Diba Machinehandel B.V.

Condition: excellent (used), Hydro planing head, Leitz Cutting edges: Z 6 Circle diameter: 145 mm Bore: 50 mm Length: 60 mm Nsdpfxjzwwmte Aiuswk Clamping: Hydro Price per piece.

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW 3) Left vertical spindle: 130 mm, 5.5 kW 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Nwodpfxszwwmao Aiujk Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6950 TECHNICAL DATA - max. width of the workpiece: 220mm - max. height of the workpiece: 130mm - 4 spindles: 1) horizontal lower: 220mm, 5.5kW 2) vertical right: 130mm 3) vertical left: 130mm; (2 and 3 spindles) 5.5kW 4) horizontal upper: 220mm, 5.5kW - 4 spindles, electrically adjustable up/down - all spindles adjustable up/down, left/right - spindle diameter: 40mm - from above: 4 infeed rollers, toothed, including 1 double roller - from above: 1 double outfeed roller, rubber - from below: 1 outfeed roller, rubber - feed on Cardan shafts - stepless feed speed adjustment: 6-22m/min - feed motor: 2.2kW - lifting motor: 0.55kW - electric adjustment of planing thickness - length of the infeed table: 1970mm Nwsdpfx Aiozwwlijuek - central lubrication - diameter of the dust extraction outlet: 3x120mm, 140mm - enclosed in a cabinet - dimensions (L/W/H): 3350x1400x1400mm, weight: 1700kg - German production - unpainted - used planer, very good condition Net price: 29900 PLN Net price: 7119 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Precision setting gauge for Weinig Hydromat Mandrel – 50 mm Nwjdozwwk Sspfx Aiusk

Condition: good (used), Weinig Hydromat H 23 Profiling Jointer Njdpfx Aozwwi Usiujwk

Condition: good (used), Weinig Hydromat 23 Nwodpfxjzwwhkj Aiujk

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 170mm 6 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 170mm 3) vertical left 170mm (spindles 2 and 3) 11kW 4) horizontal upper 230mm 11kW 5) horizontal upper 230mm 7.5kW Njdpfezwwc Ijx Aiuowk 6) horizontal lower 230mm 11kW - all spindles adjustable up/down, right/left - spindles 4 and 5 with electric up/down adjustment - spindle speed 8000 rpm - spindle diameter 40mm - all spindles equipped with an electric brake - 6 top feed rollers, pulling, toothed, including 1 double roller - top discharge roller, pulling, rubber, double - bottom discharge roller, pulling, rubber, double - side pressure - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment 6-24m/min - feed motor 4kW - electric adjustment of planing thickness - body lifting motor 0.55kW - central lubrication of the table - diameter of extraction nozzles 6x140mm - dimensions (L/W/H) 4900x2400x2000mm - weight approximately 4000kg ADVANTAGES – German production, WEINIG brand – with 6 heads – unpainted – used planer, very good condition Original photos Net price: 122900 PLN Net price: 2926 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: new, Year of construction: 2025, Working width: 25 - 230 mm Working height: 10 - 120 mm Minimum workpiece length: 450 mm Feed rate: 5 - 25 m/min Njdpfjzwvpaox Aiuewk Spindles: bottom, right, left, top, universal Surfacing spindle: 4 kW Both vertical spindles: 5.5 kW Spindle (top): 4 kW Universal spindle: 4 kW Spindle diameter: 40 mm Spindle speed: 6000 rpm Machine available ex works, without tools.

Condition: excellent (used), Year of construction: 2001, Weinig A1 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Nodpfxjzwmk Uj Aiuewk Machine nr 92781 Suitable for boards from 1.8m to 6.1m long. Video is only for explanation purposes

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Nwodpfxezwfxko Aiujk Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat (Hydromat) 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Nwsdpszwfwtefx Aiuek Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Nwsdpfx Aozv S Hxjiusk POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer Nwodpfxozv S Hlo Aiuok 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker Njdszv S D Rjpfx Aiuswk 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. Nsdpfx Ajzv S Dqsiujwk -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: excellent (used), Year of construction: 2009, LEADERMAC SPEEDMAC 923SP SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (11 KW) - OUTBOARD BEARING RIGHT (11 KW) - Nwsdpezv S Ddjfx Aiuek LEFT (11 KW) - RIGHT (11 KW) - PROFILE JOINTER LEFT (11 KW) - PROFILE JOINTER TOP (15 KW) - OUTBOARD BEARING BOTTOM (22 KW), TOP (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER BOTTOM (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER WORKING WIDTH: 230 MM, HEIGHT: 160 MM. MAX FEED SPEED 60M/MIN (POSSIBLE TO INCREASE IF NEEDED) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: reconditioned (used), LEADERMAC THUNDERMAC 923T SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (22 KW) - RIGHT (15 KW) - LEFT (15 KW) - RIGHT (15 KW) - LEFT (15 KW) - TOP (22 KW) - BOTTOM (22 KW), TOP (22 KW) - BOTTOM (22 KW). WORKING WIDTH: 230 (245) MM, HEIGHT: 160 MM. MAX FEED SPEED 80M/MIN (POSSIBLE TO INCREASE TO 150M/MIN) Nsdpfx Ajzv S A Hjiuewk STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Nwodpfxozv S Ayj Aiujk Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (6000 rpm) straight jointer Left (15 kW) - (6000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (6000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (6000 rpm), outboard bearing, straight jointer Electronic spindle position adjustment as follows 1. 3rd spindle width adjustment. 2. 4th spindle thickness adjustment. 3. 5th spindle thickness adjustment. Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. Nedozv S Atjpfx Aiuowk CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED Nwjdpfszv S Aajx Aiujk FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS Nwjdpfx Aiszv Sz Nsusk BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: good (used), SCM P64 Four-Sided Planer - Planing width 18 cm - Planing height 12 cm - Cutterhead set, standard cutters - 2 feed speeds - Electric height adjustment for the upper planing head and feed rollers - All spindles are adjustable vertically and horizontally Nsdszv Scaopfx Aiuowk Machine in very good condition.

Condition: like new (used), Year of construction: 2022, operating hours: 496 h, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 240 mm, working height: 130 mm, total width: 1,745 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, workpiece height (max.): 120 mm, type of input current: three-phase, workpiece width (max.): 240 mm, input voltage: 400 V, table length: 2,500 mm, number of spindles: 7, input frequency: 50 Hz, table width: 230 mm, Equipment: motor brake, SCM Superset NT – four-sided planer, 2023, 496 operating hours Automatic in-line planer for four-sided planing and profiling. Manufactured in 2023, with only 496 hours of operation – practically a new machine. EQUIPMENT - SCM Mobile 10 control system – 10-inch touchscreen - Memory: 999 programs, 300 tools - HSK quick-change tool holder - Centralized automatic lubrication system - Motorized feed rollers TECHNICAL DATA - Spindle diameter: 40 mm - Min. workpiece cross-section: 25 × 6 mm - Profiling tool diameter: 100–200 mm - Vertical spindle axial adjustment: 80 mm - Horizontal spindle axial adjustment: 45 mm - Noise level: 76.5 dB(A) on the feed side / 73.0 dB(A) on the outfeed side Nsdpozvy Htofx Aiuswk Detailed technical specifications – number and arrangement of spindles, working width and height, feed speed, motor power – available upon request. Inspection and demonstration under power by prior appointment in Kalnciems, Latvia. Price EXW Kalnciems. We can arrange dismantling and loading for export.

Condition: new, Year of construction: 2005, Planing machine with infeed device EM 11 with 5th spindle at the bottom Nodpfjzvvuaex Aiuswk Includes 5 planing heads.

Condition: used, Year of construction: 1999, functionality: fully functional, spindle diameter: 40 mm, total width: 1,800 mm, total height: 1,890 mm, total length: 4,200 mm, overall weight: 3,200 kg, spindle speed (max.): 6,000 rpm, type of input current: three-phase, input voltage: 400 V, number of spindles: 6, Weinig Profimat 23E four-sided planer Working width: 230mm Working height: 120mm Number of spindles: 6 Bottom: 7.5kW Right: 7.5kW Left Top: 7.5kW Bottom: 11kW Universal: 5.5kW Spindle diameter: 40mm Working speed: 24m/min Pneumatic pressure pads for feed rollers Electric adjustment of the pressure bar Nsdpfx Aijzvgbwjuewk Length of the infeed table: 1970mm Table lubrication system Year of manufacture: 1999 Machine dimensions: 420x180x189cmH Machine weight: 3200kg