Parts Gutmann AGS SWL501

Gutmann

Year of construction: 1995, condition: ready for operation (used), A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible. Hsdpfowftcpjx Ab Toni

Condition: good (used), Technical data: Working length: 2050 mm Hnedpfx Abexruvzs Tei Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: repair required (used), Year of construction: 1984, operating hours: 6,646 h, functionality: fully functional, total width: 4,300 mm, total height: 6,030 mm, total length: 3,750 mm, GUTMANN Shot Blasting Machine type PH315 Hook-type shot blasting machine for workpieces up to 2100 mm in height, 900 mm in diameter, and a maximum weight of 500 kg. The machine requires an overhaul and has not been started since it was dismantled and transported from Germany. Technical documentation is available in German. The machine is disassembled and stored outdoors. No CE mark. Currently equipped with 3x 1TZ90011DA234FB4Z turbines from Motorenmaier, 11 kW/12.6 S1. As spare parts: 3x TYP RF132S/20K from AGTOS, 7.5 kW (blades require repair). Hnodpfxowtpxie Ab Tsi Tungsten plates for internal repairs of the shot blasting chamber are also included as spare parts. Total width with guides: 4300 mm Total height (assembled): 6030 mm Total length with guides: 3750 mm

Condition: ready for operation (used), With hydraulic pump. Hnedpfx Abjhw E D Ss Toi

Year of construction: 1983, condition: good (used), 1 Bracket milling machine make: RECKERMANN, type: KOMBI 900, year 1983 ser. no. 6367P, table size 1.000 x 310 mm, travel X/Y/Z 720 x 220 x 450 mm, Hnedpfx Aeh E Du Dsb Tsi tool holders SK 50, HD machine vice, spindle speeds: 3...2800 rpm

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm Hnedpfsflrg Tex Ab Toi weight: ca. 680 kg

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm spindle cone ISO: 40 (SK 40) table surface area: 760 x 420 mm table feed: längs: 10 - 500 (Eilgang: 1,4 m/min.) mm/min table feed: vertical: 5 - 250 (Eilgang: 1,4 m/min.) mm/min spindle turning speed - continuous: 32 - 1600 / 18 step U/min spindle head swivable left - right: 10 ° links / rechts ° quill stroke vertical: 125 mm feed continuous: 10 - 500 / 8 step mm/min rapid traverse: 1,4 m/min Total power requirement: 6,5 kW weight of the machine ca.: 3,0 t dimension machine xH: 2,3 x 2,0 x 1,85 m Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice Hnsdpfevc Avhex Ab Toi *

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 Hjdpfx Ajl Tuvdeb Teni -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm Hedpfou Rqabjx Ab Tsni facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: excellent (used), Year of construction: 2006, Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 Hnsdpfjwt N Uqjx Ab Tsi With accessories More pictures and data will follow shortly.