Used Bevel gear grinding machines for sale (20)

Condition: excellent (used), Year of construction: 2019, Machine/vehicle number: 32006, Input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: S23I7Dru -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: excellent (used), Year of construction: 2005, Gebr. gear grinding machine - spiral bevel grinder Make: Gleason Type: 275 G Year of construction: 2006 Zobvhxr

Condition: used, Year of construction: 2007, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm Bnxv0Zb7E diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control 160 i - MB FANUC total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB robot cell (KUKA Robot) no coolant filter system available

Condition: used, Year of construction: 1998, Machine/vehicle number: 291.127, max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Dpo7Ah weight:13000 kg Face Milling-Single Part Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts.

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW Btr2Mnu3Dg weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Gear Grinding Machine STANKO 5A851 Module 2-10 Dpoxcr Gear diameter 35- 320 mm Number of teeth 10- 120 Gear width 220 mm Maximum angle of the ground teeth 45 degrees Spindle speed 2650 rpm Distance between centers 300-360 mm Dimensions 3170x1820x1820x202020mm Machine weight aprox 7 to

Condition: good (used), BEVEL GEAR GRINDING MACHINE KLINGELNBERG WNC-30 Cujdfm7Q93

Condition: used, Gleason package of machines for sale: Fj3Na2Kq 1) Straight bevel gear machine Gleason no. 724 – 2pcs machines 2) Straight bevel revacycle machine Gleason No. 726 3) Revacycle cutter checking machine Gleason no.19 4) Hypoid cutter sharpener Gleason no. 13A +lots of accessories very good condition. For more details please contact us.

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm diameter of tools min 69,85 mm tooth width max. 58 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI Dpta9V with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

Condition: used, Year of construction: 2002, Machine/vehicle number: 28 716, max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation Ccbt3Cg

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg Dpfkth No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Year of construction: 2005, Condition: good (used), Functionality: fully functional, Machine/vehicle number: 29319, TECHNICAL DETAILS Control: Siemens Sinumerik 840D bevel gear diameter: max. 275 mm module: max. 8 mm gear width: max. 58 mm transmission ratio: max. 1:10 grinding wheel diameter: 230 mm WAGURI eccentric grinding spindle: yes MACHINE DETAILS operating voltage: 400 V / 50 Hz Power consumption: approx. 83 kVA Weight: approx. 10.000 kg Cbeo0Mrqfy

Year of construction: 2006, Condition: excellent (used), max wheel Diameter: 275 mm gear width: 58 mm max mod.: 8 min mod.: 0.5 machine weight: 10t Cgbqwpg0Rs max nr. of teeth: 200 min nr. of teeth: 5

Condition: good (used), Model No. WNC 80 KLINGELNBERG “CNC” spiral bevel gear grinding machine suitable for the hard finishing of spiral bevel and hypoid bevel gears and pinions which are pre-machined with cutter heads in either face-milling or face-hobbing processes up to 31.49” (800mm) pitch diameter, DP 25 TO 1.4 (module 1 to 18) and 5.12” (130mm) maximum face-width, utilizing non-dressable plated CBN wheels, or dressable wheels such as conventional aluminum oxide, SG, and/or vitrified type, employing the on-board dressing device with diamond dressing roll The machine corresponds to the attached copy of factory literature, featuring the following: FEATURES / EQUIPMENT: • Machine with double-spindle wheelhead design allowing the convex and concave tooth flank to be ground and finished in one single operation • Double-spindle wheelhead also provides possibility of rough and finish grinding separartely, with two grinding spindles equipped with one roughing and one finishing wheel. • Stationary dressing unit at the back of the machine base, with dressing spindle which can be swiveled via hydraulic cylinder into the work range of the machine for dressing of the grinding wheels • Swivellable stock dividing device for centering dressed grinding wheels • Full machine enclosure, with sliding door and safety-glass window, and integrated electrostatic oil-mist suction device • IBH “CNC” control with color CRT and spiral bevel gear grinding software with user-friendly conversational dialogue programming, with data interface directly from a central computer. o DNC- Software as basic program for the different Software options o Grinding of spiral bevel gears according the Wiener " 2 Spur process ". o Grinding of the concave and convex flank with two different wheels and with different machine set-up parameters. o Generating & plunge grinding cycles (Formate gears, face couplings). o Software for grinding Gleason gears and pinions. o Servomotors and drives from Bosch/Rexrroth   • Machine and IBH controller in “optional” 6-Axis execution with the following motorized movements CNC-controlled: Jes7U9Pqrv A-Axis (Machine distance adjustment axis) X-Axis (Tooth depth adjustment and plunge advance axis) Y-Axis (Rotation axis) Z-Axis (Workpiece rotation axis) V-Axis (Mounting distance adjustment axis) W-Axis (Axial offset adjustment axis) • Central lubrication system and hydraulic aggregate incorporated within machine’s full enclosure with easy-access panels for maintenance • Full complement of electrics (motors/controls), air-conditioned electric switch-gear cabinet, buss-ducting, conduit, arranged for 480 Volt, 60 Cycle operation • Complete coolant plant (HOFFMANN ERK-75V) with cooler-chiller, and paper-band filtration unit with delivery capacity of 120 l/min. at a pressure of 10 bar • Two (2) grinding wheel flanges • One (1) diamond dressing wheel • Full machine documentation (operator’s manual for the machine and controller, electrical and hydraulic diagrams, parts list, etc.)

Condition: used, Year of construction: 1996, Machine/vehicle number: 914904, max. wheel diameter:215 mm gear width:40.65 mm Largest Speed Ratio:1:10 x-axis:(horizontal) -152 to 102 mm y-axis:(vertical) -102 to 178 mm z-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mm b-axis:3 - 90 ° max. distance machine center to spindle slide:115 mm max. nos. of teeth:5 - 200 ( inclusive ) St. workpiece external diameter max.:215 mm tooth profile - width x height:16 x 40,65 mm grinding wheel diameter:51 -190 mm grinding wheel turining speeds:1000 - 6000 1/min workpiece turning speeds:0 - 30 1/min workpiece spindle bore:konisch 3-29/32 " speed of axis:125 mm/sec. total power requirement:20 kW - 380 V - 50Hz kw weight of the machine ca.:10000 kos. dimensions of the machine ca.:4750 x 3400 x 2540 mm Model 200HG GLEASON Phoenix CNC Hypoid Spiral Bevel Gear Grinding Machine, Serial No. 914904, New 1996. Suitable for the hard finishing of spiral bevel, zerol bevel,and hypoid gears and pinions up to 8" (215.90mm) pitch diameter at 5:1 ratio, 1.6" (40.65mm) maximum face-width, utilizing non-dressable plated CBN wheels, or dressable wheels such as conventional aluminum oxide, SG, and/or vitrified CBN type . - Mhine furnished with free standing, air conditioned electrical enclosure, w/operator's controls located at machine front, adjacent to access door - GE-FANUC Series 150 Momputer Control , 10.4" LCD flat color display, storage capacity for 100 summaries, cycle fault monitoring, and automatic setup and control of 7 axes: Do3Dkf (A ) Work Spindle, (B) Swinging Base, (C) Wheel Spindle, (D) Dresser, (X) Horizontal, (Y) Vertical, (Z) Sliding Base - Machine arrangement as 200HG Grinder - Manual stock dividing system - Wheel dressing unit (dressing cycle via cnc) - Totally enclosed work-area guarding w/powered access door - Work chamber lighting - Hydraulic work piece chucking with draw-rod - Flooded suction-type hydraulic unit Axes Speeds X-Horizontal 4.92"/Sec. (125mm/Sec.) Y-Vertical 4.92"/Sec. (125mm/Sec.) Z-Sliding Base 4.92"/Sec. (125mm/Sec.) A-Workspindle RPM..... 0 to 30 B-Sliding Base..... 0 to 30 deg./sec. C-Wheel Spindle..... 1000 to 6000 RPM D-Dresser Spindle..... 1500 to 8000 RPM Root Angle Range (B-Axis)..... -5 deg. To 90 deg. Equivalent Root Angle Range..... -8 deg. To 90 deg. (Equivalent refers to cradle type machine) Full Depth (Maximum)..... .0.615" (16.00mm) Face Width (Maximum)..... .1.600" (40.65mm) Range of Tooth Numbers..... 5 to 200 inclusive Maximum Gear Pitch Diameter of Typical 35° Spiral Angle Gear Using Maximum Wheel Diameter..... 7.5" Diameter Wheel At the Following Ratios: 1:1..... 6.75" (171.45mm) 2:1..... 8.50" (215.90mm) 5:1..... 8.50" (215.90mm)

Year of construction: 2006, Condition: used, Functionality: fully functional, Machine/vehicle number: 984101, TECHNICAL DETAILS Control: Siemens Sinumerik 840D bevel gear diameter: max. 275 mm T2Fmpnv module: max. 8 mm gear width: max. 58 mm transmission ratio: max. 1:10 grinding wheel diameter: 230 mm WAGURI eccentric grinding spindle: yes MACHINE DETAILS operating voltage: 400 V / 50 Hz Power consumption: approx. 83 kVA Weight: approx. 10.000 kg

Condition: refurbished (used), Project: SALE OF ONE (1) RETROFITTED & MODERNIZED KLINGELNBERG SPIRAL BEVEL GEAR GRINDING MACHINE MODEL G50 1. DESCRIPTION The Klingelnberg spiral bevel gear grinding machine model G50 is a full CNC controlled high performance & high precision machine for grinding circular arc type bevel gears. Depending of the selected and ordered Software options, bevel gear sets with constant tooth height (system Klingelnberg), conical tooth height (system Gleason) as well as sets according to GOST (Russian standard) can be ground with high efficiency and accuracy. Further on and depending of the installed Software options, it is possible to grind workpieces according to „completing“, „semi-completing“ & „single side“ method. 2. FEATURES Krfd9Sz • Single grinding wheel head with automatic working grinding wheel gap recognizing device for the exact stock dividing on both flanks • Workpiece spindle with 8 inch GLEASON taper • CNC path controlled dressing spindle including diamond dressing wheel (Ø75 ; R=X.XX to be selected) • High performance wet grinding device including automatic working tracking system of the oil nozzles • Complete enclosure with integrated mechanical oil dust exhaust device • Automatic working central circulation lubrication system • Outboard standing hydraulic and pneumatic units • Hydraulic workiece clamping device • Foot pedal for workpiece clamping • Automatic working air-conditioning for the electric cabinet • Network capable CNC SIEMENS 840D sl for all working & setup axes with integrated PLC 3. TECHNICAL DATA Workpiece data Maximum workpiece diameter at ratio u = 1 : 1 450 mm u = 1 : 2 480 mm u = 1 : 5 520 mm Maximum Module Mnm 12 mm Minimum Module Mnm 1 mm Maximum pitch cone angle 90 ° Minumum pitch cone angle - 5 ° Maximum spirale angle 60 ° Minimum spirale angle 0 ° Maximum number of teeth 360 Minimum number of teeth (2) 5 Maximum ratio (1 : 50) 1 : 10 Maximum hypoid offset ± 50 mm

Condition: used, Year of construction: 2002, Machine/vehicle number: 29 015, max. wheel diameter:130 mm gear width:170 mm max. module:3 min. module:0,5 total power requirement:48 kVA Do2Lod weight of the machine ca.:9 t dimensions of the machine ca.:7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed

Condition: used, Year of construction: 2000, Machine/vehicle number: 190201, max. wheel diameter:130 mm max. module:3 total power requirement:15 kW weight of the machine ca.:6 t dimensions of the machine ca.:2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Dnx0Jb Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor

Condition: used, Year of construction: 2005, Machine/vehicle number: M750.42930, weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Fq88Q0Z Pick-up machine