Kleefeld AG

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Knsdpfj Aayf Iox Aqpoc Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: ready for operation (used), Year of construction: 2007, Key Technical Specifications Kjdjz Tc E Sspfx Aqpsnc • Type: 3-axis vertical machining center / traveling-column milling machine • Travels (X / Y / Z): 2,200 mm / 560 mm / 720 mm (approx. 220 cm X-axis) • Table Size (L x W): 2,600 x 600 mm • Maximum Table Load: 2,200 kg • Spindle Speed: Up to 18,000 RPM (common configuration for this model variant) • Tool Taper: SK 40 • CNC Control Unit: Heidenhain iTNC 530 • Machine Weight: Approximately 12 tons

Condition: used, Year of construction: 2006, Control MAZATROL 640M x-travel 1.740 mm Knodpoz S N I Dofx Aqpoc y-travel 760 mm z-travel 660 mm table dimensions 2.000 x 760 mm max. table load 1.400 kg spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 30 Pos. weight approx. 11.500 kg Number of working hours ca. 2.770 h Condition: used Technical features & accessories: - 3D probe Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to changes and errors in technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 60, tool weight: 8,000 g, number of axes: 5, This 5-axis DOOSAN VCF850LSR-II was manufactured in 2021. It features an impressive X-axis travel of 3,000 mm, Y-axis travel of 850 mm, and Z-axis travel of 800 mm. The machine includes a robust tool magazine capacity of 60 tools and a maximum load on the fixed table of 3,500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VCF850LSR-II vertical machining centre we have for sale. Contact us for further details. • Operating hours: approx. 2,500 effective hours • Travels: • B-axis: ±110° • C-axis: ±360° • Rapid traverse (X/Y/Z): 40 / 40 / 40 m/min Kodpjz S Hz Uofx Aqpsnc • Max working feed (X/Y/Z): 20,000 mm/min • Spindle: • Power: 24 / 30 kW • Max torque: 121 / 155 Nm • Taper: ISO 40 • Tool magazine: • Capacity: 60 tools • Max tool dia.: 76 mm (130 mm with adjacent positions free) • Max tool length: 300 mm • Tool-to-tool: 5.5 s • Chip-to-chip: 13 s • Workholding/table: • Fixed table: 3,500 × 870 mm, max load 3,500 kg • Rotary table: Ø 800 mm, max load 1,200 kg • Max workpiece Ø: 1,050 mm • Max workpiece height: 680 mm (vertical) / 1,095 mm (horizontal) • Measurement: Absolute linear scales on X/Y/Z • Features: Removable central door; Pendulum machining capability • Utilities: • Electrical: 400 V / 3 phases + ground • Required power: 63 kVA • Compressed air: 6 bar • Coolant tank capacity: 560 l • Condition: Very well maintained • Operational status: In production / under power • Extras: Videos with timestamp available on request • Transport: Reportedly can be transported in one piece Additional equipment • High-pressure through-spindle coolant, 70 bar • Cyclone coolant filtration • Chip conveyor • Renishaw RMP-60 workpiece probe • Renishaw RTS tool setting system • Original kinematic calibration ball • Heidenhain Advanced Function Set 1 • Heidenhain Advanced Function Set 2 • Dynamic Collision Monitoring (DCM) • Lift-Off function • DXF converter • 3D toolpath visualization • 3D machining simulation • CAD Viewer • Automatic lubrication system • Hydraulic unit • LED work area lighting • 3-color alarm lamp • CE documentation • Machine manuals Technical Specification Taper Size ISO 40

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * High metal removal rate machine. * Box guideways on all axes. * Quadruple box guideway system on the Y-axis. * Extremely rigid structure. * Oil-fed guideway lubrication system with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * High-torque 18.5 kW motor. * Cutting torque: 580 Nm. * Chip evacuation capacity: 540 cm³/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool usage monitoring. * Parametric automatic tool anti-collision system. * Communication ports: USB, PCMCIA card, and RS-232. * Tool life management and usage tracking. Kedpfx Aqez Sx Rhepenc * Automatic control of torque and tool stress. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * 36-tool magazine. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system (70 bar pressure). * 30-micron particulate filter system. * LTA mist filtration system. * Rear-mounted hinge-type chip conveyors. * Machine currently in production. * Inspectable by a qualified official Okuma technician. * Condition: Like new. * Extensive BT 50 tooling/holder package. * Includes electrical transformer, documentation, parts list, electrical schematics, and programming/operation manuals. * Machine weight: 20,500 kg. * Immediate delivery available (subject to prior sale).

Condition: excellent (used), Year of construction: 2005, Control system: Siemens Sinumerik 840 D / PCU 50 Travel range X 2300 mm Travel range Y 800 mm Travel range Z 600 mm Working areas in tandem operation 2 × 925 × 800 mm Main spindle 30 – 8000 rpm Spindle power 27.0 kW Spindle torque 244 Nm Machine bed: torsionally rigid, stress-relieved welded construction. Guidance system: roller guides Measuring system: direct path measuring system / glass scales on X, Y, and Z axes Resolution measuring system 3 μm / 1000 mm Feed drives: digital three-phase servo motors Feed rate up to 30 m/min Main spindle: water-cooled CELOX motor spindle Tool holder HSK A63 Spindle power 20.0 kW / 18.3 Nm Spindle speed 12,000 rpm Spindle cooling: cooling unit with closed circuit. Spindle orientation freely programmable Tool magazine: rotary tool magazine Tool positions 56 Tool holder magazine HSK A63 Max. tool length 330 mm Max. tool weight 10 kg Max. tool diameter 80 mm Magnum version C80/2300: 56-position Magnum tool magazine Spindle speed 12,000 rpm / 29.0 kW Operating panel BHG / 840D, external Signal light 1-fold Hollow shank taper HSK A63 / 12,000 rpm Compressed air nozzle on the spindle head, controlled by M-function Full enclosure 80 × 2300 Exhaust filter MultiAir exhaust filter Kedpjz R R Dnofx Aqpjnc Extraction capacity 1200 m³/h Filter stage 1 Metal filter, class G Main filter AeroPlus, class F9 Flushing guns 1 pair, 3 bar / 20 l/min Working area partition C80, manually swiveling in/out Load direction cabinets C80, for tool measurement/inspection Max. tool length load direction cabinet 230 mm Max. NC rotary table RT 500 Max. pickup magazine T3/W2 NC rotary table RT 250 The machine was also supplied with a vertical NC rotary table RT 250, including hydraulic spindle clamping and faceplate. Technical data RT 250: Part accuracy 15″ ± Repeat accuracy 4″ ± Center height 160 mm Runout 0.015 mm Flatness 0.015 mm Bore in rotary table 60 mm Speed max. 22 rpm Faceplate Ø 250 mm Bore in faceplate 35 H7 T-slots DIN 605 12 mm Number of T-slots 4 pcs Drive torque 300 Nm Holding torque 1000 Nm Tilting moment 1200 Nm Transport load 120 kg with tailstock 250 kg Weight approx. 60 kg 2-point transformation optional Further components: - 2 x compressed air guns with quick coupling, spiral connection hose, and holder. - 1 x flushing gun, flushing pressure: 3 bar / 20l/min. - 1 x anchor screws x 2300 - 1 x laser light barrier - 1 x working area partition - 1 x 3D wireless probe system Renishaw RMP 60: System 3D wireless probe system Switching 3D probe stylus yes Transmitter/receiver unit yes Battery 9 V Probing accuracy ± 2 μm Probing speed 3 m/min Probe stylus length 50 mm Ball diameter 6 mm (ruby) Repeat accuracy < ± 2 μm

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Heidenhain, workpiece length (max.): 3,260 mm, workpiece width (max.): 1,700 mm, table load: 10,000 kg, overall weight: 23,000 kg, spindle speed (max.): 10,000 rpm, spindle nose: BT50, AWEA DOUBLE-COLUMN MACHINING CENTER TECHNICAL SPECIFICATIONS Brand: Awea Model: SP-3016 CNC: Heidenhain Kodez R Ducspfx Aqpenc Spindle: BT50 (10,000 Rpm) X: 3060 mm Y: 1600 mm Z: 760 mm Distance between spindle and table: 200 - 960 mm Distance between columns: 1700 mm Table: 3260 mm x 1500 mm Maximum load capacity on table: 10 tons Internal coolant system Chip extractor PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control Knodez Riy Rjpfx Aqpsc 120-position tool changer HSK 63 tool interface Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Work area enclosure 3D probe, Heidenhain Blum laser Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Robot interface Oil and emulsion mist separator

Condition: good (used), Year of construction: 2018, operating hours: 3,575 h, machine/vehicle number: 108.008.00.0055, total height: 3,417 mm, total length: 4,680 mm, total width: 4,471 mm, table width: 850 mm, table length: 2,100 mm, overall weight: 19,500 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 1,010 h, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron VCE 2000 Pro * 3-axis machining center * X-axis travel: 2000 mm * Y-axis travel: 900 mm * Z-axis travel: 800 mm * Table size: 2100 × 850 mm * Maximum table load: up to 3000 kg The machine features the following technical equipment: Control system: Heidenhain TNC 620 Spindle speed: 10,000 rpm Tool holder: SK 40 Kodpfx Aoz Nh R Esqponc High-pressure pump: 20 bar Tool magazine: 30 positions Preparation for a 4th axis The machine is located in Eschweiler.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: SIEMENS, controller model: 840, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 20, number of axes: 4, This 4-axis TECHMILL LABOR SHAPE 3220 was manufactured in 2013. It features a spacious table size of 3000 x 2000 mm and impressive travels of 3000 mm in the X-axis, 2000 mm in the Y-axis, and 1500 mm in the Z-axis. The machine is equipped with a Siemens 840 CNC control and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the TECHMILL LABOR SHAPE 3220 machine we have for sale. Contact us for further details. Knsdpfez Ng Hrex Aqpjc • Table size: 3000 x 2000 mm • Tool holder: HSK 63 A

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 6700 XL was manufactured in 2021. It features an impressive X-axis travel of 2,100 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a FANUC i-Series CNC control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700 XL vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent, used • Functionality: Fully functional Kjdpfxoz Ngy Ej Aqpjnc • Display: 15" • Program storage: 2 MB / 1,000 programs • Rapid traverse X/Y/Z: 30 / 30 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Ball screw nut cooling • Tool breakage detection • Automatic doors • Robot interface • 4th-axis preparation • Ethernet connection • Coolant gun • Coolant level sensor Additional equipment • HIWIN RCV 320 rotary table (4th axis) • HIWIN RTS 320 support (tailstock) • Hydraulic aggregate: 200 bar, 3 A+B • Hydraulic 4th-axis fixture support: 4x oil / 4x air; seat air check • LNS MH500 chip conveyor • Oil mist extraction system • Oil skimmer Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,800 mm, total width: 3,500 mm, table load: 6,500 kg, overall weight: 16,400 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 24,000 W, product length (max.): 5,200 mm, number of axes: 4, This 4-axis ANAYAK CORREA XPERTA 25 was manufactured in 2015. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a robust table size of 2,800 × 1,000 mm and a maximum table load of 6,500 kg. If you are looking to get high-quality machining capabilities, consider the ANAYAK CORREA XPERTA 25 vertical machining centre we have for sale. Contact us for further details. • Table size: 2,800 × 1,000 mm • Spindle torque: 286 / 382 / 840 Nm • Rapid traverse X/Y/Z: 25 m/min • Universal indexed head: 2.5° • Through-spindle coolant (CTS): 30 bar • Machine dimensions / footprint: 5,200 × 3,500 × 2,800 mm Kodpfoz I Rimsx Aqpsnc Additional equipment • Chip conveyor Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 36, number of axes: 3, This 3-axis AXA VHC-3-3000-M/E was manufactured in 2002. It features an impressive X-axis travel of 2940 mm, Y-axis travel of 900 mm, and Z-axis travel of 950 mm. The machine includes a robust table size of 4350 x 900 mm and a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the AXA VHC-3-3000-M/E vertical machining centre we have for sale. Contact us for further details. Table Clamping Surface: 4350 x 900 mm (with 7 T-slots 18H7 RTA integrated)Swivel Head: Stepless positioning swivel headNC Rotary Table: Type RTA 4 L - 800Spindle Speed Range: 40 - 12,000 rpmSpindle Taper / Tool Holder: SK 40 DIN 69871-A (Hohlwellenmotor, water-cooled)Spindle Note: Spindle replaced/renewed a few years ago for nearly €30,000Tool Changer: 36 positions, movable in Y-directionConnected Load: 69 kVAVoltage: 3x400V/230V/N/PE, 50 HzControl Voltage: 24 V DCFuse Protection: max. 125 AAdditional Equipment:External band filter coolant system Type SA 25/600 (30 bar, 400 Liters)Slat conveyor chip conveyor Type FSB 300 (discharge height 1200 mm, left side)Minimum quantity lubricationElectric handwheel HR 4103D Touch Probe Type MP 10 EVisport (Fabrikat Hema)Heat exchanger Type SK3328 (Fabrikat Rittal)2 Hand spray guns Technical Specification Taper Size SK 40 Knsdpfx Aqez Iyppspjc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 35 kVA, torque: 70 Nm, controller manufacturer: Siemens, controller model: SINUMERIK 828D (z interfejsem ShopMill), workpiece length (max.): 1,000 mm, workpiece width (max.): 600 mm, workpiece height (max.): 780 mm, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 2,900 mm, total width: 2,100 mm, table width: 600 mm, table length: 1,160 mm, table load: 1,000 kg, rotational speed (max.): 10,000 rpm, overall weight: 6,800 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 780 mm, spindle motor power: 11,000 W, number of spindles: 1, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: USB port, cabin, centralized greasing system, chip conveyor, documentation/manual, lighting, rotational speed infinitely variable, type plate available, TBI VC 1060 Smart Mill New Line – Vertical CNC Machining Center We have for sale a vertical CNC machining center, the TBI VC 1060 Smart Mill New Line, equipped with a Siemens 828D + ShopMill control system and a 15-inch touch panel. The machine features an SK40 spindle up to 10,000 rpm, a 24-position tool magazine with a fast, dual-arm tool changer, and digital axis drives. Linear guides in the X/Y/Z axes provide rapid traverse rates up to 36 m/min. Key technical data: - Control system: Siemens 828D + ShopMill Knjdpfx Aqsz Iymzspoc - Operator panel: 15" touch panel - X-axis travel: 1000 mm - Y-axis travel: 600 mm - Z-axis travel: 650 mm - Table surface: 1100 × 500 mm - Max. table load: 1000 kg - T-slots: 5 × 18 × 100 mm - Spindle nose to table distance: 140–790 mm - Spindle taper: SK40 - Max. spindle speed: 10,000 rpm - Spindle drive power S1/S6: 11/23 kW - Spindle drive: AC, belt drive - Rapid traverse X/Y/Z: 36/36/36 m/min - Positioning accuracy: ±0.005 mm - Positioning repeatability: ±0.003 mm Tool magazine - Type: drum type - Number of positions: 24 - Tool changer: fast, dual-arm - Max. tool diameter: 80 mm - Max. diameter with free adjacent position: 150 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg Equipment - Siemens 828D + ShopMill control system with 15" touch panel - Threading without a compensating chuck - Spindle-through coolant at 20 bar - Spindle temperature stabilization - Spindle air blow system - Tool cooling with air and coolant - Linear roller guides for X/Y/Z axes - Telescopic guides for X/Y/Z axes - Pneumatic counterbalancing for the Z-axis - Digital axis drives - Oil skimmer - Data transmission V.24 / RS232-C / USB - Manual spray guns for rinsing the work area - Electrical cabinet cooling - Central lubrication system - Lower chip flushing system - Integrated chip conveyor with cart Cooling system - Tank capacity: 300 l - Flow rate: 200 l/min - Spindle-through cooling: 20 bar Dimensions and weight - Machine dimensions (L × W × H): 2900 × 2100 × 2800 mm - Weight: 6800 kg - Total power consumption: 35 kVA Year of manufacture: 2020 Location: Krakow Price: 45,000 EUR The machine is available for sale. Additional photos, technical documentation, and detailed information regarding equipment and terms of sale can be provided.

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC machining center Hedelius C100 -3500 Magnum Control system: Heidenhain iTNC 530 Year of manufacture: 2009 Internal machine number: 79 Travel ranges: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping surface 4,150 x 1,000 mm Swinging operation: 2 x 1,450 x 1,000 mm Table load: approx. 4,500 kg Tool holder: HSK 63 Tool magazine: 70 positions Spindle speed: 20 – 12,000 rpm Accessories - Operating panel - Chip conveyor - Paper band filter system Kjdsz Ixndepfx Aqpenc - 20 bar coolant system

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,100 mm Travel range, Y-axis: 720 mm Travel range, Z-axis: 600 mm Table size: 2,800 × 650 mm Rapid traverse rate, X-axis: 30 m/min Rapid traverse rate, Y-axis: 30 m/min Rapid traverse rate, Z-axis: 30 m/min Spindle speed: 8,000 rpm Knsdpfxsz Irpho Aqpjc Tool holder: ISO 40 Tool capacity: 30 MACHINE DETAILS Control system: Siemens Coolant pressure: 25 bar EQUIPMENT High-pressure coolant system through the spindle and at the flange side Additional coolant tank Chip conveyor with scraper belt

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW Knedpfx Aqez Indhepsc • Tool holder: SK 40 Tool magazine • Tool positions: 30 • Max. tool length: 300 mm

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 2,450 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 850 mm, table width: 950 mm, table length: 2,700 mm, overall weight: 23,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Knsdpfx Aqoz H Nmbspec

Condition: used, Year of construction: 2003, operating hours: 56,616 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 3,000 m/min, rapid traverse Y-axis: 3,000 m/min, rapid traverse Z-axis: 3,000 m/min, feed length X-axis: 2,500 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 770 mm, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, nominal power (apparent): 40 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 6,500 mm, total width: 4,000 mm, table width: 1,000 mm, table height: 950 mm, table length: 3,220 mm, rotational speed (min.): 30 rpm, rotational speed (max.): 8,000 rpm, overall weight: 21,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 40, tool length: 380 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this used Hedelius BC100-2500 vertical machining center, manufactured in 2003. Key data: Manufacturer: HEDELIUS GmbH Type: BC 100/40-2500 Year of manufacture: 2003 Power requirement / voltage: 40 kW / 400 V / 50 Hz (40kVA) Total weight: 21000 kg Space requirements: Length: 6.50 m Width: 4.00 m Height: 3.70 m Control system: Program input: HEIDENHAIN Control: iTNC 530 NC software version: 340422 11 SP5 PLC software version: BC100_V1.2 Operating hours: Control on: 67335 Machine on: 56616 Program runtime: 18289 Travel distances: X-axis: 2500 mm Y-axis: 1000 mm Z-axis: 770 mm Feed rate: X-axis: 3000 mm/min Y-axis: 3000 mm/min Z-axis: 3000 mm/min Rapid traverse: 3000 mm/min Workpiece clamping area - fixed machine table: Length: 3220 mm Width: 1000 mm Work table: T-slots: DIN 650 Slot width: 22 mm Slot spacing: 200 mm Number: 5 Table height: Fixed machine table: 950 mm Tool magazine: Magazine capacity: 40 positions Max. tool diameter: Ø 80 mm (with available empty slots): Ø 125 mm Max. tool length: 380 mm Max. individual weight: 15 kg Total magazine weight: 600 kg Spindle: Speed range: 30 – 8000 rpm Mount: SK 40 Knsdpfx Aqoz H Hwkspoc Special accessories: Scraper belt conveyor: AME GmbH Total length: ≈ 6660 Height: ≈ 1760 Depth: ≈ 740 Belt filter system: (High-pressure coolant system) Model: PS 120 Tank capacity: 780 l Output: 120 l/min Filter fleece: 670 mm 100 m on roll Length: ≈ 2320 Height: ≈ 1060 Depth: ≈ 850 Control cabinet - cooling unit: Manufacturer: Pfannenberg Type: DTS 7241 Model No.: 217943 Wireless measuring probe: Manufacturer: HEIDENHAIN Model: TS 632 Type: Infrared measuring probe Mount: SK 40 If you have any questions or need more information, please send us a message or call us.

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Drive power: 18/26 kW Tool changer: 40-station Knsdpfoz Hzbqsx Aqpoc Table clamping surface: 2100 x 1600 mm Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function

Condition: used, Year of construction: 2009, operating hours: 61,894 h, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 2,340 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, nominal power (apparent): 25 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,250 mm, total length: 6,200 mm, total width: 3,700 mm, table width: 750 mm, table height: 930 mm, table length: 1,400 mm, rotary table diameter: 800 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 12,000 rpm, overall weight: 16,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 330 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We offer this used Hedelius RS 80-K-2300 5-axis machining center, manufactured in 2009. Key Data Manufacturer HEDELIUS GmbH Type RS 80-K-2300 Year of Manufacture 2009 Power Requirement / Voltage 29 kW / 400 V / 50 Hz (25 kVA) Total Weight 16000 kg Footprint Length 6.20 m Width 3.70 m Height 3.25 m Control System Program Input HEIDENHAIN Controller iTNC 530 NC Software Version 340490 04 SP4 PLC Software Version RS80_K V1.54 Development Level L4 Operating Hours Control System On 63333 Machine On 61894 Program Run Time 28295 Travel Ranges (Total Working Area) X-Axis 2340 Y-Axis 800 Z-Axis 600 Right Working Area (Fixed Machine Table Area) X-Axis 945 Y-Axis 800 Z-Axis 600 Left Working Area (Rotary/Swivel Table Area) (simultaneous machining possible) X-Axis 800 Y-Axis 800 Z-Axis 600 A-Axis +10° / -90° C-Axis 0 - 360° Clamping Surface - Fixed Machine Table Length 1400 Width 750 Clamping Surface - Rotary/Swivel Table Length Ø 800 Knsdpfx Ajz Hx Ihoqpsc Width 630 Work Table T-Slots DIN 650 Slot Width 18 / 18 mm Slot Pitch 125 / 125 mm Number 5 / 5 Table Height Fixed Machine Table 930 mm Celox Motor Spindle Manufacturer Kessler Type DMS 100.XL-633.607 Speed Range 50 – 12000 rpm Tool Shank SK 40 Tool Magazine Magazine Capacity 30 tools Max. Tool Diameter Ø 80 mm (with available free slots) Ø 125 mm Max. Tool Length 330 mm Max. Individual Tool Weight 15 kg Total Magazine Weight 450 kg Special Accessories Scraper Conveyor AME GmbH Total Length ≈ 5700 Height ≈ 1760 Depth ≈ 830 Weight 515 kg Band Filter System (High-Pressure Coolant System) Model PS 120 Tank Capacity 780 l Flow Rate 120 l/min Filter Fleece 670 mm 100 m on a roll Length ≈ 2320 Height ≈ 1060 Depth ≈ 850 Weight 515 kg Motor Spindle - Cooling Unit Manufacturer Hyfra GmbH Type Chilly-25-S Machine No. 09010098 Year of Manufacture 2009 Weight 65 kg Control Cabinet - Cooling Unit Manufacturer Pfannenberg Type DTS 7101 SC Model No. 08390173726 Laser Light Barrier Manufacturer BLUM Type P87.0634 Laser System MINI – MICRO - NANO Wireless Measuring Probe Manufacturer HEXAGON Model m&h Radio-wave Touch Probe Type RWP20.50-M Extra KinematicsOpt HEDELIUS Transformation Kit If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2009, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC 530, workpiece weight (max.): 4,500 kg, total height: 3,500 mm, total length: 8,500 mm, total width: 3,500 mm, table width: 1,000 mm, table length: 4,150 mm, table load: 4,500 kg, overall weight: 25,000 kg, coolant supply: 20 bar, spindle motor power: 24,000 W, number of slots in tool magazine: 40, Equipment: chip conveyor, 3-axis CNC machine (VMC) Hedelius - C100 Magnum MACH-ID 9819 Make: Hedelius Type: C100 Magnum Control: HeidenHain iTNC 530 YOP: 2009 incl. Coolant system with 20 bar IKZ incl. Paper filtration system Kodoz Hkg Nepfx Aqpjnc incl. Heidenhain HR 410 Remote Handwheel   X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK-63ISO/Bt/Mk Power on spindle: 24kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 8500mm Width: 3500mm Height: 3500mm Weight: 25000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Knedpfx Ajz Ha H Seqpjc Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Additional equipment • Chip conveyor Kjdpfez E Ramsx Aqpenc Machine Benefits Technical Machine Benefits • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

Condition: excellent (used), Year of construction: 2018, Manufacturer: TEKNA Model: TKE 984-6 Design: RFT Year of manufacture: 2018 Machine type: CNC machining center with moving gantry Axes: 4 Suitable for: Drilling, milling, threading, and machining of aluminum, PVC, light metal, and steel profiles X-axis travel: 6,700 mm Y-axis travel: 1,350 mm Z-axis travel: 610 mm Swivel range of machining head: -90° to +90° Positioning resolution of swivel axis: 0.01° Electro spindle: 9 kW Max. spindle speed: 24,000 rpm Max. torque: 14.3 Nm Tool interface: HSK 63F Spindle cooling: Water cooling with chiller Clamping devices: 6 clamps Automatic positioning of the clamps via the X-axis Tool magazines: 3 fixed magazines Tool positions: 14 per magazine / total 42 tool positions Chip conveyor: Rubber belt chip conveyor, design 6,700 mm Measuring system: 3D measuring system for multiple scanning Additional tank for lubrication system: 15 liters Integrated cabin Separate electrical control cabinet Glass scale on the X-axis Customer-specific clamping device system for profiles X-axis with 2 motors in master/slave configuration Laser length measuring tool instead of the standard version 2 feed pipes for lubrication Multi-part machining Ksdez Er Hhspfx Aqponc Double-mode operation / machining in two work areas Parallel machining of two profiles possible Drilling capacity aluminum AL99: max. Ø 20 mm Drilling capacity steel FE370 D FF: max. Ø 14 mm Straight milling aluminum AL99: max. 15 mm material thickness Straight milling steel FE370 D FF: max. 5 mm material thickness Thread cutting aluminum: up to M12 Thread cutting steel: up to M8