Verso UG

Condition: ready for operation (used), Year of construction: 1997, operating hours: 9,218 h, functionality: fully functional, machine/vehicle number: 10842, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, table width: 457 mm, table length: 1,320 mm, table load: 1,500 kg, overall weight: 5,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, The machine was only used in single-shift operation in a special machine construction facility. No contract manufacturing was performed. The machine is being sold because the special machine construction facility is being shut down. The machine can be inspected while powered on. It is fully functional, and the documentation is available. This 3-axis HAAS FV-4 machine was manufactured in 1997. It has a travel distance of 1,270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine operates with a spindle speed of approximately 8,000 RPM and has the following operating hours: • Total operating time: 9218 h • Cycle time: 4584 • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz Fjds Aiun Rjpfx Am Esgi • Full-load current: 20 A

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 25, number of axes: 3, This 3-axis HAAS VF-6/40 was manufactured in 2014. It features impressive travels of 1626 mm in the X-axis, 813 mm in the Y-axis, and 762 mm in the Z-axis. The machine is equipped with a spindle speed of 8100 rpm and a robust table size of approximately 1625 x 711 mm, supporting a maximum load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6/40 vertical machining centre we have for sale. Contact us for further details. • Table dimensions: approx. 1,625 × 711 mm • Through-spindle coolant: 21 bar • Probing: Renishaw tool and workpiece probes • Control/options: 4-axis control, memory expansion, HDD • Cutting time: 11,368 hours as of 08/2026; spindle and main motor replaced at that time • Service history: All service by Haas. In 2025: X-axis covers, tool magazine motor, swing-arm motor, and main machine control board replaced Additional equipment • Replacement spindle available Fgodpfj Airt Usx Am Eji Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,016 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 40, number of axes: 3, This 3-axis HAAS VF-8/40 was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-8/40 vertical machining centre we have for sale. Contact us for further details. CNC control • Haas CNC control, Classic generation • 15-inch color LCD • USB port • Program memory: 1 MB (with memory lock keyswitch) • Remote jog handle with colour displayAxis travels and feed rates • Spindle nose to table: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Max cutting feed rate: 12.7 m/minWorktable • Table size: 1626 × 914 mmSpindle • Taper: 40 taper • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tappingTool changer • Side-mounted tool changer, 40 positions • Tool-to-tool: 2.8 s • Chip-to-chip: 3.6 sCoolant and chip management • Through-spindle coolant (TSC): 20 bar, 22 L/min • Programmable coolant nozzle • Coolant system with pull-out tankProbing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles • PMDS probe interface with internal power supply and wiring • Spindle orientation, coordinate rotation and macros Fgodo Aig Shjpfx Am Esi • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead (3-axis interpolation) • 4AXD fourth-axis preparation (connections and wiring; rotary table not included) • APC-READY pallet changer preparation (additional functions, macro support and wiring; pallet changer not included)Machine features • Ball screw thermal compensation • Fully enclosed machining area (sliding front doors, hinged side windows) • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting Additional equipment • Screw-type chip auger • ACF additional coolant filtration unit, 25 µm • CABCOOL CNC control cabinet cooling unit • 24x through-spindle coolant-compatible toolholder pull studs

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazatrol, controller model: M-plus, workpiece weight (max.): 1,000 kg, total height: 2,650 mm, total length: 5,580 mm, total width: 2,980 mm, table width: 510 mm, table length: 2,000 mm, table load: 1,000 kg, rotary table diameter: 320 mm, overall weight: 7,320 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this Mazak vertical machining center at a very competitive price. We are selling the machine “as is.” . Of course, a live demonstration is possible. Due to export regulations, sale is limited to EU countries only. Technical details: Year of manufacture: 1997 Table dimensions: 2000x510 mm Table load capacity: 1000 kg Fsdpfx Ams Aifrps Eegi X-axis travel: 1660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle speed: 10,000 rpm Spindle motor: 11/7.5 kW Positions in tool magazine: 24

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M+, spindle speed (max.): 7,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Fsdpfx Amo Ah H Iho Esgi Travel range, Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tool positions MACHINE DETAILS CNC control: Mazatrol M+ Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor: MAYFRAN 4th axis with rotary indexing table: Rotamatik RM 100

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Fgsde Ah E S Hspfx Am Eji Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN Mynx 7500 was manufactured in 2011. It features an impressive X-axis travel of 1,525 mm, Y-axis travel of 762 mm, and Z-axis travel of 625 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the DOOSAN Mynx 7500 vertical machining centre we have for sale. Contact us for further details. - Control Unit: DOOSAN-FANUC i Series - Tool Changer Capacity: 30 stations - Through-Spindle Coolant (TSC): 20 bar - External Coolant: Yes - Measuring Probe: Renishaw probe - Operating Hours - Cutting Time: 40,592 h - Operating Hours - Cycle Time: 2,760 h - Operating Hours - Part Count: 277 - Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz - Rated Power: 38.35 kVA - Full Load Current: 137.34 A - Interrupting Capacity: 5 kA - Short Circuit Capacity: 10 kA - Total Machine Weight: 13,500 kg Technical Specification Fgjdpo Ah Exdsfx Am Esi Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50 XTHE was manufactured in 2010. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50 XTHE vertical machining centre we have for sale. Contact us for further details. - Supply Voltage: 360–480 V - Power Supply: 3-Phase - Mains Frequency: 50/60 Hz - Full Load Current: 40 A - Largest Load Current: 70 A - Circuit Diagram: 96 - Circuit Diagram Number: 0284 - Table Dimensions: 1,575 × 584 mm - Maximum Table Load: 1,814 kg - Tool Taper: SK 50 / BT 50 (depending on configuration) - Tool Changer: 30+1 tool stations - Rapid Feed Rate X/Y/Z: 18 m/min - Machine Weight: approx. 7,371 kg - Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm Fgodpfxs Ahxyws Am Esi

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. Fgjdo Ahxvajpfx Am Eoi - Table Dimensions: 1,575 × 584 mm- Maximum Table Load: 1,814 kg- Spindle Taper: CT 50 / BT 50- Tool Changer Capacity: 30+1 pockets- Rapid Traverse (X/Y/Z): 18 m/min- Coolant Tank Capacity: 360 L- Machine Weight: approx. 7,371 kg- Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm- Supply Voltage: 440 V - Phase: 3-Phase - Frequency: 50/60 Hz- Full Load Current: 55 A- Maximum Load Current: 50 A- Wiring Diagram Number: 96 / 0284- CE Marked: Yes

Condition: used, Year of construction: 2003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Machining Center - Vertical Manufacturer: MIKRON Model: VCE 1600 PRO Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Fgsdpj Ahrm Djfx Am Eei Technical specifications: X-axis: 1,600 mm Y-axis: 900 mm Z-axis: 900 mm Spindle speed: 10,000 rpm Number of tool stations: 30 Machine weight: approx. 18,500 kg Condition: Used Technical features & accessories: - 2 rear-mounted chip conveyors, integrated into the machine - Oil cooler - Coolant filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99. Fedpfx As Ahpqmem Esgi

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 Fgodpfxj Ahkz Re Am Eei - Spindle power : 12.5 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1600 / 1200 / 700 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 30 [m/min] - Cutting feed rates (X/Y/Z) : 20 / 20 / 20 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1800 x 1300 [mm] - Maximum weight upon table : 4000 [kg] - Distance table / spindle nose (min./max.) : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.340 x 3.710 [mm] - Machine height : 4.060 [mm] - Machine weight : 18870 [kg] EQUIPMENT - CNC : Heidenhain TNC 640 - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - Rigid tapping - Coolant tank * with high-pressure pump : 20 [bars] * with paper filtering unit - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe : Heidenhain TT160 - Workpiece probe : Heidenhain TS460 - Electric transformer

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,625 mm, travel distance Y-axis: 864 mm, travel distance Z-axis: 762 mm, table width: 1,676 mm, table length: 889 mm, table load: 2,500 kg, spindle speed (max.): 12,444 rpm, number of axes: 3, This 3-axis HURCO VMX64 was manufactured in 2007. It features a travel of 1,625 mm in the X-axis, 864 mm in the Y-axis, and 762 mm in the Z-axis. The machine includes a table size of 1,676 x 889 mm and a maximum table load of approximately 2,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX64 vertical machining centre we have for sale. Contact us for further details. - Control: HURCO Ultimax with WinMax (hard drive replaced, WinMax reinstalled) - Conversational and DIN/ISO programming (G-code), two screens, electronic handwheel - Tool taper: SK 40 - Tool changer: 40 stations - Power connection: 3 x 400 V EQUIPMENT - Chip conveyor - Coolant/filtration system KNOLL gravity paper band filter type PF 350/1050, YOM 2007 (filter capacity up to 350 l/min emulsion) - Spindle cooler (HABOR) - Oil mist extractor SARA (Type UC350/03) Fedpfxe Ahkaue Am Eegi Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,582 h, travel distance X-axis: 1,250 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 1250 was manufactured in 2019. It features a robust tool changer with 30 stations and comes fully functional and freshly serviced. The machine includes vises, an external tool cabinet with an extensive set of tool holders, collets, and milling/drilling tooling. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1250 vertical machining centre we have for sale. Contact us for further details. - Hours:Spindle: 4.582h, Machine: 11.333h- X-Axis Travel: 1250 mm - Y-Axis Travel: 600 mm - Z-Axis Travel: 650 mm - Table Size: 1350 x 600 mm - Table T-Slots: 5 x 18 x 100 mm - Distance Spindle Nose to Table Surface: 120 - 770 mm - Feed Rate (all axes): Adjustable, 1 - 24,000 mm/min - Rapid Traverse (XYZ): 24 m/min - Standard Spindle Taper: SK 40 DIN 69871 - Standard Spindle Drive: AC Direct Drive Motor, 15.0 / 32.0 kW - Standard Max Torque: 203.7 Nm - Standard Spindle Speed Range: Stepless, 40 - 10,000 rpm - Optional Spindle: SK 40 DIN 69871, 20 - 12,000 rpm, 10.0 / 17.0 kW (100/25% ED), 63.7 / 108.6 Nm, with automatic spindle cooling - Tool Changer: Double arm gripper, 30 tool stations - CNC Control: HEIDENHAIN High-Speed-Cutting TNC 620 Smart Select - Operating Pressure: 6 bar - Total Power Requirement: 35 kVA- Voltage: 400 V- Phases: 3 + PE- Weight: 7900 kg- Tool Changer: Disc/drum type tool magazine (approx. 24–30 stations)- Included Equipment / Accessories: Machine vises (including HOLEX vise mounted on table), external tool cabinet with extensive set of tool holders, collets, and milling/drilling tooling Fjdpfx Ae Agvhaem Ejgi

Condition: reconditioned (used), Haas VF-4 CNC Vertical Machining Centre (2015) Haas CNC control X-axis travel: 1,270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table size: 1,321 × 457 mm Maximum table load: 1,588 kg Standard spindle speed: 8,100 rpm Maximum spindle power: 22.4 kW / 30 hp Spindle taper: 40 taper Automatic tool changer: 20-station carousel Rapid traverse rates: 25.4 m/min Spindle nose to table: 102–737 mm Supplied With: Haas rotary 4th-axis unit with three-jaw chuck, Matching Haas tailstock, Swarf auger and discharge chute, Remote jog handwheel, Coolant system, External tool storage racks and assorted tooling. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79299 Machine Serial Number: 1124936 Cost: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Fgodo Agn Dvepfx Am Eei Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Number of phases: 3 Machine weight: approx. 7,500 kg Fgjdo Aggibopfx Am Eji Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: used, Year of construction: 2000, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Fanuc 16i-M, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Distance from spindle nose to table: 100–850 mm Rapid traverse rate X/Y/Z: 15 m/min Spindle speed: 4,000 rpm Spindle power: 26 kW Spindle interface: ISO 50 / DIN Number of pallets: 2 Table size: 650 × 1,400 mm Table load: max. 1,500 kg Magazine type: Chain magazine Number of tool positions: 41 Tool diameter: max. 120 mm Tool diameter with free adjacent positions: max. 200 mm Tool length: max. 400 mm Tool weight: max. 20 kg MACHINE DETAILS Fgsdps Agfr Esfx Am Esi High-pressure coolant pressure: 30 bar CNC control: Fanuc 16i-M Dimensions & Weight Machine weight: 16,750 kg Overall dimensions: 7,135 × 5,300 × 3,426 mm EQUIPMENT Gear change Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, operating hours: 8,896 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: TNC430, workpiece weight (max.): 1,000 kg, total height: 3,050 mm, total length: 4,000 mm, total width: 2,850 mm, table width: 800 mm, table length: 800 mm, table load: 1,000 kg, rotary table diameter: 800 mm, overall weight: 14,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 8,896 h, coolant supply: 40 bar, spindle motor power: 15,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine comes from a die-making company and has therefore not been used for many hours and has undergone relatively light machining in recent years. Due to an upgrade of the machine park, the machine is no longer needed but is still in full working order and can be inspected in our workshop while it is running. Additional options & accessories: - Chip conveyor - IKZ (internal cooling through the spindle) - 15,000 rpm HSK-A63 spindle Fgsdpe Af Ndxofx Am Eji - Heidenhain 3D probe - Electronic handwheel - Rotoclear - Electrical compensation for thermal expansion - BLUM laser measuring system - Coolant nozzle in the cabinet Weight & dimensions: approx. 14,000 kg 4.0 x 2.85 x 3.05 m (L x W x H)

Condition: used, Year of construction: 2014, Technical specifications • Control system: Fanuc 0i-MD • Travel distances (axes): • X-axis: 1,400 mm • Y-axis: 800 mm (4 guide rails) • Z-axis: 700 mm • Spindle: • Power: 22 kW • Speed: 10,000 rpm • Tool taper: BT40 • Table size: 1,650 x 800 mm • Tool changer: 24 tools • Prepared for 4th axis • Chip conveyor • Handwheel Fgedps Af Ndfsfx Am Eji Guides: Hardened, precision-ground, and Turcite-B coated four-surface rectangular guides (boxways) for heavy-duty machining.

Condition: good (used), Year of construction: 2008, FOR SALE High-performance vertical machining center TOPPER - TONGTAI MDV-812 (Taiwan origin). Fgjdpfs Af Aqkjx Am Eei Official technical specifications: • Model: MDV-812 (High-Speed / Moldmaking Series) • Year of manufacture: June 2008 (Serial number: 020851) • Numerical control: FANUC Series 18i-MB • Machining travels: X = 1,200 mm | Y = 800 mm | Z = 500 mm • Table dimensions: 1,320 × 800 mm • Maximum table load: 2,000 kg (2 tons) • Spindle connection: BT 40 taper • Power supply: 380 V / Three-phase / 50 Hz (Required power: 35 kVA) • Machine weight: 13,000 kg (13 tons) Included equipment: • Complete control panel mounted on an articulated arm • Multi-nozzle coolant system around the spindle • Coolant chiller / Cabinet air conditioner (Euro Chiller) • Remote electronic handwheel Condition: • Used machine in operational condition, sold as is.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Fgodj Afpq Rjpfx Am Eji

Condition: used, Year of construction: 2023, functionality: fully functional, AKIRA SEIKI SR3XP 2023.02 BT40/11000 RPM LINEAR GUIDE Fjdpfe Afpf Uex Am Eegi 760-430-460 MM MITSUBISHI M845 CONTROL MACHINE CAN BE INSPECTED AT OUR ISTANBUL WAREHOUSE.

Condition: used, Year of construction: 2015, functionality: fully functional, Počet os: 3 Pojezd osy X: 1270 mm Pojezd osy Y: 508 mm Pojezd osy Z: 635 mm Technická specifikace Výkon vřetena: 22.4 kW Fedpfxj Ad Iabo Am Ejgi Rychlost vřetena: 12000 RPM

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 167L1131108, feed length X-axis: 1,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, total height: 3,100 mm, total length: 4,800 mm, total width: 3,700 mm, table width: 700 mm, table length: 1,750 mm, overall weight: 11,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, JANUS SMART VMC 1600 Vertical Machining Center We offer for sale a highly efficient and stable JANUS SMART VMC 1600 CNC vertical machining center, manufactured in 2011. The machine features a robust, heavy-duty construction with a weight of 11,000 kg, which guarantees excellent vibration damping and high geometric rigidity during demanding industrial machining. The machine underwent a thorough overhaul in 2025, ensuring excellent accuracy and rigidity. As part of the service, the ball screws were reconditioned, the bearings were replaced, and all telescopic covers were reconditioned. The machine is fully functional, connected, and ready for immediate operation without any additional costs. The center is equipped with a reliable FANUC Series 0i-MD control system, a dynamic 10,000 rpm spindle with a BT40 taper, and an automatic tool changer with a capacity of 24 tools. Fgjdpfx Amo Adudas Eoi Scope of the overhaul (2025): Reconditioning of ball screws in the X and Y axes Bearing replacement (ball screw bearings) Complete reconditioning of telescopic covers in all axes (X, Y, Z) Technical parameters: Parameter: Value / Specification Manufacturer: JANUS Obrabiarki Model: VMC 1600 Year of manufacture: 2011 Condition after overhaul: Yes (2025) CNC control: FANUC Series 0i-MD Work table: 1750 mm x 700 mm Axis travel (X / Y / Z): X 1600 mm, Y 700 mm, Z 700 mm Maximum spindle speed: 10,000 rpm Spindle taper: BT40 Tool magazine: 24 tools Maximum tool diameter: 150 mm / 85 mm Machine weight: 11,000 kg Power supply: 3x 400 V; 50 Hz Machine equipment: Screw chip conveyor Automatic tool changer (ATC) with 24 positions Coolant system for the work area Full protective cabin with sliding work doors Automatic central lubrication system for guides and ball screws Work area lighting and a 3-color status indicator lamp Electronic handwheel (MPG) for convenient workpiece zero setting Additional information: Technical condition: very good (after mechanical service in 2025), machine in continuous working condition, connected – possibility of testing "under power".

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0017, total height: 3,530 mm, total length: 4,495 mm, total width: 6,490 mm, overall weight: 23,000 kg, Equipment: chip conveyor, documentation/manual, For sale: Okuma MC-800H horizontal machining center. Reliable and powerful CNC machining center with an automatic pallet changer (APC) in good working condition. • Travel (X / Y / Z): 1250 / 1000 / 850 mm • Table / Pallet: 800 / 800 mm (2 pallets), max. load capacity 1,600 kg • Spindle: 10–4,500 rpm, BT50 / NT No. 50 taper, 22 kW motor • Tool magazine: 40 positions (automatic tool changer) • Weight / Dimensions: 23 tons, 4.5 / 6.5 m, height 3.5 m • Control: Original Okuma CNC control panel Fgodps Adrmrofx Am Eji