Adel e.K.

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) Prsdpe Agvw Nefx Adxsc *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 7,051 h, load capacity: 2,500 kg, lifting height: 4,650 mm, free lift: 1,550 mm, fuel type: gas, mast type: triplex, construction height: 2,150 mm, motor manufacturer: Toyota, fork length: 1,350 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 7.00 - 12, rear tire type: superelastic tires (black), rear tire size: 6.00 - 9, overall weight: 4,390 kg, total height: 2,150 mm, total length: 2,650 mm, total width: 1,150 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, TOYOTA 02-8 FGF-25 – LPG forklifts TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 4.650 mm Closed height: 2.150 mm Free lift: 1.550 mm Mast: Triplex (3F465) Fork length: 1.350 mm Fork carriage: 2 A Drive: 4-Zyl. Treibgas Engine: Toyota Tyres: Superelastik SE 7.00 - %) / 6.00 - 9 %) Service weight: 4.390 kg Length: 2.650 mm Predo Agvw Espfx Adxoc Width: 1.150 mm Year of manufacture: 2016 Operating hours: 7.051 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift Internal no.: 02076 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2024, Year: 2024 Podpfx Aj Agvwwodxorc Condition: very good Technical specification: - Supported Paper Width: 7.086" to 13.385" (180mm to 340mm) - Supported Paper Length: 10.984" to 27.952" (279mm to 710mm) - Media Thickness: 0.14mm (140 micron) to 0.35mm (350 micron) - Feeder Capacity: 4.13" stacker height (up to 1,000 sheets based on 80gsm) - Media Alignment: Self-centering lockable guides - Dual Tool Holder: Yes - Blade Holder (included): Holds cutting blades; 30º, 45º or 60º for range of media types - Creasing Tool (included): Dual ended (wide & narrow) suitable for ≤350 micron card - Calibration Pen (included): Plotting pen used for auto-calibration. Can be used in either mountable location - Cutting Force: Max. 7.60 N (750 gf) delivered in 190 programmable steps - Maximum Speed: 1,060mm/s (41.73"/s) - Mechanical / Programme Resolution: 0.01254mm / HPGL 0.025mm - Registration System: Vision3 High Resolution CCD Vision System - Cut Position Accuracy: +/- 100 microns - Auto Job Recognition: Yes; instant cut file retrieval with QR code job recognition - Power Supply: 100-240V, 50/60Hz, 100W Average (320W peak) - Dimensions: 32.3"W x 33.46"D x 48.43"H - Max Area Required In Use: 32.3" x 51" x 48.43" - Weight: 300lbs - Compatible Standards: Complies with CE and RoHS Directive - Connectivity: USB, Ethernet LAN - ColorCut Pro Software (Included): Sends projects designed in Adobe Illustrator o - CorelDRAW directly to cutter, adds registration marks and QR codes The Intec ColorCut SC6500 is a revolutionary digital die-cutter and creaser, blending flatbed and sheet fed technology for a fully automated cutter and creaser that will cut and crease any shape on media up to 350 microns thick at speeds up to 1,060mm/s. Targeted for users seeking an affordable, compact, high-capacity cutting solution the SC6500 combines ultra-reliable feeding with an instant job retrieval system and flawless high-speed cutting and creasing for complete unattended production. Choose between DIRECT mode (using computer) or HELD mode for standalone operation with USB drive, enabling wireless remote cutting. The ColorCut SC6500 comes equipped with Dual Tool holder for seamlessly cutting and creasing in one pass, as well as industry-leading ColorCut Pro production software, which enables the operator to use Adobe Illustrator or CoreDRAW to easily generate cut files from the artwork. This machine has been designed to provide unattended operation with particular attention paid to the feeding system to ensure class leading performance for card, vinyl labels or even tricky laminated sheets. A revolutionary suction feed belt system, combines with air blades to separate the top sheet for each feed – and the jogging back wedge ensures any stray media is kept under control. Feed continually from the 1,000-sheet stacker with confidence. Using the Vision3 CCD video camera within the tool head, the SC6500 quickly scans SmartMark registration marks created using the ColorCut Pro software to adjust for scale, skew and rotation, automatically adapting your cut lines to fit your job. Additionally, when creating jobs, ColorCut Pro can apply an auto-assigned (editable) QR code to each design, allowing for automatic cut file retrieval for running any number of mixed jobs in the same stack. We highly recommend the Intec ColorCut SC6500 to anyone looking for a commercial-grade digital die-cutting solution with an entry-level price point. This user-friendly, compact machine is perfect for copy shops, schools...

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MTK Series are mobile type & closed circuit crushing and screening plant known as also sand making machine that is used for high percentage of cubical shape sand production purpose by processing soft and medium hard materials such as limestone, gypsum etc. MTK Series includes one stage of crushing process that is made by a tertiary impact crusher which is capable to produce high percentage of sand with good cubical shape. TECHNICAL SPECIFICATIONS: -Bunker: 10 m3 -Plant Dimensions: 17000x4500x3900 mm -Production Capacity: 200-300 Tons Per Hour -Crusher Type & Rotor Size: Tertiary Impact Crusher – 1200x1300 mm -Maximum Feeding Size: 120 mm -Vibrating Screen Size and Deck: 2000x5000 mm 3 decks -Total Motor Power: 365 Kw -Generator (optional): 500 kvA MTK-130 IS A COMBINATION OF: • Hopper • Vibrating Feeder • Tertiary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System Pjdj Agvwtspfx Adxsrc • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CCS-440 Capacity: 300-550 t/h Prsdpfx Ado Agvwhsxec Max. Feed opening; EC 450 mm C 400 mm MC 300 mm Motor: 220-250 kW, Head diameter: 1300 mm Dimensions (width * height): 3100 *2850 mm Countershaft Speed-rpm: 750-1200 Weight: 31000 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 4000000783, functionality: fully functional, input voltage: 400 V, input current: 3 A, input frequency: 50 Hz, type of input current: AC, volume flow: 1,200 m³/h, suction capacity: 1,200 m³/h, intake manifold diameter: 150 mm, noise level: 75 dB, actuation type: electric, total height: 620 mm, total length: 1,450 mm, total width: 620 mm, overall weight: 130 kg, year of last overhaul: 2026, Equipment: CE marking, Fully serviced and inspected dust extraction system. Ready for immediate use. Pjdpfx Ao Agvwasdxjrc

Condition: used, mileage: 610,815 km, power: 309 kW (420.12 HP), first registration: 06/2006, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: other, total length: 5,900 mm, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, cruise control, electric window regulation, fridge, power assisted steering, second fuel tank, spoiler, = Additional options and accessories = - Aluminum fuel tank - High Beams - Immobilizer - Roof Spoiler - Sleeping cabin - Sun visor = More information = Year of construction: 2006 Tyre size: 315/80 R22.5 Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Empty weight: 7.350 kg Carrying capacity: 10.650 kg GVW: 18.000 kg Prodps Agvv Isfx Adxec Number of keys: 2

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, CNC Universal – Machining Center DECKEL MAHO DMU 95 monoBlock NEW DMG Design With Heidenhain TNC 640 path control Year of manufacture: 2024 Travel ranges: X 950 Y 850 Z 650 Spindle speed range: 0 – 20000 rpm, stepless (HSK 63) With the following accessories: NC rotary table, 1000 mm x 750 mm clamping surface 3D measuring probe, Heidenhain TS 460 Vertical tool changer with 120 magazine slots (HSK 63) Tool breakage monitoring Chip flushing in the work area door Chip flushing gun with pump, 1 bar/40 l min Blow-off air at the spindle center Accuracy package Application Tuning Cycle MPC Machine Protection Control Psdpfxo Agvvys Adxorc Net Service App, Service Agent Operating mode 3 + 4 Electronic handwheel IKZ 40 bar with paper band filter Chip conveyor Rotoclear Coolant system Spindle oil cooler Oil mist extraction 3-piece height-adjustable machine feet Control cabinet cooler (Rittal) Operating manuals THE MACHINE IS IN EXCELLENT CONDITION.

Condition: like new (used), functionality: fully functional, input voltage: 240 V, type of input current: DC, Excellent condition slicer, single-phase 240V electrical connection, all plastic parts are undamaged. We speak English, German, and languages of the former Yugoslavia. Contact is also possible via WhatsApp. Prods Agvvvopfx Adxsc

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CC200 Capacity: 200-250 t/h Max. Feed opening: EC 185 mm C 145 mm MC 115 mm M 90 mm MF 75 mm F 50 mm EF 35 mm Prodpe Agvvrjfx Adxjc Motor: 132 kW Head diameter: 1100 mm Dimensions (width * height): 2520* 2540 mm Countershaft Speed-rpm: 750-1200 Weight: 11230 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2018, operating hours: 3,843 h, functionality: fully functional, machine/vehicle number: 320000620, turning length: 1,240 mm, turning diameter over cross slide: 480 mm, turning diameter: 480 mm, spindle motor power: 33,000 W, spindle speed (max.): 3,250 rpm, spindle bore: 115 mm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, mount diameter: 315 mm, rotational speed (max.): 3,250 rpm, rotational speed (min.): 20 rpm, torque: 630 Nm, bar passage: 102 mm, workpiece weight (max.): 150 kg, feed rate X-axis: 30 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 36 m/min, total height: 2,150 mm, total length: 4,800 mm, chuck outer diameter: 315 mm, total width: 2,100 mm, collet bore: 102 mm, bar diameter (max.): 102 mm, quill stroke: 120 mm, quill diameter: 100 mm, quill travel distance: 1,200 mm, swing diameter over cross slide: 480 mm, spindle nose: A2-8, swing diameter over bed slide: 700 mm, overall weight: 7,200 kg, spindle diameter: 140 mm, tool length: 250 mm, feed force X-axis: 7,000 N, feed force Y-axis: 7,000 N, feed force Z-axis: 11,000 N, turning diameter over bed slide: 700 mm, Equipment: rotational speed infinitely variable, For Sale: DMG MORI CLX 550 CNC Lathe (Model 2018) High-performance 4-axis turning center in excellent condition, ideal for heavy-duty and precision machining. Equipped with key factory options for maximum efficiency and versatility. Control System & Software: CNC Control: DMG MORI SLIMline® 19" Touch Control with Siemens 840D sl Operate Software Option: Integrated DXF Reader for fast, direct import and programming of 2D CAD files Key Technical Specifications & Features: Year of Manufacture: 2018 Control Unit: 4-Axis Configuration Bar Passage / Capacity: Extended Ø 102 mm passage option Spindle Speed: Up to 3,250 rpm Spindle Torque: 630 Nm (40% ED) Turning Capacity: Max. turning diameter Ø 480 mm | Max. turning length 1,240 mm | Swing over bed Ø 700 mm Tailstock Setup: Includes base and hydraulic interface preparation for steady rest Included Accessories & Tooling Package: Prede Agvvgspfx Adxsc Tool Setter (Automatic tool measuring probe) Part Catcher & Bar Puller Bar Feeder Interface / Preparation Driven Tooling Included: 1x Angular Driven Tool Holder (90°) 4x Straight Driven Tool Holders Collet Chucks: 2x ER32 & 2x ER40 Clean, well-maintained machine ready for immediate production.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE PDK Series Primary impact crusher is a rotor type crusher and an expert in crushing less abrasive materials with medium hardness with very high reduction and cubical ratio. Primary impact crushers can be preferred for crushing large sized stones and it lowers secondary crushing requirement in entire systems. PDK series impact crushers deliver unbeatable performances in primary, secondary and tertiary applications. The crusher consists of two parts, body opening and adjustment systems operate easily with the hydraulic power unit thus provides an advantage for easy maintenance and minimum stopping for a constantly work. We produce PDK crushers as Mobile Primary Impact Crusher and Stationary Primary Impact Crusher. General Specifitions and Futures: • High capacity • High reduction ratio • Wear surfaces are protected by solid-filler electrode welding • Hammers and crushing plates are manufactured from high manganese steel casting • Inner surfaces of the crusher is coated with wear resistant lining plates • Wide intake with chain curtain due to protection from back-leaping •Hydraulic setting system Prsdpfs Agvu Uox Adxjc TECHNICAL SPECIFICATIONS • Model: FABO PDK-100 • Type: Primary Impact Crusher • Rotor Size: 1200 x 1000 mm • Max Feeding: 600 mm • Capacity: 150-200 TPH • Motor Power: Heavy duty GAMAK,200 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 15900 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 1998, control type: CNC control, actuation type: hydraulic, controller manufacturer: BC-100, number of rollers: 3, shaft diameter: 105 mm, pipe diameter (max.): 105 mm, overall weight: 1,600 kg, total length: 1,600 mm, total width: 1,200 mm, total height: 1,300 mm, Equipment: emergency stop, Profile bending machine PBT Indumasch - 25 BC-100 MACH-ID 9877 Make: PBT Indumasch Type: 25 BC-100 Control: BC-100 Horizontal and vertical:Horizontal Shaft Ø: 105mm Number of rolls: 3 Stroke X-Axis: 265mm Capacity flat: 120 x 15mm Capacity Tube: 114 x 5Ø x mm Working speed: 0-5mm/min. Adjustment siderolls: 350 Force upperroll: 27 t Control: 4285H Side supports: yes Podpj Agvu Refx Adxsrc Length: 1600mm Width: 1200mm Height: 1300mm Weight: 1600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2016, condition: like new (used), Vacuum brazing furnace, very little use, in excellent condition, like new. Brazing and chamber dimensions: 650 x 450. See the picture. We speak English, German, and languages of the former Yugoslavia. Contact is also possible via WhatsApp. Prjds Agvu Hspfx Adxsc

Condition: good (used), Technical data for the pallet racking beam: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x Pallet racking beam, used Material color: RAL 2004 orange Box profile: 100 x 50 mm Beam type: PNB 0480 Agraffe: 4 HK (hooks) Clear width: approx. 2,700 mm Max. load per beam pair: 1,500 kg with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Prjdpfe Agvu Asx Adxsc General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2019, operating hours: 7,000 h, Hyundai Wia HD2600Y CNC lathe with Y-axis Fanuc I series with Manual Guide 250mm chuck 81mm spindle bore • Maximum turning diameter: Ø300 mm (11.8″) • Maximum turning length: 610 mm (24″) • Chuck size: Standard 10″ • X-axis travel: 215 mm • Y-axis travel: 110 mm (± 55 mm) • Z-axis travel: 680 mm • BMT 55 turret for 12 tools -Measuring probe -Part catcher -Tailstock -Documentation Psdpfx Ao Agvuxsdxjrc -Chip conveyor included -2 powered tool holders (1 angled, 1 straight)

Condition: used, Used TriumphPH 400 three-phase woodworking machine combination Used Triumph PH 400 three-phase. Planer tables are 204 cm long and 400 cm wide. Podpfxe Agvuqo Adxjrc The planer cutterblock consists of three knives. The machine is in a three-phase version with a 4 horsepower motor each, with the spindle motor starting in star and delta configuration. The cast iron miter gauge table measures 240 cm x 110 cm, with an adjustable bevel gauge from 0 to 45°. The planer table thickness allows for a maximum thickness of 23 cm. The cast iron table of the mortiser is 57 cm x 30 cm, while the cast iron table of the spindle saw is 110 cm wide and 34 cm long. The maximum blade diameter that can be mounted is 315 mm. Internal spindle housing diameter is 280 mm. Spindle arbor diameter is 270 mm. The planer and saw motors start in star and delta configuration; the spindle motor has two speeds.

Condition: used, mileage: 309,000 km, power: 375 kW (509.86 HP), first registration: 03/2020, fuel type: diesel, empty load weight: 11,750 kg, maximum load weight: 14,250 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, crane, cruise control, differential lock, navigation system, onboard computer, parking heater, soot filter, Mercedes-Benz Actros MP5 2551 6x2 semi-trailer tractor with Fassi crane First registration: .000 km, with documentation 510 hp engine with 12,809 cm³ displacement Euro 6 emission class Gigaspace cab Mercedes PowerShift automatic transmission Pedj Agvtzepfx Adxorc Retarder Air conditioning, auxiliary heater Lane keeping assist Distance control cruise control Xenon headlights Mirror Cam 6x2 drive Suspension: leaf spring/air 3rd axle can be lifted Tires 385/55 R22.5, tread depth approx. 70% on aluminum rims Tires 315/70 R22.5, tread depth approx. 70% on aluminum rims Wheelbase 3600 mm Vehicle length 7100 mm Unladen weight 11,750 kg Crane: Fassi F185A.2.24 Year of manufacture: 2019 Radio remote control 2-point support 4 hydraulic outriggers 2.45 m / 5500 kg 4.60 m / 3650 kg 6.45 m / 2470 kg 8.40 m / 1800 kg 10.45 m / 1400 kg 12.55 m / 1100 kg Hook height approx. 16.50 meters The vehicle is from the first owner and is in very good condition. New TÜV (German vehicle inspection). Export/net price: 95,900 Euros All information without guarantee, errors and omissions excepted.

Condition: used, mileage: 309,000 km, power: 375 kW (509.86 HP), first registration: 03/2020, fuel type: diesel, empty load weight: 11,750 kg, maximum load weight: 14,250 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, Mercedes-Benz Actros MP5 2551 6x2 semi-trailer tractor unit with Fassi crane. First registration: 0,000 km, with supporting documentation. 510 hp engine with 12,809 cc displacement. Euro 6 emission class. Gigaspace cab. Mercedes PowerShift automatic transmission. Retarder. Air conditioning, auxiliary heater. Lane keeping assist. Adaptive cruise control. Xenon headlights. Mirror Cam. 6x2 drive. Leaf/air suspension. Prodpfx As Agvt Eodxec Liftable third axle. Tires 385/55 R22.5, approximately 70% tread, on aluminum rims. Tires 315/70 R22.5, approximately 70% tread, on aluminum rims. Wheelbase 3600 mm. Vehicle length 7100 mm. Unladen weight 11,750 kg. Crane: Fassi F185A.2.24 Year of manufacture: 2019 Radio remote control. 2-point support. 4 hydraulic extensions. 2.45 m / 5500 kg 4.60 m / 3650 kg 6.45 m / 2470 kg 8.40 m / 1800 kg 10.45 m / 1400 kg 12.55 m / 1100 kg Hook height approximately 16.50 meters. The vehicle is from a single owner and is in very good condition. New TÜV (German vehicle inspection). Export/net price: 95,900 euros. All information is subject to change without notice; errors and omissions excepted.

Condition: used, mileage: 266,500 km, power: 132 kW (179.47 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 3,810 kg, maximum load weight: 3,390 kg, overall weight: 7,200 kg, axle configuration: 4x2, wheelbase: 3,400 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 6 m³, loading space length: 7,300 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Iveco Daily 70-180 SZM with crane and 1-axle trailer First registration: .500 km, documented short cab with 3 seats Euro 6 emission class manual transmission air suspension on rear axle air conditioning wheelbase 3400 mm tires 225/75 R16, tread approx. 60% permissible total weight in combination with trailer 10,700 kg permissible gross vehicle weight 7,200 kg unladen weight 3,810 kg Crane HMF 710 K2 Year of manufacture: radio remote control 2-point support 2 hydraulic extensions 3.60 m / 1685 kg 5.30 m / 1115 kg 7.10 m / 820 kg hook height approx. 10 meters 1-axle Beck trailer First registration: air suspension tires 245/70 R17.5, tread approx. 50% flatbed: 7300 mm x 2350 mm x 400 mm permissible gross vehicle weight 6900 kg unladen weight 1870 kg Psdpfxo Agvt Ns Adxsrc German vehicle, first owner, in good condition. export / net price: 44,900 Euro All information is without guarantee, errors and omissions excepted.

Condition: used, mileage: 266,500 km, power: 132 kW (179.47 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 3,810 kg, maximum load weight: 3,390 kg, overall weight: 7,200 kg, axle configuration: 4x2, wheelbase: 3,400 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 6 m³, loading space length: 7,300 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Iveco Daily 70-180 SZM with crane and 1-axle trailer First registration: .500 km, documented short cab with 3 seats Euro 6 emission class manual transmission air suspension on rear axle air conditioning wheelbase 3400 mm Predpfx Ao Agvt Tsdxoc tires 225/75 R16, tread approx. 60% permissible total weight in combination with trailer 10,700 kg permissible gross vehicle weight 7,200 kg unladen weight 3,810 kg Crane HMF 710 K2 Year of manufacture: radio remote control 2-point support 2 hydraulic extensions 3.60 m / 1685 kg 5.30 m / 1115 kg 7.10 m / 820 kg hook height approx. 10 meters 1-axle Beck trailer First registration: air suspension tires 245/70 R17.5, tread approx. 50% flatbed: 7300 mm x 2350 mm x 400 mm permissible gross vehicle weight 6900 kg unladen weight 1870 kg German vehicle, first owner, in good condition. export / net price: 44,900 Euro All information is without guarantee, errors and omissions excepted.

Condition: used, mileage: 266,500 km, power: 132 kW (179.47 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 3,810 kg, maximum load weight: 3,390 kg, overall weight: 7,200 kg, axle configuration: 4x2, wheelbase: 3,400 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 6 m³, loading space length: 7,300 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Iveco Daily 70-180 SZM with crane and 1-axle trailer First registration: .500 km, documented short cab with 3 seats Euro 6 emission class manual transmission air suspension on rear axle air conditioning wheelbase 3400 mm tires 225/75 R16, tread approx. 60% permissible total weight in combination with trailer 10,700 kg permissible gross vehicle weight 7,200 kg unladen weight 3,810 kg Psdpfxs Agvubs Adxjrc Crane HMF 710 K2 Year of manufacture: radio remote control 2-point support 2 hydraulic extensions 3.60 m / 1685 kg 5.30 m / 1115 kg 7.10 m / 820 kg hook height approx. 10 meters 1-axle Beck trailer First registration: air suspension tires 245/70 R17.5, tread approx. 50% flatbed: 7300 mm x 2350 mm x 400 mm permissible gross vehicle weight 6900 kg unladen weight 1870 kg German vehicle, first owner, in good condition. export / net price: 44,900 Euro All information is without guarantee, errors and omissions excepted.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor Prede Agvtpjpfx Adxsc • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Podpfx Ads Agvtajxsrc Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 1980, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,350 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 1,200 rpm, number of axes: 5, This 5-axis FERMAT WHN 13.8 CNC was manufactured in 1980 and overhauled in 2008. It features a generous X-axis travel of 3,500 mm, Y-axis travel of 2,000 mm, and Z-axis travel of 1,250 mm. The machine includes a robust table size of 2,200 x 1,800 mm and can handle a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality machining capabilities, consider the FERMAT WHN 13.8 CNC horizontal machining centre. Contact us for further details. Predpfo Agvr Ssx Adxec - Original Year of Manufacture: 1980 - Overhaul / Modernization Year: 2008 (by FERMAT CZ s.r.o.) - Heidenhain main drive module for Y-axis renewed in 2026- CNC Control: Heidenhain iTNC 530 (with installed Service Pack and electronic handwheel) - Controlled Axes: 5 axes (X, Y, Z, W, and B)- Travel W-Axis (Spindle stroke): 800 mm - B-Axis: NC rotary table (360°) - Table Dimensions: 2,200 x 1,800 mm - Max. Workpiece Weight on Table: 12,000 kg - T-Slots: 11 slots; 24 H7; 160 mm pitch - Spindle Diameter: 130 mm - Tool Taper: ISO 50 - Spindle Speed Range: 5 to 1,200 rpm - Main Drive Power: 37 kW - Rapid Traverse: 6,000 mm/min - Positioning Accuracy: ± 0.02 mm - Installed Power Capacity: 50 kVA - Machine Dimensions: approx. 7,800 x 7,200 x 4,900 mm - Footprint / Ceiling Clearance: approx. 50 m² floor space; required installation height 6,300 mm - Machine Weight: approx. 38,000 kg - Included Equipment & Features: Chip conveyor system, separate electrical control cabinet, hydraulic supply unit, technical documentation and operating manual (Version Breuer 060412)