HD Holzbearbeitungsmaschinen GmbH Dresden

Condition: good (used), Year of construction: 2005, Used edge banding machine Hebrock EURO 2000, year of manufacture 2005, with hot-melt adhesive application onto the workpiece, suitable for edge material up to 3 mm, maintenance-free, coated glue pot, HF cross-cutting station (300 Hz) for front and rear edge overhang, HF milling station (300 Hz) with interchangeable insert cutter (combination design) and fine adjustment from the operator side, ergonomically arranged control panel, extendable workpiece support, feed rate approx. 10 m/min, heated infeed fence, separate pneumatic milling adjustment (straight/radius), running gear. Djdpfx Aox Sxcnjddecb

Condition: used, machine/vehicle number: 008244, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Djdex Swgfepfx Addjcb

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Dsdpfx Ajx Swf Usddjcb Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: used, machine/vehicle number: 008367, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Dodpfx Aex Swfhsddscb

Condition: used, machine/vehicle number: 008371, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Dcedpfjx Swfbex Addjb Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008363, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Djdpfx Adsx Swddedocb Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008383, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Dcjdox Swcgepfx Addsb Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Dedpsx Sttujfx Addocb Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: ready for operation (used), Year of construction: 2013, Tools Max tool length 5760 mm Additional Equipment Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade Dsdsx Stmbepfx Addjcb This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types Edge Banding

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Service station Homag XES 200 Preheating and cleaning station for the QA65N application unit 2 vacuum containers, each for one QA65N application unit or one PUR melting unit 2.5 kg/h No vacuum pump (Venturi nozzle) or nitrogen required Dsdpfxjx Staue Addscb

Condition: good (used), Year of construction: 2022, POWERTOUCH 15.6" Workpiece thickness: 8 - 60 mm Edge material roll: 0.3 - 3 mm Feed rate: 11 m/min Dcedpfx Adsx Srvzsdob Jointing milling unit End trimming unit Milling unit Profile milling unit Profile scraper Glue joint scraper Polishing unit Machine from company closure Free loading onto truck Data sheet attached

Condition: excellent (used), Edgebanding Machine Advantage 4612F - Regularly maintained, year of manufacture 2002 - Overall length: 6000 mm - Width: 2400 mm - Height: 2300 mm - Weight: 3100 kg - Feed speed: 12 m/min - Workpiece dimensions: width 65 mm, max. thickness: 45 mm, min. thickness: 10 mm, length: 150 mm, edge height 55 mm, pressure 7 bar - with two interchangeable glue pots Dcsdpfx Adex Srp Iodjb - Pre-milling, flush cutting, multifunctional unit, profile & surface scraper, buffing unit

Condition: used, Year of construction: 2012, Year of manufacture: 2012 Maximum edge band thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roll material: 3 mm Minimum workpiece width: 70 mm Max. feed rate: 18 m/min Feed rate infinitely adjustable Motorized height adjustment Granulate glue application system with motorized adjustment Pre-melter BRANDT QUICKMELT KD glue system Strip loader Milling unit End trimming saw unit with 2 motors Leveling/radius/bevel station – 1 station Corner copying unit with 2 motors Scraping unit Profile scraper, flat scraper Polishing unit Units with sequential operation NC axis Right-side execution Machine length: 5,760 mm Dcjdex Sa Daspfx Addjb CE conformity mark Description errors may occur during transcription.

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm Dcedpex R E Nfjfx Addjb This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for tact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Edgebander Homag Edgeteq S-300 / Optimat KDF 440 C AirTec Pre-milling unit Gluing unit with Airtec system 2 glue reservoirs 2 vacuum tanks Touch screen control panel Dsdpfsx R Ep Sex Addecb Infeed table with air cushion End trimming unit Trimming unit Corner rounding unit Glue scraper Edge scraper Cleaning brush Very good condition

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW With quick-heating glue reservoir Dcedpjx Rr Dvofx Addeb Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Outrigger, foldable and extendable to the front With chassis L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Single edge feeder Automatic transport for coil and strip material - Glu Jet GJ 301 adhesive application system Automatic glue height adjustment (sensor nozzle) - Pressure unit 1912-3 pneumatic - End trimming unit 1918 (60 mm) pneumatic - Extraction hoods for end trimming unit - Multifunctional milling unit FR 201 - Corner rounding unit 1832 for edge thickness up to 3 mm Djdpfx Adex Rpf Rodocb - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4–6 mm Feed speed: 10 m/min Total length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 2018, Available after alignment of the panel: from the operator to the left Max. edge banding thickness: 3 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 40/60 mm Dcedpfx Adex Rdm Aodob Min. workpiece width: 80 mm Min. workpiece length: 190 mm Feed speed: 10 m/min Heating time: 5 min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter, diameter: 100 mm, height: 48 mm Adjustment of infeed fence: manual Guillotine up to: 3 mm Individual edge feeding: possible Gluing: glue contact roller PUR gluing: possible Cut-off saw: Yes Combination unit flush/chamfer/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Scraper: Yes, with sensor Aggregate display: on the display Control type: PLC line control Operation: touch screen Motor power: 12 kW Travel device: Yes Extendable roller support: Yes Protective hood: Yes Weight approx.: 1250 kg Extraction diameter: 80/140 mm Including additional change-over glue pot Location:

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Edge banding machine - pre-milling unit - gluing unit Dcsdpfx Adox Rcw Hedjb - sawing unit - milling unit - scraping unit - glue scraping unit

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Edge banding machine - R0.03.61 composition "T-ER1" - 62.15.01 "AUTOSET" Dcsdpfxex Rcu Ee Addsb - 62.14.93 Pre-heating panel - 62.12.03 Anti-adhesive unit "AAR" - Rectification unit "RT-V1" - 62.15.06 Glue pot "SGP-E" - 62.13.49 Sawing unit "K-2 radius" - 62.15.02 Nesting kit - Milling unit "R-K" - Corner rounding unit "ROUND 1" - Belt scraping unit "RAS-V" - 62.12.61 Spraying unit for band finishing - 62.15.04 Glue scraping unit "RC-N"

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, total height: 3,140 mm, working height: 1,000 mm, Curved edge banding machine Optimat KTD 820 for sale, in very good condition Technical specifications: • Year of manufacture: 2004 • Table height with suction cups: 1000 mm • Vacuum pump: 6 m³/h • Workpiece thickness: 16–40 mm • Min. workpiece width: 100 mm • Min. edge length: 250 mm • Edge height: 20–45 mm • Edge thickness: 0.4–3 mm • Glue pot capacity: approx. 0.5 l • Working temperature: 140–220°C • Feed speed: adjustable Dcedpfx Asx N S Ifjddjb • Machine height: 3140 mm • Transport height: 2000 mm

Condition: ready for operation (used), Year of construction: 2009, This STEFANI Solutions 86 edgebander was manufactured in 2009. It features Nordson equipment, a maximum glued edge thickness of 25 mm, and a maximum panel thickness of 60 mm. The machine includes electric height adjustment, upper belt pressure, and a preheating zone. It also boasts interchangeable roller storage with 12 positions and a replaceable glue pot. Consider the opportunity to buy this STEFANI Solutions 86 edgebander. Contact us for more information about this machine. Djdpfx Adex Nr Rasdscb Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements depth 8260 mm This BRANDT KDF 991 edgebander was manufactured in 2008. It is designed for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 991 edgebander. Contact us for more information. Dcsdpfsx Nr Hnox Addsb Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2003, Brandt Edge Banding Machine Type: Profi KDF 670 Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application. Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations. Infrared hot-melt glue activation Automatic edge magazine for coil material for thick PVC/ABS Heavy-duty pressure zone Centrally adjustable top pressure Operating panel at machine infeed PC 16 electronic control Technical Data: Edge thickness: 0.4 - 8 mm Roll cut, max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tool set R = 2 mm (exchangeable for R = 3 mm) Quickmelt gluing module Motor-driven height adjustment for top pressure - PC 16 Adjustable infeed fence Program-controlled adjustment for infeed fence Dodpfx Adjx Nrtnodecb Additional unit for laminate overhang Program-controlled pressure zone Release agent application for workpiece Jointing milling unit Jointing cutter set, Dia End trimming unit with chamfer/straight cut 0 - 15 degrees Pneumatic adjustment for end trimming unit, chamfer/straight Flush milling unit Pneumatic adjustment for milling unit Pneumatic two-point adjustment for vertical tracing rollers Jointing unit 0 - 25 degrees, synchronous flush milling Radius cutter set (exchangeable for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment for side tracing rollers Profile milling unit above and below - For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment for scraper Flat scraper glue joint Cleaning agent application for workpiece Buffing unit, 2 motors Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15 Weight: 3000 kg Total connected load: 15 kW Length: 5880 mm Location: ex-site customer - Immediately available - System must be dismantled by the buyer

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2128, feed rate X-axis: 18 m/min, workpiece height (max.): 65 mm, edge thickness (max.): 15 mm, warranty duration: 12 months, HOLZ-HER Edge Banding Machine SPRINT 1329 multi, year of manufacture 2025, ex works delivery - Motorized pressure bridge adjustment - iTronic – automatic pressure and glue quantity control Dedpex Nqn Refx Addscb - Motorized adjustment of the infeed fence 1350 mm - Automatic chain lubrication - Vertical bottom nesting shoes - Edge-Control PPC 322W control unit with 21.5" color touchscreen - ECO-MODE energy-saving mode - Pre-milling unit FG501 with 2 milling aggregates - Glue application system GlueJet GJ725 for EVA and PUR in cartridge and granule form, swiveling 90 degrees - Storage chute for 1.5 kg EVA granulate - Motorized pressure unit D501 - End trimming unit KA501 - Milling unit FR701 Mot6 multi - Profile milling unit FF701 with 100% repeat accuracy - Scraping unit ZT502 Mot6 multi with motorized 6-axis adjustment - Surface scraper FK701 - Spray unit TR501 for infeed and outfeed - Spray unit GM501 after pressure unit for high-gloss edges - Buffing unit SW501 - Delivery time: immediately available