through-put width 600 mm
working heigth 650 mm
working area L-W-H 500 mm
compressed air 10 bar
weight of the machine ca. 150 kg.
dimensions of the machine ca. 800 x 700 x 1.800 mm
Bfvjkjw3nf
through-put width -- mm
N7m09
working heigth -- mm
total power requirement 5 kW
dimensions of the machine ca. 3,2 x 1,7 m
Required air-pressure 6 / max. 10 bar
GO 2017
Maximum length of the sheet metal: 3000 mm
Maximum width of the sheet metal: 1500 mm
Maximum profile size: 3000 mm
Maximum height of blasted parts: 120 mm
Eupmnzapa
Minimum table capacity: 4500 kg
Number of throwing wheels: 4 pcs
Throwing wheel power: 7.5 kW
Maximum spindle speed: 2900 1/min
Total power: 50 kW
Filter capacity: 5000 m³/h
Equipment:
Technical books
Spare parts for OSMG Shotblasting Plant
- braided link belt F 450/S-1.3401: L: approx. 14,30m; B: approx. 840mm; wire Ø 6,3mm; cross bar Ø 8,0mm; pitch 50mm; material 1.3401 /X120Mn12)
- Lid protection plate No. 136 = 4 pieces
- Side protection plate no. 137 = 4 pieces
- Blast medium inlet pipe / inlet pipe SG 350 = 1 piece
Mg0vjaln
- Various other cover protection plates and side protection plates (1 piece + 5 pieces)
i.D.
0 2060 x 1270 x 860 mm
operating pressure 2,5 - 8,0 bar
air consumption at 6 bar 350 l/min
weight of the machine ca. 0,23 t
dimensions 2,08 x 0,73 x 0,8 m
Duo blast cabinet
10 PET sheets to protect the windows
10 PET sheets to protect the fluorescent lighting
2 foot pedals
2 jet guns
6 ceramic nozzle inserts (6 mm diameter)
Cutmvuem
Sandblasting unit LORTZ TR 80
No. 1510/120
Year of manufacture 2015
Extraction, dust filter separately standing.
Outside dimensions: 800 x 900 x 1700 mm (width x depth x height).
Inner dimensions: 780 x 800 x 700 mm (width x depth x height)
Due to the possibility of using all blasting media, this sandblasting cabin is ideally suited for sandblasting, roughening, deburring, matting, cleaning, derusting, shot peening and much more of the most diverse workpieces.
Two closable push-through openings ...
dimensions: innen 1160 x 870 x 850 mm
Air consumption 400 - 800 l/min.
air pressure 3,4 - 8,0 bar
workpiece weight max. 150 kg
total power requirement 1,2 kW
Bqgudmt88o
weight 160 kg
range L-W-H 1320 x 1200 x 1760 mm
through-put width 2550 mm
working heigth 650 mm
Numbers of turbines 6 Stck.
Power 120 KW
weight 30 t
Gietart Sprint 2.6 blasting machine for blasting sheet metal, profiles and tubes. The continuous blast machine was built in 2007 and has worked in blasting mode for about 8157 hours.
The operating hours amount to 12275.
There are 6 C380 jet turbines with 11kW each used ..
Evod7bgge
The Gietart Sprint 2.6 continuous sandblasting machine is suitable for blasting sheet metal and profiles with a m...
Total hours: 2964 h
Hours on: 1485 h
Throwing wheel: 231 h
Maximum workpiece diameter: 250 mm
Maximum filling volume: 30 l
Throwing wheel power: 2.2 kW
Maximum spindle speed: 9000 1/min
Quantity: 12-15 pcs
Workpiece weight: 90 kg
Hzf8n9m3e
Machine dimensions:: 1500x1500x2000 mm
Weight: 900 kg
Equipment:
Filtration unit with separation
Universal holders
14 positions of planet gears
Components - impellers
grinding diameter 130 mm
grinding length 300 mm
centre height 65 mm
total power requirement 2 kW
weight of the machine ca. 0,6 t
Bl9jfuqhci
dimensions of the machine ca. TBH 1,10 x 1,40 x 1,40 m
Sandblasting cabin
Ehfgqif
unfortunately no manufacturer and technical data known
Cabin dimensions approx. 60 x 55 x 60 cm
dimensions: innen 1160 x 580 x 580 mm
Air consumption 400 - 800 l/min.
air pressure 3,4 - 8,0 bar
workpiece weight max. 120 kg
total power requirement 1,2 kW
Bqgucqaocl
weight 115 kg
range L-W-H 1225 x 935 x 1640 mm
0 410 x 310 x 380 mm
operating pressure 4 - 8 bar
air consumption at 6 bar min. 250 l/min
weight of the machine ca. 12,5 Kg
Blnrkseua3
490 x 370 x 380 mm
The Sapi blasting container with 20 feet, consisting of a sturdy box section frame with welded-in wall and ceiling plates made of steel beaded plates. Including crane eyes at the upper corners. Bottom steel plate smooth prepared for blasting medium transport. With front door, approx. 2.90 x 3.50 m, 2-leaf. Inactive leaf DIN left with viewing window and rubber protection as well as handle and lock Inactive leaf DIN right with supply air louvre and external rod lock.
Bj8oqv3i
through-put width:2000 mm
working heigth:500 mm
Numbers of turbines:6 Stck.
The Gutmann KH2160 shot blast machine is a continuous blast machine equipped with a roller conveyor transport system for 2000 mm wide workpieces. The workpieces to be blasted (sheets, profiles and other components) are conveyed through the blasting chamber of the blasting machine for cleaning and descaling.
This reliable Gutmann continuous blast machine, built in 1996, was completely overhauled by Agtos in 2006 and equ...
Blasting container for blasting glass beads and ceramic balls with drum magnetic separator and stainless steel grating floor. Inner dimensions L=5850 W= 2300. Side Door Open for easy loading with the forklift.
Bp733b8y7q
We offer drum blaster OMSG, type 1R-FAC Total power input - 7 kW Inlet chamber inner dimension - 700 x 700 mm Inlet chamber outer dimension -970 mm Rubber belt width - 920 mm Machine width - 1500 mm Machine length - 2700 mm Machine height - 3400 mm Equipment with complete documentation + electrical documentation The machine includes: filter unit with fan, bucket conveyor and recuperation unit. Machine in operation, possibility of testing.
Bp9fggq2yz
through-put width 565 mm
working heigth 250 mm
discs 330 x 165 mm
voltage 220 V
Bgrtdx7fiq
Receiver capacity 2 x 37 l
working pressure 4 - 8 bar
Air consumption 170 - 500 l/min.
weight of the machine ca. 36 Kg
1020 x 460 x 520 mm
Mobile beam unit (soda blasting)
Consisting of:
Nozzle set and moisture separator
Boiler 2 x 37 liters
Blasting gun with 2.5m supply hose
Gwlsiw
Soda blasting can also be used to clean engine parts, degrease parts, remove
graffiti, remove mold, and repair damage caused by fire.
Shott blasting machine dia 1200 mm, height 300 mm, load 500 kg, 1xturbine 7,5 kW, dedusting 3000 m3/h, 4 kW
Bjdkabdakt
work opening w=700 h=1800
aereal conveyor with supports
Mvax3o
Pressure blasting cabinet DSK 15.15.20.RB75 with or without roller conveyor. Blasting chamber W=1150 D=1150 H=930mm. 1 TÜV-tested pressure vessel 20l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron...
We offer suspended blasting equipment SIRSI METALLISATOR, type - SELBA 0-8 TR SM 260. Year of production 2009. The size of the through chamber is: width - 800 mm, height - 1500 - 1600 mm. Sweeping device with 8 sweeping turbines and frequency converters - (speed control). Each throwing wheel with a power input of 5.5 kW. The equipment includes a filtration unit with a capacity of 7000 m3 / hour. Number of suspension hooks - 28 pieces, travel speed - 2.9 m / min. Equipment with complete drawing d...
dia. of drum 820 mm
width 1000 mm
charge load 450 kg
total power requirement 17,5 kW
Bkplse2jqk
weight of the machine ca. t
dimensions of the machine ca. m
0 945 x 605 x 605 mm
operating pressure 2,2 - 5,5 bar
dimensions 1,0 x 0,61 x 1,65 m
1300 x 1000 x 750 cm
Air consumption 250 l/min.
Bh73woz0ne
weight of the machine ca. 0,09 t
Shott blasting machine-house with dimensions 4500x5500 mm, doors 5100 mm, crane hook 40 tons, 9x11kW Rutten turbines, dedusting filter 30.000 m3/h, 40 kW.
Cxd2afv0
The workpiece is hanged on rotating hook or put in the basket.
BMF - TORNADO - 2018- max size of workpiece, sphere diameter: 250 mm - max allowed size of workpiece with standard clamping: 3 kg/pc - max allowed size of workpiece with reinforced standard clamping: 10 kg/pc - total weight of workpieces, evenly distributed: 90/10 kg - throwing wheel rotation: 9000rpm - size (LxWxH): 1577x1512x1881 mm - weight: 900 kg
Ycqic
Pressure blasting cabin DSK 11.11.30. Blasting chamber W=1050 D=1050 H=955mm. 1 TÜV-tested pressure vessel 30l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1...
We offer continuous blasting equipment OMSG Lauco 250th year of manufacture - 2008 number of operating hours - 2420 total power input - 139kW number of throwing wheels - 8 power input of the throwing unit - 11kW max. Size of blasted part: width - 2500 mm height - 600 mm Machine parts: - suction with automatic filter unit - roller conveyors with sensors - 18m Equipment with complete documentation, the possibility of testing. The listed price does not include disassembly and loading on the truck.
...
COMBINED BLASTING AND PAINTING CHAMBER
Bxf8ebj9q
0 830 x 530 x 530 mm
Vveqvhez
operating pressure 2,2 - 5,5 bar
Air consumption 250 l/min.
weight of the machine ca. 50 Kg
0,95 x 0,65 x ,7 cm
ROLLER CONSTRUCTION PROFIL AND PLATE BLAST MACHINE BRAND : WHEELABRATOR SCHLICK
Brand: Wheelabrator Schlick
Year: 1996
Type: RB 3200Garantie: 6 monatige Funktions- und Gewährleistung
Inlet Width: 3.200mm
Inlet High: 1.000mm
Wheels: 6 x 15kW
Blow-and Brushstation: Yes
Inlet roll table: ca. 8.000mm
Outlet roll table: ca. 10.000mm
Inld. Filter, , Main Panel
TOP! Very Good condition, no change spare parts for a restart!!!
sgarantie bei Inbetriebnahme ...
The fine blasting unit FG 1 is nevertheless suitable for punctual work on large objects, as well as for the extremely precise processing of the smallest workpieces. The built-in dosing vibration allows on the one hand the use of a wide range of blasting media and on the other hand a wide control range which also allows lowest blasting pressures.
IS-Zubehör GmbH in Stuttgart offers maintenance, service, sales and spare parts for Sandmaster sandblasting machines and fine blasting machines
As exclu...
Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels
O7rh9tsl
Questions about technical specifications, etc. contact us in writing or by telephone.
Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.
We offer a completely refurbished blasting box with a filter unit, blasting equipment, floor vacuum cleaner, recuperation equipment for cleaning abrasives and monitoring equipment for the inner working space of the box. Blasting chamber with internal dimensions: length - 3400 mm, width - 2400 mm, height - 3500 mm. Total power consumption 13 kW. complete equipment without compressor. Any abrasive materials can be used for blasting. The device can be tested in operation. Condition of the new machi...
little used, fully functional
2 compressors Boge 40 KW
Air dryer, 1000 litre boiler, lighting extra for blasting room
Boocwrlxld
from the gravel silo, bucket conveyor, excavation with filter, plant is good for room size 5,00 m x 12,00 m height 4,00 m
best viewed on site
is sold as is
Receiver capacity 40 l
working pressure 4 - 8 bar
Air consumption 250 - 800 l/min.
weight of the machine ca. 20 Kg
770 x 415 x 365 mm
Mobile jet unit with extraction
Blnrh3kbmt
Consisting of:
microfilter
Boiler 40 liters
Blasting gun with 2.5m supply hose
RUBBER BELT SHOT BLASTING MACHINE WITH
WET FILTER
Designation: Rubber Belt Shot Blaster
Brand : OMSG
Type: SG 2,5
Belt Type: Rubber Belt
Charge max. kg: 500kg
Shot Wheel: 1 Pieces with 11kw with Driver
Belt : with Driver, width ca. 1.200mm
Fill weigth: 270 liters
Consisting of:
- Rubber Belt Shot Blaster Typ: SG 2,5
Guurx9j
- Main Panel
- Wet Filter Rösler
Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly
OPT...
Shot blasting machine OMSG Lauco 60 FAC
Year of production: 2011
Used machine. Fully operational.
Additional description: New turbines. Inner plating completely replaced (material X120Mn12).
Hours worked: 1197
Serial number: 11693
Number of turbines: 4
Turbine power: 4 kW
Ground clearance: 800x450mm
Mnw8j3g
Roller tables:
Inlet: 12m roller conveyor
Outlet: 12m roller conveyor
Documentation: electrical diagram, manual
Dismantling and loading: included
Injector blasting Cabinet / beam machine ISK802
Vbytf83z
Workspace B = 1200mm depth = 880 mm height = 745 mm.
Energy consumption approx. 0.6 KWh
The handy Jet cabin. With gas pressure relieved offers two Gelnk folding door damper in the open position a perfect free front and allowing the loading of heavier workpieces by means of forklift or crane.
For questions about technical specifications, etc. contact us in writing or by telephone.
Basis of the machines is the production at the site Großenlü...
We offer OTECO blasting equipment: type J 10-14-T-2 / 7.5. RV 2007. Equipment in perfect condition. Machine for surface cleaning of metals, with two throwing wheels with a diameter of 360 mm and a power input of 7.5 kW each. The machine includes a filter pulse unit, bucket conveyor + abrasive recuperation. The total power input of the machine is 22.5 kW. The device has complete documentation + regular service. The machine is put into operation immediately. Maximum dimensions of the blasted part ...
Glass bead blasting machine Auer K-10s with suction
Year of construction: 1989
Fw0w9lv
Receiver capacity 80 l
working pressure 4 - 8 bar
Air consumption 250 - 800 l/min.
weight of the machine ca. 36 Kg
1020 x 460 x 520 mm
Mobile jet unit with extraction
Consisting of:
Bogxc2i2yq
microfilter
Boiler 80 liters
Blasting gun with 2.5m supply hose
