Used Jpt 310 for sale (2,228)

Condition: used, Year of construction: 2015, Year of manufacture: Jan 2015 Bsdsx T Acnspfx Af Holk Serial number: 310/80R22.5 Very niceheavy duty terminal tractor tires 4 x 28 mm profile 1 x 20 mm profile

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 22,000 kg, overall weight: 29,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,170 mm, total length: 11,700 mm, total width: 2,550 mm, total height: 2,650 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, drawbar plate with interchangeable 2 kingpin, with 2 kingpin positions Outer frame slightly angled with load-lock profile for lashing straps 2 pairs of lashing eyes embedded in the outer frame on the gooseneck, 5 tons each Bjdpji Ri Hvofx Af Hslk 8 pairs of lashing eyes embedded in the outer frame in the well, 5 tons each 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 outrigger wedges with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell fenders in front of and behind the axle assembly 2 storage boxes made of stainless steel, w=600/h=400/d=500 mm, with polished, lockable door 2 pairs of pole pockets embedded in the outer frame on the gooseneck, internal dimension 70 x 40 mm 6 pairs of pole pockets embedded in the outer frame in the well, 70 x 40 mm Internal dimensions!! Internal width between the poles 2420 mm!! 3 lashing/pole strips in the well, transverse embedded in the floor over the entire width up to the outer frame, approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a cover, half open downwards. For lashing and inserting poles 80 x 80 mm. Pieces of insertable poles W=80/ D=50/ L=1200 mm, hot-dip galvanized Pieces of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, with support beam, at the center of gravity at approx. 500 mm, loadable with 2000 kg over the entire width, at 1000 mm with 1000 kg over the entire width and at 1500 mm with 500 kg over the entire width, including underrun protection with lighting, extendable. 2 pairs of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Storage compartment for insertable poles, open, on the front panel or below the loading area (for 10 insertable poles 80 x 50 x 1200 mm and 4 insertable poles 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering knuckle, with automatic reversing lock via reversing light and additional locking function on the vehicle via a button. Air suspension with raise/lower valve Wheels & Tires 235 / 75 R 17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition via EBS-Canbus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no factory installation. Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via the reversing light 1 LED rotating beacon with holder, swit

Condition: used, Year of construction: 2003, turning diameter 210 mm Bsdpfx Aotqmmuef Helk turning length 580 mm control 840 D Siemens centre height 190 mm turning diameter over bed 330 mm turning dia. over face-slide 260 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle bore 68,5 mm max. usable bar diameter 51 mm C - Axis 0,001 ° travel -x axis 185 mm travel -z axis 455 mm number of toolpositions 12 pos. tool taper VDI 30 Driven Tool Stations: 6 pos. tailstock adjustment 400 mm intake pressure max. 4.000 N rapid traverse X: 20 / Z: 30 m/min Feed force ( X / Y / Z ) 4,5 kN total power requirement 21 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 8,0 x 2,2 x 2,0 m CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. IRCO Breuning bar loader - incl. 2x chucks, incl. various jaws - incl. 63x VDI30 turning tool holders - incl. 7x driven tools - incl. 6x reduction tubes

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Bledpfx Aeza D Iwof Hjk Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: excellent (used), mileage: 971,464 km, power: 310 kW (421.48 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: automatic, suspension: other, loading space length: 8,050 mm, loading space width: 2,460 mm, loading space height: 3,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electric window regulation, fog lights, parking heater, retarder, spoiler, tail-lift, = Additional options and equipment = - Aluminum fuel tank - Brake booster - Roof spoiler - Intarder - Air conditioning - Radio/CD player - Sun visor Bodpfx Afjzdbv Hs Helk - Auxiliary heater = Notes = TRANSPORT TO ANTWERP €590 = Additional information = Front axle: Steered; Suspension: Parabolic springs Rear axle: Twin tires; Suspension: Air suspension Unladen weight: 9,830 kg Payload: 9,170 kg Gross vehicle weight: 19,000 kg Technical condition: Very good Visual condition: Very good Reference number: 10

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver Blodpsyu Nb Esfx Af Hok incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (grain size less than 18 mm) - Material must be pure, with an ash content of less than 1% ATRO Pay attention to: sand, stones, and minerals - Compressed using press tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options at an extra cost: Plant construction / mütek system technology: - mütek Shredder MRZ shredding technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Transport screws - Silos - Control system interfaces of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after testing Bjdpofbb Arjfx Af Helk Operating principle: The machine has a silo with a stirrer. In each of the 4 corners of the storage silo, there is a vertical screw that compacts the material downwards into the compression chamber. The machine operates with two cylinders, each of which compresses in two directions (either when the cylinder moves forward or backward). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for automatic feeding of the heating boiler Format Ø 30 mm Throughput up to a maximum of 310 kg/h Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables the firing of industrial furnaces via screw feed. Fully automatic 24-hour operation possible. High energy efficiency. Briquettes/pellets with consistently high quality and density. For automatic feeding into industrial furnaces Small to medium quantities of wood chips, which are produced in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format is an attractive alternative. Unlike our conventional briquettes, these can be automatically fed into industrial furnaces. In addition to wood, various other materials can also be processed without any problems (various biomass and agar-based materials).

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Bjdpfeyzxa Esx Af Hjlk Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Year of construction: 2011, condition: ready for operation (used), Swing diameter over bed/facing slide: 330mm/260mm, max. turning diameter: 200mm, max. turning length: 450mm, travel X/Z: 160mm/450mm, rapid traverse: 30m/min, speed: 5000rpm, tool stations: 12, tool holder: VDI30, max. workpiece weight: 100kg. Machine dimensions X/Y/Z: approx. 3300mm/1750mm/2400mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible. Bsdpfxezdkpho Af Hslk

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours and in like-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in like-new condition. This is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but has now been released for sale as part of a site relocation. Bledpfjwb Dl Tox Af Hok • The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000. The selling price is €78,500 including crane. I can provide you with the technical data upon request, but it is also available in the documents below. Included in the price: Dismantling the crane onto two Euro pallets, as well as removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be inspected there. Delivery is possible within a few days. You can find the order confirmation from ENGEL to NYPRO in the documents below!

Condition: used, mileage: 370,000 km, power: 279 kW (379.33 HP), first registration: 06/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro4, Equipment: ABS, air conditioning, Manufacturer Scania Model P380 LB6x2?4 Hvidtved Larsen FlexLine 310 Bsdpexlw Efsfx Af Hslk Year 2008 Condition Good Serial Number XLEP6X20005200736 Ref. nr. 527999 Reg. date: 10-06-2008 Hk: 380 Km: 370000 Gearbox: GRS905 Manual Eurotype: 4 Diesel tank: 1 Tank liter: 300 L Cabin type: CP16 Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/80R22.5 - 315/80R22.5 - 315/80R22.5 Cover% left 60% - 60% - 50% Front suspension: Air Suspension rear: Air Wheelbase: 4500 mm Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 17510 Kg Load capacity 8490 Kg Manufacturer: Hvidtved Larsen FlexLine 310 Tank capacity: 10,000 L High pressure pump: Uraca KD 716G High pressure capacity: 390 l/min 140 bar High pressure pump hours: 2179 Vacuum pump: Wittig RFW 200 Vacuum capacity: 20,600 l/min no.: Vacuum pump timer: 2660 Remote control: ?

Condition: used, Year of construction: 1989, Manufacturer: Safan Type: VS 310-10 Cutting width: 3100mm Max. Thickness: 10mm Motor-power: 15kW Machine indicated cutting line, but is without backgauge. Blsdpewnhivefx Af Hsk - Year: 1989 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 267,400 km, first registration: 12/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 2,500 mm, loading space length: 7,980 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2014, Equipment: ABS, air conditioning, tail-lift, 3-chamber cooling system Chamber 1: L x W x H 6200 mm - 820 mm - 2000 mm Chamber 2: L x W x H 1710 mm - 820 mm - 2000 mm Chamber 3: L x W x H 7940 mm - 1610 mm - 2000 mm Double-leaf doors and Palfinger tail lift with a load capacity of 2,000 kg Double side doors on the right - cargo area Bsdpfx Afozc Av Eo Holk

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. Blsdpfx Ajyx N Hqjf Hek The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min Bljdjy N U Rcepfx Af Hok • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Raw mother-board width before longitudinal ripping: 900–1260 mm • Panels are longitudinally divided prior to digital printing and coating operations • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal ripping system with up to 5 saw cuts plus 2 trimming units for production of finished plank widths from 160–510 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) / Alternative stacking configuration maximum stack weight: 3500 kg • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: used, mileage: 108,405 km, power: 70 kW (95.17 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 2,316 kg, maximum load weight: 1,184 kg, overall weight: 3,500 kg, tire size: 235/65R16C, axle configuration: 4x2, wheelbase: 3,665 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 6, loading space length: 2,400 mm, loading space width: 1,800 mm, loading space height: 450 mm, Equipment: ABS, additional headlights, air conditioning, cabin, electronic stability program (ESP), low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, Doka, 1x comfort seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, auxiliary heating, switch 6, ABS (anti-lock braking system), rotating beacon, storage box, leaf suspension, trailer coupling ball head, noise protection G1, U-protection, green environmental badge Wheelbase: 3665 mm Body: Rear tipper body approx. 2m³ ESP, rear axle stabilizer bar, reinforced front axle stabilizer bar, reinforced shock absorbers, lockable glove compartment, auxiliary hot water heater, exterior temperature display, adaptive brake light, driver airbag, smoker package. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bsdpsvhnkzjfx Af Hjlk - .

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) Bsdpeywpcpsfx Af Helk • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Condition: used, mileage: 127,570 km, power: 70 kW (95.17 HP), first registration: 12/2010, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2010, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, immobilizer system, onboard computer, traction control, The used 2010 Mercedes-Benz Sprinter 310 CDI Maxi offers robust performance and versatility for your transport needs. Equipped with a 2,143 cc 4-cylinder diesel engine, 70 kW (95 hp) output, and Euro 5 emissions rating, this Sprinter is both efficient and environmentally friendly. The automatic rear-wheel drive ensures comfortable handling. The vehicle comes in a striking yellow finish and features practical equipment such as full-length shelving, cameras for improved visibility, and a walk-in box body. With dimensions of 7,057 mm in length, 2,100 mm in width, and 2,694 mm in height, the Sprinter provides ample cargo space for a variety of requirements. The wheelbase measures 4,325 mm, and the permitted gross vehicle weight is 3,500 kg. With a mileage of 127,570 km and just one previous owner, the Sprinter is in used but well-maintained condition. It is configured for two seats, and the green emissions sticker highlights its suitability for city centres. Optional registration and delivery service within Germany is available for an additional fee. Viewing is possible without prior appointment. Sale to commercial customers only (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. Bedjx Nznnepfx Af Hslk

Condition: used, mileage: 144,165 km, power: 70 kW (95.17 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 11/2025, fuel: diesel, CO₂ emissions: 262 g/km, fuel consumption (urban): 11.7 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,390 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi box van is from 2011 and complies with the Euro 5 emissions standard. The vehicle is powered by a 2.1-litre diesel engine delivering 70 kW (95 hp) and is equipped with an automatic transmission. The odometer reading is 144,165 km. The Sprinter has environmental badge 4 (green) and is registered until November 2025. The Sprinter is finished in Ginstergelb (broom yellow) and features four doors and two seats. It has a length of 7,057 mm, a width of 2,100 mm, and a height of 2,694 mm. With a wheelbase of 4,325 mm, this vehicle provides ample space and stable handling. The permissible gross vehicle weight is 3,500 kg, which facilitates the transport of goods and equipment. The vehicle is equipped with cameras, a walkthrough access, and shelving units in the cargo area, optimizing it for various commercial applications. Combined fuel consumption is 9.9 litres per 100 km. Sale is only to businesses (agricultural, freelance, small and large enterprises) or for export. Subject to prior sale and errors. Blodjxb Ezgjpfx Af Hjk

Condition: used, mileage: 106,189 km, power: 70 kW (95.17 HP), first registration: 12/2010, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2010, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Drives up to 4th gear. Blsdpfx Ajtfakxof Hek The Mercedes-Benz Sprinter 310 CDI Maxi Euro 5 box van was first registered on 17/12/2010 and has a mileage of 106,189 km. This transporter is powered by a 2,143 cc diesel engine producing 70 kW (95 hp), features an automatic transmission, and rear-wheel drive. As a Euro 5 emission class vehicle, it is equipped with a green emissions sticker (category 4), making it suitable for use in most low emission zones. The Sprinter offers a spacious loading area, with an overall length of 7,057 mm and a wheelbase of 4,325 mm. The walk-through box body and integrated shelving make this vehicle ideal for transport and logistics applications. Safety features such as the integrated camera assist with maneuvering and daily operation. The permissible gross vehicle weight is 3,500 kg. The Sprinter is in well-maintained condition, has had one previous owner, and is classified as a used vehicle. The main inspection is valid until January 2025. Viewings are possible at any time in Rohrbach without prior appointment. The seller also provides a registration service and can deliver within Germany for an additional fee. More Information Sale to traders only (agriculture, freelancers, small and large businesses) or export. Subject to prior sale and errors excepted.

Condition: used, mileage: 95,976 km, power: 70 kW (95.17 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 05/2024, fuel: diesel, CO₂ emissions: 262 g/km, fuel consumption (urban): 11.7 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,390 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi Euro-5 is a reliable box van from 2011. With a mileage of 95,976 km and a powerful 2,143 cc engine, it offers 70 kW (95 hp) and complies with the Euro 5 emissions standard. The vehicle is powered by a diesel engine and is equipped with an automatic transmission and rear-wheel drive. Blodpfx Aoy N Enljf Hok This Sprinter features a spacious interior with shelving and a practical walk-through compartment. Its dimensions are 7,057 mm in length, 2,100 mm in width, and 2,694 mm in height, with a wheelbase of 4,325 mm. It has a green environmental badge (category 4) and a combined fuel consumption of 9.9 l/100 km. Registration is valid until May 2024, and the vehicle has had one previous owner. The box van is painted yellow and comes with four doors and two seats. Viewings can be arranged without prior appointment, and delivery within Germany is available at an additional cost. Sale only to commercial customers (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Condition: used, mileage: 152,635 km, power: 70 kW (95.17 HP), first registration: 02/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The used Mercedes-Benz Sprinter 310 CDI Maxi, year of manufacture 2011, with a mileage of 152,635 km, offers a reliable transport solution. This van is powered by a 2,143 cc four-cylinder diesel engine delivering 70 kW (95 hp) and complies with the Euro 5 emission standard. With an average combined fuel consumption of 9.8 l/100 km and an automated transmission, this yellow van with metallic paintwork is ideal for efficient use in both urban and interurban traffic. Bedjyntfhspfx Af Holk The vehicle features a spacious box body design with a maximum gross weight of 3,500 kg, made possible by its generous exterior dimensions of 7,057 mm length, 2,694 mm height, and 2,100 mm width. The wheelbase measures 4,325 mm. The Sprinter provides seating for two and is equipped with a practical reverse camera for added safety when manoeuvring. The cargo area includes shelving systems for easy storage and organisation of goods. This Sprinter is especially suitable for commercial buyers such as farmers, the self-employed, or large businesses. Viewings are possible at any time without prior appointment. Registration service and nationwide delivery within Germany are available for an additional fee. The vehicle is equipped with a yellow Euro 4 environmental badge, completing the practical overall package of this robust transporter. Sale strictly to commercial customers (agricultural businesses, self-employed professionals, small and large enterprises) or for export. Errors and prior sale excepted.

Condition: used, mileage: 135,086 km, power: 70 kW (95.17 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, For sale is a Mercedes-Benz SPRINTER 310 CDI with box body, integrated shelving, and rear-view camera, first registered in June 2011, with a mileage of 135,086 km. The 2.1-liter diesel engine, paired with automatic transmission and rear-wheel drive, complies with the Euro 5 emissions standard and delivers reliable, durable, and high-performance operation, making the Sprinter an ideal vehicle for tradespeople, delivery services, or commercial transport. The box body provides generous cargo space and reliably protects transported goods, tools, or materials. The fitted shelving ensures efficient and organized management of the loading area, so that all materials, tools, or spare parts are always within easy reach. The rear-view camera makes maneuvering and parking easier—even in tight operating yards or busy streets—and enhances safety in all maneuvers. The Mercedes-Benz SPRINTER stands out for its robust construction, high-quality engineering, and durable design, which remains reliable even under intensive commercial use. The vehicle is comfortable to drive, highly versatile, and perfectly suited for deliveries, installation assignments, or the transport of various types of goods. Bledpjx Em Tbefx Af Hek This vehicle is immediately ready for operation and offers a combination of performance, versatility, and comfort, making it an essential partner for trades, service providers, and logistics companies. Viewing or test drives can be arranged at any time by appointment, allowing you to see for yourself the reliability, efficiency, and practicality of this Mercedes-Benz SPRINTER 310 CDI. Sale only to businesses (agriculture, self-employed, small and large enterprises) or export. Subject to prior sale and errors excepted.

Condition: used, mileage: 178,066 km, power: 70 kW (95.17 HP), first registration: 01/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 03/2027, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz SPRINTER 310 CDI MAXI is a versatile box van that, due to its size and flexibility, is ideal for commercial use. This panel van was manufactured in 2011 and has a mileage of 178,066 km. It is equipped with a diesel engine delivering 70 kW (95 hp) and complies with the Euro 5 emissions standard. The automatic transmission ensures a comfortable driving experience. With its striking yellow metallic paintwork and practical high roof, this Sprinter offers both style and functionality. Bsdpfx Afew U E Aro Hjlk The SPRINTER is fitted with key features such as an integrated shelving system and a rear-view camera, facilitating everyday operations. The generous external dimensions allow for the transport of large loads, while the thoughtfully designed interior maximizes the available cargo space. The green environmental badge classifies the vehicle as environmentally friendly. With a gross vehicle weight rating of up to 3,500 kg, this used box van provides a stable and reliable solution for a variety of transport needs, whether for urban or long-distance journeys. Viewings are available by appointment; registration services and nationwide delivery within Germany are also offered for an additional fee. Sale is only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: used, mileage: 115,690 km, power: 70 kW (95.17 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 2,570 kg, maximum load weight: 930 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2012, construction height: 2,700 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, This used Mercedes-Benz Sprinter 310 CDI Maxi is a Euro 5 van featuring a box body. First registered in July 2012, it has a mileage of 115,690 km. It is powered by a 2,143 cc diesel engine rated at 70 kW (95 hp), equipped with automatic transmission and rear-wheel drive. The van is finished in yellow paintwork and offers seating for two occupants. Practical features include shelving in the cargo box, a camera for enhanced driver experience, and a walk-through from the cab to the cargo area. The Sprinter meets Euro 5 emissions standards, with a combined fuel consumption of 9.8 l/100 km and CO2 emissions of 259 g/km. Bledew U E Axopfx Af Hjk The vehicle measures 7,057 mm in length, 2,100 mm in width, and 2,700 mm in height, with a wheelbase of 4,325 mm and a permissible gross vehicle weight of 3,500 kg. Viewing is possible during business hours without prior appointment. Further information is available on the provider’s website. Sale exclusively to businesses (agriculture, freelancers, small and large enterprises) or for export. Errors and prior sale excepted.