Used J&S Engineering for sale (76,641)

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Fpodpet Uircsfx Al Uon Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: used, Year of construction: 2015, input voltage: 230 V, Equipment: CE marking, installation consisting of controlled compressors to regulate the pressure and expansion tanks with bellows C10.1-6 Connect 0.6kW 0/5bar C15.1-10 Connect 1.2 kW 0/10bar DU 500.10 - 500L 0/10bar CG 1000.10 - 1000L 0/10bar CG 2000.6 - 2000L 6/8.6bar CG 2000.6 E - 2000L 6/8.6bar Fjdpfszcdyfox Al Ujpn

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Fpedoy Dtyropfx Al Uen

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Fodpfxsy Hlvwo Al Uopn Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Fpedsy Hlkbepfx Al Usn Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: Fpedpfezk N S Ujx Al Usn - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Fsdpfsz Ib R Isx Al Uepn Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fanuc S-500iB robot, R-J3iB with 7th axis/motor Year of manufacture: 8/2006 Controller: R-J3iB Number of axes: 6 Max. payload: 15 kg Max. working range: approx. 2757 mm Profibus Scope of delivery: Robot, controller, cables, teach pendant, operating manual, circuit diagrams Fpsdsz I N I Ijpfx Al Uen Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Forwarding costs on request – please specify the delivery address.

Condition: used, Year of construction: 2021, A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible. Fsdpfjzvy Ecjx Al Uspn

Condition: used, Year of construction: 2007, functionality: fully functional, BOTTERO 352 BCS-J - Year 2007 Monolithic glass automatic cutting table Shape cutting Tilting function Air cushion system Breaking bars: 3 short, 1 long Glass size: 6100 x 3300 mm Thickness: 2-19 mm Fpjdjz N Hruepfx Al Uen Speed: 120 m/min Accuracy: +- 0.25 mm Power: 16 kW

Year of construction: 2007, condition: used, functionality: unexamined, machine/vehicle number: 151 000/69, We are offering this used Weil Engineering longitudinal seam welding machine, model Flexmaster 400 WIG, manufactured in 2007. Fodpfx Alszxqb He Uopn If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 4,000 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 960 mm, number of axes: 5, This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details. • Control: Smooth G • Distance between spindles: 1000 + 440 mm • Max machining diameter: 500 mm • Spindle attachment: A2-6 • Max bar capacity: 65 mm • Spindle bore: 76 mm • Tool magazine: 36 Capto Fpodpfx Aljyxc N Ej Uen Additional equipment • Chip conveyor: Mayfran belt type

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min Fjdpez Ipzujfx Al Uspn • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2018, functionality: fully functional, number of spindles: 35, SECOND-HAND MULTISPINDLE DRILL WITH 35 SPINDLES MAGGI BORING SYSTEM 35 YEAR 2018 - Center distance 32 mm. Fpodpfx Ajx Rcqgel Ujn

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 571 h, For sale is a tandem press brake with working widths of 3 meters and 4 meters, respectively. The two machines can be operated synchronously and in parallel, providing a total working width of 7 meters. Fpedpjz I Ifxofx Al Uen Each machine has only been used for 571 hours and 423 hours, respectively, and has been regularly maintained and is fully functional. The machines are being sold due to the closure of the business. Further information is available by phone or email.

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle diameter: 200 mm, Equipment: documentation/manual, Mazak Integrex J200s Fpedpezz Rt Uefx Al Usn Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,840 mm, total width: 1,900 mm, overall weight: 7,100 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2020. It features a maximum spindle speed of 18,000 rpm and a rapid traverse rate of 30,000 mm/min. The machine includes a tool magazine capacity of 30 tools and a robust table size of 500 x 400 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • CNC control: MAZATROL SmoothX with 19-inch colour touchscreenWorking capacity and travels • A-axis tilt: -120° to +30° • C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis index time: 0.6 s per 90° • C-axis index time: 0.55 s per 90° / 1.05 s per 180°Table and clearances • Tilting/rotary table (A/C axes) • Table size: 500 × 400 mm • Table with T-slots (as per final configuration) • Spindle nose to table surface (table horizontal): 50–560 mm • Spindle nose to table centre (table vertical): 40–550 mmSpindle • Spindle chiller with 16 L cooling oil tank • Programmable spindle orientation in 1° incrementsTool magazine and ATC • ATC with recovery function; digital magazine display and external operating panel • Tool selection: fixed addresses with automatic shortest-path selection • Pull stud: Yamazaki ANSI • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm • Max tool diameter with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 sMeasuring and probing • Renishaw RMP600 radio workpiece probe • MAZA-CHECK system • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement • Absolute positioning systemCoolant and chip management • Through-tool high-pressure coolant: approx. 15 kgf/cm² (≈14.7 bar), approx. 35 L/min • Coolant tank: 300 L • Coolant washdown system and manual washdown gun • Cooling for X/Y/Z ball screws • Workpiece air blastControl and software • MAZATROL SmoothX CNC • EIA/ISO programming package • Simultaneous 5-axis control • Additional 5-axis machining package for SmoothX • 3D coordinate rotation • Smooth synchronous tapping • G00 Slope Constant (rapid optimization) • Smooth restart • Tilted machining plane • Inverse Time Feed • Extended work offsets: 300 pairs • Variable macros: 600 variables • High-speed machining and smoothing • Geometric compensation for rotary axes • Interfaces: USB, LAN, SD cardConstruction, safety, and other features • Electronic handwheel • Three-colour signal tower • Automatic machine power on/off and warm-up • Roller linear guideways • Full enclosure with top cover; interlocked operator door • Work area lighting • Intelligent Safety Shield (ISS) • CE marking Additional equipment • CROWTHER right-side hinged-belt chip conveyor (for steel machining) • GX500 mist extraction unit with extraction preparation • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Fpodpoz Iqgrjfx Al Usn Through-spindle Coolant Yes

Condition: used, Multi-spindle drilling machine Maggi BS 35 2/26. Fpodpjzkh Rcjfx Al Uon

Condition: ready for operation (used), We offer this ready for use B.I.P. Engineering BIPEL 150 T Rubber Vulcanising Press. It is currently installed so can be seen running in situation. We have attached a data sheet which shows the key Dimensions. Type: 150 FAOL Serial Number: 8620 Voltage: 440 V Phase: 3 Frequency: 50 Hz Apparent power: 100 kVA Price in GBP = £16,000 Fsdpfjz D Igbex Al Uspn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Fpsdpfx Alsw U Sw Aj Usn Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: excellent (used), Year of construction: 2018, mazak j-200s technical dataFor this search query, no AI-generated overview is availableCurrently, an AI-generated overview cannot be provided. Please try again later.AI overview +6 The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with sub-spindle (S) for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {\(\emptyset 500\text{\ mm}\)}, and a machining length of up to {\(910\text{\ mm}\)}. The B-axis offers a swivel range from {\(-30^{\circ }\)} to {\(+190^{\circ }\)}. Main technical data (Integrex j-200S): Machining capacity:Max. swing diameter: {\(530\text{\ mm}\)}Max. machining diameter: {\(\emptyset 500\text{\ mm}\)}Max. machining length: {\(910\text{\ mm}\)}Main spindle & sub-spindle:Chuck size (main & sub-spindle): 8 inchesMain spindle speed: {\(5,000\text{\ min}^{-1}\)}Main spindle power (40% duty cycle): {\(18.5\text{\ kW}\)}Milling spindle (B-axis):Speed: {\(12,000\text{\ min}^{-1}\)} (typical for the j-series, may vary with optional configurations)Swivel range: {\(-30^{\circ }\)} to {\(+190^{\circ }\)} (or a total range of 220°)Tool interface: KM63 or CAPTO C6Axes & capacity:Y-axis travel: {\(200\text{\ mm}\)} ({\(\pm 100\text{\ mm}\)})X/Z axes: {\(450\text{\ mm}\)} / {\(1119\text{\ mm}\)}Tool magazine: 20–36 tools (depending on configuration)Control: MAZATROL SmoothG or Matrix Nexus 2 The machine features a full C-axis for both spindles and an automatic tool changer, making it suitable for highly productive applications in a compact design. Fodpfx Aloyfgdlo Ujpn

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough Fpsdpfx Alsu Ibu Rs Uon *

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Fjdpsihp Ipjfx Al Uepn

Condition: used, Fire extinguisher, foam extinguisher, foam fire extinguisher, fire truck -Manufacturer: Jockel, foam extinguisher, mobile foam fire extinguisher -Type: S 50 J Externa Bio -Content: 50 liters -Fire classes: A and B Fodpfx Aljrzvw Eo Ujpn -Technical data/test label: see photos -Number: 2x fire extinguishers available -Price per piece -Dimensions: 550/440/H1100mm / 600/450/H1110mm -Weight: 87 kg/pc.

Condition: excellent (used), Catalog number 7866 TECHNICAL DATA - max. disc diameter 300mm - disc bore diameter 30mm - disc guard - cutting height with installed disc 250mm, 60mm - max. cutting width 600mm - possibility of angled cutting in the vertical plane - arm adjustment or disc adjustment - arm rotation possible: right/left - motor 3kW - table dimensions 1130x1010mm - dust extraction port diameter 50mm - dimensions L/W/H 1150x1190x1510mm - weight 220kg Fsdpfxszkg H Ne Al Uspn ADVANTAGES - Made in Italy - Unpainted - DTR documentation included - Very good condition - Used saw Net price: 6500 PLN Net price: 1512 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)