Used Ng 200 for sale (23,877)

Condition: new, Industrial belt sander Scantool 150 x 2000 with integrated double dust extraction system Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 hp Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Platen size: 530 mm Weight: 115 kg The Scantool industrial belt sander models with double dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built according to the strictest environmental and safety regulations. Dkodjflt Alepfx Ak Aew The belt sanders are standardly equipped with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The infinitely adjustable working height enables an ergonomically correct working position. Perfect design for fast, effective, and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: new, empty load weight: 780 kg, maximum load weight: 520 kg, overall weight: 1,300 kg, loading space length: 4,200 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a high loader for snacks or goods. Our* snack bar trailers* from the *SELLERH* range are manufactured with an insulated sandwich body. The sturdy steel frame is welded and hot-dip galvanized for high stability. A lockable personal lock in steel and *not in plastic* is installed in the door. The box body is made of 25 mm polyester sandwich in white. The *car trailer* has four crank supports for jacking up the *snack van*. In other words, an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales hatch on the right* with lifting aids lockable from the inside, electrical distribution, stable *crank supports*, *sandwich body* 25mm outside in white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*. Dksdpfxopfcuye Ak Ajw

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, loading space length: 4,200 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a high loader for snacks or goods. Dodpfen Apirsx Ak Askw Our* snack bar trailers* from the *SELLERH* range are manufactured with an insulated sandwich body. The sturdy steel frame is welded and hot-dip galvanized for high stability. A lockable personal lock in steel and *not in plastic* is installed in the door. The box body is made of 25 mm polyester sandwich in white. The *car trailer* has four crank supports for jacking up the *snack van*. In other words, an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales hatch on the right* with lifting aids lockable from the inside, electrical distribution, stable *crank supports*, *sandwich body* 25mm outside in white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Dksdpfxjmhhf So Ak Ajw

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Dkedpfx Akemhhl Ho Ajw Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized Dsdpfxjmhh Dtj Ak Aekw - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software Dkedju Icc Aepfx Ak Aow equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: used, Year of construction: 1969, Technical details: Dsdpfx Asu Icp Aek Aekw sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle Dodpfx Asu Icqajk Aekw - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: used, Technical details: diameter: 200 mm passage: 50 mm width: 65 mm weight of the machine approx.: 46 kg stationärer Spannstock SSH 200 Kraftspannfutter, hydraulisch Kraftspannung 53 kN Merkmale: Dsdou Nlmaspfx Ak Aokw Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm Grundflansch Ø 290x30mm Flanschaufnahme Ø 140x10mm 20 Satz div. Formbacken *

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, p Technical Specifications • Material: Welded Q355 steel plate • Plate thickness: 25 mm • Hole diameter: Ø 28 mm • Hole spacing: 100 mm diagonal grid pattern • Engraved grid lines with 100 mm spacing • Three-day gas nitriding process • Surface hardness of the nitrided layer: HV 450–630 • Laser-engraved precision scale • Reinforced underside with weld seams and ribs • Enhanced corrosion resistance, fatigue strength and resistance to cyclic loading • Protection against adhering welding spatter Table Legs • 8 height-adjustable table legs • Working height: 820–865 mm • Leg adjustment range: 620–665 mm • Load capacity per leg: approx. 1,500 kg Dedeymf H Ujpfx Ak Askw Accessories • Optional 40-piece accessory set including various stops, stop and clamping squares, clamps, prism clamping bolts and more Available Table Sizes (L × W × H) 1000 × 1000 × 200 mm 1200 × 1200 × 200 mm 1200 × 2400 × 200 mm 1500 × 1000 × 200 mm 1500 × 1500 × 200 mm 1500 × 3000 × 200 mm 2000 × 1000 × 200 mm 2000 × 1500 × 200 mm 2000 × 3000 × 200 mm 2000 × 4000 × 200 mm 3000 × 2000 × 200 mm Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabric...

Condition: used, mileage: 13,045 km, power: 180 kW (244.73 HP), first registration: 07/1996, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 7,600 kg, empty load weight: 10,400 kg, next inspection (TÜV): 06/2026, wheelbase: 3,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, fog lights, power assisted steering, Vehicle location: Bovenden, customer’s site. 1x comfort seat, rear window, electric mirrors, heated mirrors, 6 switches, ABS (anti-lock braking system), constant throttle, PTO (power take-off), centralized lubrication system, differential lock, fog lights, beacon, leaf spring suspension, lateral aluminum underrun protection, roof hatch, red environmental badge. Wheelbase: 3,800 mm. Superstructure: Schmidt de-icing unit ASP 6.0 with 3x 2,000 L tanks & separate Deutz engine. 9t front axle, rear axle crown wheel 300, 13t, differential lock on both front and rear axles, ABS, reinforced rear suspension stage I, brake lining wear indicator, engine brake with constant throttle, centralized lubrication system, flexible diagnostics system (FDS), PTO with MB 2c countershaft, front engine output with tandem pump. With Deutz separate engine: approx. 711 operating hours! Vehicle can also be sold as chassis only! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Dkodpfjyk H Rvox Ak Ajw

Condition: like new (used), Packaging line for shrink bags The line consists of: Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxWxH): 1060x440x200 mm Dksdpfx Akey Iv Iaj Aew Machine dimensions (LxWxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7.0 kW; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel housing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption: 50 l/min at 6 bar Automatic water supply control Water drainage Automatic water level control Integrated scale protection Timer for preheating water

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests Dkodpfjy Hkd Hex Ak Ajw and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal Dkodjy Au Eyepfx Ak Asw -Individual components: including documentation, see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 Dedjx Af S Uepfx Ak Ajkw MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg Dkedpjvvvrpsfx Ak Aew dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Condition: used, mileage: 324,060 km, power: 294 kW (399.73 HP), first registration: 10/2013, fuel type: diesel, empty load weight: 13,465 kg, maximum load weight: 12,535 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,600 mm, next inspection (TÜV): 10/2026, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 4,600 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, steel body, integrated cab, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), raised exhaust, AS-Tronic automatic transmission, differential lock, fog lights, high beam, work lights, beacon, storage box, leaf/air suspension, last axle liftable and steerable, trailer coupling air-light-hydraulic, winter service equipment, lashing eyes, underride guard, swinging tailgates, roof hatch, crane behind cab, emergency stop, grab control, foldable, 2-point mechanical outrigger, radio remote control, 3x hydraulic extensions, green environmental badge. Dodpfxext Uu Ts Ak Aekw Wheelbase: 3600 mm. Body: Meiller 3-way tipper body with attachable aluminium side wall extensions (500mm) & Palfinger PK 12001-EH B crane with radio remote control. Crane operating hours: 4189h. Gearbox: ZF 12AS-2330 OD with MAN TIPMATIC, front mounting plate size 5! Load diagram: 3.9m-2650kg, 5.8m-1740kg, 7.7m-1280kg, 9.7m-1000kg! Loading height approx. 1540 mm! Fuel tank renewed. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dkjdexxb Rrspfx Ak Aow Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, mileage: 1,001 km, first registration: 01/2016, color: red, driver cabin: other, gearing type: other, Year of construction: 2016, load capacity: 2,000 kg, Equipment: crane, Vehicle location: Bovenden, Includes swivel head and upper suspension! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Dkodpsw A Sp Ajfx Ak Ajw - .

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine sustained transport damage. The machine is currently disassembled. Components can be inspected. The machine will be completely mechanically and electrically overhauled/repaired before delivery in 2026/2027. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Stroke rate: 30 - 180/min Center height: 410 mm Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table top; T-slot design can be freely selected) Dkedpfx Akew H Arve Asw Ram size: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, PC 477E, year of manufacture 2020.

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t Dodpfx Aow N S E Aok Ajkw dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, mileage: 439,000 km, power: 213 kW (289.60 HP), first registration: 03/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, loading space length: 7,670 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, Year of construction: 2013, Equipment: ABS, air conditioning, tail-lift, Manufacturer Volvo Model FL290 4x2 ThermoKing T1200-R Euro 5 Year 2013 Condition Very good Dedpfx Akjxpl Szs Aokw Serial Number YV2TH60A5DB648273 Ref. nr. 828006 Reg. date: 22-03-2013 Last seen: 20-06-2025 Hk: 290 Km: 439000 Gearbox: Automatic Eurotype: 5 Diesel tank: 1 Tank liter: 300 Rear view camera: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/60R22.5 Cover% left 30 - 80% Front suspension: Springs Suspension rear: Air Wheelbase: 5600 mm. Total weight: 18000 kg. Net weight: 10380 kg. Load capacity 7620 kg. Inside length: 7670 mm. Internal width: 2490 mm. Interior height: 2300 mm. Lift Brand: Palfinger Lift capacity: 2000 kg. Remote control: ? Refrigerator brand: Thermo King T1200-R Refrigerator year: 2013 Engine hours 0 Electrical hours: 0 Double compartment: ?

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Vibrating Screen Technical Specifications Model: CVS-2060 Number of Layers: 2 / 3 / 4 Dksdpfx Akjxpyino Asw Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: ready for operation (used), Siemens 6FC5210-0DA00-1AA1 MMC 100.2 SN: ST-MD2007975, professionally fully overhauled and tested with 24 months warranty, 100% functional, scope of delivery as shown in the photos. Agreed sales discounts do not apply to this item. Please inquire for price separately! Dkedpfex Eurljx Ak Aow