You can also make direct contact in Polish.
Nmzyt
Powder Coating Plant MONKIEWICZ was produced in 2003. The painting house had a chain mentioned in 2010.
Components of the automatic painting line:
- MNA-3 OL spray washer, 3-zone washer
- automatic tunnel dryer AST-1K.OL
- automatic tunnel kiln APT-1S.OL
- central control cabinet
- chain tensioning station, 2 pcs.
Bpyum0ilag
Technical parameters of the powder paint shop:
- maximum painting size (length x width x height): 700 x 200 x 2170 mm
- chain speed adjustment: up to -2.5 m / min.
12 meters length
2 meters width
2 meters height
Powder plant is under power and can be visited with pleasure.
incl. steel construction
Bqan9ro7rv
Wagner digitech installation.
Installation is working but used condition.
Disassembled in working order.
The installation :
Mb3x8oo2
1x wagner ccm-d1
10x wagner epg-d1
10x wagner pea c4 powdergun
1x wagner cps powersupply
1x wagner digitech cabinet
9x wire powdergun 20m
Sold as is.
Disassembled in working order
Open for offers.
cube powder cabin with recovery, feeding and cleaning device.
latest generation cyclo-feed device
w/o guns
w/o reciprocators
Hhog8b7le
Powder coating booth KPA-20 3825 euro
Bez8f9t
powder coating hand unit AP-300V 1675 euro
As new condition
We offer you automatic spray cleaners. The cleaners are used to spray the workpieces with
non-aggressive chemical agents to the workpiece
degrease / clean. The detergent enables washing
with chemical agents from a container and rinsing with
Water with the help of spray nozzles.
- Cleaning in 5 stages.
- Cleaning and rinsing in a closed circuit
- automatic transition between the stages
- Container made of acid-proof steel, thermally insulated
- Warming up of the chemical agent container with...
Powder coating line consisting of:
- 7x degreasing tubs
I3fn8vj
- 1x dryer
- 1x stove, automatic robot with 4 x pistols and 2 x hand pistols
- 1x demi water device (reverse osmosis)
- 1x compressor
We also construct plants according to the customer's requirements and wishes !!
Oi07b
Our plants are manufactured by ourselves.
Made in Germany
Powder coating extraction system KM Industrieservice ASAP4-PRO
4 filter system with 12.000m³/h suction capacity.
System with ceiling / floor on rollers or fixed.
Splitter silencer for noise reduction.
Cleaning of the filter cartridges by compressed air blasts, Siemens SPS controlled.
Plant with CE
Working dimensions : L=3000mm H=2200mm
Delivery time : 6-...
Mono Cyclones
Powder paint recycling is provided by mono cyclones. The powder particles that are absorbed with air are swirled into the cycle body by a 180-degree centrifugal rotary motion.
The second swirling dust particles formed in the middle division are lowered to the cyclone bucket through the cyclone cone.
The small fractures resulting from the collision of the fast moving particles with each other are directed to the middle suction tube along with air and pass through the filter group...
Complete powder coating installation
Powder coater manufacturer: Wagner
Number of pistons: 8
Type of pistons: GA 2000 EPA
Control: Esta-Pulver
HVM 2070 + PM 301 + EPG 2007 + BCM 2007
H2lmyi2
Powder coating booth manufacturer + extraction: Eisenmann
Max product size: 225x50x .... cm
Total size: 800x200x430cm
part dimensions w=1000 h=2300 lg=2000
ss tunnel 6 stage
dry oven
cube powder booth
curing oven
morris conveyor
dismantling exluded
exworks
Nxnqtss
glass cabine for manual powder coating of metal parts.
9rj20quzv
Please contact us.
Heating energy source : Electric
Heating mode : Circulating air
Heat output : 30 kW
Air circulation motor : 1,5 kW up to 250°C
Connected load : 380-400 V
Insulation floor : 100mm
Outer dimension :
3400mm (L) x 1800mm (W) x 2550 (H) without fan motor on top and switch cabinet on the side
Working dimension (inside) :
3100mm (L) x 1200mm (W) x 1800m (H) Height through the low lying rails ≠ 2000mm
Equipment :
- Double wing door, incl. door latch and handle
- Adjustable air fins (optimal air circulat...
Second hand powder coating line - in good condition.
Maximum workpiece dimensions: 1,100 mm x 600 mm x 2,000 mm (HxWxL)
Ogeop
Part weight: Up to approx. 200 kg
We are selling an existing plant with the dimensions approx. 8 x 18 m.
The plant contains the following components:
- 1-chamber pretreatment plant (degreasing, 2x rinsing)
- Adhesion water dryer
- Powder coating oven
- Conveyor technology as manual sliding conveyor incl. steel construction
The powder booth is not included in the ...
Complete powder coating installation
Powder coater manufacturer: Wagner
Muo8u0
Number of pistons: 40
Control: Esta-Pulver
HVM 2070 + PM 401 + PPM 2161
Powder coating booth manufacturer + extraction: Eisenmann
Max product size: 288x50x .... cm
Total size: 600x200x430cm
PROTON YB-500 Multicolor Powder Coating Gun
Nominal input voltage : 110V240VAC
Frequency : 50-60Hz
Connected load (without vibrator) : 140 VA
Nominal output voltage (to the gun) : eff.10 V
Nominal output current (to the gun) : max. 1.2 A
Connection and output for vibrator (on Aux output) : 110/230 VAC max. 100 W
Connection for rinsing function (valve) : 24 VDC max. 3 W
Temperature range : 0°C - +40°(+32°F - +104°F)
Max. surface temperature : 120 °C (+248 °F)
Yse7iw
Approvals : II 3 D IP54 120 ...
usable working room: lxwxh 3600x1700x2200mm
max. 220°C
Bexgqkl
Oil-, gas- or electrical heating possible,
Ground track for hordes waggon or
manual or automatically conveyor tracks possible
Flap or sliding doors available.
ROMER manipulators are characterized by quiet operation.
Bmt7r28v0e
They can be widely used both with simple,
as well as complex multidimensional processes
They are programmed using a PLC controller
Danby92
Working with long and short strokes
The toothed belt transmission ensures quiet operation
Maintenance-free AC motor
Narrow column design for space saving.
The robust construction of the manipulators ensures great possibilities and high stability.
The manipulator is equipped with a 7 "touch pa...
Stainless Steel washing line with 4 level.
Drying and cooking oven separately.
Painting cabin and conveyors.
Working in a good condition.
Bn28qjjaij
Manual conveyor system,
These system can be combined with a chain, pulling the
traverses through the single parts of the process
as semi-automatic function.
Possibility of supervisor or fully mounted..
Please contact us for more information.
Hjm7fzx
Application equipment supplied by IDEAL LINE was placed into operation in 2011.
This line features a tunnel, six levels of pre-treatment using iron phosphate and independent de oxidation, ultrasonic washing and passivation levels. This technical solution enables chemical treatment of steel, zinc-coated and aluminium sheet products for interior and exterior use. The spray booth is used for electrostatic powder application and the system features a quick change system for paint shades up to 20 min...
DESCRIPTION
The demineralized water station is used to produce the so-called demi water using ion exchange technology.
Bmvaym2iai
The station consists of 3 columns
Strongly acid cation exchanger working in the sodium cycle,
Strongly basic anion exchanger working in the chloride cycle,
Carbon filter
Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads.
Rouezts
The columns are made of AISI316L steel
easy powder booth for color change , internal skin pvc , external support frame in steel , completed with cyclone , recovery , after filter
Biswvgytdx
Powder baking oven 2.000 x 1.900 x 2.000 mm
1 Inner dimension Length 2,000 mm
Nxxsb
2 Inner dimension width 1,900 mm
3 Inner dimension height 2.000 mm
4 Substructure 1 set of steel profiles
5 walls 1 set of 1mm galvanized sheets on both sides, outside RAL
6 insulation walls, ceiling 1 set rock wool 150mm 75Kg/m²
7 Floor furnace receives 2 entry rails for trolleys
8 Temperature 220°C
9 fans 1 pc. 5.700 m³/h
10 electric motors 1 pc. 2.2 kW, 1450 rpm, 3 F, 50 Hz
11 Thermal output 33 kW = 28,380 kca...
Booth KPZ-4P
• Booth Type Closed drive-thru
• Worksize dimensions 3500 width x 1800 height x 1000 depth
• Overall dimensions 3300width x 2300 height x 1800 depth
• Power supply Electric
• Nominal power 0,69kW x4
• Voltage 380V
• Frequency 50-60Hz
• Filters 100% Polyester
• Filters count 4
• Filters hang type Bagnet type, easy on/off
Pjmudoyal
• Filter area 30m2
• Filter cleaning system Pneumatic - Jet Venturi
• Ventilator type Aluminium ray rotor .
• Air consumption 20,400m3/h
• Loudness 74dBa
•...
Complete finishing line
max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm
max. weight 50kg (higher weight possible)
speed up tp max. 1m/min. (higher speed possible)
Please contact us for more information.
Npgygf9u8
Spray all powders with ease, coat complex geometries with outstanding efficiency and quality and do it all in the most challenging environments.
This paint gun set has a body designed with a stronger and stable structure.
Blkybd08fi
Handles any powder:
Today, you’re faced with the challenge of spraying a multitude of colors and chemistries. The Y-B-400 gives you the power and control needed to achieve the best looking finish with any powder.
Optimum ergonomics:
The light-weight, ergonomically...
7 "Touch Panel
The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it.
Memory of 20 programs with 10 events
It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve.
This is especially needed for more demanding processes.
Information on gas / oil consumption
The consumption is calculated based on the burner settings. This feature will allow you to ...
Our powder booths are specially developed for powder coating. Many years of experience and numerous customers confirm our quality.
"Numerous references"
❗ Payment security according to agreement ❗
✅ Offer - order confirmation - invoice ✅
"Also paint strippers available"
External dimensions of the stand: 3000 x 1700 x 2500
installed electrical energy: 2.2 KW
Voltage: 400V
Frequency: 50-60Hz
Filter: polyester
Number of filters: see table 3
Total filter surface: 45 m ^ 2
Filter cleaning system: p...
The creation of a written offer / cost proposal for a powder coating system of the company Romer.
Mojl7
Bumex stands for quality and economy.
Our machines impress with quality and efficiency thanks to sophisticated technology.
He8s03xh8
Our portfolio includes:
Curing ovens
paint stripping basin
Extraction systems
Workpiece washing systems
Custom-made products
Our attention to quality, economy and efficiency are your guarantee for efficient production.
In addition to the products we offer, we can also make any kind of custom-made products according to your needs.
We would be pleased to submit you a...
TWINLINE-CY AUTOMATIC
POWDER COATING SPRAYBOOTH
The powder booth is designed for automatic application of powder coating in an electrostatic field. The spraybooth constructed by power coated galvanized sheet iron.
Powder vacuum is provided from Jet Pulse Filters, mono cyclone or multi cyclone units.Automatic filters are cleaned with high pressure air (jetpluse) automatical or manuel.
Filter cleaning is controlled by electronic pcb and cleaning time adjustable from digital screen.
Filter si...
Transport systems
Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles.
- For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport).
- For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process.
- For companies that make different items at once and have e.g. several cabins with diffe...
- booth work opening w=1000 h=2200
- feed centre wagner with 2 ss hoppers
Msbgt
- 6 auto guns + 2 manuals
- 2 electronical reciprocators
- galvanized ductwork to connect cyclone , feed centre to a filter
- hight efficiency recovery cyclone with surge hopper and pinch valve
- after filter
- booth control panel
- totally refreshed , installed , with 12 mouths guarantee
Model KPO-3
Booth Type Open
Worksize dimensions 2800 width x 2200 height x 1000 depth
Overall dimensions 2800 width x 2300 height x 1700 depth
Weight 550kg
Power supply Electric
Nominal power 0,69kW x2
Voltage 380V
Frequency 50-60Hz
Filters Polyester
Filters count 3
Filters hang type Bagnet type, easy on/off
Filter area 22,5m2
Filter cleaning system Pneumatic - Jet Venturi
Ventilator type Aluminium ray rotor 2pcs.
Loudness 74dBa
Air consumption 10,200m3/h
Gtkqg8
Warranty 12 months
Encore® LT is a robust and everyday powder application system. Our robust and user-friendly pistols and controls are proven in use, very flexible in everyday use and are characterized by a high material transfer rate.
With patented Select Charge® technology - you simply choose from several preprogrammed coating types
With AFC control (Automatic Feedback Current) - automatically regulates the optimum electrostatic charging voltage based on the distance between the gun and the workpiece
Digital P...
BOOTHLINE FILTERED
POWDER COATING SPRAYBOOTH
Powder booth is designed for manual or automatic application of powder coating in an electrostatic field. The spraybooth constructed by power coated galvanized sheet iron.
Powder vacuum is provided from Jet Pulse Filters which are the backside of the spraybooth. There are 2 or more non-woven filters for long life filtration. Filters are cleaned with high pressure air (jetpluse) automatical or manuel.
Filter cleaning is controlled by electronic pc...
High hauling power
Soundproofed construction
Electronic control 4 "touch panel
Constant measurement of flow and filter clogging
Final filters
Inverter controlled fan
Bmt9e0xx2p
• Electrical data 22kW 380-400V 50-60Hz
• Theoretical capacity 12000 m3 / h
• 1/4 "pneumatic connection
• Number of filters 8 pcs.
• 160 m2 filtration area
• Automatic filter cleaning
• Air consumption max. 12L 6-8 bar / shot
• 50L waste container capacity
Description
• Dust collector equipped with an efficient radial i...
nordson powder cube booth , 2 manual touch-up , 2 reciprocators , 6 auto guns , color centre , ciclone , filter , ex works , loaded to a truck
Zwbe7jwj
