UMO services

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 500 mm, spindle bore: 80 mm, turning diameter: 760 mm, center height in crank: 1,030 mm, center height: 380 mm, center width: 2,200 mm, turning length: 2,200 mm, total length: 3,900 mm, total width: 1,200 mm, total height: 1,850 mm, spindle speed (max.): 1,300 rpm, spindle speed (min.): 23 rpm, overall weight: 3,650 kg, Denver HG-760x2200 Rarely used. Spindle height: 380 mm Distance between centers: 2200 mm Spindle bore: Ø 80 mm Spindle speeds: 23–1300 rpm Automatic longitudinal and transverse feed Godezy U E Sopfx Acmjug Threading / Metric / Inch, etc. Three-jaw chuck Digital display for longitudinal and transverse axis Steady rest Ø 490 mm Steady rest Ø 400 mm Four-jaw chuck / faceplate Work light 3 x 400 V Delivery possible

Condition: used, Year of construction: 1987, spindle bore: 105 mm, Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Gsdpfx Aezwgqzscmoug Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional: 1 way Automatic travel X + Z is not functionnal Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

Condition: used, Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth Godpfxezwgqho Acmjug 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Condition: used, Parallel Lathe SCULFORT MAXICAP type 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Gusdpfx Ajzwgp Docmog Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Condition: good (used), Year of construction: 2018, spindle bore: 140 mm, turning diameter over bed slide: 1,100 mm, center width: 4,000 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 4 rpm, overall weight: 14,500 kg, Turning lathe, manufacturer: FAT HACO, type: TUR SMN 1100 x 4000 Guedpfx Aszvwmqocmjg Year of manufacture: 2018, serial number: 180529, control system: SIEMENS 840 D SL, distance between centers: 4,000 mm, swing diameter over bed: 1,100 mm, swing diameter over cross slide: 790 mm, max. workpiece weight between centers: 4,000 kg, spindle speed: 4 to 1,200 rpm, spindle bore: 140 mm, drive power: 33 kW, machine weight: 14,500 kg. The standard equipment of the machine includes an 8-position VDI turret, a hydraulic steady rest, an automatic gear change, a coolant system, a hydraulic unit, an automatic lubrication system, work area lighting, a USB port, and CE-compliant design.

Condition: good (used), Year of construction: 1986, Muller lathe, model 1500 - Max. turning diameter: 700 mm - Distance between centers: 1500 mm - Bore diameter: 72 mm - Year of manufacture: 1986 - Rapid traverse rate on the Z-axis (cross slide) Guodpfxozuvxcs Acmeg

Condition: new, Year of construction: 2026, The CORMAK GOLIAT 800 × 4000 (CJ6280YC/4000) Main Advantages Versatile machining capabilities – the GOLIAT 800 × 4000 enables external and internal turning, taper turning, polishing, metric, imperial, module and DP threading, drilling, and broaching operations. Heavy-duty cast iron bed construction – provides maximum vibration damping. The bed is hardened and precisely ground, ensuring excellent torsional rigidity, long service life, and machining accuracy. Central feed control system – equipped with a lead screw and feed shaft for threading and automatic longitudinal and cross feeds. 3-axis digital readout system – displays precise position values for longitudinal movement, cross slide movement, and compound slide movement using optical scales and electronic signal processing. High-quality spindle bearing system – reinforced spindle support with precision bearings ensures smooth operation and high machining stability. High machining capacity – large spindle bore of 105 mm, center distance of 4000 mm, 315 mm 3-jaw chuck, 400 mm bed width, and a powerful 7.5 kW motor provide excellent performance for large workpieces. Rapid longitudinal and cross feed system – significantly reduces machining time and improves productivity. Hardened and ground spindle gears – ensure quiet operation, durability, and reliable power transmission. Automatic feed and threading capability – the lead screw and feed shaft allow precise thread cutting and automatic feeds. Ergonomic control panel – allows easy adjustment of spindle speeds and automatic feed parameters. Threading dial indicator – enables accurate thread engagement and repeatable threading operations. Removable bed gap section – allows machining of oversized components such as discs. With the gap removed, the machine can handle workpieces with a maximum diameter of 1000 mm. Technical Specifications Maximum turning diameter over bed Ø800 mm Maximum turning diameter over cross slide Ø560 mm Maximum turning diameter in bed gap Ø1000 mm Bed gap length 225 mm Godpfxszp H Aze Acmjug Distance between centers 4000 mm Bed width 400 mm Maximum tool size 25 × 25 mm Maximum compound slide travel 140 mm Maximum cross slide travel 350 mm Spindle bore Ø105 mm Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36–1600 RPM) Longitudinal feed range 65 steps (0.063–2.52 mm/rev) Cross feed range 65 steps (0.027–1.07 mm/rev) Metric threads 22 ranges (1–14 mm) Imperial threads 25 ranges (28–2 TPI) Module threads 18 ranges (0.5–7 mm) DP threads 24 ranges (56–4 DP) Rapid longitudinal feed 4.5 m/min Rapid cross feed 1.9 m/min Tailstock quill diameter 75 mm Tailstock taper MT5 Maximum tailstock quill travel 150 mm Tailstock lateral adjustment ±15 mm Main motor power S1/S6 7.5 / 9 kW, 400 V Rapid feed motor power 250 W Coolant pump power 60 W Machine dimensions (L × W × H) 5700 × 1150 × 1800 mm Machine weight approx. 5300 kg (±2%) Standard Equipment 3-axis digital readout system Self-centering 3-jaw chuck, 315 mm Independent 4-jaw chuck, 400 mm Faceplate, 400 mm Rapid feed system Fixed steady rest Follow rest Two fixed centers MT5 Spindle reducing sleeve Coolant system Work lighting Chuck and tool post keys Complete set of service tools Operating manual CE Declaration of Conformity

Condition: not inspected (used), Year of construction: 1984, spindle bore: 81 mm, turning length: 2,000 mm, capacity: 2000 x 725 mm Gujdpfozpza Iex Acmog diameter on transverse slide: 400 mm spindle bore: 81 mm weight: 3100 kg

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests Gusdpfxezphf Ds Acmsg - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is probably the best German-made lathe in its class ever built. BOHEHRINGER precision lathe, model DUE 630 Year of manufacture: 1991 Serial number: 1032.1239-08 Center height: 320 mm Swing diameter over bed: 640 mm Distance between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 82 mm Spindle head: DIN 55022, size 8 Drive power: 24 kW Max. torque: 2,000 Nm 24 speeds: 9 – 1,800 rpm Gedpfxszlm Ucj Acmsug 60 cross feed rates: 0.03 – 28 mm/rev 60 longitudinal feed rates: 0.06 – 56 mm/rev Footprint: L x W approx. 4,000 x 1,525 mm Weight: approx. 4,500 kg Accessories: - 3-axis digital display HEIDENHAIN - Parat tool holder including 4 holders - Coolant system - Chip guard back panel - 3-jaw chuck T 315 mm including jaws - Roller strip cover for lead screw support to the bed - Machine light - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine has been completely technically inspected and can be inspected under power if desired. The gearbox runs very well. The bed guides are also in good condition.

Condition: good (used), Year of construction: 1978, turning diameter over cross slide: 430 mm, spindle bore: 82 mm, turning diameter: 640 mm, center height: 320 mm, center width: 3,000 mm, quill stroke: 250 mm, total length: 5,600 mm, total width: 1,300 mm, total height: 1,900 mm, swing diameter over cross slide: 430 mm, bed width: 430 mm, Turning diameter in gap: 850 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 9 rpm, Conventional lathe, center high 320 mm, between centers 3000 mm, bore Ø 82 mm, 27 speeds 9 - 1800 rpm, motor 18,5 kw, nose DIN', dimensions 560x130x190 cm, weight ca. 5000 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck FORKART Ø 400 mm, tool post RAPID with toolholders, steady and following rest with roller pin Gsdpjzin Nijfx Acmsug

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm -Distance between centers 1500mm Gusdpfxjzhx Hvs Acmsg -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Errors and omissions excepted.

Condition: used, total length: 3,600 mm, total width: 1,300 mm, total height: 1,400 mm, Colour: Green Empty weight: 3.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 335 - Swing over bed [mm]: 670 - Carriage turning diameter [mm]: 670 - Distance between centres [mm]: 2000 - Bed width [mm]: 510 - Spindle bore [mm]: 83 Gedpfx Aszhwbxecmjug - Min. spindle speed [rpm]: 16 - Max. spindle speed [rpm]: 1250 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3600mm x 1300mm x 1400mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Gjdpsy Icbaofx Acmoug

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm Guodpfoy Ar Nijx Acmsg - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 105 mm, turning diameter: 660 mm, center height: 330 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,600 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, overall weight: 3,700 kg, EX-STOCK PROMOTIONAL OFFER! NEW "CE" CERTIFIED. LATHE WITH MECHANICAL CLUTCH 3-AXIS DRO AND SEMI-NORTON GEARBOX. EQUIPPED WITH JOYSTICK FOR RAPID FEED ENGAGEMENT. ONE-PIECE CAST IRON BED. Center height: 330 mm Max swing over bed: 660 mm Max swing over carriage: 420 mm Max swing in gap: 870 mm Tool height: 32 mm Distance between centers: 2000 mm Spindle bore: 105 mm Spindle mount: Camlock D1-8 Spindle speeds: (12) 36 ÷ 1600 rpm Longitudinal feeds: 0.063 ÷ 2.52 mm/rev Cross feeds: 0.027 ÷ 1.07 mm/rev Metric threads: (22) 1 ÷ 14 mm Imperial threads: (26) 2 ÷ 28 TPI Tailstock taper: MT 5 Motor: 400 V 50 Hz 7.5 kW Coolant pump: 400 V 50 Hz 90 W Dimensions: 3500 x 1400 x 1600 mm Net weight: 3700 kg INCLUDED IN DELIVERY: 320 mm Ø three-jaw self-centering chuck, reversible jaws 400 mm Ø four-jaw independent chuck 600 mm Ø faceplate Travelling steady Fixed steady Rotating tailstock center MT 5 Thread chasing dial Leadscrew guard Tool post guard Gujdpfxoyyn Dds Acmsg Spindle guard Rear splash guard Quick-change tool post type C LED work lamp Cooling system Electro-mechanical foot brake Quick-lock tailstock carriage Carriage gears in oil bath Adjustable leveling pads

Condition: used, turning diameter over bed 2100 mm turning diameter over slide rest 1300 mm turning length 6800 mm workpiece weight 25000 kg main drive motor 140 kW Control Siemens type 840 C faceplate 1100 mm bed width 2500 mm steady 800 mm steady 800 mm steady 800 mm steady 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Godpfx Acoyt Rzksmjug than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Immediately available. No waiting, start machining right away! Machine: MEXPOL TUB 660 x 3000 mm with stepless speed adjustment via frequency inverter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle nose: DIN 55027/11 Speed range: 9 – 1320 rpm Main drive: 15 kW Feed rate: longitudinal feed 0.039–18 mm/rev, cross feed 0.02–9 mm/rev Rapid traverse: longitudinal 3800 mm/min, cross 1900 mm/min Tailstock: Quill diameter 105 mm, Stroke 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard equipment: frequency inverter, quick-change toolpost size C, coolant system, interlocked chuck guard, work light, change gear set, CE conformity Dimensions: Guodpsyr Dmkjfx Acmog 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediate from stock (while stocks last)

Condition: new, neu Bulgarien 58370 € 1103.19 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 3 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm Gusdpfsyq Stpjx Acmog 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 54970,00 turning length1.500 mm € 56350,00 turning length3.000 mm € 62720,00 turning length4.000 mm € 685,00 turning length5.000 mm € 83910,00

Condition: new, neu Bulgarien 89440 € 1690.42 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" Godoyq Sn Tjpfx Acmoug FURTHER TURNING LENGTHS: turning length 1.500 mm € 75340,00 turning length2.000 mm € 78380,00 turning length4.000 mm € 95860,00 turning length5.000 mm € 108730,00 turning length6.000 mm € 122800,00

Condition: new, neu Bulgarien 64180 € 1213 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 3 16 - 63; 63 - 250; 315 - U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW Gusdpfx Asyq Sm Necmjg 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 turning length1.500 mm € 62160,00 turning length3.000 mm € 686,00 turning length4.000 mm € 74540,00 turning length5.000 mm € 90020,00

Condition: new, Year of construction: 2025, turning diameter over top slide: 575 mm, center height: 385 mm, turning length: 1,500 mm, total length: 3,000 mm, total width: 1,100 mm, total height: 1,450 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 14 mm, metric thread steps: 22, bed width: 405 mm, Turning diameter in gap: 1,050 mm, type of input current: three-phase, overall weight: 3,500 kg, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 2 m/min, quill mount: MK 5, three-jaw chuck diameter: 325 mm, Centre distance ----- 1500 mm Centre height ----- 385 mm Swing diameter ----- 770 mm Main spindle bore ----- 105 mm Bed width ----- 405 mm Spindle speed ----- 36-1600 rpm Motor ----- 7.5 kW Weight ----- 3500 kg Gusdpfx Aeym Eccjcmjg INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool post type Multifix TOOC3 with 4 tool holders * 3-jaw chuck 325 mm * 4-jaw chuck 400 mm * Faceplate 750 mm * Fixed and travelling steady rest * LED work lamp and coolant system * Box with various tools

Condition: not inspected (used), functionality: unexamined, turning length: 3,000 mm, spindle speed (max.): 1,800 rpm, overall weight: 8,000 kg, three-jaw chuck diameter: 310 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within one of the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Gsdpfx Asym Dcuecmoug Turning length: 3,000 mm Center height over bed: 300 mm Swing diameter over bed: 600 mm Center height over carriage: 200 mm Swing diameter over carriage: 400 mm Spindle speed: 9 to 1,800 rpm Spindle bore: 110 mm Three-jaw chuck diameter: 310 mm Steady rest diameter: 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,400 x 2,000 mm Weight: 8,000 kg EQUIPMENT Tailstock Multifix turning tool holder Three-jaw chuck Two-axis digital readout (SONY) Steady rest External Reference: Pieper – Lot 57

Condition: new, Year of construction: 2026, CORMAK 660 × 2000 Universal Lathe The CORMAK 660 × 2000 Universal Lathe is a heavy-duty industrial conventional lathe designed for precision metalworking in manufacturing environments. Its robust construction, featuring a massive hardened bed and a powerful 7.5 kW spindle drive, ensures excellent machining stability, dimensional accuracy, and long service life, even under intensive production conditions. Key Features of the CORMAK 660 × 2000 Universal Lathe Electromagnetic foot brake ensures maximum operator safety while significantly reducing downtime by allowing fast and reliable machine stopping. Rapid longitudinal and cross feeds considerably reduce tool travel time, increasing machining efficiency and operator productivity. Versatile machining capabilities including external and internal turning, taper turning, thread cutting (metric, imperial, module, and DP), drilling, broaching, and polishing. Hardened and precision-ground 350 mm cast iron bed provides outstanding vibration damping and high machining accuracy. Guodpfx Acjyk Dabsmeg Large Ø105 mm spindle bore with D1-8 spindle nose allows machining of large-diameter shafts and workpieces. High-performance spindle drive with 7.5/9 kW motor delivers reliable power for demanding cutting operations. Wide thread-cutting range without changing change gears, saving setup time and improving production flexibility. 3-axis Digital Readout (DRO) enhances positioning accuracy and provides better control over the machining process. The machine body is manufactured from high-quality cast iron, providing a substantial machine weight of approximately 3,190 kg, ensuring excellent vibration absorption. The headstock is equipped with a reinforced bearing system for smooth and stable operation throughout the spindle speed range of 25–1500 rpm. A centralized feed gearbox, leadscrew, and feed rod enable precise thread cutting as well as automatic longitudinal and cross feeds. Standard Equipment 3-axis Digital Readout (DRO) 315 mm 3-jaw chuck 400 mm 4-jaw chuck 400 mm faceplate Fixed steady rest Follow rest Coolant system Machine work light Operating manual (Polish/English) CE Declaration of Conformity Technical Specifications Parameter Value Swing over bed Ø660 mm Swing over cross slide Ø455 mm Swing in gap (diameter × width) 885 × 170 mm Centre height 330 mm Distance between centres 2000 mm Bed width 350 mm Maximum tool shank size 25 × 25 mm Cross slide travel 355 mm Compound slide travel 130 mm Spindle bore Ø105 mm Spindle nose D1-8 Spindle taper Ø113 mm (1:20) Number of spindle speeds 12 Spindle speed range 25–1500 rpm Leadscrew diameter × pitch Ø40 × 6 mm Imperial thread range 2–112 TPI (60 selections) Metric thread range 0.2–14 mm (47 selections) Diametral Pitch (DP) threads 4–112 DP (50 selections) Module threads 0.1–7 Module (39 selections) Longitudinal feed range 0.059–1.646 mm/rev (35 selections) Cross feed range 0.020–0.573 mm/rev (35 selections) Tailstock quill travel 180 mm Tailstock quill diameter Ø75 mm Tailstock taper Morse Taper No. 5 (MT5) Main spindle motor 7.5 kW (10 HP), 3-phase Coolant pump motor 0.1 kW (1/8 HP) Installation dimensions (L × W × H) 334 × 115 × 151 cm Packing dimensions (L × W × H) 340 × 115 × 182 cm Machine weight 3200 kg

Condition: used, total length: 10,560 mm, total width: 1,710 mm, total height: 1,400 mm, Colour: Green Empty weight: 9.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 22.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 6000 - Bed width [mm]: 700 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 1180 - Options: Digital readout - Type of digital readout: Sony - Transport dimensions: 10560mm x 1710mm x 1400mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gjdpsyg Hi Rjfx Acmeug Lukas van Rossum