RAIMANN Econorip 310 multi-saw

WEINIG Econorip 310

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Chodpfjiidm Nox Akted Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Cjdjmiik Tepfx Aktehd Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: used, Year of construction: 1988, functionality: fully functional, overall weight: 2,200 kg, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min Cjdpfx Akjk Sat Dstshd weight 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Round workpiece grinder Manufacturer: BRUSA & GARBOLI Country of manufacture: Italy Model: LT 130 - BRUSA DI GARBOLI Year: 2023 Technical parameters: min. diameter (with special feed rollers): 10 mm Chodoxdivaspfx Aktsd max. diameter 127 mm min. - max. length 680 - 6000 mm sanding belt size 2000 x 120 mm disk motor power 2.2 kw sanding belt motor power 5.5 kw feed motor power 0.25 kw feed speed 1 - 20 m/min weight 760 kg dimensions 160 x 13 5x 170 cm electrical connection 400V / 50Hz feed system self-centering feed speed regulation frequency sanding belts 1 set Adjustment tools 1 set Instruction manual 1 set CE certificate of conformity Optional equipment: PLC control unit “Keyence” photocell, control of opening/closing of the grinding belts Outgoing workpiece feed rollers with drive

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Chjdemig Tdepfx Aktjd Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: as good as new (ex-display), Year of construction: 2026, -Usable internal dimensions: D=900mm H=580mm Chedpfx Akof A D Itstjd (other sizes available upon request) -Spraying pressure: 3.2 Bar -Basket load: 200kg -Tank volume: 130L -Standard accessories: • Oil skimmer • Pumping device • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction • Basket made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR110 Ricardo Motor Newpower generator generator set Continuous power: 100 kVA / 80kW Maximum power: 110kVA / 88kW Engine : Kofo RIcardo R6105ZDS, 6 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2930x1030x1260 mm Weight: approx. 1320kg Diesel tank: 125 L At 100% load: approx. 21.1 L/h At 75% load: approx. 15.0 L/h At 50% load: approx. 10.7 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 250A automatic switch : € 1080 Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge Cjdpfon D Hurex Aktehd - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, total width: 4,600 mm, total height: 1,830 mm, Year of manufacture: 2006 Dimensions (LxBxH): 217 x 460 x 183 cm Chsdpfx Akjwnig Njtod - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Csdpfx Aex Ebzdjktehd Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads Chsdpfewvql Nsx Akted • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale