Used meat processing machines for sale (1,431)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Offered is a bacon slicer by Treif, model: FLEXON. Year of manufacture: 2015. 380 V. Completely stainless steel (V2A). The machine is fully functional and ready for immediate use. Chute size approx. 55x10x10 cm. 2 pairs of slicing grids, see photo. Further information upon request. Payment in cash or advance payment. Iedpfx Abjy Dvhfogjar Sale only to commercial buyers. No guarantee, no warranty.

Condition: excellent (used), functionality: fully functional, total length: 700 mm, total width: 700 mm, total height: 970 mm, Offered is a chopping block from the company Schwarz, measuring 70 x 70 cm and approx. 97 cm high. The wooden chopping block is in very good condition. Further information upon request! Payment in cash or advance payment! Sale only to commercial customers, no warranty or guarantee. Iaodpfjy Dvd Tex Abger

Condition: good (used), Year of construction: 1992, functionality: fully functional, Offered is a Kolbe SW D-114/2 meat grinder, V2A stainless steel. Iodpfxey Dvdaj Abgoar 2 speeds, 400V, 6.5/9 kW, 16A. The machine is in good condition and ready for immediate use. Further details on request. Payment in cash or in advance! Sale to businesses only. No guarantee or warranty.

Condition: good (used), functionality: fully functional, Offered is a bacon slicer by Treif, model: Piccolo, with 3 pairs of cutting frames. The machine is fully functional and ready for immediate use. See photos. Workshop tested. Further details on request. Ijdpfoy Dvbxex Abgjar Cash or prepayment. Sale to businesses only; no warranty, no guarantee.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Bone saw Berkel / Mado MKB 650 16A. 380V. Workshop-tested, defects corrected. Motor brake. Saw blade new. Year of manufacture: 2002 Inspection and test run possible by prior phone arrangement! Iasdpfjy Du T Tox Abgor Cash or advance payment! Sale only to commercial customers, no warranty, no guarantee.

Condition: excellent (used), functionality: fully functional, Offered is a K+G Wetter SM-65STL meat cutter. The machine is made entirely of stainless steel with an ejector and is ready for immediate use. Power supply: 380V, 63A, 24kW. Steplessly adjustable knife shaft: 50–5000 rpm. Mixing/reverse mode: 50–500 rpm. Two-speed bowl: 9/18 rpm. 6-knife head. Further details on request. Payment in cash or in advance! Sale to business customers only. No guarantee, no warranty. Iaedpfsy Du S Aex Abgjr

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offered here is an angle grinder meat mincer K & G Wetter MWW-130 with sorting unit, 2-speed. Motor power 19 kW, 50A, 400V. Hopper approx. 200L. See photos. Throughput approx. 3500 kg/h. 5-piece cutting set with separator. 2x E-Wolf knives. Workshop-tested and immediately ready for use. Iedsy Du R Sepfx Abgoar Further details available on request. Payment in cash or advance payment! Sale only to business customers, no guarantee, no warranty.

Condition: excellent (used), As new Vemag HP3 vacuum filler. Has been used for filling tiny chillies and pieces of pasta with cream cheese. Multi depositing system also available with it - as are the entire factory contents. Was last used in March 2026. Ijdpfx Ajyw U Dlebgsar

Condition: excellent (used), 130mm meat grinder in excellent condition. Iodsyw A Huspfx Abgoar

Condition: excellent (used), 50 hp model for between 3000-5000 kg per hour. In lovely condition. Photos show machine before it has been cleaned. Iaodjyw A Hnopfx Abgor

Condition: new, Metzger hobby | Butcher hobby Machine type: Band saw  Kolbe 32 Set-top model  Complete stainless steel body and working table  Adjustable blade tensioner  Caver safety switch  Cover safety saw  Length is adjustable thanks to the standard joinery  System cutting thickness property  Maintenance-free compact design  Dimensions: 60 x 50 x 110 cm  Electrical power: 1.1 kW  Cutting height: 32 cm Disassembled neutral work table with bottom shelf The professional disassembled neutral work table with bottom shelf is designed for restaurants, bakeries, pizzerias, and all food service establishments requiring a stable and hygienic food preparation surface. It provides a practical and functional solution for professional kitchens with limited space. Features: Professional design Stainless steel construction Disassembled structure Bottom shelf for additional storage Robust and stable build Easy maintenance Technical specifications: Dimensions: 1800x600x850mm Sind Mixer Type: S70 Complete stainless steel  Hopper capacity 70 liter  Single working shaft  Rotation of shaft in both directions  Protection cover  Capacity: 25 kg  Electric power: 2.2 kW  Voltage: 220 V / 50 Hz  Installation dimensions of machine in cm:  Width: 78  Lenght: 61  Iodpfx Absy Avglogear Height: 74  Manual sausage stuffer Capacity: 7 liters Quality and reliable sausage stuffer It is intended for use in both households and butchers It is light and convenient to use, it takes up very little space The body of the filler, sides, screws, and nuts are made of stainless steel Dimensions: 310 × 310 × 775mm Weight: 13kg

Condition: excellent (used), Year of construction: 2014, Marel TBL 3000 Target Batcher Iaedpfoy Au Iuex Abgsr Marel’s TargetBatcher has long been known for its accuracy and weighting for fixed-weight packaging. With 7 high accuracy static scales, with 14 buffer containers, TargetBatcher selects the best product combination in just a fraction of a second, making it much easier for processors to process multiple small product batches where a quick change from one product to another is crucial. TargetBatcher is present in plants around the world and is used for a variety of products e.g. mackerel, haddock fillets, tuna steaks, tiger prawns in shell, hake slices, squid, cuttlefish and other products. This compact, compact weight is available in two variants: fresh and frozen products and specially glazed products. TargetBatcher is an easy way to reduce raw material loss, mainly by combining the pre-determination of the number of frozen or fresh products that should be in a package of a certain weight. Optionally, you can use Marela software that tracks machine operation in real time. The information collected from TargetBatcher is a complete overview of the activities that are part of the weighing process. TargetBatcher is accurate and effectively reduces raw material losses. It is a stable device that you can rely on and doesn’t need too much maintenance and is also easy to use. Model: Marel TBL-3000 Year: 2014 Machine dimensions (LxWxH): 3.130x790x1.610 mm Machine weight: 330 kg. Power: 230/400V / 1kW / 50/60Hz Max. productdimensions (LxWxH): 280x170x120 mm Max. product weight: 3.000 g Capacity: 12-24 portion/min. Accurancy: 1g / 0,035 ounces

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1 x Reich GmbH stainless-steel fixed table bandsaw for cutting typically used for cutting meat. Supplied with several spare parts and new blades. Iaedpfoyzxd Rsx Abgsr Model - Profi 400. Serial number - 400 1141. Date of manufacture - 2005. Size of blade - 3204mm x 16mm. Electrical requirements - 400 V / 50 hz / 3 phase.

Condition: excellent (used), Year of construction: 2018, Marel 2730 salmon filleting machine with back and belly trim The Marel MS 2730 is an automated salmon filleting machine designed to maximize yield and throughput, capable of processing up to 25 fish per minute. It features automated size adjustments via a touch screen, includes advanced back and belly trimming, and is built for easy operation and hygiene. The machine accommodates salmon from 1.5 to 8 kg, with optional kits available for smaller fish, and is part of Marel's larger processing solutions. Key Features and Capabilities Automated Processing: The MS 2730 automatically adjusts to different fish sizes and uses electronically controlled tools to maintain high quality and consistent results. High Throughput: It can fillet up to 25 salmon per minute, increasing production efficiency. Improved Yield: The design includes a set of circular knives that capture meat near the center bone, significantly increasing fillet yield. User-Friendly Operation: A multilingual color touch screen provides easy and safe control over all operations, with pre-programmed settings for different fish sizes. Compact Design: The machine has a compact footprint, allowing for easier integration into existing processing lines. Technical Specifications Fish Size: Standard 1.5 to 8 kg, with a kit available for fish as small as 500 g. Water Consumption: Approximately 15 liters per minute. Power Requirements: Operates on 3 x 400V and requires a 3.3 kW power supply. Benefits for Processors Efficiency: Streamlines workflow with automated adjustments and high-speed processing. Quality & Yield: Produces high-quality fillets by including more meat and minimizing waste. Flexibility: Accommodates various fish sizes and is part of a larger, integrated system for comprehensive processing solutions. Cost-Effectiveness: Optimized water consumption reduces operating costs. The fish is fed into the machine belly down, which makes the infeed much easier and faster. An additional set of circular knives cuts the fish from vent to tail. This cut raises yield, as the meat close to the center bone is included in the fillets. For the belly bone cut, 4 sets of finger pressures secure maximum control of the fish and enable optimum cutting of both pre-rigor and post-rigor fillets. The result is high-quality fillets with higher yield and output. The MS 2730 automatically adjusts to various fish sizes, so there is no need to adjust once the program has been switched on. The MS2730 can process up to 25 fish per minute, depending on the length of the fish. With the built-in system for measuring the fish´s profile and size, the electronically controlled cutting tools can automatically adjust the filleting program to the fish´s size and shape. The result is higher throughput, quality and yield depending on trim specifications. With the optional small fish kit installed, the MS 2730 is capable of filleting fish weighing from 500 g up to 4 kg. Iodpfxjy Aul To Abgoar Manufacturer: Marel Model: MS 2730 Year: 2018 Capacity: 25 fish per minute Fish size: 1,5-8 kg. Power Supply: 400/230V / 50 Hz Power: 5,5 kW Water consumption: 15 liter/min. Machine dimensions (LxWxH):  3.150x1.035x1.980 mm Machine weight: 1.000 kg.

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Iedpfx Aoywpcijbgear

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Iodpfxsywpble Abgsar

Condition: used, all stainless steel loading height : ± 1.000 mm diameter of the screw : ± 350 mm Iaodoyxnf Sspfx Abgor outfeed height ± 1.600 mm length of the screw : ± 3.100 mm dimensions hopper: ± 900 x 800 mm dimensions: (l x w x h): ± 3.200 x 900 x 2.300 mm mobile

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system Iajdoyxnfljpfx Abger electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: used, loading : max. 2000 to 2200 kg (depending on the product) all stainless steel vacuum pump not included Lutetia control adjustable speed tilting system to discharge Iaedpfxsyxnd Us Abger 1 water filter dimensions (l x w x h) : ± 3.600 x 1.550 x 1.990 mm

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Iedjyzt Nzjpfx Abgsar Price is for the entire unit.

Condition: used, net length ± 18.300 mm net width ± 1.800 mm Iajdeyxc S Tjpfx Abgsr max. product height ± 85 mm 3 evaporators motor compressors not included (required capacity ± 224 kW) dimensions cell (not included) (l x w x h) : ± 18.300 x 3.580 x 3.447 mm evaporation temperature: - 42°C medium : ammonia/freon capacity 1.500-2.000 kg/h (depending on the product) machine is modular and can be shortened by ± 1/3.

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 2.200 x 1.000 x 2.100 mm weight 1200 kg PLC control with “bridge breaker” in good condition in good working order + Shuttle conveyor belt “GEA” Type SHC 1000/600 all stainless steel adjustable speed Iodpjyxc S Hefx Abgjar mobile infeed belt width 600 mm outfeed width 1.000 mm overall dimensions (l x w x h) : 2.700 x 800 x 1.100 mm

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm Iaodpfx Asyxc Syebger cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: used, belt width 400 mm all stainless steel Ijdpfx Absyxc Stogoar adjustable speed with lower and upper belt adjustable upper belt with outfeed belt with air knife dimensions (l x w x h) : ± 2.500 x 900 x 1.400 mm mobile 4,45 kW

Condition: reconditioned (used), Year of construction: 2020, The DMK 20 C table cutter is the ideal solution for small to medium-sized meat processing businesses, upscale gastronomy, as well as large kitchens and catering, due to its compact, robust, and precise design. Its well-engineered construction offers users virtually unlimited versatility in all application areas. The machine is equipped with two independently operated, powerful motors, providing a wide range of control options. With the optional robust, mobile base frame, the desired mobility is ensured. You will receive an invoice with VAT shown. Our used equipment service for you: • 6 months warranty on electrical components, limited to the replacement of defective parts, excluding removal and installation costs Iaedpjyx A Riofx Abgjr • High-quality branded equipment at fair prices • Professional overhaul, inspection, and expert cleaning • Tested and fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Safety inspection in accordance with DGUV V3 Professional engineering in a compact space: The DMK 20 C2 table cutter is distinguished by its exceptionally smooth and low-vibration operation, even at high speeds. The elaborate manufacturing of each component is carefully and precisely matched. The thick-walled cutter bowl, cast from high-quality stainless steel, provides extremely accurate concentricity, enabling tight adjustment of the cutting blades within the bowl radius. Small cutter, big performance: The powerful motors deliver the highest torque, even with challenging materials. Vibration-damping machine feet, the heavy, double-walled cutter lid, and the Plexiglas noise reduction cover all significantly reduce operational noise and emissions. The clearly arranged control panel with push buttons and the easily readable analog thermometer ensure efficient operation with a broad spectrum of applications. Machine features: • Completely stainless steel construction • Massive cast stainless steel bowl (Bowl capacity: 20L) • High-precision, maintenance-free cutting system • Stainless steel knife head with 6 blades • Tight cutting tolerances within the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter lid • Analog, clearly readable thermometer • 6 stainless steel knives, 7 stainless steel spacer rings, two bowls Drive & Controls: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox • Two speeds, independently switchable • Large, easy-to-use push buttons with easy-to-clean protective covers Technical specifications: • Bowl volume: 20L • Usable fine sausage emulsion capacity (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse: (A) 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base on castors • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Model: DMK 20 C2