Steinfeld Srl

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 28,250 kg, total length: 7,500 mm, total height: 3,470 mm, total width: 2,600 mm, working height: 1,100 mm, stroke length: 365 mm, type of input current: three-phase, pressing force: 320 t, input voltage: 400 V, working width: 6,000 mm, feed rate X-axis: 21 m/min, feed rate Y-axis: 8 m/min, back gauge speed R-axis: 250 mm/s, power: 37 kW (50.31 HP), oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Durma AD-R 60320 CNC press brake / panel bender For sale: a Durma AD-R 60320 CNC hydraulic press brake, manufactured in 2022. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Manufacturer: Durmazlar (Turkey) – Serial number: 73672218668 Year of manufacture: 2022 Bending capacity: 6,050 mm x 320 tons Stroke: 365 mm Dimensions: 7,500 x 2,600 x 3,470 mm (L x W x H) Weight: 28,250 kg Bledsz E Sm Iopfx Aknsn Motor: 37 kW, three-phase, 400V, control voltage 24V Hydraulic oil tank: 250 l CNC touchscreen control with automatic bending sequence programming Complete with a full set of Eurostamp tooling: punch 1311 (full length 6,000mm), punch 1310 “goat’s foot” (4,000mm), dies 3077/3082, and Multi-V Includes an extra gripper for parts with a minimum length of 200mm, and vacuum suction cups for part handling CE marked, photoelectric safety barrier For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any question or send further photos/videos of the machine in operation.

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Bljdpoz Aiqzefx Aknon Key information: Manufacturer: FICOM Model: PBH-63T/3200 Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: HorizOne50_4, overall weight: 1,500 kg, tool height: 300 mm, operating speed: 10 mm/s, total length: 1,850 mm, total height: 1,250 mm, total width: 850 mm, reverse speed: 40 mm/s, working height: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, table height: 1,000 mm, stroke length: 250 mm, pressing force: 50 t, length stop: 1,000 mm, working width: 300 mm, lifting speed: 10 mm/s, bending force (max.): 50 t, warranty duration: 36 months, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. Blsdpfx Akozyl Hmsnon 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D control system. Automatically controlled side stop for convenient processing of your sheet metal parts from individual part production to series production.

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2520 CNC sheet metal bending machines are characterized by their high flexibility, efficiency, precision, and a high degree of automation. They are suitable for processing housings, doors, and other components. They are widely used in industries such as kitchen appliances, control cabinets, power electronics, elevators, etc. Technical data: - automatic tool change - bending length: 2500mm - maximum sheet width: 1500mm - max. diagonal length: 2800mm - max. bending height: 200mm - max. material thickness: stainless steel 1.2mm / aluminum 3mm / structural steel 2mm - min. sheet thickness: 0.35mm - possible angles: 0°-180° - inner radius: 0.8-1.2 - Dimensions: 5.4m x 4m x 2.9m - Weight: 19500kg - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hanover and will be available from October. Bedpfxezyadyo Aknoln We have been distributing YAWEI machines throughout Europe for more than 20 years. Service and spare parts supply are provided by H+S, all from a single source.

Condition: used, Year of construction: 2001, Robust hydraulic horizontal bending machine for the precise bending of flat, round, and square steel, as well as various profiles. Suitable for workshops, construction companies, and industrial applications. Specifications: Brand: Stierli-Bieger Type: 300 HE/CE Bending force: 300 kN (30 tons) Bjdpfxjzrzlvo Aknoln Hydraulically powered Suitable for various bending tools Heavy-duty steel construction In good, working condition Includes tools!

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 tons Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Bjdpfxjzdfb To Aknoln Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 pieces EQUIPMENT Documentation CE marking

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools Bodpfjy Uwhbjx Aknjln - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) Bsdpfoyy Hgqex Aknoln :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: as good as new (ex-display), Year of construction: 2025, Used horizontal bending machine Digibend 400 CNC with back gauge L=1250 and 22" LCD touchscreen monitor, USB ports as well as integrated UPS DigiSoft software – demonstration machine – The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 2025 Max. press force: 400 kN / 40 t Max. stroke: 245 mm Max. working speed: 9.6 mm/sec Min. working speed: 4.8 mm/sec Return speed: 62 mm/sec Average speed: 35.8 mm/sec Storable programs / sequential bends: 50+5 (punching) Number of single bends / sequential bends: 16 Worktable dimensions: 580 x 1230 x 925 (H) mm Tool fixing holes in worktable: 4 x Ø 80 mm Working height: 925 mm Blodpfx Aeyw Rxfsknsn Oil tank capacity: 40 l Motor power: 5.5 HP / 4 kW Connections: 380 V / 50 Hz Bending height: 200 mm Extra-high bending height: 400 mm Shearing max. capacity 40 kg/mm (mild steel): H=150 x 10 (thickness) Punching max. capacity 40 kg/mm (mild steel): Ø 30 x 10 (thickness) Straightening: 200 mm Two-jaw bending: Ø 60 mm Rotary bending: Ø 50 mm Automatic CNC back gauge: 1250/2000 mm Weight (approx.): 700 kg Dimensions: 580 x 1230 x 1150 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2516 CNC sheet metal bending machines offer high flexibility, efficiency, precision, and a high level of automation. They are suitable for processing enclosures, doors, and other components. These machines are widely used in sectors such as kitchen appliances, control cabinets, power electronics, elevators, and more. Bsdpjyvzq Aofx Aknjln Technical specifications: - Automatic tool change - Bending length: 2500 mm - Maximum sheet width: 1500 mm - Maximum diagonal length: 2800 mm - Maximum bending height: 165 mm - Maximum material thickness: stainless steel 1.2 mm / aluminum 3 mm / mild steel 2 mm - Minimum sheet thickness: 0.35 mm - Possible bending angles: 0°-180° - Inside radius: 0.8–1.2 mm - Dimensions: 5.4 m x 4 m x 2.9 m - Weight: 19,500 kg - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hannover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply by H+S – everything from a single source.

Condition: used, sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m Bodpfoyuql Sox Aknoln

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Bjdpfxjx Sw Sus Aknsln Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20960 € 402.43 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm 1250 mm 900 mm Bodpfx Aksxh Rulenoln 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible Bjdpfx Aksxabhmenjln - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible Bjdpfx Ajxabhaoknsln - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: new, Year of construction: 2023, Horizontal bending machine AH 20 with backgauge - ZOPF - with semi-automatic control - hydraulic pressure 20 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 2,2 KW Blsdpfxowyt Tqj Aknjn - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x12 mm round tube up to 48 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 21900 € 420.48 € 80 to 285 mm 300x25 mm 750x1425 mm 300 mm 105 mm 10 mm/s 10 mm/s 10 kW 930 mm 1430 mm 750 mm 1450 mm 1700 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal Blodpfewiqrcox Aknon OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. - length of stroke Bedpfxsqvm Ukj Aknjln - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: new, Tubend Horizontal Bending Machine HP 40 Pressure: 40t Stroke: 300mm Max. tool height: 250mm Flat bar, over the high edge: 200 x 24mm Flat bar, over the high edge: 250 x 16mm Working speed: 10.0mm/sec Return speed: 10.0mm/sec Table: 600 x 1200mm Total power consumption: 4 kW Motor: 400 Volt 50Hz Weight: 1190 kg Dimensions L-W-H: 1250 x 650 x 1300mm Approximate oil capacity: 40.0l Features: Hydraulic horizontal bending machine Solid work surface made of stabilized steel Machine made of hardened and ground forged steel Blodpfx Aksi Elunjnon NC touch screen control 1 x tool set Dual foot switch

Condition: excellent (used), For sale, we offer a Hauxia bending machine. This is a demonstration machine that was used for prototypes in our production hall. Therefore, it has very few operating hours. The bending machine is sold with tools. See photos. Technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Rapid traverse speed: 150mm/s Return speed (upward): 100mm/s Control axis (8 + 1 axis): Z1, Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control system: Delem-DA-66T (multilingual) Operating manual: English Blodpfx Aeixl Tgsknsn Special net price: €19,000 Inspection possible by prior arrangement. Location: 89-600 Chojnice If interested, please contact us.

Condition: new, Year of construction: 2026, Stierli bending machine 420HE Horizontal bending machine, with bending force of 42 tons tool height of 200 mm stroke of 0-310 mm, stepless bending capacity of 200x24 mm St40 straightening capacity for HEB180 Bodpfx Aksid Izksneln Bending and straightening program via selector switch Exhibition machine, year of manufacture 2024, incl. hand-held control and foot pedal Wear-resistant machine table Machine in new condition

Condition: new, Year of construction: 2026, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 660x1250 mm Blodpehgihkjfx Aknen Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: new, Year of construction: 2026, Horizontal bending machine T 1000 Multi - ZOPF - with semi-automatic control - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 10 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate Bsdog Anurjpfx Aknjln - weight 2300 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 300x32 mm (V200) round tube 3/8" - 3"

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Blodpfxegqfmnj Aknon Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2023, tool height: 200 mm, bending angle (max.): 180 °, pressing force: 42 t, sheet thickness (max.): 30 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420 CNC Horizontal bending machine, with Siemens controler Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Bljdjgqflqjpfx Aknjn Demonstration machine year 2023 incl. hand and foot pedal Horizontalbendingmachine as good as new Please contact us for more information for this horizontal bender.