul: 2020, number of tool stations in tool turret 2: 8, Facing Drilling Ljdpsymtqbefx Ab Tjrh

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Lredpfsw Dfnhjx Ab Tsh Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Lrodsx Twcvjpfx Ab Tsh

Condition: new, functionality: fully functional, For sale: New JET Table Saw JTS-600XL Clearance – B-Stock machines with cosmetic defects at a special price! Entry-level machine with precision-ground cast iron table and sliding table for accurate cuts. Saw unit is tiltable! Precision-ground cast iron table – The solid table made of high-quality cast iron provides a flat working surface and enables precise cuts. Sliding table – Manufactured from anodized aluminum extrusion profile (1,600 mm). Robust parallel fence – Features an integrated fine adjustment mechanism and round-rod guide, making the parallel fence an indispensable aid. User-friendly operation – Large cast iron handwheels ensure effortless adjustments. Extension table for added flexibility – Measuring 460 × 600 mm with a telescopic crosscut fence extendable up to 2,200 mm, the extension table accommodates large workpieces. Technical Specifications: Motor: 230 V / 1.5 kW Blade speed: 4000 rpm Blade diameter / bore: 250 / 30 mm Saw blade tilt: 0° – 45° Max. cutting depth at 0°: 80 mm Max. cutting depth at 45°: 54 mm Max. cutting width at rip fence: 610 mm Table dimensions: 800 x 350 mm Table extension: 415 x 350 mm Right table extension: 800 x 270 mm Precision sliding table: 1600 x 255 mm Max. cutting length: 1600 mm Overall dimensions: 1650 x 2200 x 1100 mm Weight: 157 kg Lrsdpfx Asyk Abwsb Tsh Scope of Delivery: Sliding table 1600 x 255 mm Saw blade Ø 254 x 30 x 3 mm – 36 teeth (carbide tipped) Parallel fence Extension table 460 x 600 mm with telescopic crosscut fence 2200 mm Dust extraction port Ø 100 mm Shipping: Freight shipping: Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT For freight shipping, you will be contacted by the carrier by phone one business day prior to delivery. The delivery time will be coordinated, and you can inform the carrier of any special requirements (access/limitations). Delivery is made to curbside or driveway by tail lift. Pickup of your order is possible at our KUCHL and SÖDING locations. After your order is received, we will check the earliest possible pickup time and contact you. The machine can be inspected during our business hours at any time. Subject to prior sale! Related terms: circular saw, table saw, saws, panel saw

Condition: excellent (used), functionality: fully functional, Double miter saw OMS INVINCIBLE OK 330 Lrjdpfx Abeylm Nue Toh Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable at 45°/-45° Motor power: 2×3HP ~2.2kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: excellent (used), Longitudinal Cutting Saw MZ Project LC 5000 Cutting length: 5000 mm Lrodpfx Asxcx Sbob Tjh Cutting height: 100 mm Cutting speed: 0–60 m/min Saw blade size: 350–500 mm Saw blade bore diameter: 35 mm Saw blade rotational speed: 3000 rpm Main motor power: 11 kW Machine dimensions: 6900x1700x1840 mm Weight: approx. 3000 kg

Condition: excellent (used), Machine information to follow... Ljdpeymmgvofx Ab Tsrh

Condition: good (used), Model: Univer 330IP Double mitre saw / compound mitre saw Year of manufacture: 2001 Motor power: 4.5 kW Maximum cutting length: 3300 mm Minimum cutting length: 240 mm Saw blade diameter: 330 mm Dimensions (L × W × H): approx. 3750 × 940 × 1450 mm Weight: 350 kg Lodeymg D Uspfx Ab Terh Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend checking all relevant details. Financial information VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Condition: used, Year of construction: 2016, cutting height 133 mm Lrjdpfxjymcpms Ab Tjh tiltable sawblade 0-45° cutting width with rip fence 1250 mm motor 5,5 kw scorring unit cutting length 2500 mm machine avaiable from medio April

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, height adjustment type: mechanical, total length: 17,000 mm, total width: 2,500 mm, total height: 1,000 mm, saw drive: 31,000 W, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Lodowa T Dcepfx Ab Terh Max. 63 A 31 kW Please contact us if you are interested or have any questions.

Condition: used, Automatic Horizontal Bandsaw Year: 2011 Lrsdpfoydv Rrsx Ab Tsh Serial Number: 11042134 Model: LX – 460AE Blade Size: 4770MM x 41 MM x 1.3MM Hydraulic Cutting Capacity: 460MM x 430MM

Condition: good (used), cutting width 300 mm Lredpeyiu Sfofx Ab Teh Cutting height 85 mm Motor output 1,5 kW saw-blade dia. 300 mm connected load frequency 380 V

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit - Spindle diameter: 30 mm - Spindle locking - With sliding table Lrodpfx Aoyi Tpvob Toh - Cutting length on sliding table: 2800 mm - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm - Table dimensions with extension: 1230 mm - Table dimensions with extension: 2070 mm - Saw blade guard - Dimensions (L/W/H): 2940 x 3400 x 1420 mm - Weight: 1100 kg ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate changes, the price may change)

Condition: new, cutting width max 610 mm Cutting height max 200 mm Saw blade diameter 650 mm Motor output 11 kW Lrodjyi Hthopfx Ab Toh

Condition: excellent (used), functionality: fully functional, Pneumatic stapler. - The automatic nailer pneumatically presses fastening elements onto the bottom of the mouldings - The clamping pad automatically adjusts to the height of the workpiece - Fastening elements are supplied on coils of 10,000 to 20,000 pieces (depending on size) - 200 to 300 complete frames per hour (depending on size) Lrodpsx U Dpfefx Ab Toh - Nailer type NR (two boxes of 12 mm fasteners included) - Overall dimensions approximately 96 x 61 x 122 cm and weight approximately 95 kg.

Condition: new, functionality: fully functional, TECHNICAL DATA: Lrsdpjx S Egaefx Ab Tsh - Maximum horizontal cutting length: 2500 mm - Maximum vertical cutting length: 2200 mm - Maximum vertical cutting height: 1600 mm - Maximum horizontal cutting height: 1400 mm - Maximum cutting thickness: 60 mm - Motor power: 5 HP (3.7 kW) - Blade diameter: 250 mm - Blade speed: 5300 rpm

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Lredpfxsu Rqq He Ab Tsh Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: new, Year of construction: 2025, Maximum horizontal cutting length: 4200 mm Maximum vertical cutting height: 2200 mm Maximum horizontal cutting height: 2080 mm Lrsdpfjxga H Isx Ab Teh Maximum cutting thickness: 60 mm Motor power: 5 HP (3.7 kW) Blade diameter: 250 mm Blade speed: 5300 rpm Horizontal digital display Vertical digital display

Condition: used, functionality: fully functional, Panel saw sliding carriage 3000 mm scorer Ljdpfx Abew U T D Rs Tjrh tilting saw blade

Condition: ready for operation (used), Year of construction: 2019, Circular Metal Saw manufactured in 2019. This Other Struers Magnutom 5000 features a cutting capacity for round material up to Ø 151 mm and rectangular material of 151 × 403 mm. It has a continuous power of 11 kW and a maximum positioning speed of 70 mm/s. Consider the opportunity to buy this Other Struers Magnutom 5000 Circular Metal Saw. Contact us for further details. • Cutting capacity (Max) – Magnutom 400: • Round material: Ø 151 mm • Rectangular material: 151 × 403 mm • Flat material: 92 × 550 mm • Cutting motor: • Continuous power (S1): 11 kW • Intermittent power (S3): 16 kW • Cut-off wheels – Magnutom 400: • Wheel size (Diameter × Thickness × Bore): 432 × 3.0 × 32 mm • Rotational speed (rated load): 1000–1950 rpm • Cut-off wheels – Magnutom 500: • Wheel size (Diameter × Thickness × Bore): 508 × 3.5 × 32 mm • Rotational speed (rated load): 1000–1850 rpm • Positioning and feed: • Cut-off wheel positioning range: • Y-axis: 385 mm • Z-axis: 235 mm • Maximum sample height under cut-off wheel: No limitation • Maximum positioning speed: • Y-axis: 70 mm/s • Z-axis: 50 mm/s • Feed speed range: 0.1–10 mm/s • Cutting force: 0–1400 N • Cutting table (fixed, Magnutom 400/500): 827 × 781 mm • Cutting chamber: • Width: 1000 mm • Depth: 1206 mm • Height: 918 mm Additional equipment • Optional X-table: • Maximum size: 942 × 781 mm • Minimum size: 673 × 781 mm • X-axis travel: 269 mm • T-slots: 12 mm, bi-directional Lrjdpfx Abjyh Hpks Tjh

Year of construction: 2000, condition: ready for operation (used), An automatic panel dividing saw Scheer is available. Cutting height: 70mm, saw blade projection: 77mm, return speed: 50m/min, feed rate: 25m/min, machine dimensions X/Y/Z: approx. 6000mm/3400mm/1900mm. Documentation available. An on-site inspection is possible. Lodpfxsym Dfis Ab Tjrh