Used Beveller for sale (681)

Condition: used, mileage: 202,092 km, power: 290 kW (394.29 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, color: orange, emission class: euro6, total length: 7,700 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, soot filter, MB 2640 Multilift Roll-off Truck 6x4 Suspension: Leaf-air Wheelbase: 3.60 m Payload: 14,565 kg HIAB Hooklift Type: XR21S46 - W - IT2B- Year: 2016 4.80 m to the center of the rollers Special Equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Step with handrail on the roof, Exhaust to the lower right, Brake connection standard and DuoMatic, Air horn, Suspension: Front springs 8.0 t, 3 leaves, Transmission: 12-speed - Type: G 230-12, Rear lights, construction site version, Info display 10.4 cm with additional display, Interior filter for construction vehicles, Fuel tank: 290 L steel, left, Air intake from the front, Parameterizable special module, Rotating beacon left/right, Reversing warning audible (warning signal outside), Rear cross member reinforced, Protective plate under main tank, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Sunshade for side window, driver's door, Additional stabilizer, Rear axle / trailing axle, Storage flap outside left, 24V socket in the passenger footwell, additional, Stone chip protection grille Additional Equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Cab: Width 2.30 m, Cab: Cab entry movable, Cab: Tilting device hydraulic, Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with engine tunnel 170 mm, Suspension: Leaf / air, Window lifters electric, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Lift roof manual (steel), Rear axle bevel gear 233, Interior filter: Pollen filter, Steering power pump unregulated, Air compressor 2-cylinder, Knodpfxjzf Sg Ds Ahasc Air dryer heated, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 131-2c, Frame lowering without air spring residual pressure control, Ramp mirrors, Waste heat recovery, Rear window, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger multi-adjustable seat, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Rear underrun protection fixed, Front axle straight, Water pump regulated, Permissible total weight 26.0 t, Oil cooler transmission We will also be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Subject to change and prior sale.

Condition: used, mileage: 588,954 km, power: 330 kW (448.67 HP), first registration: 01/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Axle load – measuring device, Airbag driver side, Trailer socket 15-pin 7+7-pin, Work light, Work light rear wall of cab top, Exterior mirror right with maneuvering position, Air horn, Electrical pre-wiring in cab 24V / 100 A, Driver assistance system: Roll control assistant, Vehicle without torque increase 12th gear, Generator 150 A, regulated, Transmission 12-speed - Type: G 211-12, Automatic climate control, Comfort bunk top, wide, Fenders 3-piece, Fuel tank: Combination tank aluminum - 660 liters diesel + 75 liters urea solution (AdBlue), Fuel tank: Additional tank 330 liters aluminum, right, Cooler box / refrigerator, Air deflection system roof (lockable) and side, Mercedes star, illuminated, Engine brake reinforced, On-board unit for toll collection, Tire pressure monitoring system, Retarder, Reversing warning device acoustic and hazard warning lights (warning signal outside), Fifth wheel coupling: low maintenance, lock lubricated, Interface fleet management system, Drawers under dashboard, Circuit breaker, Seat cover / upholstery: Co-driver seat velour, Seat cover / upholstery: Driver seat velour, Seats in cab: Armrests on both sides co-driver seat, Seats in cab: Co-driver seat comfort suspension seat, Seats in cab: Co-driver seat backrest foldable, Seats in cab: Driver seat comfort suspension seat, Sun visor side windows, driver and co-driver door, Steel rims 11.75x22.5 (on front axle), Steel rims 9.75x22.5, Auxiliary heater electric, Storage flap outside left, Socket 12V / 15 A in co-driver footwell additional, Socket 12V additional, Socket 24V / 25 A in co-driver footwell, Socket 24V in storage compartment right, Socket cab 24V, Preparation / switch lift axle on semi-trailer / trailer, Curtain sleeper cabin, Additional thermal insulation Additional equipment: Knodpezf Tcmjfx Ahaoc Emission standard EURO 6, Storage compartment above windshield with lid, Axle configuration: 4x2, Axle load front axle 8.0 t, Actros 5, Actros cab L, Approach / front mirror heated, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Step on cab left, Exhaust to the right outside, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Battery 220 Ah, Differential lock rear axle, Compressed air connection in cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic switch-on for headlights (light sensor), Driver assistance system: Attention-Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assistant (Active Brake-Assist 5), Driver assistance system: Lane keeping assistant, Cab: Cab entrance fixed, Cab: Interior package chrome, Cab: Tilting device hydraulic, Cab: L BigSpace, 2.50 m, Floor level, Cab: steel-sprung, Comfort, Vehicle outline lights LED, Suspension: Air / Air (full air), Window lifter electric, Windshield tinted, Vehicle without rear window, Speed limiter system, Rear axle with active lubrication, unregulated, Rear axle bevel gear 440, Integral rear, Body / Structure: Semi-trailer tractor, Comfort bunk bottom, Comfort locking system, Steering power pump electronically controlled, Steering wheel with multifunction, Air intake behind cab, Air compressor 2-stage, Air dryer heated, Engine 12.8 L - 330 kW R6 diesel (OM 471), Engine variant OM 471, Type of use: Local transport, Wheelbase not defined, Wheelbase variant 3700 mm, Curb mirror, Waste heat recovery, Disc brakes front and rear axle.

Condition: used, mileage: 274,945 km, power: 315 kW (428.28 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 7,329 kg, maximum load weight: 10,671 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, next inspection (TÜV): 11/2026, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Sleeper cab, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, work lights, rotating beacon, leaf-air suspension, aluminum fuel tank, sunroof, green environmental badge. Ksdpfjzgu R Iox Ahasnc Wheelbase: 3700 mm, Body: Sold only together with the LEISTIKOW sludge suction semi-trailer S12AH with 2 chambers, approx. 26700 l, 7.5 t front axle, rear axle bevel gear 440 hypoid 13 t, electronic braking system with ABS and ASR, disc brake with partial protection on front and rear axles, condensate monitoring for compressed air system, front axle stabilizer, aluminum front underrun protection, smoker's package, waste heat recovery, PSM, communication interface (KOM), reversing warning, ClassicSpace, comfort locking system, Mercedes PowerShift 3, Power driving program, pre-wiring for toll collection, LED daytime running lights, ESP, lane keeping assist, attention assist, Active Brake Assist, transmission oil cooler, High Performance Engine Brake, auxiliary drive MB123-10c MPA N-/M-speed. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 200,000 km, power: 375 kW (509.86 HP), first registration: 05/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,370 mm, loading space height: 850 mm, Year of construction: 2020, Equipment: ABS, air conditioning, navigation system, * Mercedes Arocs 2851 MP5, two-sided tipper with Bordmatic and hydraulic flap * First registration: 2020 * 200,000 km * Euro6D * 6 x 4 * Leaf spring - air suspension Kjdpfx Aszhzniehaonc * Automatic climate control * Retarder * Trailer coupling * Camera * Plank Thaur body * 4.90 x 2.37 x 0.85 m * Unladen weight: 13,910 kg * Gross vehicle weight: 28,000 kg * 12,015 kg payload at 26,000 kg * Wheelbase: 3.35 m ---- Special equipment: Storage compartment above the windshield with a lid, front axle load 9.0 t, step with handrail on the roof, two-part exhaust system, batteries arranged one above the other, bi-xenon headlights, CB radio, interactive cockpit multimedia system, air horns (2) on the cab roof, cab: steel-sprung, comfort, suspension: front springs 9.0 t, 4 leaves, remote online function, additional parking brake on the front axle, speed limiter, 12-speed transmission - type: G 330-12, rear axle bevel gear 300, interior filter for construction vehicles, fuel tank: 290 liters, aluminum, left, cool box/refrigerator, air intake from the front, illuminated Mercedes star, reinforced engine brake, navigation system, programmable special module, wheelbase variant 3300 mm, frame overhang 900 mm, smoker's package, retarder, acoustic reversing warning (external warning signal), rear window, headlight cleaning system, additional key with remote control (2), circuit breaker, seat cover/upholstery: passenger seat, velours, seat cover/upholstery: driver's seat, velours, seats in the cab: armrests on both sides of the passenger seat, seats in the cab: driver's seat, comfort sprung seat, external sun visor, steel rims 11.75x22.5 (on the front axle), additional 24V socket in the passenger footwell, door extension for the cab, preparation for work lights on the rear cab wall, preparation for 4 surround cameras (display in the on-board monitor), preparation for a rotating beacon, additional thermal insulation, oil cooler for the transmission Additional equipment: Emission standard EURO 6, axle configuration: 6x4, heated exterior/front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, Arocs 5, exhaust to the right side, battery 170 Ah, compressed air connection in the cab, compressed air tank, steel, compressed air unit with condensate monitoring, compressed air unit, medium, automatic switching for headlights (light sensor), cab: cab entrance, movable, cab: hydraulic tilting device, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, electric windows, tinted windshield, generator 100 A, urea tank (AdBlue): 60 liters, manually operated sunroof (steel), body/superstructure: chassis for tipper, comfort locking system, steering assistance pump, unregulated, steering wheel with multi-function, steering oil cooling, air compressor 2-cylinder, heated air dryer, engine 12.8 liters - 375 kW R6 diesel (OM 471), engine variant OM 471, auxiliary drive MB 131-2c, type of use: local transport, wheelbase not defined, frame lowering without air spring residual pressure regulation, ramp mirrors, waste heat utilization, disc brakes with full protection, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger functional seat, front axle stabilizer, steel rims 9.00x22.5, 12V socket in the passenger footwell, front bumper corners in steel design, tachograph / EG control device, Truck Data Center 7 (fleet management system), fixed rear underrun protection, preparation for toll collection, preparat

Condition: used, mileage: 102,619 km, power: 330 kW (448.67 HP), first registration: 06/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, had accident, navigation system, parking heater, soot filter, Mercedes-Benz Arocs 5 2645 6X4 with tilting hydraulics – Damaged!! Engine runs!! * German vehicle * Euro 6 * Leaf / Air suspension * Automatic transmission * Cruise control * Air conditioning * Refrigerator * 1 folding bed * Multifunction steering wheel * On-board computer * Virtual cockpit * LED lights front and rear * Air horns on the roof Kodpfx Ajzh Dhfjhajnc * 1 x LED work light at the rear * Central locking with remote control * Keyless Go * Enhanced engine brake * 1-circuit tilting hydraulics * Hydraulic tank behind the cab * Luxury driver's seat Special equipment: Axle load - measuring device, audio system: Digital radio DAB / DAB+, step with handrail on the roof, equipment package: Comfort, equipment package: Safety, CB radio, cockpit multimedia interactive, air horns (2) on the cab roof, remote query function Remote Online, speed limiter, transmission 12-speed - type: G 230-12, rear lights LED, rear axle bevel gear 233, fuel tank: 290 L Aluminum, left, cool box / refrigerator, air compressor 2-cylinder, mounting plate / saddle plate 40 mm for fifth wheel coupling, mounting plate / saddle plate 40 mm for fifth wheel coupling 36 t, enhanced engine brake, enhanced engine mounting, navigation system, auxiliary drive MB 131-2c, parameterizable special module, frame lowering without bellow residual pressure regulation, frame overhang 750 mm, reversing warning acoustic (warning signal outside), rear window, fifth wheel coupling, low maintenance, headlight cleaning system (SRA), lower bunk, interface fleet management system, seat cover / upholstery: passenger seat velours, seats in the cab: driver's seat backrest foldable, sun visor outside, steel rims 11.75x22.5 (on front axle), socket 12V / 15 A in the passenger footwell additionally, socket 24V in the passenger footwell additionally, preparation / switch for lift axle on the trailer / semitrailer, preparation work light rear panel cab top, preparation for 4 surround cameras (display in the on-board monitor), preparation for rotating beacon, preparation for auxiliary headlights, warning device seat belts, auxiliary heater (water) Further equipment: Emission standard EURO 6, axle configuration: 6x4, front axle load 7.5 t, approach / front mirrors heated, trailer electrical and brake connection high, trailer socket 24V / 15-pole, Arocs 5, step to cab left, battery 170 Ah, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic switch-on for driving lights (light sensor), cab: tilting mechanism hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, suspension: front springs 7.5 t, 2 leaves, electric windows, windshield tinted, generator 100 A, urea tank (AdBlue): 60 L, lifting roof manually (steel), body / structure: semi-trailer tractor, comfort central locking system, mudguards 3-part, steering assistance pump unregulated, steering oil cooler, air intake behind the cab, air dryer heated, engine 12.8 L - 330 kW R6 diesel (OM 471), engine variant OM 471, type of use: local transport, wheelbase not defined, wheelbase variant 3300 mm, ramp mirrors, waste heat recovery, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger functional seat, steel rims 9.00x22.5, socket 12V in the passenger footwell, bumper corners front in steel design, tachograph / EC control unit, daytime running lights automatic.

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Kjdpfszrpnlox Ahajnc For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, mileage: 310,640 km, power: 170 kW (231.14 HP), first registration: 10/2001, fuel type: diesel, empty load weight: 7,130 kg, maximum load weight: 4,860 kg, overall weight: 11,990 kg, tire size: 265/70R19.5, axle configuration: 4x2, wheelbase: 3,260 mm, next inspection (TÜV): 11/2026, brakes: engine braking, color: beige, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, Kz. Haus Equipment: 1 comfort seat, double bench seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, auxiliary heater, switch 6, ABS (anti-lock braking system), constant throttle, auxiliary drive, frame cladding, differential lock, fog lights, work lights, rotating beacon, storage compartment, leaf spring suspension, trailer hitch ball head, trailer hitch with air and light connection, low-noise G1, underbody protection, roof hatch, green environmental badge. Kedpfx Ahozmgmhsaonc Wheelbase: 3260 mm Body: Palfinger roll-off system for containers up to 4.5 m, 5.3 t front axle, H4 10.8 t rear axle, bevel gear 410, ABS, disc brake on front axle, drum brake on rear axle, differential lock on rear axle, stabilizer on rear axle for extreme high load, hot air auxiliary heater, construction site filter, engine brake with constant throttle, Meiller 5-piston pump type 255/1, auxiliary drive MB 60-2C MPA low mounting, N-speed. Roller height approx. 1170 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), electric motor, three-phase motor -Manufacturer: Albany, electric motor -Item No.: Power: 0.55 kW -Speed: 1395 rpm -Shaft: Ø 14 x 27 mm with bevel gear -Design: B14 -Dimensions: 247/158/H190 mm -Weight: 10.6 kg/pc. Knsdpfx Aozmfu Dehasc

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right Kedpfx Ahjzp Nz Teajnc ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: new, functionality: fully functional, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, total length: 13,000 mm, total width: 3,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, GS13030CS MAX Ultra-Large Format Single-Platform Sheet Cutting Machine Knjdpov Hnpzefx Ahaoc Smooth and delicate cutting section, burr-free Equipped with bevel cutting head and system High-quality modular drag chain cables Beam safety light curtain Fully automatic grease injection system

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1 Knsdpfx Aswhk E Hohaoc

Condition: excellent (used), Geared motor, electric motor, electric geared motor, bevel geared motor Knjdpfxowr Ekfo Ahajc -Speed: 5.3 rpm -Power: 3.0 kW -Design: B3 -Protection class: IP55 -Shaft: Ø 65 x 130 mm -Gearbox: Nord Getriebebau Type SK.63 IEC 100 -Electric motor: DIETZ type FDR100LB/4 -Dimensions: 890/330/H490 mm -Weight: 166 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 10 h, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Section Steel Laser Cutting Machine Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Sheet, tube, and section steel cutting in one Kedpfx Ahsw I Ilijasnc One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Save working time with recallable tools; once set up, the drive unit can be brought back to the preset position with a single movement Mobile and flexible in use; beveling, grooving, flush milling Addition to table and CNC milling machines Table size 520 x 430 mm with fine adjustment #10450 Availability: short-term Storage location: Flörsheim Kedpfxsw I Upzj Ahajnc

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Knodpfsyzxa Ejx Ahasc Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control Ksdpfoy Nd Hyox Ahaonc • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: new, Year of construction: 2026, functionality: fully functional, A machine for beveling wooden posts and poles. Kedpey Tx U Tsfx Ahaenc Processes diameters ranging from 80 to 200 mm. Cutter head motor power: 2.4 kW. Number of knives: 2.

Condition: excellent (used), Year of construction: 2014, total width: 12,000 mm, total length: 10,000 mm, total height: 6,000 mm, overall weight: 92,000 kg, Length:10000mm Knjdpfx Ajzcva Dshasc Width:12000mm Height:6000mm Weight:92000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), number 3 Stück weight 3,05 kg/Stück range L-W-H 250 x 66 x 40 mm Beveled fork clamping block, DIN 6315 B, slot width × total length: 26 × 250 mm >> Technical Description >> Knsdpszd E Urefx Ahasc --> Slot width: 26 mm --> Total length: 250 mm --> For clamping screws: M24 --> Height: 40 mm --> Width: 66 mm --> Type: 6315 B --> Product type: Clamping bar

Condition: ready for operation (used), Year of construction: 2021, laser power: 3,000 W, number of axes: 3, Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details. • Positioning accuracy: ±0.03 mm/m • Repositioning accuracy: ±0.03 mm • Maximum no-load speed: 110 m/min • Chuck rotation speed: 100 rpm • Maximum acceleration: 1.0 G • Material processing capacity: • Round tubes: Ø20–210 mm Kjdjzdiw Hopfx Ahaenc • Square tubes: 20 × 20 mm to 150 × 150 mm • Maximum weight of a single tube: 100 kg • Bevel cutting: No • Chuck type: Standard pneumatic chuck

Condition: used, diameter . mm Number of knives . tool adaptor . The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Knsdpfxjyqvihe Ahajc About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, mileage: 288,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,470 mm, total height: 2,210 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are delighted that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a verifiable service history at our company! MB ACTRO 2540 COMPLETE TRUCK with certified BÖSE swing-wall bodies Rear cargo securing system 2 x LBW BÄR 2,500 KG Tag axle Kedpfx Aoy Tgmkohaonc RETARDER 2 x L 7,715 x W 2,470 x H 2,210 mm internal dimensions Special equipment: Front axle load 8.0 t, Airbag driver side, Work lights, Audio system: CD radio comfort (Bluetooth), Exhaust to the bottom right, Brake connection standard and DuoMatic, Compressed air connection in the cab, High compressed air unit, Compressed air horn, Electrical system and lights for interchangeable bridge frames, Cab: with air suspension, Windshield tinted, Vehicle without trailer coupling, Info display 12.7 cm with video function, Fender 3-part, Fuel tank: 290 L aluminum, Cool box / refrigerator, Aluminum rims 9.00x22.5 (ALCOA matte), Air deflector on roof (lockable), Air compressor 2-cylinder, Engine brake reinforced, Tag axle steered, Tire pressure control system, Retarder, Reverse warning audible (warning signal outside), Switch for loading platform, Rear cross member reinforced, Interface for fleet management system, Circuit breaker, Seats in the cab: Armrest for passenger seat, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Sun blind side window, Driver's door, 12V socket in the passenger footwell, 12V socket additional, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, Daytime running lights automatic, Preparation for reversing camera Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Actros 4, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pole, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air tank steel, Driver assistance system: Attention-Assist (fatigue detection sensor), Driver assistance system: Brake assistant (Active Brake-Assist), Driver assistance system: Lane keeping assistant, Cab: Width 2.30 m, Cab: L StreamSpace, Cab floor with engine tunnel 320 mm, Suspension: Air / Air (full air), Power windows, Generator 100 A, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle bevel gear 440, Body / Structure: Chassis, Lower comfort bunk, Comfort locking system, Communication interface, Radiator grille, Steering pump regulated, Engine 10.7 L - 290 kW R6 diesel (OM 470), Engine compartment encapsulation, Tag axle single-tired, Ramp mirrors, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: fabric, Seats in the cab: Passenger function seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Stabilizer additional, Rear axle / Tag axle, Stowage flap outside left, Socket cab 24V, Tachograph / EC control unit, Door extension for cab, Underride protection front, Preparation CB radio, Preparation toll collection, Front axle cambered, Water pump regulated, Permissible total weight 25.00 t, Auxiliary heater (water) GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If you wish, we will be happy to provide you with a LEASING or FINANCE plan.

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Knsdey Sk T Ejpfx Ahaec Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit Ksdoy Av A Hopfx Ahasnc - Buffing unit

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm Knedpjyy Rn Sefx Ahasc * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.