Vertical CNC drilling machine

BIESSE BREMA EKO 902

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Godpfegmn H Aex Aggebi

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Gbsdpfx Aswb Alljggsi Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Condition: excellent (used), Year of construction: 2017, operating hours: 11,920 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 66 kVA, torque: 118 Nm, controller manufacturer: HURCO, total height: 3,160 mm, total length: 2,200 mm, total width: 3,170 mm, table width: 1,270 mm, table length: 610 mm, table load: 1,360 kg, rotary table diameter: 600 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,034 h, spindle motor power: 36,500 W, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 75 mm, tool weight: 7,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are selling a lightly used HURCO VMX 42 SRTi. Main spindle operating hours: 2,034 h The machine has been in production since early 2018. It can be inspected at any time, as it is still in daily use. Approx. 95% of machining has been on aluminum Gedpfx Aoyi T Ulsggjbi Integrated oil mist extraction system Renishaw probe for calibration 5-axis simultaneous machining Extensive accessories included: Tools, holders, fixtures, a storage cabinet, workshop trolley, and chip cart with a total value of approx. €50,000 net. A detailed list is available. There is also the possibility for the buyer to manufacture and supply parts for the seller in the future. The corresponding machining programs are already available.

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Gbsdpfewv Nb Nex Aggsi Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 25167180701, functionality: fully functional, power: 4.5 kW (6.12 HP), workpiece height (max.): 60 mm, total height: 60 mm, total width: 1,000 mm, air demand: 2,000 m³/h, feed rate Y-axis: 50 m/min, feed rate Z-axis: 20 m/min, rotational speed (min.): 4,000 rpm, CNC machining center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical specifications: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio. Equipment/features: - Air tables in the working area - Roller support at infeed and outfeed - Panel measuring sensor - Ball screw and linear guides - Rack and pinion drive - Centralized lubrication system - Import of DXF files Milling unit: Gsdpfx Agexz Hgdjgsbi Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency-controlled): 3.3 kW Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 spindles for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Includes grooving saw blade, 2 diamond milling cutters, 1 WPL finish milling cutter Provision for CLAMEX and door processing package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit designed for door processing, for machine with tool changer, complete including special tool change position in changer, angle gear for holding a lock case milling cutter, macro for lock case milling Automatic, program-controlled central lubrication Camera for monitoring

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Gbodpfxowuz N Nj Aggji Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Gbedpfx Aswukyqoggji Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm Gbsdpfx Ajwgwl Doggji min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: new, Year of construction: 2021, functionality: fully functional, Edgebanding machine Hebrock K36 featuring PLC control, a maintenance-free and coated quick-heating glue pot, including pre-setup for rapid glue pot changeover. - 10" touchscreen interface - Maximum edge thickness: 3 mm - Minimum workpiece length: 200 mm - Minimum workpiece width: 80 mm - Feed speed: 10 m/min - Ready for operation in approx. 5 min - Maximum power consumption: 14 kW - Electrical requirements: 400V / 3-phase / 50 Hz - Machine dimensions (LxWxH): 5250 x 1230 x 1430 mm - Approximate weight: 1700 kg Additional Equipment/Options: • Whispercut pre-milling cutter, 60 mm workpiece height • Heatable infeed fence • Radius unit for corner rounding, R = 2 mm • Quick-change device for corner rounding motor • Multi-radius scraper (R2/R1) • Corner rounding for 60 mm workpiece height • Release agent spray unit • Cleaning agent spray unit Gbodpfxewyu E Us Aggji • Edge protection spray system • Nesting package • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Interior LED lighting • Equipment for short parts processing • Preparation for return system (barbaric) • Axis package: motorized adjustment of height, edging, and pre-milling units • Additional workpiece infeed and outfeed supports (each 450 mm)

Condition: used, Year of construction: 2004, Clamping area 630 x 500 mm X axis - 630 mm Y axis - 765 mm Z axis - 510 mm A axis - 0,001 deg. (+30/-120 deg.) Gbsdpfxoxdfiij Aggsi C axis - 0,001 deg. (360 deg.) Spindle speeds 35-12000 rpm Spindle taper ISO 40 Control: Mazatrol 640 M 5X Equipped with: Coolant through spindle (20 bar)