Infleks SIA

Condition: ready for operation (used), Year of construction: 2009, This STEFANI Solutions 86 edgebander was manufactured in 2009. It features Nordson equipment, a maximum glued edge thickness of 25 mm, and a maximum panel thickness of 60 mm. The machine includes electric height adjustment, upper belt pressure, and a preheating zone. It also boasts interchangeable roller storage with 12 positions and a replaceable glue pot. Consider the opportunity to buy this STEFANI Solutions 86 edgebander. Contact us for more information about this machine. Application Types Edge Banding Lhodpfxsx Nr Ras Agzjr

Condition: ready for operation (used), Year of construction: 2008, General Data Lhedpfxox Nr Hno Agzjr Measurements depth 8260 mm This BRANDT KDF 991 edgebander was manufactured in 2008. It is designed for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 991 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2003, Brandt Edge Banding Machine Type: Profi KDF 670 Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application. Lodpfxex Nrtns Agzohr Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations. Infrared hot-melt glue activation Automatic edge magazine for coil material for thick PVC/ABS Heavy-duty pressure zone Centrally adjustable top pressure Operating panel at machine infeed PC 16 electronic control Technical Data: Edge thickness: 0.4 - 8 mm Roll cut, max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tool set R = 2 mm (exchangeable for R = 3 mm) Quickmelt gluing module Motor-driven height adjustment for top pressure - PC 16 Adjustable infeed fence Program-controlled adjustment for infeed fence Additional unit for laminate overhang Program-controlled pressure zone Release agent application for workpiece Jointing milling unit Jointing cutter set, Dia End trimming unit with chamfer/straight cut 0 - 15 degrees Pneumatic adjustment for end trimming unit, chamfer/straight Flush milling unit Pneumatic adjustment for milling unit Pneumatic two-point adjustment for vertical tracing rollers Jointing unit 0 - 25 degrees, synchronous flush milling Radius cutter set (exchangeable for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment for side tracing rollers Profile milling unit above and below - For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment for scraper Flat scraper glue joint Cleaning agent application for workpiece Buffing unit, 2 motors Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15 Weight: 3000 kg Total connected load: 15 kW Length: 5880 mm Location: ex-site customer - Immediately available - System must be dismantled by the buyer

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2128, feed rate X-axis: 18 m/min, workpiece height (max.): 65 mm, edge thickness (max.): 15 mm, warranty duration: 12 months, HOLZ-HER Edge Banding Machine SPRINT 1329 multi, year of manufacture 2025, ex works delivery - Motorized pressure bridge adjustment - iTronic – automatic pressure and glue quantity control - Motorized adjustment of the infeed fence 1350 mm - Automatic chain lubrication Lsdex Nqn Ropfx Agzjhr - Vertical bottom nesting shoes - Edge-Control PPC 322W control unit with 21.5" color touchscreen - ECO-MODE energy-saving mode - Pre-milling unit FG501 with 2 milling aggregates - Glue application system GlueJet GJ725 for EVA and PUR in cartridge and granule form, swiveling 90 degrees - Storage chute for 1.5 kg EVA granulate - Motorized pressure unit D501 - End trimming unit KA501 - Milling unit FR701 Mot6 multi - Profile milling unit FF701 with 100% repeat accuracy - Scraping unit ZT502 Mot6 multi with motorized 6-axis adjustment - Surface scraper FK701 - Spray unit TR501 for infeed and outfeed - Spray unit GM501 after pressure unit for high-gloss edges - Buffing unit SW501 - Delivery time: immediately available

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Holz-her Lumina 1380 Edgebander with return conveyor Max. edge banding thickness: 8 mm Max. panel thickness: 60 mm Ledpfxsx Nnbbj Agzehr Max. thickness of rolled material: 3 mm Min. workpiece length: 160 mm Min. workpiece width: 60 mm HOLZ-HER GLU JET adhesive system Spraying unit Calibrating units Pre-heating End trimming/cross-cut stations Milling stations for trimming/radius/chamfering Corner rounding units Edge scraper Brush unit Holz-her Edgecontrol control system

Condition: used, Year of construction: 2021, operating hours: 952 h, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, input voltage: 400 V, power: 7.8 kW (10.61 HP), input current: 21 A, input frequency: 50 Hz, We offer this used Hebrock F 5 edge banding machine, year of manufacture 2021. Voltage: 400 V Frequency: 50 Hz Current: 21.7 A Power: 7.8 kW Year of manufacture: 2021 Machine number: F2965 If you have any questions or need further information, please feel free to send us a message or call us. Lhedpfx Aox Nkfvjgzjr

Condition: excellent (used), Year of construction: 2018, Edgebander Lhedpfxox Niuve Agzor Manufacturer: Felder Model: G360 Year of manufacture: 2018 Operating hours: approx. 813 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed speed: 8 m/min Total power: 5.5 kW Overall length: approx. 3,200 mm Pre-milling unit: Yes End trimming unit: Yes Flush trimming unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 80 mm, edge thickness (max.): 15 mm, power of the milling unit: 3,000 W, overall weight: 7,000 kg, compressed air connection: 6 bar, height adjustment type: electric, space requirement length: 10,500 mm, year of last overhaul: 2023, Fully refurbished Topedge Duo-melt, year 2014 2 x 3Kw each Pre-milling motors 80 mm panel thickness 1 x Synchroflex top driven belt system Lsdpex Nbprefx Agzjhr 2 x Glue heads and tanks, Duo Melt system (For instant glue colour changes) 1 x rough trim station 1 x Bevel fine trim (can also be used for fine finishing wood in “flat” setting - adjustable angle 1 x Radius trimming machine 1 x AKF station 1 x 4 position per side AZK4 radius scraper 1 x Flat scraper 1 x Cleaning spray, front, middle and back - LCM 1 x Buffing station 2 x free spaces Infeed fence alignment for narrow panels Nesting package LCM iRelease cleaning system BrushTec ES - not included

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Panel height: 60 mm Edge thickness (roll): 3 mm Edge thickness (strip): 12 mm Panel length: 3200 mm Calibrating unit Lsdpfxjx Nav Rj Agzohr End trimming unit Overlapping trimming unit RS-502 Chamfering unit RF100 Rounding unit with two motors Edge scraper unit Glue scraper unit Brushes unit Blower/Hot air unit SMART TOUCH 23" control

Condition: ready for operation (used), Year of construction: 2007, Infeed grinding spindles Topping group Group activation with 2 motors Rounding group with 2 motors Burr scraper group with electropneumatic adjustment Lhsdpfx Agjx Navwszer Glue scraper group

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. Lhodsx I S R Dspfx Agzjr Application Types Edge Banding

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Workingpiece thickness from to 8-60 mm Total length 3960 mm Lhodpfsx I Sgrjx Agzsr Feed speed 10 m/min. Weight 1055 kg

Condition: excellent (used), Edgebander BRANDT Ambition 1220 Pre-milling units Lodpfx Agox I Nb Hjzshr Glue application by roller Tank features exchange function (machine includes only one tank) Pneumatic pre-cut guillotine Pressure rollers Trim saws for finished cuts Top-bottom milling unit R1-R2 Corner rounding unit Profile scraper Flat scraper Max workpiece height: 60 mm Max edging thickness in roll: 3 mm Max feed speed: 11 m/min Well-maintained machine in very good condition, low operating hours

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, feed rate X-axis: 16 m/min, total length: 3,960 mm, workpiece height (max.): 60 mm, total width: 900 mm, edge thickness (max.): 6 mm, total height: 1,750 mm, overall weight: 1,200 kg, type of input current: three-phase, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 400 V, power: 7.1 kW (9.65 HP), input current: 30 A, input frequency: 50 Hz, pneumatic connection: 6 bar, product height (max.): 1,750 mm, plate length: 1,200 mm, plate height: 60 mm, pressure: 6 bar, operating pressure: 6 bar, Fravol edge banding machine, model F600-23 Plus, from the year 2023. Lhodox I I Raspfx Agzjr - Touch display for setting all necessary parameters - Pre-milling unit - Separation and cleaning agent spraying system - Glue application - Pressure zone - End trimming unit - Top and bottom trimming units - Corner rounding unit - Radius scraper - Flat scraper All units are mechanically / manually adjustable. The machine was only very rarely used for demonstrations and testing purposes at our factory and operates perfectly. The machine is in as-new condition with no known defects or damage. The machine can be inspected and collected at the Rödinghausen facility. On request, we are happy to prepare sample pieces in advance.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Sanding unit (pre-milling) for panels. End trimming unit with two motors. Edge trimmer Edge scraper (radius/flat) Brushes Ledpfx Agsx I Izlozshr Control: Touch screen display

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Pre-milling Gluing unit Ljdpfsx I D Tdjx Agzehr Pressure unit Rounding/Chamfering milling unit Edge scraper

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Lhjdox I A Dujpfx Agzor Glue station for granulate Pneumatic pre-cut guillotine Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Year of manufacture: 2009 Machine length: 3.7 m

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Morbidelli M800 X5 machining center X working field: 6360 Y working field: 1680 Z working field: 350 Lhedpfx Aox I A Aqegzjr 5-axis electrospindle with liquid cooling, 13 kW – HSK 63F Tool magazine disc moving on X-axis, 48 tool positions Processing unit with Vector 360° axis 1 cutting saw blade 1 vertical outlet for milling 3 vertical outlets for drilling 3 vertical outlets for handle holes 2 horizontal outlets for milling 2 horizontal outlets for drilling CE safety system with bumpers CNC PC-Office control with integrated computer 3D programming system WOP XILOG-MAESTRO 250 m³/h vacuum pump Available December 2026.

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips Lhjdex It Hmspfx Agzor with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: new, Year of construction: 2025, operating hours: 380 h, functionality: fully functional, machine/vehicle number: 220.02.004.25, The machine was purchased in January 2025 / delivered in April / used from April to July 2025. For sale due to redundancy following a merger with another joinery. The machine is like new. It features an infeed table with an air cushion, Edgebanding width up to 60 mm and solid edging up to 6 mm thick. Edge thickness milling unit Hot melt granule gluing station Edge trimming unit: ABS 2 mm / solid 6 mm Curve trimming unit for doors Surface scraper unit and edge scraper unit Cleaning unit 3 spray stations: antistatic / anti-scratch for edges / cleaning. Full details of all tools are listed on the attached purchase invoice. Lhedex Itpzepfx Agzer

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Homag Edgeteq S-380 Profiline / PROFI KDF 670 Max edge thickness: 12 mm Max panel thickness: 60 mm Max rolled material thickness: 3 mm Min workpiece width: 70 mm Processing units and groups: End trimming / pre-milling unit Strip edge magazine Cross-cutting saw unit Flush / radius / chamfer trimming stations Corner copying unit Profile scraper blade Flat scraper blade Polishing unit Ljdex Itf Njpfx Agzjhr Edge sanding Edge sanding groups Control system: Homag powerTouch

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Homag EDGETEQ S-380 - Optimat KDF 660 SC Max. edge bonding thickness: 12 mm Max. workpiece thickness: 60 mm Max. thickness of rolled material: 3 mm Min. workpiece width: 70 mm Ljdpjx Itb Rofx Agzjhr Suitable for PUR glue PUR melting unit Strip/edge magazine Joint milling unit NC-controlled pressure zone Cut-off saw unit (cut to length) Trimming/radius/chamfer stations Corner copying unit Profile scraper, flat scraper Polishing unit (brushing)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 4,200 mm, feed length Y-axis: 1,600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Prepared for one main spindle with gluing unit, mounted to the right of the gantry crossbeam. Lsdpfox Irzcjx Agzjhr 5-axis main spindle, 12 kW Drilling head with 31 spindles: 21 vertical and 10 horizontal Grooving saw blade, tiltable 90° Blowing nozzle for 60 mm edge Circular tool magazine for 32 tools, HSKF63 Linear tool magazine with 8 positions Circular magazine with 10 positions Power Edge Pro Duo gluing unit Safety control with bumper Chip conveyor Vacuum pump PowerTouch, WoodWop control software

Condition: used, total length: 1,750 mm, total width: 800 mm, total height: 1,000 mm, overall weight: 60 kg, space requirement height: 1,000 mm, space requirement length: 1,750 mm, space requirement width: 800 mm, No. 3253 Edge banding machine Sudhoff V 30 Used For with hot melt adhesive pre-coated edges made of PVC, ABS, melamine or wood Workpiece thickness 10 - 55 mm Edge thickness 0.4 - 1.0 mm Automatic edge transport Automatic cutting of the rear edges Edge trimming for flush cutting Electromagnetic cutting station for the front edge Hot air blower with 3 kW power Heating infinitely variable Automatic belt feed 7 m/min Transport dimensions approx. 1750 x 800 x 1000 mm LWH Weight approx. 60 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Lodjx Il Ayepfx Agzehr Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Code: 0806 Brand: HIRZT - ITALY Model: B 300 - CE Standard Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard Composition: Motor V. 220 single-phase Pneumatic end cutting unit (shear) front and rear Blower with air filter - Power 440 W Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000 End cutting finishing unit with foot control N° 20 rollers inclined on the plane Feed motor 13 wheels V.200 single-phase - Speed 4,7 mt/min Max edge thickness mm 3 Lsdpfex Ihulex Agzjhr Panel thickness min/max 10/50 mm Min panel dimensions mm 70 x 140 Total absorption Kw 3,8 Digital thermometer 10-350 degrees Extensible front support Overall dimensions mm 1800 x 700 x 1300 h Weight kg 250