Pstrągowski

Condition: used, Year of construction: 2013, Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Njdpsz Et Uyefx Afuelg Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data - Manufacturer: KOSME - Model: FLEXA 15/720 P3 MM - Year of manufacture: 2013 - Machine type: rotary labeller, wet glue and hot melt - Labelling stations: 2 x wet glue, 1 x hot melt - Label feed: magazines for pre-cut labels - Formats set up: 4, covering 400-450 g/ml containers - Output: up to 15,000 bottles per hour - Dimensions (L x W): approx. 3,800 x 3,000 mm - Operating hours: 33,275 h (HMI counter) - Containers processed: approx. 302.5 million (HMI counter) Equipment - Infeed and outfeed starwheels - Container plates and top centring bells - Brush units and side pressing belts in the outfeed - Transparent safety doors and panels - KOSME touch panel with production statistics Condition Used, with normal signs of wear and glue residue from production. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: used, Year of construction: 2013, Overview This KOSME JETCLEAN G 16/960 1T UP is a rotary air rinser built in 2013. It cleans empty bottles and containers automatically before filling: the containers are turned upside down and blown out with filtered air through moving air nozzles, so loose particles and contamination are removed before the containers reach the filler. It suits bottlers who want a dry cleaning step for empty PET bottles ahead of filling. The containers are held in grippers on the rotating carousel and inverted for the air treatment. The machine is fully enclosed by transparent safety doors and is operated from a KOSME touch panel with production data and recipe management. It covers container formats from 400 g/ml to 2 kg at an output of up to 6,000 containers per hour; the format currently set up is a 2 L PET bottle, other formats via the available change parts. Technical data - Manufacturer: KOSME - Model: JETCLEAN G 16/960 1T UP - Year of manufacture: 2013 - Machine type: rotary rinser for empty containers, air blowing - Treatment medium: filtered air - Format range: 400 g/ml to 2 kg containers - Output: up to 6,000 containers per hour - Current format: 2 L PET bottle - Dimensions: approx. 2.5 x 2.5 m Equipment - Rotary carousel with container grippers and inverting section - Moving air nozzles for blowing out the containers Nlsdpfez Et Utsx Afusg - Transparent safety doors - KOSME touch panel with production screen and recipe management - Electrical documentation and wiring diagram Condition Used. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: used, Year of construction: 2013, Overview This KOSME DEPACK B B1F A/67-Rf is a depalletizer for empty containers such as blown bottles, built in 2013. It takes containers delivered in several layers on pallets, removes them layer by layer and transfers them to the downstream machine in the line. It handles containers from 100 to 500 ml at up to 13,000 containers per hour. Full pallets run in on pallet chain conveyors, a gantry-type depalletizing head clears the layers and removes the tier sheets. The machine is enclosed by safety fencing with light curtains and access protection. It is controlled by a Siemens PLC from a separate control cabinet outside the machine and operated from a KOSME touch panel. The machine is format-dependent, with several formats set up. Technical data - Manufacturer: KOSME - Model: DEPACK B B1F A/67-Rf - Year of manufacture: 2013 - Machine type: depalletizer for empty containers - Output: up to 13,000 containers per hour, depending on conveyor control and line integration - Container range: 100 - 500 ml - Pallet size: max. 1,300 x 1,000 mm - Pallet height: adjustable up to approx. 1,600 mm - Pallet infeed height: 630 mm, outfeed height: 680 mm - Power supply: 3 x 400 V + N, 50 Hz Nedjz Et Umjpfx Afuelg - Connected load: 27 kW, rated current 49 A - Short-circuit rating: 10 kA - Control: Siemens PLC, control cabinet IP54 - Dimensions (L x W): approx. 18.0 x 7.0 m - Weight: approx. 8 t Equipment - Pallet chain conveyors - Gantry depalletizing head - Tier sheet removal - Safety fencing with light curtains and access protection - Separate control cabinet with Siemens PLC - KOSME touch panel - Several formats set up - Operating manual and CE declaration of conformity Condition Used. The machine has been out of production since 2019 and is still connected. It can partly be moved in manual mode; automatic operation cannot be demonstrated at present. Inspection in manual mode is possible by arrangement. Availability Available immediately. Dismantling can be arranged at any time; if it has not been collected by week 43/44 of 2026, the machine will be dismantled and put into storage. Location: Germany.

Condition: used, Year of construction: 2025, Overview Nsdpfxez Eqdxe Afuolg Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens S7-1200 with a 12" Siemens HMI touch screen showing the full process mimic with zone temperatures. Year of manufacture 2025, new. Technical details - Year of manufacture: 2025, new - Capacity: 2,400 bottles/h at 500 ml, Ø 53 mm - Capacity: 1,800 bottles/h at 500 ml, Ø 70.3 mm - Capacity: 2,000 cans/h at 500 ml, Ø 66 mm - Container sizes: cans and bottles of 500 ml, 330 ml and 200 ml - Pasteurization temperature: +70 °C, 10 minutes residence time - Product temperature: +10 °C at the inlet, +37 °C at the outlet - Total production cycle: 41 minutes - Zones: 8 (3 x heating, 1 x pre-pasteurization, 1 x pasteurization, 3 x cooling) - Heating: steam, plate heat exchanger mounted on the side of the tunnel - Steam requirement: 143.6 °C at 3.6 bar, 130 kg/h in stable operation, 170 kg over the first 30 minutes at start-up - Water consumption: 0.2 to 0.3 m³/h in stable operation - Compressed air: 500 to 700 l/h at 6 bar - Total power consumption: 8 kW - Supply voltage: 400 V, 3 ph, 50 Hz; control voltage 24 V DC - Degree of protection: IP 54 - Overall dimensions: 6,500 x 2,200 x 2,200 mm (L x W x H) - Working area: 6.2 m², built from one module - Conveyor working height: 1,150 ± 50 mm - Material: AISI 304 stainless steel Equipment - U-shape tunnel, infeed and outfeed on the same end of the machine - Eight temperature zones with energy recovery between the zones - Plate heat exchanger for steam heating, mounted on the side of the tunnel - Siemens S7-1200 control system - Siemens 12" HMI touch screen with process mimic and zone temperatures - Electrical cabinet in AISI 304 stainless steel - Multi-row infeed and exit belt conveyors with Movex belt - Hinged inspection hoods over the treatment zones - Spray bars over the full tunnel length Condition and availability - New machine, year of manufacture 2025 - Available from 1 March 2027 - Location: Belgium

Condition: used, Year of construction: 2002, Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: Twin Pack - Year of manufacture: 2002 - Machine type: handle applicator for beverage multipacks - Line output: 20,000 - 30,000 bottles/h depending on format - Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l - Control: Siemens text operator panel Equipment - Handle application unit with tape reels on a blue steel frame above the pack conveyor - Control panel with separate start, stop and reset for the front and rear sections, emergency stop - Guarded enclosure with transparent doors Condition Still installed and under power. An inspection on site is possible. Availability Available from 31 October 2026. Location: Germany. Nedoz Elmhepfx Afuolg

Condition: good (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Description: For sale is a fully functional KREUZMAYR postmix container filling system, including filler, tanks, pasteurizer, and cooling unit, from the liquidation of a beverage industry production facility. Capacity: 2000 liters per hour (syrup). The system was last used in a professional beverage production facility and includes several components for the processing, pasteurization, and filling of postmix syrups. Ideal for: Nedpfx Afsz Elmbsuolg Beverage manufacturers Food production Syrup & postmix production Filling companies Components of the system: Tanks / Containers Mobile syrup tank 500 – CONTAINER KG – Year of manufacture: 2017 Mobile syrup tank 1000 – CONTAINER KG – Year of manufacture: 2017 Production & Filling Technology Postmix syrup pasteurizer (BIB & CT) – KREUZMAYR – Year of manufacture: 2017 Postmix container filler – KREUZMAYR – Year of manufacture: 2017 Cooling unit for postmix syrup – FISCHER – Year of manufacture: 2017 Details about the system: Application area: Pasteurization of postmix syrup (Bag-in-Box & Container) Condition: operational / functional Maintenance records and, if applicable, videos available Includes accessories and existing format parts Special features: Industrial quality – ready for immediate use Ideal for beverage manufacturers / fillers System can be inspected in operation on site Professional dismantling organized

Condition: used, Year of construction: 2002, Overview This SMI SK 452 T is a shrink packer for PET bottles, built in 2002 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30,000 bottles per hour. It handles 0.5 l, 0.75 l, 1.0 l and 1.5 l bottles in 3x2 packs and 0.5 l bottles in 4x3 packs, and has a pass-through mode for running bottles unpacked. The wrapping section is fully enclosed by safety guarding with viewing windows. The machine has been running as the shrink packer of a PET bottling line for water and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SMI (Italy) - Model: SK 452 T - Year of manufacture: 2002 - Machine type: shrink packer for PET bottles with integrated heating tunnel - Output: up to 30,000 bottles/hour - Pack formats: 0.5 l (3x2 and 4x3), 0.75 l (3x2), 1.0 l (3x2), 1.5 l (3x2) - Pass-through mode for unpacked bottles - Location: Germany Equipment - Multi-lane bottle infeed with lane dividers - Pack collating and film wrapping unit with film reel holder - Integrated shrink tunnel (heating oven) - Full safety enclosure with viewing windows and emergency stops Nljdpfxjz Elkyj Afujg Condition The machine is still installed and under power and in regular production. It can be visited and inspected in operation on site. Availability The machine is available from 31 October 2026. It is located in Germany.

Condition: used, Year of construction: 2019, Overview This Krones VarioFlash B is a flash pasteurization system for beer and beer mix beverages, built in 2019 by Krones AG at its Steinecker plant in Freising, Germany. It pasteurizes 20 - 45 hl/h in a three-stage plate heat exchanger with energy recovery, a heat retention tube and a cooling stage. Everything is mounted on a stainless steel skid with a horizontal 2,100 l buffer tank, and a freestanding stainless steel control cabinet with touchscreen HMI completes the system. Nljdpfsz Ekdxex Afujg Technical data - Manufacturer: Krones AG (Werk Steinecker, Freising, Germany) - Model: VarioFlash B with cooling stage - Year of manufacture: 2019 - Machine type: flash pasteurizer with plate heat exchanger - Products: beer, beer mix beverages - Capacity: 20 - 45 hl/h - Pasteurization temperature: 71 - 85 °C - Holding time: 30 s at 45 hl/h - Max. CO₂ content: 6.5 g/l - Product inlet temperature: 5 - 15 °C; product outlet temperature: 16 °C - Energy recovery: approx. 91 % - Heating requirement at 85 °C: approx. 51 kW (approx. 90 kg/h steam at 6 bar(g), 165 °C) - Cooling requirement with water circulation at 5 °C: approx. 38 kW (5 m³/h glycol water, 2 - 10 °C) - Process water: inlet pressure 4.0 bar(g), inlet temperature 6 - 15 °C - Buffer tank: 2,100 l, max. allowable pressure -1.0 / +7.0 bar, allowable temperature -4 to +98 °C, CE marked Equipment - Plate heat exchanger with 3 stages: energy recovery, pasteurization with temperature control, cooling with temperature control - Heat retention tube with fixed length; PU control depending on temperature and flow rate - Hot water circuit with separate brazed plate heat exchanger, temperature control, circulation pump and expansion vessel - Sanitary product pumps: frequency-controlled product feed pump, booster pump for a positive pressure difference towards the unpasteurized product, frequency-controlled product pump to the filler - Horizontal stainless steel buffer tank, pneumatic valves, inline instrumentation and sanitary pipework on a tubular stainless steel frame - Freestanding stainless steel control cabinet with touchscreen HMI and main switch Condition Used. The system has been removed from production and is stored indoors. It can be inspected by appointment. Availability Immediately. Location: Germany.

Condition: used, Year of construction: 1991, Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Nlsdpfx Afsz Eivyoujg Technical data - Manufacturer: H&K (Holstein und Kappert) - Model: SVF 120-D - Year of manufacture: 1991 - Machine type: rotary can filler - Filling valves: 120 - Can format: 211/202 - Output: approx. 80,000 cans/h (330 ml) - Power supply: 380 V, 50 Hz, 3/N - Rated current: 24 A - Control voltage: 24 V DC - PLC: Siemens S7-400 (CPU 416-2) Scope of delivery - Can filler SVF 120-D with 120 filling valves and can lift cylinders - Can seamer: Angelus 121 L (202), year 1991 - Can rinser operated together with this filler - Filler platform with railings - Yellow H&K control cabinets with Siemens S7-400 PLC and I/O racks - Backup of the Siemens PLC program on USB stick - Documentation: H&K operating manual and spare parts list (French), electrical diagrams, Angelus 121 L parts list and service manual Condition Used, sold as is. The machine is already dismantled and stored in Germany. Loading onto the buyer's trucks is included. Transport requires two trucks: one for the filler carousel and one for the remaining machine parts and components. Availability Immediately.

Condition: used, Year of construction: 2011, Overview Bohrer R30 crate washer, built in 2011, for returnable bottle crates. The washer is currently part of a 15,000 bottles per hour bottling line. Stainless steel tunnel housing with inspection windows, access platform with stairs over the machine and its own stainless steel control cabinet. The machine is still installed and running in a mineral water plant. Technical data - Manufacturer: Bohrer - Model: R30 Nlodpfx Afoz Eh Sgeueg - Year of manufacture: 2011 - Machine type: crate washer for returnable crates - Currently installed in a 15,000 bottles/h line - Power supply: 400 V, 50 Hz - Connected load: 20 kVA - CE marked Equipment - Stainless steel tunnel housing with inspection windows - Access platform with stairs and railings - Stainless steel control cabinet with push-button operation and emergency stop Condition Used. The machine is still installed and under power at its production site and can be inspected by appointment. Availability Immediately.

Condition: used, Year of construction: 2014, machine/vehicle number: PST39, Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordinated sequence. The 285-second holding tube provides the retention stage required for yogurt pasteurization, helping maintain consistent process exposure before the product continues through the line. Control and monitoring arrangements should be integrated with the plant process system to supervise temperature, pressure, flow and product-routing conditions.Production Line Integration CapabilitiesThis pasteurization equipment can be integrated into a dairy processing or industrial packaging line upstream of filling equipment. It is suitable for handling yogurt and pure milk within a process layout that includes product reception, preparation, heat treatment, hygienic transfer and downstream packaging. The plate heat exchanger supports efficient thermal exchange in continuous processing, while the holding section provides a dedicated pasteurization stage for yogurt production.In a used bottling line or second hand dairy production installation, equipment of this type is typically connected to hygienic product piping, process utilities and downstream buffer, filling or packaging machinery. Integration planning should consider product viscosity, cleaning procedures, piping configuration and synchronization with the selected beverage production or food-processing line.Machine Condition & Maintenance HistoryThe main Tetra Therm Lacta machine was originally released from the factory in 2014. The Tetra Plex plate heat exchanger is described as original equipment for the machine. The associated heat-exchanger data plate identifies manufacture for Tetra Pak and service by Tetra Pak, with a 2012 year shown on the plate.Operational Performance & VersatilityDesigned for dairy thermal processing, this pasteurizer supports yogurt pasteurization through its dedicated 285-second holding tube and can also be used for pure milk pasteurization through the integrated plate heat-exchange section. Continuous pasteurization systems are an important part of hygienic beverage production and industrial packaging operations where stable thermal treatment is required before filling or further processing.The Tetra Plex plate heat exchanger is engineered for product heating and coolin... Nedpfx Afez Ecmxouolg

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Nledpfxoz D Uuxj Afueg Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 Nledpfx Afez D S Sbousg - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper Njdpfx Aez D Hmmjfuslg

Condition: used, Year of construction: 2008, Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Technical data - Manufacturer: Haloila - Model: Octopus 1800 SFTS TWIN - Year of manufacture: 2008 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Operating hours: 50,408 h - Output: up to 100 pallets/h at standard overlap and 21 wraps - Pallet formats: Euro pallets and half pallets - Configuration: TWIN, two film carriages on the rotating ring - Automatic reel change (RCS): no - Top sheet unit: yes, functional and in use - Control: Siemens SIMATIC S7-300 PLC - Operator panel: Siemens SIMATIC touch panel - Communication: SIMATIC NET / PROFIBUS - Drives: Emerson / Control Techniques frequency inverters (Commander SK, Unidrive M300) - Power supply: 3 x 400 V - Max. current: 20 A - Connected load: 5.0 kW - Machine weight: approx. 2,650 kg - CE mark on the machine plate Equipment - Rotating ring with two film carriages (TWIN), film clamping and cutting on the ring - Top sheet unit for covering the pallet load before wrapping - Siemens SIMATIC S7-300 control with touch panel operation in a separate switch cabinet - Emerson / Control Techniques inverter drives - Operating manual, wiring diagrams and further technical documentation Nedjz D Aw Uopfx Afuelg The pallet conveyor is not included in the sale. Condition Used and fully functional. The machine is in production at the time of listing and has 50,408 operating hours. Maintenance was carried out regularly by the machine manufacturer. Sold without warranty. Availability From 16 October 2026. Location: Germany.

Condition: used, Year of construction: 2009, Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data - Year of manufacture: 2009 - Design: low-level infeed palletizer - Changeover: automatic, for different pallet patterns and pallet sizes - Output range: low to medium production capacities - Handled at the site: shrink-wrapped PET bottle packs - Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station - Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery - GEA Procomac Opera palletizer - Complete pallet conveyor system - Pallet magazine - Mother pallet station - Robopac stretch wrapping machine - Logopak pallet labelling system Condition Nledpfsz Dxtxsx Afusg Still installed and under power, in production until October 2026. Inspection under power by appointment. Availability From 1 October 2026. Location: Germany.

Condition: used, Year of construction: 2012, Overview Complete Krones PET line from 2012 for carbonated water in non-returnable PET bottles of 0.5 L, 1.0 L and 1.5 L, rated at 16,000 bottles/h on the 1.5 L format. The line runs from preform feeding through a blow moulder-filler-capper bloc in a clean room, beverage treatment and CIP, inspection, drying, coding and wrap-around labelling, to shrink-film packing with handle application, palletizing and stretch wrapping. A separate sleeve section with sleeve labeller, steam shrink tunnel, inspection and two dryers is included. Technical data - Year of manufacture: 2012 - Output: 16,000 bottles/h (1.5 L) - Product: carbonated water - Bottles: PET, 0.5 L, 1.0 L and 1.5 L - Labeller: up to 20,000 bottles/h - Packer, palletizer and stretch wrapper: up to 24,000 bottles/h - Packs: shrink-film packs with carry handle, 3x2 and 4x3 - Pallets: 800 x 1200 mm and 1000 x 1200 mm - Electrical: 380/220 V, 3/N/PE, 50 Hz Scope of Delivery - Preform feed unit | Krones | CONTIFEED | with tilting device for the preform hopper | 2012 - Preform interior cleaning | Krones | PREJET | 2012 - Stretch blow moulder | Krones | CONTIFORM S8 | 16,000 bottles/h (1.5 L) | 2012 - Filler-capper | Krones | MODULFILL VFS | 60 filling valves, 16,000 bottles/h (1.5 L) | 2012 - Clean room | Krones | for the blow moulder-filler-capper bloc | 2012 - Closure conveyor | Krones | 2012 - Beverage treatment | Krones | CARBOFLOW | 2012 - CIP system | Krones | VARIOCLEAN | 30 m³/h | 2012 - Container conveyors | Krones | SYNCO | 2012 - Inspection machine | Krones | CHECKMAT 707 | 2012 - Container dryer | Krones | LINADRY | 2012 - Container coding | Videojet | inkjet coder | 2012 - Labelling machine | Krones | CONTIROLL COMBI | wrap-around OPP labels, up to 20,000 bottles/h | 2012 - Inspection machine | Krones | CHECKMAT 731 | 2012 - Sleeve labeller | Krones | SLEEVEMATIC | 2017 - Steam shrink tunnel | Krones | SHRINKMAT - Inspection machine for the sleeve section | Krones | CHECKMAT - 2 container dryers for the sleeve section | Krones | LINADRY | 2017 - Pack conveyors | Krones | MULTICO | 2012 - Shrink-film packer | Krones | VARIOPAC PRO FS | 3x2 and 4x3 packs, up to 24,000 bottles/h | 2012 - Handle applicator | Krones | VARIOSTICK | 2012 - Palletizer | Krones | MODULPAL | 800 x 1200 and 1000 x 1200 mm pallets, up to 24,000 bottles/h | 2012 - Pallet conveyors | Krones | PALCO | 2012 Njdpfx Afoz Dw Uuouslg - Stretch wrapper | Robopac | 2012 - Electrical power distribution for the line | Krones | 2012 Condition Dismantled and stored. Inspection on site by appointment. Availability Available immediately. Location: Georgia.

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Nedpoz Dv Uyjfx Afuelg Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: used, Year of construction: 2017, Overview This SACMI KUBE 60 is a rotary self-adhesive labelling machine built in Italy in 2017. It carries six self-adhesive labelling stations and eighteen servo-driven bottle plates, and reaches a maximum output of 12,000 bottles per hour in its current configuration. The machine labels 750 ml glass bottles in a sparkling wine line, where it currently runs at about 5,000 bottles per hour. A LINX SL301 laser marking system is integrated for coding. Technical data - Manufacturer: SACMI - Model: KUBE 60 - Year of manufacture: 2017 - Machine type: rotary self-adhesive labeller - Maximum output: 12,000 bottles/h - Current production speed: about 5,000 bottles/h - Containers: glass bottles, 750 ml - Self-adhesive labelling stations: 6 - Bottle plates: 18, servo-driven - Electrical supply: 400 V, 3 phases + N + PE, 50 Hz - Rated current: 13 A Nledpfxoz Durwe Afusg Equipment - Six self-adhesive labelling stations with their own operator displays - Main touch-screen operator panel - LINX SL301 laser marking system for coding Condition The machine is still installed and in production and can be inspected by arrangement. Dismantling and loading are not included. Availability Available from 29 January 2027.

Condition: used, Year of construction: 2017, Overview Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data Nodpfjz Dtymjx Afuslg - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 - Electrical cabinet with power supply and automation included Scope of Delivery - Bottle washer and dryer | CAMES | WDT-12 | 2005 - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Condition: used, Year of construction: 2004, Overview This Robino & Galandrino ZENITH Z 2/16 OTTICO is a rotary capsuling machine for sparkling wine bottles, built in 2004. It places and crimps capsules onto 750 ml glass bottles, with optical spotting so that a printed capsule is aligned to the bottle before crimping. The machine is laid out as a two-turret unit: a capsule distributor turret feeding a 16-head rotary crimping turret, rated at 12,000 bottles per hour. It is still installed and under power, remains in production until end of January 2027, and can be visited in operation on request. Technical data - Manufacturer: Robino & Galandrino - Model: ZENITH Z 2/16 OTTICO - Year of manufacture: 2004 - Machine type: rotary capsuling machine for sparkling wine bottles - Configuration: 2 turrets, 16 crimping heads - Capsule spotting: optical - Capacity: 12,000 bottles per hour - Container: glass, 750 ml sparkling wine bottles - CE marked Equipment - Automatic capsule magazine with inclined slat elevator feed - Optical spotting station for pre-printed capsules - Full safety enclosure with transparent doors and emergency stops - Bottle infeed and discharge handling with star wheels and guide rails Condition Nodpfx Afjz Dtndoujlg Used - still installed and under power, in production at the current site. Availability From end of January 2027. Location: France. Sold EXW; dismantling, handling and truck loading are not included.

Condition: ready for operation (used), TETRA ALCIP 10 CIP WASHING UNIT YOM 2004 LOCATION - POLAND Njdpfx Asz Dpumjfuslg EXCELLENT CONDITION

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h Nljdpfoz Dimpsx Afuog - Container table diameter: 720 mm - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine - Installation variant: linear - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: used, Year of construction: 2009, Overview Complete PET line for sparkling mineral water and soft drinks. A SIDEL SBO 20 Universal Combi blows, fills and caps up to 30,000 bottles per hour in one block; Krones labelling, shrink packing and palletising complete the line down to the finished pallet. The Combi was built in 2005 and started production in 2006. The Combi stands in Belgium, the downstream machines in Germany. All machines are still installed and can be inspected by appointment. Technical data - Output: up to 30,000 bph (maximum filler speed), 28,000 bph in current production - Containers: 1.0 l, 1.25 l and 1.5 l PET bottles - Products: sparkling mineral water and flavoured sparkling water with high CO2 content - Neck finish: 26/22 GME 30.40 - Preforms processed: rPET Luxpet - Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l (86 mm diameter, 326 mm height) - Blow moulds are not included Nedpoz Dih Hjfx Afuslg Scope of Delivery - PET Blow Moulder | SIDEL | SBO 20 UNIVERSAL | 20 mould stations, linear oven with 24 heating modules, preform feeder, PCC drive, transfer to the filler | 2005 - Isobaric Filler | SIDEL Simonazzi | SELEC 515 FMG 120-15C | 120 filling valves, pitch 113 mm | 2005 - Capper | Zalkin | HYSTERESIS H6 | 15 heads, quick change of the chucks, cap type 26/22 | 2005 - Cap Feeder | SIDEL Gebo | For flap cap 28 and 26/22, 42,000 bph | 2005 - Carbo-Mixer | SIDEL | CARBO-L-D 580/60 | Double-stage deaeration including PFM inline flavour dosing 45 m³/h, max. 60,000 l/h | 2005 - Bottle Conveyor | Single-lane conveyor at the Combi exit - Container Conveyors | SYNCO S | Ground floor and platform level - Fill Level Inspection | Krones | CHECKMAT 731 FM-X+L | 2009 - Inkjet Coders | Domino | DDC 3 | Best-before date coding, two coders - Drying System | Europool | FM TF-02 - Labelling Machine | Krones | CONTIROLL HS 720-15 | Wrap-around labels from the reel | 2009 - Label Inspection | Krones | CHECKMAT 731 EM | 2009 - Tray and Shrink Wrapper | Krones | VARIOPAC PRO FS | 2009 - Tray Coding System | WOLF - Tray Transport System | MULTICO S - Palletiser | Krones | MODULPAL 1A | 2009 - Pallet Transport System | PALCO S Condition The Combi is in good working condition and in production; it is maintained annually by the in-house team and, where required, by SIDEL. Its driving panels and computer, electrical and mechanical drawings, manuals, spare parts books and all available spare and format parts are included. The equipment is sold as it stands and is to be dismantled. Availability The Combi runs until 27 November 2026; dismantling is planned for week 49/2026. The line is available from December 2026.

Condition: repair required (used), Used aseptic machine for producing beverages in cartons. Manufacturer: TETRA PAK Nlodpfx Afjz Dg D Sjujg Model: AB3-1000 Aseptik Maximum output: 3650 packages/hour Main motor: 2.2 kW Technical condition: used machine, not inspected, requires technical inspection or repair.