JDL Machines

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: Lotze Guillotine Shear Type K 20 TS 2000 x 3 Year of manufacture: 1980 Cutting length: 2000 mm Giedpfx Ajy R N S Djf Sst Material thickness: 3 mm Drive: 5 kW Back gauge: 750 mm Weight: 3,200 kg Price: EUR 1,500 plus VAT, ex works

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see nameplate, up to 3mm steel; significantly more for aluminum - Working length: just over 2 meters - Manual backgauge approx. 750 mm / a 1000 mm backgauge is equipped with digital display - Side/angle stop - Extension arm up to 2 meters - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal - Weight approx. 1.3 t We also have other machines available, such as the Schechtl MAX 200 – 2.5mm, or Schechtl MA 200 – 2mm and HA series, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears by RAS, etc. The current net new price is approximately 25,000 EUR. You will receive an invoice with VAT shown separately; VAT is included in the invoice amount. Shipping can be arranged if requested. Forklift available on site. Free loading as shown in the pictures. Viewing and test run possible by phone appointment. Payment in cash upon collection. If there is anything else I can assist you with, please give me a short call – thank you. Gsdpfsy R Efajx Af Seit Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number Schröder MHSU 2m 3mm 260511

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design Gijdpfx Ajy Raitof Sot - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual

Condition: good (used), Year of construction: 2007, sheet width 2050 mm plate thickness 4.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1380 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm current new price approx. 25.000 euros from a maintenance workshop Godpey Nd Ttjfx Af Sjit Equipment: - robust / powerful electro-mechanical guillotine shears - electro-motorized material / backgauge * Movement possible via electric button * Infinitely variable adjustment range * Digital position indicator "EZM-9910" - Manual cutting gap adjustment, from the front - Ball rollers in the support table - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - Rear safety guard (safety grid) - Operating instructions (machine control)

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Godpfoy Hlyvox Af Ssit Stand throat depth: 200 mm

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 2050x4, control type: CNC control, degree of automation: manual, actuation type: mechanical, working width: 2,050 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, Used guillotine shear by Vimercati, model 2050x4, year of manufacture 1997 Gisdpfx Aey Hhqkef Sot

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 3000x10, control type: CNC control, degree of automation: manual, actuation type: mechanical, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, Used machine guillotine shear manufacturer Vimercati type 3000x10 year of manufacture 1997 Godpfx Ajy Hhkkef Ssit

Condition: used, functionality: fully functional, Year of construction: 1999, control type: CNC control, working width: 3,190 mm, sheet thickness steel (max.): 6 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, overall weight: 6,800 kg, We offer you the opportunity to acquire a high-quality guillotine shear from the well-known brand RAS POWERcut. This powerful machine is ideal for professionals involved in sheet metal processing who require the highest levels of precision and efficiency. Product details: - Model: Powercut 86.33 - Year of manufacture: 1999 - Condition: used - Technical specifications: Weight 6,800 kg Gijdey Enhtspfx Af Sot Width: 3,830 mm Cutting length: 3,190 mm Max. sheet thickness: steel 6 mm Back gauge depth: 5 – 1,000 mm If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2012, working width: 3,000 mm, sheet thickness (max.): 16 mm, overall weight: 14,600 kg, capacity 3000x16 mm, weight 14,600 kg Gjdpfx Afjy Egl Rs Seit

Condition: used, Year of construction: 1974, total length: 1,700 mm, total width: 1,400 mm, total height: 1,200 mm, Colour: Grey Weight: 1.000 kg Gjdoyvz Hwspfx Af Ssit - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 72 - Drive system: Conventional - Drive type: Mechanical - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1050 - Backgauge depth [mm]: 500 - Transport dimensions: 1700mm x 1400mm x 1200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 1988, Used guillotine shear from Jorg Type: 4052 Capacity: 1300 x 4 mm Electric back gauge Giedpoyu H Rdefx Af Sst Year of manufacture: 1988

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Godpfoyuzcuox Af Sjit Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity 1000 x 3.5 mm Gijdpfjyr Sg Eex Af Sjt - electric foot switch - side stop left 600 mm, two supports each 600 mm - central lubrication - Ortlinghaus brake-clutch combination - pneumatic tilting roller table or lifting with plastic rollers - rear stop area protected by light barrier - operating instructions

Condition: used, Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stops and table extensions Gijdpoyrnviofx Af Sjt knife sharpened 1700 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: PLC-controlled, Equipment: CE marking, documentation/manual, type plate available, Capacity: 4100 x 6 mm. Stroke: 120 mm. Control: DURMA DT-7. Serial No.: 608922260. Dimensions: 5230 x 3600 mm. Height: 2150 mm. Weight: 11,460 kg. Gsdeyrdfajpfx Af Soit

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: manual, actuation type: mechanical, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 775 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 3,000 kg, Equipment: angle stop, finger protection, foot remote control, type plate available, Mechanical guillotine shear in very good condition! Capacity: 2050 x 4 mm. Easy operation. Electromechanical backgauge 6–775 mm. Light curtain behind the machine. The machine was originally delivered to Norway and was therefore electrically converted from 3x230 V / 27 A to 3x400 V / 16 A. Conversion back to 3x230 V is possible. Transport can be arranged. Loading onto a truck is included in the price. Giodpfx Asyqpbwof Sjt

Condition: used, functionality: fully functional, Year of construction: 1986, operating hours: 1,301 h, machine/vehicle number: 252 2000 2, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: -, controller model: -, working width: 2,050 mm, cutting angle (min.): 3 °, cutting angle (max.): 6 °, stroke rate (min.): 30 1/min, stroke rate (max.): 60 1/min, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 5 mm, table height: 900 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, back gauge speed R-axis: 100 mm/s, input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 24 V, overall weight: 6,000 kg, total length: 2,300 mm, total width: 2,800 mm, total height: 1,800 mm, number of support arms: 3, year of last overhaul: 2025, Equipment: angle stop, centralized greasing system, emergency stop, finger protection, foot remote control, type plate available, Guillotine shear for sale due to workshop relocation. - For up to 6mm steel, 5mm stainless steel, up to 2050mm cutting length Gisdpoynzq Ejfx Af Sst Cutting capacity, angle and gap adjustable - 2 pairs of blades, central lubrication, electronic back gauge up to 1000mm, simple mechanism, with sheet offcut trolley, 6 tons weight, 32A plug, left cutting cylinder newly resealed. Machine is dry. Cutting gap and angle adjustable. Available immediately No warranty or returns. VAT can be shown separately.

Condition: good (used), functionality: fully functional, GATTI SHEAR 2000 x 3/4 USED MACHINE Giedpfsyi Ehdsx Af Sst INTERNAL CODE: SVR 375

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 16600 € 318.72 € 1050 mm 6 mm 30 1/min 2.3 ° 750 mm 7,5 kW 800 mm 530 mm 1355 mm 1720 mm 1630 mm 1230 mm 2000 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Gedpfxsyg N S Uj Af Seit Rear light barrier protection

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei Gisdsyg N Szopfx Af Sjt 19800 € 380.16 € 1550 mm 6 mm 30 1/min 2.3 ° 750 mm 7,5 kW 800 mm 530 mm 1855 mm 2220 mm 1630 mm 1230 mm 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 2,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, emergency stop, finger protection, foot remote control, Standard Features - ELGO P40T CNC control unit - Robust, welded, monolithic frame construction providing maximum cutting precision - NC-controlled, motorized 750 mm backgauge system - Upper blade with 2 cutting edges, lower blade with 4 cutting edges, made of high-alloy steel - Mechanical hold-down system preventing sheet slippage during cutting - Easily adjustable blade clearance adjustment mechanism - Ball transfer front support table - Front support arms with rule - Cutting line illumination system - Finger guard system - Foot pedal - Rear safety guards - Emergency stop button Optional Features - 1,000 mm backgauge system - Rear sheet support and sliding system enabling sheets to be moved and fed to the rear with ease - Drop-down system for cut pieces to fall to the front - Front adjustable angle square, 0–180° - Front support arms in custom lengths - Manual 750 mm backgauge with front adjustable handwheel - Rear safety light barrier Technical Specifications Machine Type: A04/2060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 2,060 mm Cutting Angle: 1.3° Cutting Speed: 41 cuts/min Table Depth (C): 800 mm Machine Dimensions (L × W × H): 2,600 × 2,250 × 1,400 mm Gijdpfsyg Id Aox Af Sst Motor Power: 7.5 kW Weight: 3,000 kg

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 3,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, Standard Features ELGO P40T CNC control unit Robust, welded and monolithic frame structure providing maximum cutting precision NC-controlled, motorized 750 mm backgauge system Upper blade: double-edged; lower blade: four-edged, manufactured from high-alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance system Ball transfer front support table Front support arms with ruler Cutting line illumination system Finger protection system Foot pedal Rear protective cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system for easy positioning and transfer of sheets to the rear System for dropping cut pieces to the front Adjustable front angle gauge 0–180° Front support arms available in custom lengths upon request Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Gijdpfjyg Ic Esx Af Sjt Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 4,000 kg

Condition: used, To ensure the long-term performance, precision, and operational reliability of your sheet metal processing machines, it is essential to carry out regular maintenance, repair, and inspection procedures in accordance with manufacturer specifications and legal requirements. Our qualified service technicians perform these tasks professionally and reliably. These include: • Maintenance work to ensure uninterrupted operation (cleaning, lubrication, inspection and replacement of wear parts) • Repairs in case of malfunctions or breakdowns, including fault diagnosis, refurbishment, and adjustment Gijdpfx Afoygk Eps Sjt • Inspections in accordance with DGUV Regulation 3 and the Machinery Directive to verify safety and performance Upon completion of the work, you receive comprehensive documentation of all measures performed, including inspection reports and recommendations for any required follow-up actions. We will be happy to prepare a tailored quotation or schedule a maintenance appointment based on your specific operational requirements.

Condition: excellent (used), functionality: fully functional, SHEAR SCM 2050 X 4 USED MACHINE INTERNAL CODE: SVR 365 Gjdpfxsxzgyke Af Seit

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch Gsdpfx Aoxyln Rof Ssit - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks