Used gear hobbing machines for sale (20)

Condition: good (used), functionality: fully functional, Year of construction: 2002, operating hours: 14,449 h, machine/vehicle number: 0290, Used CNC gear hobbing machine Manufacturer: Liebherr Model: LC150 Year of manufacture: 2002 Serial No.: 0290 Hodpfoyiyhxjx Ab Tofd With loading portal

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min Hfodpfx Abeymf Daj Tsd weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Hfodpfjx Ezyvox Ab Tsd Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: excellent (used), Year of construction: 1999, operating hours: 67,760 h, functionality: fully functional, General Machine Information Manufacturer: Hurth / Modul Hfsdex Ez Eropfx Ab Tjd Machine Type: CNC Gear Hobbing Machine (High-Precision) Control Unit (CNC): Siemens SINUMERIK 840C Year of Manufacture: 1999 Machine Weight (Approximate): 11 000 kg (11 tonnes) Total Connected Load (Approximate): 30 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 315 mm Maximum Module (Nominal for Steel): 6 mm Maximum Hobbing Length (Axial Travel, Z-Axis): 400 mm Maximum Workpiece Weight (Table Load): 500 kg Workpiece Table Diameter: 320 mm Table Speed (Max.): Up to 250 rpm Hobbing Tool Spindle Hob Spindle Taper: SK 40 or similar high-precision taper Maximum Hob Diameter: 130 mm Maximum Hob Length: 280 mm Maximum Hob Spindle Speed: 1500 rpm Hob Spindle Drive Power (S6): Up to 25 kW Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Radial Travel (X-Axis / Cutter Infeed): 350 mm Axial Travel (Z-Axis / Hob Slide): 400 mm Maximum Shift Travel (V-Axis / Tangential): 240 mm Maximum Rapid Traverse Rate (X/Z): 15 000 mm/min Feed Rate (Axial/Radial): 0.1 to 10 000 mm/min

Year of construction: 2005, condition: used, SAMPUTENSILI - S200 - 2005 - used condition as shown on photos - under power, can be tested - more photos available Hfedpjyl Srzjfx Ab Tjd

Year of construction: 1995, condition: used, HURTH MODUL - WF 300 - 1995 - Ref 1 - with hydraulic part changing and feeding Hjdpfx Abeyl Skqs Tefd - used condition as shown on photos - under power, can be tested - more photos available Also available HURTH MODUL WF 200.

Year of construction: 2016, condition: used, MODUL - H80 - 2016 - used condition as shown on photos Hfedpfx Ajyl Siteb Tsd - under power, can be tested - more photos available

Condition: excellent (used), Year of construction: 1984, operating hours: 3,665 h, functionality: limited functionality, Equipment: rotational speed infinitely variable, For sale is high precision micro gear hobbing machine Mikron 102.05, made in Switzerland, year of manufacture around 1984, slightly used, run 3665 moto hours on counter. Have many accessories. Price is 12500 Euro EXW. Hjdpfx Aoymfnlob Tjfd

Year of construction: 2011, condition: excellent (used), Gear hobbing machine type Wahli 91 SPS with automatic loader W38 Hfodpfeyh Rkfsx Ab Tjd

Condition: used, STRAUSAK HS 30 is a Hobbing machine engineered for precision work, offering high accuracy and reliability. Workpiece Ø 0.2–35 mm; max module 1.00; max cutting length 22 mm; teeth 2–390; cutter Ø 6–24 mm. Cutter speeds stepless 400–13,000 t/min. Voltage 50 Hz, 3x380 V; weight ≈600 kg; dimensions L800×W800×H1450 mm. Fitted with PLC control, loading attachment, parts catcher, lamp and coolant system. Delivers tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Hedexyxxispfx Ab Tofd

Condition: used, WAHLI W 92 is a Hobbing machine offering precision, high accuracy and reliable operation. Work capacity: max diameter 10 mm, max module 0.5, workpiece length max 35 mm, max gear width 15 mm, number of teeth 6-180; distance between workpiece and tool 0-28 mm; gear hob max Ø 24 mm; milling cutter speeds 6 steps from 850 to 4500 t/min. Main specs: 50 Hz 3x 380 V supply, power 0.32 CV; machine weight approx. 350 kg; dimensions L630×W530×H1350 mm. Equipment: PLC control, Loader Wahli W20, parts catcher, deburring device, coolant system, central lubrication. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Hfjdpfxjxx U Ahs Ab Tjd

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Hfsdpfx Abst Hwyle Ted Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Year of construction: 1991, condition: used, max. wheel diameter 0 mm max. number of teeth 0 max. module Hfodpfxjt Hwv Ho Ab Tod min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC controlled milling machine for synchronous rings

Year of construction: 1975, condition: used, max. wheel diameter 280 mm max. number of teeth 100 max. module 6 Hodpfx Ajt Hw Dkob Tofd min. module 1 total power requirement 6 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 1966, operating hours: 10,000 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, wheel width: 400 mm, feed length X-axis: 483 mm, feed length Y-axis: 381 mm, feed length Z-axis: 521 mm, rotary table diameter: 740 mm, table diameter: 740 mm, total length: 4,500 mm, wheel diameter: 1,000 mm, gear diameter: 1,000 mm, total height: 2,450 mm, total width: 2,450 mm, input frequency: 50 Hz, workpiece diameter (max.): 1,000 mm, type of input current: three-phase, spindle speed (max.): 200 rpm, table bore: 89 mm, spindle speed (min.): 50 rpm, grinding spindle motor power: 7,500 W, overall weight: 8,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 50 rpm, table load: 3,000 kg, helix angle: 45 °, Equipment: documentation/manual, rotational speed infinitely variable, Machine Description — Churchill U 3615 Gear Hobbing Machine The Churchill U 3615 is a heavy-duty gear hobbing machine designed for accurate and reliable cutting of spur and helical gears in industrial production environments. Built with a rigid cast-iron structure, the machine ensures excellent stability, low vibration, and consistent machining quality during continuous operation. The machine is capable of cutting gears with a maximum diameter of 1,000 mm without tailstock and 863.6 mm with tailstock, and supports workpieces weighing up to 3,000 kg. A maximum gear face width of 400 mm and a maximum module of 10 allow machining of medium to large-sized gears. The rotary table has a diameter of 740 mm, is equipped with six T-slots, and features a table bore of 89 mm, providing secure and precise workpiece clamping. The machine supports helical gear cutting up to ±45°, expanding its application range. The hobbing spindle accepts tools up to 180 mm in diameter and 240 mm in length. Spindle speed is infinitely variable from 50 to 200 rpm, allowing optimal cutting conditions for different materials and gear geometries. Feed movements are controlled via P.I.V. variable drives, offering smooth and precise adjustment of vertical, horizontal, and tangential feeds, as well as intermittent and continuous hob shifting. Hfedox Itfiepfx Ab Tod The machine is powered by a 7.5 kW main motor and operates on three-phase power at 50 Hz. With overall dimensions of approximately 4,500 × 2,450 × 2,450 mm (L × W × H) and a total weight of around 8,000 kg, the Churchill U 3615 is a solid and dependable solution for heavy-duty gear manufacturing. Manufactured in 1966, this machine is fully functional, ready for operation, and supplied with a full set of change gears, technical passport, and operator’s manual, making it well suited for workshops seeking a proven and durable gear hobbing solution. Overall, the Churchill U/PH 3615 offers: -Heavy-duty, industrial-grade build quality -Large part capacity and flexible travel ranges -Adjustable spindle speeds and feed rates -Reliable operation for continuous gear production

Condition: used, TECHNICAL DETAILS - part holder spindle speed : 1500 [Rpm] - tool holder spindle speed : 3000 [Rpm] Hfjdpouhbp Eofx Ab Ted - max part Ø : 50 [mm] - dimensions : 2820 x 2400 x 2500 [mm] - weight : 4200 [kg] EQUIPMENT - CN SIEMENS 840D - STAUBLI robot 6 axes TX60 with CS8C control - deburring device

Condition: used, TECHNICAL DETAILS - Distance between centers : 35 [mm] - Max. stroke of the tail stock spindle : 10 [mm] Hfodpjuhbqiofx Ab Ted - Max. tail stock movement : 10 [mm] - Max. stroke of the plunge Y axis : 5 [mm]

Condition: used, TECHNICAL DETAILS Hfsdpjuhbp Sjfx Ab Tsd - Distance between centers : 35 [mm] - Max. stroke of the tail stock spindle : 10 [mm] - Max. tail stock movement : 10 [mm] - Max. stroke of the plunge Y axis : 5 [mm]

Condition: used, EQUIPMENT - With automaton Zellio SR3 type - Tilting loader no. 11 and vibratory bowl - part diameter 2.50 to 12.5 [mm] Hfjdpfxouhbqps Ab Tsd - part length 0.30 to 30 [mm]

Condition: used, TECHNICAL DETAILS Hjdpfxsuhbqcs Ab Tjfd - Distance between centers : 35 [mm] - Max. stroke of the tail stock spindle : 10 [mm] - Max. tail stock movement : 10 [mm] - Max. stroke of the plunge Y axis : 5 [mm]