Used sand blasting equipment for sale (143)

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Ppsdjupzmuspfx Amisr Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: new, Basic TWO Blasting Container – A New Standard in Sandblasting Introducing the SAPI Basic TWO Blasting Container—a true milestone in the sandblasting industry, designed with dual-container space to maximize functionality and efficiency. With its spacious layout and innovative features, this advanced sandblasting solution is perfect for professionals who need more room for their work without compromising on quality and performance. The Ideal Solution for Maximum Efficiency For companies seeking a comprehensive, practical, and high-quality sandblasting solution, the SAPI Basic TWO Blasting Container is the perfect choice. With its exceptional features and thoughtful design, it raises productivity and quality to a new level in the sandblasting industry. More Than Just a Container – A Complete Professional Solution The SAPI Basic TWO Blasting Container offers the perfect balance of space, functionality, and cutting-edge technology. Thanks to its innovative design and premium features, it is not just a simple container—it’s a fully operational solution that takes sandblasting to the next level of efficiency, effectiveness, and safety. Whether for large-scale projects with demanding requirements or precise detail work, this system provides the space, tools, and technology needed to complete the job efficiently, safely, and professionally. Key Features ✔ Spacious Blasting Area & Technical Room – The dual-container design provides ample workspace for sandblasting while ensuring a separate technical room for optimized workflow and easy equipment access. ✔ Plug-and-Play Convenience – The SAPI Basic TWO Blasting Container is designed for ease of use, requiring minimal setup so you can start blasting immediately. ✔ Enhanced Air Quality – Equipped with the SAPI Air Filter, the container ensures a cleaner and healthier work environment by effectively controlling dust and airborne particles. ✔ Dual Cleaning Modes with 5kW Abrasive Vacuum Turbo Cleaner – Efficient handling of abrasive recovery and cleaning with two modes for maximum flexibility and control during operation. Ppsdpjupzt Usfx Amior ✔ Durable, Rubber-Coated Walls – The interior walls are lined with heavy-duty rubber, ensuring resistance to intensive sandblasting operations while extending the lifespan of the workspace. ✔ Bright & Well-Lit Work Areas – Three high-powered LED lights are strategically placed to provide optimal visibility, ensuring precision and safety during sandblasting. ✔ Robust Premium 200-Liter Sandblasting System with Cyclone Cleaning – The powerful 200-liter system enables efficient and continuous blasting, while the integrated cyclone cleaning system improves abrasive quality, reduces waste, and boosts productivity. Blasting Room Dimensions ✔ Depth: 4.40 m ✔ Total Width: 2.25 m ✔ Total Height: 2.65 m

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. Psdpfswc Nrnox Amijpr The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Ppjdpfx Amowc Rk Eeier Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup work, but also protects the operator and those around them from the harmful effects of airborne particles. Ppjdpswc Rg Hefx Amisr With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. Thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ DINO II & DINO MASTER Available in 60 and 100 liter versions The SAPI pressure-return sandblaster "DINO" is a compact and universally applicable device. It is characterized by its robust construction and mobility. The blasting performance depends on various factors such as surface condition, compressor capacity, type of blasting media, etc. The cleaning performance is 3 - 10 m² / hour. Overall, this device provides the worker with a clean working environment, low abrasive consumption (thanks to the suction unit), and lower waste disposal costs. The device is used in the steel, shipbuilding, and petroleum industries, as well as for maintenance work in the construction sector, by stonemasons, and others.

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Ppsdpswc Afhefx Amisr Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Podpfx Ameun R N Asijpr Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: like new (used), functionality: fully functional, machine/vehicle number: 27324-1/1, input voltage: 400 V, Shot Blasting Machine Parts Ppedpfx Amswrp Nfsisr Three new Gostol tst turbines for shot blasting machines/surface treatment of metal elements.

Condition: repair required (used), Year of construction: 1984, operating hours: 6,646 h, functionality: fully functional, total width: 4,300 mm, total height: 6,030 mm, total length: 3,750 mm, GUTMANN Shot Blasting Machine type PH315 Hook-type shot blasting machine for workpieces up to 2100 mm in height, 900 mm in diameter, and a maximum weight of 500 kg. The machine requires an overhaul and has not been started since it was dismantled and transported from Germany. Technical documentation is available in German. Psdpswtpxisfx Amispr The machine is disassembled and stored outdoors. No CE mark. Currently equipped with 3x 1TZ90011DA234FB4Z turbines from Motorenmaier, 11 kW/12.6 S1. As spare parts: 3x TYP RF132S/20K from AGTOS, 7.5 kW (blades require repair). Tungsten plates for internal repairs of the shot blasting chamber are also included as spare parts. Total width with guides: 4300 mm Total height (assembled): 6030 mm Total length with guides: 3750 mm

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Psdpfxjwurhio Amiepr Manufacturer: KOVO Staněk Table diameter: 1,100 mm Year of manufacture: 2017 Weight: 2,500 kg Very good condition.

Condition: excellent (used), Year of construction: 2024, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, - Year of manufacture: 2024 - Machine operating hours: 2,000 h - Manganese mesh conveyor, 1,000 mm wide - Adjustable belt conveyor speed - 4 turbines, 11 kW, type Rutten Gamma 330 HD - Stepless turbine speed adjustment - Hot Spot chamber made of manganese and tool steel - Automatic workpiece detection - Automatic abrasive flow regulation - Automatic abrasive refilling - Automatic part blow-off Ppjdpewvgbgsfx Amisr - Rosler BF 40/40 dedusting system - The machine enables operation with GH grade, sharp-edged, ultra-hard blasting media - Turbine blades made of tungsten carbide provide guarantee for 30,000 h of operation - Turbine covers made of tungsten carbide provide extended protection against machine body wear

Condition: good (used), Hook type shotblasting machine 250 kg TURBOTECNICA DELTA GR 7-10 Type: Hook type Max. diameter of workpiece: 750 mm Max. height of workpiece: 1000 mm Max. workpiece weight: 250 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 260 Turbine wheel diameter: 260 mm Power of turbine: 5,5 kW Max. turbine flow: 74 kg/min Psdpfx Aswm Ar Nemiopr Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 2.000 m3/h Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is ready for operation

Condition: good (used), Hook type shotblasting machine 1800x2500 with motorised hook with crane Ppodpswrxczefx Amior SIRSI Type: Hook type Max. diameter of workpiece: 1800 mm Max. height of workpiece: 2500 mm Max. workpiece weight: 3.000 kg Machine hoist capacity: 1x 3.000 Kg Nr. Of turbines: 3 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 3x 7,5kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Total length of machine:

Condition: good (used), Year of construction: 2008, Hook type shotblasting machine 2700x3500 with motorised hook with crane CARLO BANFI Type: Hook type Max. diameter of workpiece: 2700 mm Max. height of workpiece: 3500 mm Max. workpiece weight: 12.000 kg Manual blasting chamber: YES Blow off chamber: YES Machine oppening width: Ppodpswq Ru Hefx Amier Nr. Of turbines: 16 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 16x 11kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Total length of machine:

Condition: good (used), Year of construction: 2018, Hook type shotblasting machine 500 kg TECNOBLAST GHIBLI 500 S/2 - 10x15 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Ppsdpfx Amswm Attoior Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm !!! YEAR OF PRODUCTION 2018 !!! Machine is in very good condition. Ready for operationa !!! VERY GOOD !!!

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Ppodovpgq Nopfx Amisr Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: excellent (used), OMSG CWB 850 4/FAC Type: Wire mesh conveyor Ppedpfewm Dbxex Amijr Max. width of workpiece: 850 mm Max. height of workpiece: 450 mm Nr. Of turbines: 4 Turbine wheel diameter: 350 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min x 4 Transport speed: 0,5 - 5 m/min Cleaner type: Airwash Filtering unit: Included Foundation: no Total width of machine: app. 3.000 mm Total height of machine: app. 5.000 mm Total length of machine: app. 7.000 mm Max installed power: app. 70 kW

Condition: repair required (used), Year of construction: 2008, operating hours: 4,000 h, functionality: limited functionality, Shotblasting machine for plates and europrofiles. 2.6 m width, 0,5 m height, 12 m infeed and 12 m outfeed motorised rollers. Machine is in working condition but needs a specialist that can do some refurbishments. Some refurbishments made already: - new suction ventilator motor, new turbine blades, interior protection plates like new, new elevator belt, new coupling between 1 turbine and motor. Ppodpfxovgbcuo Amior Needs refurbishments: - electrical cabinet (machine runs with a new controlling system, old control panel is not setup and not functional) - brush repair (present but defective - we are not using it) - electrical connections and sensors (some of them present but not used)