IJZERON Machinehandel

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 50 t, working width: 1,200 mm, number of axes: 4, overall weight: 4,750 kg, total length: 2,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 8 kW (10.88 HP), input voltage: 400 V, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, foot remote control, For sale: Used TRUMPF TrumaBend V50 press brake, year of manufacture 1997. The machine is in excellent technical condition and is highly reliable. Very precise and repeatable. In February 2024, all valve seals, safety valves, and hydraulic oil with filters were replaced by authorized service. Rcjdpfxsx Rcf De Agzsk The machine has a very low number of operating hours. Equipped with wiring for ACB sensors. Hydraulics: Hoerbiger Tool type: hydraulic Wila / Trumpf Control unit: DELEM DA65 Number of axes: 4 - Y1, Y2, X, R Number of back gauge fingers: 4 Machine number: 881125 Model: TrumaBend V50 Year of manufacture: 1997 Maximum pressing force: 500 kN Working length: 1200 mm Power: 8 kW Voltage: 400 V Hydraulic system pressure: 290 bar Weight: 4750 kg Overall length: 2500 mm Overall width: 2000 mm Overall height: 2100 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, controller manufacturer: Delem, bending force (max.): 50 t, working width: 1,500 mm, stroke length: 215 mm, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.5metre Press Brake For Sale Brand: Trumpf Redex Nip Hopfx Agzsck Type/Model: Trumabend V 50 Year:2000 Trumabend V 50 Technical details Capacity: 50ton x 1.5metre: Folding length: 1500 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, controller model: Cybelec DNC 60, bending force (max.): 50 t, working width: 2,050 mm, Equipment: foot remote control, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 50 t Bending length: 2,050 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R Control unit: Cybelec DNC 60 Rjdpfx Agsx I D E Hozock Weight: 7,000 kg EQUIPMENT Foot pedal Hydraulic upper tool clamping 2 manually adjustable backgauge fingers Tooling

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,763 h, General Data Measurements width 1580 mm Measurements depth 2100 mm Measurements height 2545 mm Machine weight 5400 kg Main Drive Rcjdpfsx D Nqksx Agzjk Pressing force 600 kN Bending length 2100 mm Number of axis 4 Movement X-Axis Movement 1000 mm This 4-axis Baykal APHS 21060 press brake was manufactured in 2021. It features a pressing force of 60 tons, a bending length of 2100 mm, and a stroke of ram at 210 mm. With a throat depth of 410 mm and a distance between columns of 1600 mm, it's designed for precision. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 21060 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4500 kg Rcodjx D Nnvjpfx Agzjk Main Drive Pressing force 500kN Stroke 200mm Additional Equipment Robot Motoman This AMADA HFBO 50 20 press brake was manufactured in 1996. It features a maximum pressing force of 500kN and a stroke up to 200mm. Operating on 400V 50Hz with a power requirement of 6kW, it weighs 4500kg. Consider the opportunity to buy this AMADA HFBO 50 20 press brake. Contact us for more information. Application Types Bending

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Please request further details and photos. We can purchase your faulty press brake. Redpfxox Dr Dao Agzjck

Condition: used, Technical specifications: Pressure: 50 t Bending length: 2000 mm Equipment: - Back gauge Rcedpfx Agjx A Afrszsk - Emergency stop button - Foot control

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,300 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, working width: 1,200 mm, Technical Details: General Information Manufacturer: Durma Model: E 1240 Year: 2008 Application: Bending Machine Type: Hydraulic Press Brake Number of Axes: 4 Control Unit: CYBELEC DNC 880S Capacity & Movements Bending Length: 1200 mm Stroke: 160 mm Machine Dimensions Depth: 1500 mm Redsxzi Nbepfx Agzsck Height: 2400 mm Weight: 2900 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 100 h, machine/vehicle number: C121052, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 44 t, working width: 1,300 mm, stroke length: 270 mm, distance between stands: 1,230 mm, installation height: 470 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 4, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 2,400 kg, total length: 2,350 mm, total width: 1,220 mm, total height: 2,100 mm, power: 5 kW (6.80 HP), input current: 32 A, warranty duration: 36 months, pressing force: 44 t, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Compact Electric Press Brake C12 CoastOne - Made in Finland Press force: 44T Bending length: 1300mm Spindles: 2x22T Control: TC15-2D Graphic Backgauge: 2-axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam Rsdpfoxx R Hiox Agzjck 1x set of bending tools included 36-month warranty after installation Delivery not included; available immediately Inspection under power is possible at any time by appointment!

Condition: refurbished (used), Year of construction: 1979, For 75T working length 2500mm Rcedpfx Asxwxg Ijgzok

Condition: used, functionality: fully functional, Year of construction: 1995, machine/vehicle number: 95/230/004, control type: CNC control, actuation type: hydraulic, bending force (max.): 50 t, working width: 2,500 mm, stroke length: 2,002 mm, throat depth: 170 mm, number of axes: 3, table height: 1,030 mm, type of crowning: fixed, travel distance X-axis: 500 mm, total length: 3,100 mm, total width: 1,700 mm, total height: 2,350 mm, Equipment: emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, For Sale: Edward Pearson 60-Ton Press Brake £2750 Rcjdpfx Ajxupyyegzok We’re offering a well-maintained Edward Pearson press brake with a 60-ton capacity and a 2.5-meter bed. This machine comes complete with upper and lower tooling and is in good working condition. It’s been regularly serviced, ensuring reliability and performance. Can arrange video call to view if needed Reason for Sale: We’ve upgraded to a newer model, so we’re selling this reliable machine. COST £2750

Condition: good (used), functionality: fully functional, Year of construction: 2004, The machine is in good technical condition. Nominal forming force: 65t Working length: 2550mm Weight: 5500 kg Inspection in operation is possible by prior arrangement. Rcodsxtqvmspfx Agzok

Condition: used, 🔧 Technical Specifications Year of Manufacture: 1989 Pressing Force: 60 tons Maximum Bending Length: 3100 mm Stroke Length: 100 mm Distance Between Uprights: approx. 2600 mm Rcedoxtn H Nspfx Agzjk Throat Depth: 200 mm Maximum Opening Between Table and Upper Tool: 280 mm Working Speeds: Approach: 80 mm/s Working Stroke: 11 mm/s Return: 70 mm/s Backgauge: CNC controlled Control Unit: CNC (Robosoft Synchro+ / original control – to be confirmed with the seller) Machine Dimensions (L × W × H): approx. 3.28 m × 1.20 m × 2.24 m Weight: approx. 4,500 kg Power Supply: 380 V Tooling is included.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller model: TASK SK 12, bending force (max.): 50 t, working width: 2,550 mm, stroke length: 250 mm, throat depth: 405 mm, distance between stands: 2,120 mm, operating speed: 200 mm/s, number of axes: 4, table height: 910 mm, back gauge adjustment: CNC-controlled, back gauge: 600 mm, overall weight: 6,700 kg, total length: 3,540 mm, total width: 1,560 mm, total height: 2,800 mm, Hydraulic press brake SCHIAVI Mod.HFBs 2550 X 50 TON CNC 4 axes Used item, "CE" certified. Year of manufacture: 2006. Refurbished machine. Immediate delivery while stocks last. Excellent condition. User and maintenance manual included. General Features CNC TASK SK12 – NEW. No. 04 controlled axes (Y1-Y2-X-R-). New DSP LASER front safety light curtains. New foot pedal. Complete overhaul of cylinders. Deflection compensation system. No. 4 rear backgauge stops. Rcedpfxoxtfuqs Agzok Bending force: 50 tons. Bending length: 2550 mm. Distance between uprights: 2120 mm. Throat depth: 405 mm. Clearance: 450 mm. Y axis stroke: 250 mm. Approach speed: 200 mm/sec. Dimensions: 3540 x 1560 x 2800 h (mm) Approximate weight: 6700 kg Motor power: 5.5 kW

Condition: used, Year of construction: 2000, pressure 60 t chamfer lenght 2050 mm distance between columns 1550 mm throat 255 mm stroke 165 mm dayligth 475 mm working feed 9,8 mm/sec return speed 117 mm/sec ajustment speed 150 mm/sec total power requirement 5,5 kW weight of the machine ca. 5000 kg dimensions of the machine ca. 2300 x 1500 x 2470 mm Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping Rsdpjxrgv Hjfx Agzock - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used press brake by Darley Rcjdpfx Agexq Dfvozsk Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used small press brake from Safan Model: UCK 50 1250 Rcodpfx Asxp Rg Rjgzek Capacity: 1250 x 50 tons Year of manufacture: 1990 Y1, Y2 and X axes (manual) 1 set of tools

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Rcodpfx Agjxpqy Dozek Weight 5,000 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 1998, Used Baykal press brake Type: APH 2604 X 60 Capacity: 2500 x 60 tons Rcodpfoxnqdmox Agzsk Electric backgauge Electric depth adjustment 1 set of tools Year of manufacture: 1998

Condition: new, Year of construction: 2025, control type: CNC control, bending force (max.): 63 t, working width: 2,000 mm, travel distance X-axis: 550 mm, back gauge adjustment: CNC-controlled, back gauge: 550 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Brand new 3-axis CNC-controlled press brake with automatic bending angle calculation and color graphics. Maximum pressing force: 630 kN = 4 mm steel sheet S235jr bent along the entire bending length with a V-width of 36 mm Maximum bending length: 2,000 mm Distance between side frames: 1,320 mm Rcodpfxsxdiyre Agzek Throat depth in side frames: 250 mm Ram stroke length: 100 mm Maximum installation height: 320 mm Ram travel speed downwards: 50/6 mm/sec, upwards: 60 mm/sec Table width: 160 mm Back gauge adjustment range: 550 mm Oil tank capacity: 250 liters Dimensions approximately 2.6 x 1.5 m x height 2.4 m Drive power: 5.5 kW Weight: approx. 3,500 kg Equipment: - Die block - Bending punch

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Fasti CNC pressbrake Model 904 - 50/20 Year : 1995 Capacity : 2050 mm. x 50 tons CNC control : Delem DA 23 e - 6 axis 2 hand control and footpedal Front arms Angle punch : 2000 mm. in segment Gooseneck punch : 2000 mm. in segment Gooseneck punch : 1000 mm. V die : 10 - 15 - 22 mm. in 2000 mm. Rcjdpfsxdahgox Agzjk V die : 30 - 40 mm. in 1000 mm.

Condition: used, Year of construction: 2004, pressure 50.0 t chamfer lenght 1275 mm distance between columns 1040 mm column arm 250 mm ram stroke speed 225 mm/sec work speed 0 - 9.8 mm/sec return speed 160 mm/sec work stroke 215 mm dayligth 512 mm table height 800 mm back stop - adjustable 600 mm control DELEM DM 51 operating pressure max. 300 bar oil volume 150 ltr. Rodpfx Agsxab U Hozjck voltage 400 V engine output 6.0 kW Weight 4300 kg range L-W-H 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition (!!) - in checked condition - machine video - ?v=5L8L2AYv0PU ----- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • With CNC control as standard ----- Equipment: - CNC electro-hydraulic press brake with 1x working cylinder - DELEM CNC control model "DM 51" - CNC controlled axis: Y1 - Y2 - X - CNC electro-motorized back stop * Travel path: X = max. 600 mm * Travel speed X axis .. max. 300 mm/s * Positioning accuracy .. +/- 0.02 mm * with 2x manually adjustable stop fingers (R+Z axis) - WILA standard - manual upper tool clamping - WILA standard - manual lower tool clamping - PLACKE safety device at the front: light barrier - side protective device (swivel doors) - rear protective device (swivel + lockable door) - front storage area - side sorting system for bending tools - 1x freely movable foot control - original operating instructions including circuit and hydraulic diagram

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec Rcjdjxabutopfx Agzsk return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen Rcodoxabt Aspfx Agzjk * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, pressure 60.0 t chamfer lenght 2100 mm Rcsdpfjxabckex Agzjk distance between columns 1700 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 5640 kg range L-W-H 3250 x 1960 x 2750 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes