toolconcept A. Züwerink

Condition: used, Year of construction: 1998, Used deduster Kodpfsxvnnlsx Ab Uedw Year of manufacture NE 250 W, right-side pneumatic filter regeneration Including suction nozzle d = 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on/off switch, potential-free contact for machine monitoring and automatic start/stop function, motor protection switch, airflow monitoring / differential pressure indicator, 3 mobile dust bins with inserted chip bags and clamping brackets, robust filter module made of galvanized sheet steel with automatic extinguishing system. Technical data: Maximum airflow: 5,050 – 5,600 m³/h Nominal airflow: 3,532 m³/h Corresponding negative pressure: 2,500 / 2,960 Pa Suction side connection: d = 250 mm Mode of operation: continuous duty Power supply: three-phase current Power consumption: 5.5 kW / 9.8 A Filter area: 25.2 m² Filter cleaning: automatic, pneumatic Total chip collection volume: 480 liters Chip bags (PE): 600 x 600 x 1,100 mm Weight: approx. 1,100 kg Noise level according to EN 23744: 72 dB(A) L x W x H: 3,350 x 1,020 x 2,290 mm Required connections: Compressed air standard coupling NW 7 approx. 6 bar, serviced and cleaned compressed air Extinguishing water connection 1" at 3 bar 1 x 32 A CEE socket Due to varying extraction volumes and differing chip/dust contents, the uniform filling of the bins cannot be guaranteed in every operating situation with this system. Dedusters of this series are suitable for the extraction of wood dust and similar types of dust, whereby an H3 residual dust content of 0.1 mg/m³ is reliably maintained. Availability: by arrangement Location: Frankfurt

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Kdsdpfxjxup Aus Ab Ujw Compressed air consumption: approx. 360 normal litres per cleaning cycle Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 10866888, type of input current: three-phase, filter area: 1,087 m², volume flow: 37,000 m³/h, intake manifold diameter: 600 mm, nominal flow rate: 37,000 m³/h, overall weight: 5,850 kg, total width: 4,500 mm, total length: 6,500 mm, total height: 5,785 mm, input voltage: 380 V, noise level: 82 dB, compressed air connection: 6 bar, nominal power: 60 kW (81.58 HP), extraction nozzle diameter: 630 mm, suction capacity: 37,000 m³/h, input current: 55 A, input frequency: 50 Hz, space requirement width: 6,000 mm, space requirement length: 12,000 mm, space requirement height: 5,785 mm, sheet thickness aluminum (max.): 2 mm, inlet: 630 mm, control voltage: 380 V, Equipment: CE marking, Dust collector SCHUKO with Goldcone cartridge filter. 2 x 30 kW ventilators Still in use in our workshop in Brussels, BELGIUM, until we move to our new building in September 2026. Only available in September 2026. Kdsdjxuftvjpfx Ab Uew

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology Kodpfxexrdhao Ab Uodw The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: ready for operation (used), functionality: fully functional, Paint mist extraction with supply air system Manufacturer: Späne Kedpfexl Um Tox Ab Uedw Paint mist extraction wall Spänex TAW 220 Air volume 6,000 m³/h, motor power 1.35 kW Exhaust pipe diameter 400 mm Baffle wall area 2000 mm x 1900 mm Extraction wall depth 800 mm Supply air unit with heating coil Spänex WK 61 for paint booth ventilation cassette-type design Air volume 6,000 m³/h, motor power 2.5 kW Heating medium: hot water 90/70°C Thermal output 77 kW Supply air duct components Filter outlet ceiling 1900 mm x 1900 mm x 300 mm Connection bends, duct elbows Control and regulation cabinet For supply air unit and paint mist extraction Already dismantled and ready for loading

Condition: used, Used machine Data to follow Kdjdpsxllw Nofx Ab Uow

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Kjdpfoxh Ammjx Ab Usdw Manufacturer: Piovan Type: — Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Manufacturer: Siemens Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm

Condition: excellent (used), Year of construction: 2018, We offer you: Extraction system Manufacturer: Ringler (Kärcher Group) Model: RE 36/110 D11 IE3 Year of manufacture: December 2018 Technical specifications Voltage: 400 V Power: 11.0 kW Current consumption: 19.54 A Frequency: 50 Hz Speed: 2930 rpm Protection rating: I.C.L. F / BIP 55 (IP55 – dust and jet water protected) Weight: 754 kg Kodpoxguavofx Ab Uedw CE marking Motor efficiency class: IE3 Subject to change or error in technical data and information, as well as prior sale!

Condition: used, Year of construction: 1998, functionality: fully functional, BGU clean air unit type RLG 1000, H2-certified, B1 design, 400 Volt, 1.95 kW, 730 m³/h, weight 150 kg, machine size 1150 x 650 x 1400 mm Kdjdsxf E Hkjpfx Ab Uow

Condition: ready for operation (used), Dust collector, cartridge dust filter, dust filter – used machine Manufacturer: Dongguan Jieba Type: Y3-132S1-2 Overall Dimensions: 1000 × 1030 × 2040 mm Kodpfx Asxfkuysb Uedw Electrical Data: 5.5 kW, 400 V; 11.1 A

Condition: used, Year of construction: 2000, functionality: fully functional, This Dustomat-63 - Suction nozzle Ø: 160 mm - Main motor: 3 kW - Item description: mobile, CE-mark, 3 kW, Ø=160 mm - Filter cleaning Kjdpfexakdkjx Ab Ujdw - Mobile separator container - Rated volumetric flow: 1,850 m³/h

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Kedpfew T U Uzex Ab Uedw Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, Only a few running hours. The table must be connected to a external dust extractor. We ship all over EU. Kdsdpfx Abow T Sico Uew

Condition: excellent (used), Year of construction: 2016, Technical data POWER UNIT 200 P used - Excellent condition - Kedow Tqndjpfx Ab Ujdw • Inlet diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. air flow: 3010 m³/h • Rated air flow: 2262 m³/h • Vacuum: 2174 Pa • Filter surface area: 13.7 m² • Filter cleaning: compressed air cleaning • 2 discharge containers (roll containers): each 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 mm • Weight: 320 kg • Version: left Location: Ex-stock Bitburg - Immediately available -

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 NESTRO® extractor, a new generation, powerful, compact, economical, and with some highlights that will inspire you. Vacuum filter for extraction and filtration of wood dust and wood chips. H3 test according to GS-HO-07 (BGHM), GS scheduled. Fire extinguishing device, fire protection flap / oxygen closure. Vacuum filter with JET compressed air pulse cleaning including suction nozzle, 5 m cable for socket connection (protective measure grounding), suction connection left / fan right Technical data: • Airflow max./nom.: 6,000 / 5,850 m³/h • Vacuum max./nom.: 2,950 / 2,400 Pa • Suction side connection: Ø 300 mm • Mode of operation: continuous operation • Current type: three-phase current • Power consumption: 7.5 kW / 16 A / 50 Hz • Fan/drive: IE3 asynchronous motor • Filter area: 36.2 m² • Filter regeneration: JET / automatic • Compressed air consumption per cycle: 560 Nliters • Chip disposal: chip bin with PE bag • PE bag (consumable): 500020 • Collection volume: 3 x 0.16 m³ • Weight: approx. 1,250 kg • Noise level according to EN 11201: 72-74 dB(A) in accordance with MRI (+/- 4dB) • Length x width x height: 3880 x 1020 x 2250 mm Required connections: • Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free • 1 x 32 A CEE socket / fuse 25 A For systems with chip sack filling, uniform filling cannot be guaranteed due to different extraction volumes and varying chip/dust contents Availability: short-term Storage location: Flörsheim Kdodpew Naazsfx Ab Uow

Condition: new, Year of construction: 2024, New dust extractor Year of manufacture: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Suction nozzle: 160 mm, right Kjdpfx Abow I U Hao Uedw Operating air volume: 2300 m³/h Volumetric flow max/nom.: 1780/1447 Vacuum at nominal air flow: 2450 Pa Vacuum before fan at VNenn: 3160 Pa Maximum sound pressure level: 74 dB(A) Filter regeneration: pneumatic, max. 7.5 bar Operating mode: continuous operation Compressed air connection required Availability: short notice Location: Hochheim

Condition: new, Year of construction: 2024, New dust extractor Year of construction: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter surface area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Inlet connection: 160 mm, right Operating airflow: 2300 m³/h Maximum/nominal airflow: 1780/1447 m³/h Negative pressure at nominal airflow: 2450 Pa Negative pressure before fan at nominal flow: 3160 Pa Maximum sound pressure level: 74 dB(A) Filter cleaning: pneumatic, max. 7.5 bar Operating mode: continuous operation Ksdpfxow I U Rxe Ab Uedw Compressed air connection required Availability: short-term Location: Solingen

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 NESTRO® Deduster – a new generation: powerful, compact, economical, and featuring numerous highlights that are sure to impress. Includes innovative extinguishing system with drop flap and oxygen suppression, 5 m cable and CEE plug with polarity reversal, IE3 fan drive, selector switch H-O-A, and integrated emergency stop function. The NE-J ECO is, of course, H3-certified. The newly designed model fits into any standard sea container. The suction nozzle with injection box and non-return flap is located centrally on the front end of the deduster. The highly efficient JET filter regeneration guarantees long filter service life, low filter resistance, and therefore high extraction performance. The dust bins each feature 4 swivel castors, a viewing window for fill-level monitoring, and each includes a robust chip collection bag. Technical data: • Max./nominal airflow: 8,000 / 6,925 m³/h • Negative pressure max./nominal: 3,400 / 2,750 Pa • Suction side connection: Ø 350 mm • Operating mode: Continuous operation • Current type: Three-phase current • Power input: 11 kW / 21 A / 50 Hz • Filter area: 38 m² • Filter regeneration: JET / automatic • Compressed air consumption per cycle: 560 Nltr. • Chip disposal: Chip bin with PE bag • Weight: approx. 1,250 kg • Noise emission according to EN 11201: 72-74 dB(A) according to MRI (+/- 4dB) • Dimensions (L x W x H): 1,060 x 3,981 x 2,174 mm Required connections: • Compressed air standard coupling NW 7.2; 6 bar, dry and oil-free compressed air Kdedsw I U R Sspfx Ab Uow • 1 x 32 A CEE socket Location: Solingen Availability: short notice

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration model, used only for testing purposes (occupational health and safety authority), dusted and cleaned. Ksdpfow H Rp Aex Ab Ujdw

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Clean air dust extractor for installation in the work area. Ksdpfxsw Hrqns Ab Usdw With subframe for briquetting press, container size 1400 x 1400 mm. Technical data: Inlet port 250 mm Motor data 7.5 kW; 13.7 A; 3 phase; 400 V/50 Hz; IE3 max. air flow rate 4,900 m³/h Filter area 22.4 m² (63 x Ø 95 mm, 1,150 mm length) Filter cleaning by compressed air Filter material cat. M Max. sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201, measured at 1 m distance) Residual dust content H3 /

Condition: good (used), Year of construction: 2007, Used Al-ko clean air dust extractor, Intake nozzle: 160 mm Motor rated power: 2.2 kW / 3-phase Voltage: 400 V / 50 Hz Nominal air volume flow: 1850 m³/h Negative pressure: 2120 Pa Filter area: 9 m² Filter material: Category "C" - BIA certificate - electrically conductive - washable - H3 < 0.1 mg/m³ Filter cleaning: compressed air Max. sound pressure level: 69.4 dB Chip collection volume: 280 litres Dimensions (L/W/H) in mm: 1600 x 830 x 1850 Weight: 288 kg Location: ex stock 54634 Bitburg - immediately available - Ksdpfx Aow Aptlob Uodw

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration model, used exclusively for testing purposes (trade association), intentionally dusted and cleaned. Right-hand version with connection diameter: 300 mm with flange JET cleaning system Kjdpfx Aeww Eryjb Usdw Motor power: 7.5 kW Filter area: 32 m² Nominal air flow: 5,089 m³/h Maximum air flow: 6,000 m³/h Vacuum at 20 m/s at suction port: 2,731 Pascal (in dusted condition) Collection volume: 3x160 liters 5-meter connection cable with 32A CEE plug Dimensions: see photo

Condition: new, Year of construction: 2025, functionality: fully functional, The DC3000 from CORMAK is an advanced sawdust cyclone designed for intensive dust extraction processes in the woodworking, furniture and metalworking industries. Thanks to its state-of-the-art cyclone separator, powerful sawdust fan and double filtration system, the unit ensures effective air cleaning of fine and coarse dust fractions. The sawdust extractor DC3000 is distinguished by its automatic filter shaking and remote control - which significantly increases the comfort and efficiency of daily work. Technical parameters Extraction capacity 2000 - 7000 m³/h Fan rotation speed 2800 rpm Suction nozzle diameter 3 x 100 mm / 1 x 200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions 1300 x 1000 x 2200 mm Kdsdpowwtz Njfx Ab Uew Weight 219 kg Standard equipment Automatic filter shaker Remote control Pressure gauge Double filtration system (main and pre-filter) Metal container under the separator Transport wheels

Condition: new, Year of construction: 2025, functionality: fully functional, Self-cleaning dust filter, more effective than cloth and felt bags. Holds dust up to 2 microns, thus guaranteeing increased cleanliness and safety at the workplace. The filter is equipped with a self-cleaning system. Technical specifications Cylinder diameter: 500 mm Height: 1175 mm Weight: 14 kg Kodpfxswwtnvj Ab Usdw The filter also fits to extraction models: FM300, FM340, FM300S, FM300SA, FM500 Manufacturer: Cormak

Condition: used, Extractor manifold with 6 connections and electric valve. The valve needs repair. main pipe: 280 mm Kodpfx Aewwkg Njb Uedw connection: 3 x 140mm // 2 x 80mm // 1 x 120mm