Sc Silva Logistic Srl

Condition: excellent (used), Year of construction: 2008, DEMAG SYSTEM 800/1120-9500 injection molding machine + DEMAG ERGOTECH DR743 robot Year of manufacture: 2008 | Clamping force: 800 tons | Demag Ergotech DR743 linear robot Hydraulic Demag System 800/1120-9500 injection molding machine from 2008, equipped with an integrated Demag Ergotech DR743 linear robot for automatic part removal. TECHNICAL SPECIFICATIONS 1. BASIC DATA Manufacturer: Demag Model: System 800/1120-9500 Year of manufacture: 2008 Machine type: hydraulic injection molding machine for processing thermoplastic materials Clamping force: 8000 kN (800 tons) Injection unit: 9500 Equipment: integrated Demag Ergotech DR743 linear robot 2. CLAMPING UNIT Clamping force: 8000 kN (800 tons) Dimensions of mounting plates: 1620 × 1500 mm Column spacing: 1120 × 1000 mm Minimum mold height: 500 mm Maximum mold height: 1050 mm Maximum distance between plates: 2080 mm Mold opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mold weight: 7200 kg 3. INJECTION UNIT Injection unit type: 9500 Screw diameter: 130 mm Injection volume: 7300 cm³ Injection weight (PS): 6640 g Injection pressure: 1300 bar Screw length-to-diameter ratio (L/D): 20:1 4. DEMAG ERGOTECH DR743 LINEAR ROBOT Identification data Manufacturer: Demag Ergotech Model: DR743 Type: DR743-42141000 Year of manufacture: 2008 Serial number: W743-0277 Robot type: linear, designed for automatic part removal Integration with injection molding machine: yes Robot travel ranges X-axis: 1200 mm Y-axis: 2600 mm Z-axis: 3000 mm Electrical and mechanical parameters Supply voltage: 400 V Rated current: 18 A Connected power: 12.5 kVA Robot weight: 750 kg 5. HYDRAULIC AND ELECTRICAL SYSTEM Pump motor power: 110 kW Heater power: 79 kW Nwodpfx Aao Af Nhfetjn Hydraulic oil tank capacity: 1300 l 6. MACHINE DIMENSIONS AND WEIGHT Length: 12,300 mm Width: 2700 mm Height: 2700 mm Main unit weight: 33,500 kg Accessory weight: 9700 kg Total weight of main unit and accessories: 43,200 kg

Condition: excellent (used), Year of construction: 2007, KRAUSSMAFFEI KM 800-12000 MX Injection Molding Machine - Year of manufacture: 2007 - Machine serial number: 61009705 - Clamping force: 8,000 kN (800 tons) - Machine type: hydraulic, two-platen injection molding machine - Control system: KraussMaffei MC5 2. Clamping System - Clamping system: hydraulic-mechanical, two-platen - Design: 4 pressure pads and 4 locking units on the moving platen - Clamping force: 8,000 kN (800 tons) - Dimensions of mounting platens (H × V): 1,600 × 1,530 mm - Column spacing (H × V): 1,120 × 1,000 mm - Minimum mold height: 500 mm - Maximum mold height: 1,100 mm - Maximum opening stroke: 2,600 mm 3. Plasticizing System - Complete plasticizing system for thermoplastics - Injection unit: 12000 - Screw diameter: 135 mm - Check valve: yes - Nozzle: open - Injection unit adjustment: PV 4. Injection Unit - Screw diameter: 135 mm - Injection volume: 8,588 cm³ - Injection shot weight: 7,815 g - Maximum injection pressure: 1,389 bar 5. Hydraulic and Electrical System - Rated power of pump motor: 132 kW Nsdpfx Ao Af Ib Uoatswn - Heater power: 90 kW - Operating voltage: 380 V - Power supply: three-phase - Frequency: 50 Hz - Rated current of circuit 1: 255 A - Rated current of circuit 2: 318 A - Main fuse for circuit 1: 315 A - Main fuse for circuit 2: 400 A 6. Control System - KraussMaffei MC5 control system - Color operator monitor - Integrated control panel - USB data carrier support - Adjustment of injection process parameters 7. Machine Dimensions and Weight - Length: 11,720 mm - Width: 2,920 mm - Height: 2,650 mm - Net weight including control cabinet: approximately 50,000 kg (50 tons)

Condition: excellent (used), Year of construction: 2011, KRAUSSMAFFEI KM 850-12000 MX injection molding machine Year of manufacture: 2011 Clamping force: 8,500 kN (850 tons) Control system: MC5 Robot: KraussMaffei LRX 500 TECHNICAL SPECIFICATIONS 1. Clamping unit - Clamping system: hydraulic-mechanical, two-platen - Design: 4 pressure pads and 4 locking units on the moving platen - Clamping force: 8,500 kN (850 tons) - Opening force: 560 kN - Column spacing (H × V): 1,140 × 1,140 mm - Dimensions of mounting platens: 1,600 × 1,600 mm - Opening stroke: 1,600 mm - Minimum mold height: 500 mm - Maximum mold height: 1,100 mm - Maximum die opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN 2. Plastification unit - Complete plastification unit for thermoplastics - Screw diameter: 135 mm - Backflow valve: yes - Nozzle type: open - Nozzle radius: 25 mm - Nozzle orifice diameter: 9 mm 3. Injection unit - Injection unit type: 12000 - Injection unit adjustment: PV - Screw diameter: 135 mm - Injection volume: 8,588 cm³ - Injection shot weight (PS): 6,098 g - Maximum injection pressure: 1,389 bar - Injection rate: 1,414 cm³/s 4. Hydraulic and drive system - Rated motor power: 132 kW - Hydraulic oil tank capacity: 2,440 l - Cycle time according to EUROMAP 6: 965 cycles/h 5. Control system - Control system: KraussMaffei MC5 - Color operator monitor - Integrated control panel - USB port for data carrier operation 6. KraussMaffei LRX 500 linear robot - Manufacturer: KraussMaffei - Model: LRX 500 - Type: linear robot - Z-axis: 4,000 mm - X-axis: 1,500 mm - Y-axis: 1,250 / 1,250 mm 7. Machine dimensions and weight - Length: 11,720 mm Nwodpfx Aaj Af H Imjten - Width: 2,920 mm - Height: 2,710 mm - Net weight including control cabinet: approximately 49,000 kg (49 tons) Additional equipment - KraussMaffei LRX 500 linear robot - Two-platen hydraulic-mechanical clamping system - MC5 control system - PV adjustment of the injection unit - Plastification unit for thermoplastics with a 135 mm screw

Condition: excellent (used), Year of construction: 2007, KraussMaffei KM 950-17200 MX injection molding machine Year of manufacture: 2007 Clamping force increased to 1,000 tons (10,000 kN) TECHNICAL SPECIFICATIONS 1. Clamping unit - Clamping system: fully hydraulic - Clamping force: 10,000 kN (1,000 tons) – increased from the factory standard of 950 tons - Opening force: 665 kN - Column spacing (H × V): 1,400 × 1,150 mm - Dimensions of mounting plates: 1,960 × 1,710 mm Nedpfxo Af Hxxs Aatjwn - Opening stroke: 1,900 mm - Minimum mold height: 500 mm - Maximum mold height: 1,200 mm - Maximum mold opening: 2,400 mm - Ejector stroke: 300 mm 2. Plasticizing unit - Complete plasticizing unit for thermoplastics - High-performance HPS-UN screw - Screw diameter: 120 mm - Nozzle radius: 30 mm - Nozzle orifice diameter: 12 mm 3. Injection unit - Screw diameter: 120 mm - Injection weight (HDPE): 5,420 g - Injection volume: 7,634 cm³ - Specific injection pressure: 2,257 bar 4. Control system - Control system based on an industrial computer - Integrated operator panel - Color touchscreen 5. Machine dimensions and weight - Length: 12,770 mm - Width: 3,420 mm - Height: 2,750 mm - Total weight: 61,500 kg (61.5 tons)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Horizontal column spacing: 1,025 mm Vertical column spacing: 930 mm Tool height: min. 450 mm Tool height: max. 950 mm Opening stroke: max. 1,800 mm Injection Unit Nwjdpfe Afw Hyex Aatjn Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of the pump motor: 55 kW Heating capacity: 62 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,300 x 2,500 x 2,330 mm Machine weight: approx. 33,000 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 95,744 h, clamping force: 6,000 kN, overall weight: 10,000 kg, This Engel duo 4550/600 pico was manufactured in 2009. It features a clamping force of 6000 kN and a weight of 10,000 kg. With 95,744 operating hours, this machine is designed for efficient hydraulic injection moulding. If you are looking to get high-quality moulding capabilities, consider the Engel duo 4550/600 pico machine we have for sale. Contact us for further details. Nwodpfx Ao Afw A Isaten • Clamping unit issue reported (clamping defect); estimated repair cost approx. €7,000

Condition: used, Year of construction: 2000, screw diameter: 95 mm, clearance between the columns: 1,000,900 mm, injection pressure: 1,832 bar, injection weight: 2,550 g, mold height (min.): 450 mm, ejector force: 138,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, total length: 10,100 mm, total width: 2,500 mm, total height: 2,600 mm, overall weight: 33,200 kg, Demag Ergotech 650/1000-5200 system Year of manufacture: 2000 Control system: NC4 Injection unit 5200 - Screw diameter: 95 mm - Specific injection pressure: 1832 bar - Injection volume: 2835 ccm - Injection shot weight: 2550 g - Pump motor power: 74 kW - Cylinder heater power: 43 kW - Screw L/D ratio: 20 Mold closing unit 6500 - Clamping force: 650 t - Mold plate dimensions: 1450 x 1350 mm - Distance between tie bars: 1000 x 900 mm - Ejector force: 138 kN - Mold height: 450 mm - Opening stroke: 930 mm - Maximum mold plate distance: 1880 mm - Ejector stroke: 300 mm Electrical connection (fuse): 1300 A Weight: 33200 kg Dimensions (m) length x width x height: 10.1 x 2.5 x 2.6 m Equipment: - NC4 control system with color screen - Screw Ø 95 mm, L/D 20 - Injection, holding, and packing pressure adjustable by servo valve - Core pull system with 4 circuits on proportional valves on the moving platen - Hot runner control with 8 zones - Hydraulic control for hot runner nozzles (1 valve) - 10-circuit water distribution manifold with temperature indication - Pneumatic ejector - Additional fine oil filter in the bypass - Interface for a host computer Nsdpfs Adp Elex Aatjwn

Condition: as good as new (ex-display), Year of construction: 2025, KraussMaffei KM 651-6100 GX hydraulic injection molding machine LRX 250 robot Year of manufacture: 2025 TECHNICAL DATA Manufacturer: KraussMaffei Year of manufacture: 2025 Clamping force: 6500 kN (650 tons) Machine type: hydraulic injection molding machine Robot: KraussMaffei LRX 250 CLAMPING UNIT Clamping force: 6500 kN (650 t) Mold opening force: 455 kN Platen dimensions: 1660 × 1530 mm Tie bar spacing: 1200 × 1020 mm Mold opening stroke: 1450 mm Minimum mold height: 450 mm Maximum mold height: 1000 mm Maximum platen clearance: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140/70 kN INJECTION UNIT Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Injection shot weight: 2391 g (HDPE) Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed: 147 rpm Plasticization rate: 102 g/s Nozzle closing force: 166 kN ELECTRICAL AND HYDRAULIC SYSTEM Pump motor power: 97 kW Installed heater power: 54 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap 6: 3.3 s / 840 mm Dry cycle time according to KraussMaffei: 2.9 s / 600 mm Oil tank capacity: 1435 l DIMENSIONS AND WEIGHT Machine length: 10,190 mm Machine width: 3030 mm Machine height: 2510 mm Net weight: 38,500 kg KRAUSSMAFFEI LRX 250 ROBOT Manufacturer: KraussMaffei Model: LRX 250 Type: linear robot, 3-axis Payload: below 25 kg (including gripper and part) X-axis – stroke from mold: 900 mm Y-axis – vertical stroke: 1000/1000 mm, telescopic Z-axis – transverse stroke: 2500 mm Axis drives: servo motors Nwedpfx Ae Aaxp Ssatjn Vertical axis: equipped with a motor brake Part removal side: opposite to the operating side

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6150, IMV Presse HPF-AZ80 800ton Hydraulic Injection Moulding Press (2008) With Overhead hydraulic tank and robot loading system Nwsdpfsz T Ngijx Aaten

Condition: used, Year of construction: 2016, operating hours: 26,000 h, clamping force: 850 kN, displacement volume: 679 cm³, injection pressure: 2,000 bar, overall weight: 55,000 kg, screw conveyor diameter: 95 mm, terms of delivery: EXW (ex Works) delivery time: on request Nedpfx Aaoz S N Rfotown terms of payment: 100% prior to delivery

Condition: used, Two used Demag injection molding machines are for sale. Attached are the requested photos of our used 280-ton and 650-ton Demag machines, robot, conveyor belt, and enclosure. Nsdpfxsz Sl Eaj Aatswn The machines are still in use in ongoing production and can be inspected while in operation. The costs and organization for dismantling, transporting the machines out of the hall to the truck, loading, and transporting them to your location will be borne by the buyer. The used 650-ton machine, robot, conveyor belt, and enclosure. The used 280-ton machine, robot, conveyor belt, and enclosure.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1510 x 1370 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 / 48 kN Injection unit: Screw diameter 80 mm Ls/D ratio 22,5 Injection pressure 2205 bar Stroke volume 1810 ccm Shot weight (PS) 1647 gr. Injection rate 498 ccm/s Screw speed 195 1/min Plasticising rate max. 106 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,50 x 3,00 x 2,70 m Total machine weight 35000 kg Accessories: - Anti vibration pads - 10-fold water regulator - Krauss Maffei Robot LRX250 X: 900 mm Servo Y: 1000/1000 mm Servo Z: 3500 mm Servo C: 0 - 90 ° Nsdoz N E Eyopfx Aatewn Additional Options: - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Robot interface according to Euromap 67 - 6 x hydraulic sequentional valves - 12 x hotrunner controller - 1 x Air valve

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Nwodez Nkavepfx Aatsn Equipment: - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits - 6 additional vacuum circuits

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 84 mm, clearance between the columns: 910 mm, displacement volume: 2,050 cm³, injection pressure: 1,620 bar, injection weight: 1,886 g, mold height (min.): 350 mm, ejector force: 110 N, ejector stroke: 250 mm, plate width: 1,260 mm, plate height: 1,270 mm, total length: 7,200 mm, total width: 2,150 mm, total height: 2,230 mm, overall weight: 17,210 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 183 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN500D1-3330 D=84 Clamping force 500T Tie bar spacing 910x830 Tool installation height 350 to 900 Robot interfaces Euromap 67, Euromap 13 Suitable robot available upon request Basic standard equipment: • CE standard • KEBA-3018 control system • Thermal insulation cover for the cylinder • Energy meter, intelligent version • 2 sets of core pull • 1 set of air blow device on the moving platen • 1 set of air blow device on the stationary platen • EUROMAP-67 interface • IT system • EUROMAP-13 core pull interface on the stationary platen • EUROMAP-13 core pull interface on the moving platen Nsdpfxez I T E Do Aatswn • 1 set of 6-way water distributor for the moving platen (11 l/min) • 1 set of 6-way water distributor for the stationary platen (11 l/min)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 90 mm, Clamping force 5000 kN Mould opening force, max. 279 kN Travel force movable platen opening 137,1 kN Travel force movable platen closing 116,8 kN Size of mould platens (h x v) 1370 x 1200 mm Distance between tie bars (h x v) 1000 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection pressure 1839 bar Nedpfx Asz I Dvyoatown Stroke volume 2290 ccm Shot weight (PS) 2084 gr. Injection rate 604 ccm/s Screw speed 195 1/min Plasticising rate max. 134,2 g/s Nozzle pressure 129,4 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1175 ltr. Dimensions and weights: Dimensions of the machine ca. 8,00 x 2,52 x 2,40 m Total machine weight 28800 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pull on fix plate - 2 x core pulls on movable plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2014, WOOJIN DL650S Injection Molding Machine Year of manufacture: 2014 INJECTION UNIT • Screw diameter: 90 mm • Injection pressure: 1848.5 bar • Injection volume: 3140 cm³ • Injection weight (PS): 2894 g • Injection speed: 801 cm³/sec • Screw stroke: 495 mm • Plasticization capacity: 394 kg/hour • Screw speed: 145 rpm CLAMPING UNIT • Clamping force: 650 tons (6374 kN) • Distance between columns (H x V): 1010 x 1010 mm • Platen dimensions (H x V): 1460 x 1460 mm • Mold opening stroke: 700 – 1350 mm • Maximum distance between platens: 1800 mm Njdpfx Aasz I Ac Eetjwn • Mold height (Min./Max.): 450 / 1100 mm • Ejector force: 19.8 tons (194 kN) • Ejector stroke: 250 mm • Clamping system: Two-platen direct clamping GENERAL DATA • Pump motor power: 91.4 kW (15+16.4+60 kW system) • Heating power: 33.6 kW • Total installed power: 125 kW • Oil tank capacity: 1500 l • Machine weight: 32 tons • Machine dimensions (L x W x H): 8100 x 2600 x 2300 mm

Condition: used, Year of construction: 2021, operating hours: 39,900 h, clamping force: 750 kN, displacement volume: 2,863 cm³, injection pressure: 1,870 bar, overall weight: 32,000 kg, screw conveyor diameter: 90 mm, terms of delivery: EXW (ex Works) Nsdpfez H Aicex Aatswn delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2005, clamping force: 6,500 kN, screw diameter: 80 mm, injection weight: 1,600 g, Hydraulic injection moulding machine manufactured in 2005. This DEMAG D 650 features a clamping force of 6500 kN and a screw diameter of 80 mm. It offers a shot weight of 1,600 g and includes a handling system by Wittmann. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 650 machine we have for sale. Contact us for further details. • Hydraulic Core Pulls: 4 • Hydraulic Cascade: 8 Njdpfxsz E Hikj Aatswn • Hot Runner Control Zones: 16 • Handling System: Wittmann W 843 Pro 0815 • Handling System Year of Manufacture: 2021 • Z-axis Travel: 3,000 mm • Y-axis Travel: 2,000 mm • X-axis Travel: 1,200 mm • C-axis: Servo, 180° • B-axis: Servo, 270° • Machine in very good overall condition • Annual maintenance has been carried out

Condition: excellent (used), Year of construction: 2012, operating hours: 37,830 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, ARBURG Allrounder 630 S 2500-800 Nwodpfxoz A Tgko Aaten Stock No.: 503409 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 37830 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 225 mm Ejector Force: 90 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Technical Data – Injection Unit Screw Diameter: 50 mm Displacement Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 1000 N Free Injection Flow Rate: 300 g/s PS Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 6.4m x 1.95m x 2.21m Total Weight: 12140 KG Equipment Screen text in German Screen text in English CEE socket 16A Compact Flash interface for data set storage Hydraulic core pull 1x Air valve 2x Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface OPC interface Schuko socket 10A Selector unit Tool heating 12x

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Nwsdpfxsz Az Iaj Aaten Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: ready for operation (used), Year of construction: 2018, operating hours: 54,823 h, clamping force: 7,000 kN, screw diameter: 80 mm, injection weight: 1,916 g, total width: 2,780 mm, total height: 2,320 mm, overall weight: 20,000 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,200 mm, Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details. • Operating hours: 54,823 h • Clamping unit: • Platen dimensions: 1,510 x 1,440 mm • Distance between tie bars: 1,000 x 960 mm • Min. mould height: 450 mm • Max. mould height: 950 mm • Max. opening width: 1,850 mm • Injection unit: Nwsdpjz Az Erefx Aatjn • Injection unit size: 5160 • Shot volume: 2,061 cm³ • Max. injection pressure: 2,300 bar • Electrical and hydraulic: • Hydraulic pump motor power: 109 kW • Heating power: 40.7 kW

Condition: used, DEMAG Ergotech System 650/1000-3300 with 6,500 kN clamping force and 3300 Euromap injection unit, equipped with a 2021 Wittmann W843 pro robot featuring servo B axis 270° and servo C axis 180°. The machine delivers 1,600 g shot weight through an 80 mm screw, supported by 4 hydraulic core pulls, 8 cascade circuits, and 16 hot runner zones for complex multi-component and technical moulding. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 6.500 Tie-bar clearance (H x V) mm: 1.000 INJECTION UNIT Injection unit size (Euromap): 3300 Screw diameter mm: 80 Max. shot weight (PS) g: 1.600 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 8 Hot runner control zones: 16 Handling robot (model / year): Wittmann W843 pro (2021) Robot strokes X / Y / Z mm: 1.200 / 2.000 / 3.000 Robot rotary axes (B / C): C servo 180° / B servo 270° Nedpfxozz S Uao Aatjwn DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 241 + 108

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. Njdpfx Aaozza Egstown The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2012, machine number type model year clamping force distance between opening stroke screw shot volume tie bars diameter ton mm mm mm cm3 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 2494 E-screwdrive 14 5500-5600 SXN 2000 550 830x830 850 98 3394 Hydraulic motor 15 5500-5650R 2K S+ 2009 550 830x830 850 84 1247 E-screwdrive 16 5500-5650R 2K S+ 2011 550 830x830 850 84 1247 E-screwdrive 17 6600-8650R S+ 2008 660 900x900 940 98 1886 E-screwdrive 18 6600EP-8650 S+ 2009 660 1000x1000 1200 115 5349 E-screwdrive 19 6600-8650R S+ 2010 660 900x900 940 98 1886 E-screwdrive 20 12000-19000 SXN 2003 1200 1200x1200 1500 150 12193 Hydraulic motor Nodpfxezykzis Aatjwn

Condition: ready for operation (used), Year of construction: 2008, operating hours: 45,000 h, clamping force: 8,000 kN, screw diameter: 120 mm, Hydraulic injection moulding machine manufactured in 2008. This HAITIAN SA8000 features a clamping force of 8,000 kN and an injection volume of 5,768 cm³, making it suitable for various applications. The machine is equipped with a screw diameter of 120 mm and has undergone recent servicing, including a new nozzle filter installed in 2023. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN SA8000 machine we have for sale. Contact us for further details. • Injection volume: 5,768 cm³ • Installed power: 163.55 kW • Power supply: 380 V / 50 Hz • Estimated operating hours: ~45,000 h • Last used in production: 03 Apr 2025 • CE marking: Not available • Maintenance/Upgrades: Njdozx Ukxjpfx Aatjwn • Screw and barrel replaced: Sep 2022 • Back-pressure unit serviced • Measuring scale serviced Additional equipment • Nozzle filter: HASCO H109/25 × 50 × 1.2 (installed 2023)