BRAUCKHOFF Fenster und Türen

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Two belt sanding units with a traversing sanding pad (option to use profiled pads). Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Fodpfxszz Rh Se Acmjpl Adjustment of the pad pressure. Adjustment of the sanding belt tension. Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Pressure bar with pressure rollers (new pressure rollers). Additional lateral pressure.

Condition: like new (used), functionality: fully functional, total motor power 14 kW two sanding units plus a milling unit two shoe lasts controlled by a timer Fpjdpfezz Nl Aex Acmjl variable feed speed regulated by variator two sanding belt speeds plus right/left rotation infinitely variable milling speed control via inverter sanding belt air blowing mechanical oscillation CE marking year of manufacture 1999 380 V

Condition: like new (used), functionality: fully functional, Sanding unit with shoe pneumatic oscillation feed speed adjustment via variator: 5–30 m/min maximum working height: 100 mm minimum working width: 10 mm machine width: 2000 mm machine height: 1900 mm power supply: 380 V Fpjdpfxszz Nlco Acmol year of manufacture: 1999

Condition: used, Used machine Equipment and technical data: Fedpfx Aszyy A Ascmepl

Condition: used, LASM belt edge grinder, Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, 150mm wide abrasive belt, Oscillation, Fodpfx Ajzxz Tajcmspl Angle-adjustable table, Used machine, ready for operation.

Condition: like new (used), Year of construction: 2007, total length: 1,700 mm, total width: 900 mm, total height: 1,200 mm, overall weight: 300 kg, height adjustment type: electric, grinding belt length: 2,650 mm, grinding belt width: 150 mm, Volpato edge sander – MADE IN ITALY! - Working height: 150mm - Sanding belt length: 2650mm - Mechanical sanding belt oscillation - Main motor: 2.2 kW - Control panel - Sanding at angles from 5 to 90 degrees - Year: 2007 Fpedpfezxyuvsx Acmjl Machine dimensions: - Length: 1700 mm - Width: 900 mm - Height: 1200 mm - Weight: 300 kg Machine testing is possible on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines available: band saws, circular saws, crosscut saws and panel saws, planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planers, 4-sided, 3-sided, three-sided, two-sided, thicknessers, jointers, sanders, planers, combined planer-jointers, combined planer-thicknessers, combined jointer-thicknessers, thicknesser-jointers, cleaning machines, mortisers, tenoners, parquet machines, trimmers, edge trimmers, machines for log homes, milling machines, routers, spindle mounters, top routers, bottom routers, sanders, wide belt sanders, throughfeed sanders, roller sanders, disc sanders, angle sanders, jointers, drills, drilling machines, horizontal, radial, milling machines, multi-spindle, edge banding machines, edge banders, veneer machines, presses, lathes, sawmills, briquetting machines, chippers, wood chippers, dowel machines, mortising machines, dust extraction systems, extractors, fans, compressors, sharpening machines, multi-functional machines.

Condition: like new (used), Sanding belt height: 200 mm Mechanical oscillation of the sanding belt Raising/lowering of the sanding unit controlled from the control panel Main motor power: 2.5 kW Fsdpfjzxyfnex Acmspl Possibility of sanding using a platen or flat surface Adjustable table angle Capability to sand curved elements 380 V Year: 1998

Condition: used, Year of construction: 1996, functionality: fully functional, Felder FS900K edge sander Sanding belt width: 150 mm Tilting worktable at an angle of 45 degrees Fpodpfx Acjzxw Efjmsl Sanding belt oscillation Motor power: 3 kW Year of manufacture: 1996 Machine dimensions: 147x61x121cm (H)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface Fpsdpfezv Eaxex Acmel 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, Year of construction: 1991, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 290-02-1819, total length: 2,670 mm, total width: 1,500 mm, total height: 1,200 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 380 V, space requirement width: 1,800 mm, space requirement height: 2,000 mm, space requirement length: 5,000 mm, Edge sander, capable of sanding profiled strips on the first unit; the second unit is for flat sanding, and the third unit has a brush. Fpjdpfx Acozvy A Usmsl

Condition: excellent (used), 4 kW motor Roller feed system Fpjdpszu Ng Tsfx Acmjl Sanding belt length: 100 cm Working height: 14 cm Table with adjustable angle and height

Condition: used, Year of construction: 1987, Edge grinding machine Manufacturer: Rehnen Type: R1 Fpodpfx Aezuzddjcmjl Year of manufacture: approx. 1987 Technical data Work table: 1100 x 500 mm Grinding belt: 2280 x 150 mm 3 kW main motor 6.4 Amps Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 Fedezuzb Aspfx Acmopl - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, functionality: fully functional, Felder/Hammer edge sanding machine HS 950 for edge, surface, and contour sanding in woodworking shops. Suitable for finishing workpiece edges, moldings, frames, and wood components. Key technical data - Machine type: Edge sanding machine / oscillating belt sander - Model: Hammer HS 950 / Felder HS 950; according to the inventory note, the model is not clearly identifiable. - Sanding belt dimensions: approx. 2515 x 150 mm - Sanding table length: approx. 950 mm - Sanding belt speed: approx. 17 m/s - Motor power: approx. 2.2 kW - Table height adjustment: approx. 0–150 mm - Sanding unit tilt: approx. 45°–90° or continuously adjustable up to 90° Fedsztxqfopfx Acmjpl - Dust extraction port: approx. 120 mm - Dimensions: approx. 1540 x 530 x 1235 mm - Weight: approx. 165 kg Features - Switchable oscillation for a uniform sanding pattern and longer sanding belt life - A useful addition for clean edge processing and finishing work - Of interest for carpentry shops, training workshops, and woodworking shops No guarantee.

Condition: used, Jet EHVS-80 cs lightweight edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: - Sanding belt length: 2260 mm - Sanding belt width: 150 mm - Table: Swivelling - Motor power: 1.5 kW Fodjzryxhspfx Acmopl - Extraction connection: 100 mm

Condition: used, Loeser S0 profile sander for sanding profiles using templates. The sanding belt is guided over the profile wheel/template, thereby transferring the shape onto the wood, which is fed manually through the machine. Fodpezryxbefx Acmjpl Technical data: - Max. workpiece dimensions (L x W x H): approx. 500 x 300 x 100 mm - Motors: approx. 2 kW each

Condition: used, Technical data: - Conveyor belt width: 150 mm - Motor: 3 kW - Weight: 490 kg Fpedpfx Acjzryw Remol

Condition: good (used), Modular unit, finishing unit, grinding unit, grinding station, belt sander, belt sander, edge sander, edge sanding machine, profile grinding unit, small belt sander -Belt sanding unit: from belt sanding machine -Type: unfortunately no type designations -Drum motor: Perske type DKAL 2117/2 3.7 kW 2840 rpm -Roller: Ø 183 x 370 mm -Rollers: Ø 117 x 325 mm -Individual components: see photos -Transport dimensions: 1110/560/H300 mm Fpsdezrfb Ujpfx Acmel -Weight: 195 kg

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Fpjdpfx Acozq Dczomjl Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: new, Holzprofi Maker oscillating edge sander, a robust sanding machine for trades and industry: - Processed steel back plate - Graphite support - Table made of solid machine cast iron - Table height adjustable and grooved - 90° pivoting sanding head - Miter fence and rounding sanding table included as standard Technical data: Belt dimensions: 2260 x 150 mm Motor output S1: 2.2 kW, 400 V Fpedpfxjzqrwgs Acmsl Table length: 750 mm Table width: 250 mm Belt speed: 16 m/sec Space requirement: 1325 x 570 mm Dust extraction connection: 100 mm Weight: 156 kg

Condition: used, functionality: fully functional, On offer: SAMCO Unilev 150 edge sander – double-sided, working height 150 mm. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its double-sided design, which allows for the use of both sides of the sanding belt. The adjustable platen, two belt speed ranges, and tilting worktable enable sanding of straight edges, angled components, veneered components, and internal curves. Specifications: • Manufacturer: SAMCO • Model: Unilev 150 • Working height: 150 mm • Sanding belt dimensions: 150 × 2150 mm • Sanding belt speed: 2 ranges • Number of worktables: 2 • Worktable dimensions: 220 × 1440 mm Fpedpfjzqan Tjx Acmsl • One worktable adjustable at an angle from 0–30° • Motor power: 3.5/4.5 HP • Pneumatic belt tensioning and oscillation • Adjustable platen for precise sanding, including veneered components • Fixed opposing belt pressure surface: 150 × 750 mm • Attachment with protractor for angled sanding • Additional table with roller for sanding internal curves • Dust extraction port: Ø140 mm • Weight: approximately 450 kg • Overall dimensions: 144 × 72 × 133 cm (L × W × H) Applications: • Sanding straight edges of solid wood components • Sanding edges of glued components and boards • Precise sanding of veneered components • Sanding edges at an angle • Sanding curves and internal profiles • Preparing edges for painting, oiling, or further processing Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-Community supply with a VAT rate of 0%; 23% VAT must be added for domestic sales Financing and transport: • We arrange transport using our MDD fleet or through external carriers • We assist in obtaining leasing or hire purchase financing • The delivery cost depends on the destination and the method of machine transport MDD maszyny do drewna is a company specializing in the sale and service of used woodworking machines. We offer professional advice, technical inspections, repairs, and machine preparation for operation. We support customers both before and during the machine's subsequent use. We regularly update our offer. If you are looking for a machine that we do not currently have, we can help you find and import it. We offer machines from manufacturers such as: SCM, SAC, Martin, Hofmann, Casadei, Kuper, Osama, Altendorf, Casolin, Sicar, Omga, Maggi Junior, Brandt, Felder, Weinig, Olimpia, Impianti, Italpresse, Orma, Manni, Kolmag, Centauro, Meber, Ogam, Cosmec, Unilev, Volpato, Safo, Atlas Copco, Samco, Fini, ABAC, Stema, Stromab, Omec, Bottene, Prodeco, and many others. Contact us for more information, to arrange a machine demonstration, and to find out the transport costs. MDD maszyny do drewna – sales and service of machines for the woodworking industry.

Condition: used, functionality: fully functional, De Stefani MVT edge grinder Fodpfx Ajznu D Recmopl 1 grinding unit Maximum workpiece height: 100mm Grinding unit motor: 2.5 kW Self-sharpening grinding unit Manual adjustment of the grinding unit Manual adjustment of the grinding unit angle Grinding unit with oscillation Feed speed adjustable via a variator Feed motor power: 0.74 kW

Condition: good (used), Code: 0449 Brand: DE STEFANI Model: MV 1 Automatic single-head edge sander for wooden edges and profiles, solid wood, veneered and various Fpedpfx Acszmyp Aemol Sander for profiles and rebates with interchangeable pad, tiltable -15° to +90° 2-speed motor rpm 710/1420 – Hp 1,3 – 2,5 Working height mm 100 Automatic feed with variable speed Adjustable inlet guide Compressed air 6 atm Exhaust outlet diameter 100 mm Overall dimensions mm 2100 x 1600 x 1350 h Weight kg 950

Condition: excellent (used), maximum belt width 240 mm mechanical oscillation cast iron housing dimensions of the side table: 800x450 mm Fodpfxozmwdde Acmepl two motors, 4.5 kW each manual adjustment of the unit spacing

Condition: excellent (used), !!!DEMO MACHINE!!! Fpedpfjzl Ti Tex Acmol For sale is a Wesetslintner edge grinding machine, model KSMO-1, with a grinding belt length of 2600 mm. The machine is in very good condition and has been inspected by our qualified personnel. Technical data: - Belt length 2600 mm - Table area 930 x 330 mm - Motor with 2.2 kW / 3 HP - Belt width 150 mm - With oscillation - Dust extraction connection 120 mm - Weight 270 kg - Robust design - Made in Austria - Free delivery within Austria The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Grinding machine, edge grinding machine, edges, KSM, KSM 260 Reference: A0117-9998