Used Injection Mold Article for sale (3,423)

Condition: used, Year of construction: 2003, Clamping force: approx. 50 tons Components: 1 Horizontal screw diameter: approx. 30 mm Core pull: 0 Hot runner zones: 0 Flow rate: approx. 130 l/min Frequency: 50 Hz Power supply: 3/N/PE AC 400 V Pressure: approx. 210 bar Current: 94 A Weight: approx. 3.3 tons Ijdpfszlhxiex Afvetk

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 182,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 116,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Itedpfx Ajznlhmefvjk

Condition: used, Year of construction: 2018, 3 x injection moulding machines Stork Machine type Commissioning Age in months Ijdpfex Uymaox Afvstk 4400-2150 19.12.2002 278 4400-2150 28.11.2012 159 6600-5650 01.11.2011 171

Condition: good (used), Year of construction: 2006, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM420-1900C2 Baujahr: 2006 Ijdezl Sfmepfx Afvjtk Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.047 cm³ Spritzteilgewicht: 853 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter SEPRO, Typ: SR4030 S3 VISUAL, Baujahr: 2006 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Platen size (h x v): 1050 x 980 mm Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Leveling elements Handling Data Manufacturer: ENGEL Itodozgt Irjpfx Afvok Control: ER-HLI 81 Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG

Condition: used, Year of construction: 2005, operating hours: 63,000 h, functionality: fully functional, clamping force: 400 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 400-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2005 Itedju Hqh Rjpfx Afvok Operating hours: 63,000 h Cylinder: Ø 25 Clamping force: 400 kN Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, clearance between the columns: 1,200 mm, displacement volume: 12,193 cm³, injection pressure: 1,500 bar, injection weight: 11,584 g, opening stroke: 1,400 mm, Used Stork IMM 12000-19000 injection molding machine. Itjdowhkfyspfx Afvok

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Iedpsx I Rqcsfx Afvetk

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Isdpfx Afozl Tc Tjvstk Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 1999, operating hours: 95,616 h, clamping force: 1,300 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 194 g, Arburg 520C-1300-350 (163) with bimetallic plasticizing unit General information Product Code: 163 Availability: In Stock Year of production: 1999 Brand: Arburg Technical data Shot Weight: 194 g Clamping Force: 1,300 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 520x520 mm Platen size: 715x715 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 95616 h Weight: 6380 kg Itsdpfx Afovt Rvdjvek Dimensions: 5,1x1,9 m Hopper: No Core pull: Yes Euromap: Yes

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM420-4300CX Baujahr: 2012 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Iedpeyak Ecsfx Afvetk Schnecken DN: 80 mm Max. Hubvolumen: 1.810 cm³ Spritzteilgewicht: 1.647 g/PS Steuerung: MC6 Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing Isdpfjuggb Djx Afvotk  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2006, Operating hours: 30,471,625 Itodpfx Aezlg Uvefvjk Clamping force: approx. 800 t Tie bar spacing: approx. 420 mm Flow rate: approx. 103 l/min Frequency: 50 Hz Power supply: 400 V Pressure: approx. 210 bar Current: 82 A Weight: approx. 4.0 t

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, injection pressure: 2,500 bar, For sale: Injection moulding machine Arburg 820S 4000-2100, serial no. 195746. The item is in good condition. Technical specifications: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Maximum mould height: 850 mm Maximum opening stroke: 700 mm Maximum distance between platens: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Maximum weight of moving mould half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzles Net weight of machine: 22,700 kg Isdpexxi Nvofx Afvjtk Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Auto mode: 58,556 Transport and loading can be organised Europe-wide on request, at an additional cost. Prices excl. VAT Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing business? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Year: 2004 Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Shot volume ccm: 193 & 251 Operating hours: approx. 63,000 h Itsdpfxjymn Inj Afvek Complete line: – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition Itjdpfxsnfu I Is Afvjk ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Iodpjzpanwefx Afvotk Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: ERGOTECH 200 - 840, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, mold height (min.): 340 mm, plate width: 860 mm, plate height: 860 mm, pump power: 30,000 W, The machine is fully operational and was working with injection until the end. Itjdjyxn Tvopfx Afvok

Condition: good (used), Year of construction: 2002, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM575-1900C2 Baujahr: 2002 Schließkraft: 575 Tonnen Holmabstand 1000 x 1097 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.097 cm³ Spritzteilgewicht: 998 g/PS Steuerung: MC4 Ausstattung: 5 St. Kernzug Ijdpfx Afsyak Htsvstk Roboter, Hersteller: Reis, Baujahr: 2015 24- Fach Heisszonenkanalregelung Förderband Schutzzaun

Condition: used, This Ferromatik Milacron K-TEC 60 injection molding machine will be auctioned off online as part of our industrial auction / machine auction post-auction for Wirthwein Friedberg GmbH - machines, packaging, and other materials. Itedpfxjzqyk Ie Afvok You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment Isdsywrtwepfx Afvstk 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Iedpfozc Nbbjx Afvetk Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2001 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 550 mm Öffnungsweg: 700 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: Iedpszl T Snsfx Afvetk -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 Iedezc N Aropfx Afvotk 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm Iedpfx Afexwva Eevstk - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive An inspection can be arranged at any time by appointment.