Caksan Makina

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total width: 1,600 mm, wire diameter (max.): 0.3 mm, overall weight: 2,500 kg, product length (max.): 1,800 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis CHARMILLES TECHNOLOGIES Robofil 290P was manufactured in 1999. It features a travel range of 400 mm x 250 mm x 200 mm and can accommodate a maximum workpiece weight of 500 kg with dimensions of approximately 850 x 500 x 200 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES TECHNOLOGIES Robofil 290P machine we have for sale. Contact us for further details. • UV-axes (taper): 400 x 250 mm • Max. workpiece weight: 500 kg • Max. workpiece dimensions: approx. 850 x 500 x 200 mm • Automatic wire threading: Yes • Control system: Charmilles Additional equipment Crsdpfx Ajy Ifl Ienwob • Extended filter system • Automatic restart • Cross rail • Wire tension measuring device

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, wire diameter (min.): 0.1 mm, TECHNICAL DETAILS Travel X-axis: 400 mm Credpsy Emxqofx Anweb Travel Y-axis: 300 mm Travel Z-axis: 220 mm Travel U/V-axis: 120 mm Cutting angle at 87 mm: ±30° Cutting angle at 200 mm: ±15° Wire diameter: 0.1-0.3 mm Max. workpiece dimensions: 810 mm x 700 mm x 200 mm MACHINE DETAILS Operating hours: 28,500 h Machine weight: 2,700 kg

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, The EDM32 wire electrical discharge machine is a precision device designed for electro-erosion machining of electrically conductive materials. It is ideal for the production of tools, molds, and components requiring high accuracy and surface quality. Csdjy A N Ezepfx Anwjrb The machine enables efficient cutting of complex shapes in both single-piece and serial production. Thanks to its stable construction and well-optimized operating parameters, the EDM32 ensures high productivity and repeatability of the machining process. The device allows cutting at angles up to ±6°, increasing its technological versatility. The use of wire with a diameter of 0.12 to 0.25 mm enables precise machining of even highly demanding components. The machine provides good surface finish quality at the level of 1.6–2.5 Ra, reducing the need for additional processing. High cutting efficiency and stable wire speed ensure optimal performance. The robust construction and maximum table load of up to 400 kg allow machining of heavier workpieces without loss of accuracy. Technical data Table travel: 440 × 350 mm Table size: 380 × 650 mm Max cutting height: 400 mm Wire diameter: 0.12 – 0.25 mm Taper cutting: ±6° Max cutting efficiency: 120 – 150 mm²/min Surface roughness: 1.6 – 2.5 Ra Machining power: 2 kW Wire speed: 11 m/s Max table load: 400 kg Weight: 1150 kg Machine dimensions: 1650 × 1150 × 1700 mm Applications Mold and die production Toolmaking industry Precision metal machining Production of complex geometry parts

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm MACHINE DETAILS Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Crsdpfoyz Rxasx Anwjb Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350900, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 400 mm Travel U-axis: 400 mm Travel V-axis: 250 mm Cedpfx Asyz Rvlenwerb Workpiece weight: 1,000 kg Workpiece height (max.): 400 mm Workpiece width (max.): 500 mm Workpiece length (max.): 850 mm Taper angle: +/- 30° at 400 mm height MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,600 x 2,230 mm Machine weight: 2,500 kg Standard wire guides: 0.25 mm EQUIPMENT Collision protection in X/Y/U/V/Z

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis 400 mm Y-axis 300 mm Z-axis 220 mm Crodpfx Ansyvtbyewob The machine is still in daily use; only the "automatic threading" function is not working.

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 400 mm, travel distance Z-axis: 250 mm, total height: 2,430 mm, total width: 3,340 mm, wire diameter (max.): 0.3 mm, overall weight: 4,170 kg, product length (max.): 4,010 mm, number of axes: 4, wire diameter (min.): 0.05 mm, This 4-axis CHARMILLES ROBOFIL 4030 Si was manufactured in 1999. It features a maximum workpiece dimension of 1200 x 700 x 400 mm and can handle a weight of up to 1500 kg. The machine is equipped with a wire diameter range of 0.05 – 0.30 mm and a maximum cutting speed of 500 mm²/min. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 4030 Si machine we have for sale. Contact us for further details. • Workpiece: • Max workpiece dimensions: 1200 x 700 x 400 mm • Max workpiece weight: 1500 kg • Axes travels: • Y-axis: 300 mm Cedpfx Aoyvgl Tsnwjrb • U/V axes: ±48 mm • Wire EDM: • Max wire speed: 15 m/min • Max cutting speed: 500 mm²/min • Tank / dielectric: • Tank dimensions: 850 x 600 mm • Dielectric volume: ~800 l • Electrical: • Power consumption: 45 A

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Crjdpfx Aoyu Nqmsnwob Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 92568/331430, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, No reserve price – guaranteed sale to the highest bidder! Crjdpfxsyr Nkne Anwsb Submitting a bid obligates the buyer to collect the item within the specified period, between 04/05/26 and 07/05/26. TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm U-axis travel: 400 mm V-axis travel: 250 mm Taper angle/height: ±30°/200 mm Max. workpiece dimensions: 850 mm x 500 mm x 200 mm Max. workpiece weight: 500 kg Table dimensions: 720 mm x 500 mm Distance floor to table: 1,000 mm MACHINE DETAILS Control: CHARMILLES Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,400 x 2,200 x 2,100 mm Door width: 900 mm Weight: 2,500 kg External reference: 59

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, - CHMER-FANUC Control - Max. workpiece dimensions: 800 x 560 x 215 mm - Max. workpiece weight: 350 kgs - X-axis travel: 400 mm - Y-axis travel: 250 mm - Z-axis travel: 220 mm - U/V axis: 60/60 mm - Maximum chamfer cut: +/-14.5 degrees - Wire feed speed: max. 330 mm/s - Machine dimensions (L x W x H): 2100 x 2600 x 2000 mm - Machine weight: approx. 2700 kg Accessories - EROWA collection system - Cooling water system - Dielectric cooler - Machine documentation Cedpoyr H Rfefx Anworb A robust, precise, and high-quality Taiwanese wire EDM machine is for sale. The machine was used by a small family business that closed at the end of last year.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, total width: 1,990 mm, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 31i-WB, number of axes: 5, Wire EDM machine manufactured in 2018. This FANUC Robocut alpha-C400iB offers advanced cutting capabilities. If you are looking to get high-quality wire EDM capabilities, consider the FANUC Robocut alpha-C400iB machine we have for sale. Contact us for further details. • Workpiece capacity: max dimensions 730 × 630 × 250 mm; max workpiece weight 500 kg • Axis travel: U/V 120 × 120 mm • Machining capability: max taper angle ±30°/80 mm; minimum drive increment 0.0001 mm; wire diameter Ø0.10–Ø0.30 mm; max wire spool weight 16 kg • Controller: FANUC 31i-WB; part program storage 4 MB Codpjypma Iefx Anwerb • Acoustic noise: LPA 64 dB; LPCpeak 81 dB • Optional specifications: • Thin wire option: wire diameter Ø0.05–Ø0.07 mm • Automatic front door option: max workpiece dimensions with auto door 730 × 585 × 250 mm • 45° die guide option: max taper angle ±45°/40 mm • 30 kg wire feed unit option: max wire spool weight 30 kg • Installation conditions: • Power supply: AC 200V ±10%, 3-phase, 50/60 Hz ±1 Hz; AC 220V ±10%, 3-phase, 60 Hz ±1 Hz; connection cable terminal size 8-5; power consumption 13 kVA • Air supply: 0.5–0.7 MPa; 100–110 L/min (minimum 120 L/min with thin wire option); regulator-side coupler mounting screw Rc1/4 • Environment: 15–30°C (recommended 20 ±1°C for high-precision machining); oil-mist-free and dust-free; humidity ≤75% RH • Grounding: Type C; max grounding resistance 10 Ω; must be grounded independently from other machinery • Shield room requirement: If electrical discharge noise interferes with nearby radio, television, or electronic equipment, a shielded room must be installed

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, wire diameter (max.): 0.3 mm, overall weight: 2,300 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA AE 400 wire EDM machine was manufactured in 2005. It features a maximum workpiece dimension of 800 x 500 x 250 mm and can handle a maximum workpiece weight of 500 kg. The machine also includes a dielectric tank capacity of 600 liters. If you are looking to get high-quality wire EDM capabilities, consider the ONA AE 400 machine we have for sale. Contact us for further details. • U/V axis travel: 80 x 80 mm • Max. workpiece dimensions: 800 x 500 x 250 mm • Max. workpiece weight: 500 kg • Max. taper angle: ±20° (at 100 mm height) Csdsymal Eopfx Anworb • Dielectric tank capacity: 600 liters

Condition: used, Year of construction: 2013, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces. Probe, Automatic central lubrication, Coolant system for dielectric fluid, Automatic fire extinguishing system, Mist extractor, Machine lamp. Cutter outside diameter: Max. 320 mm Cjdpeylkvlefx Anwsrb Shank tool diameter: 10-320 mm Outside diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm Tool weight: max. 20 kg X axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis rotation range: 360 ° E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2280 mm Weight approx.: 4800 kg Connected load: 5,4 kW colour: gray RAL 7035/7043

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Codpfex Hghuex Anwsrb incl. chiller Automatic wire threading Water bath

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Codpfxexy Rx Is Anwjrb Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Crodpfx Aexy Rxhonwsb Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 00402, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 162 mm, workpiece width (max.): 760 mm, workpiece length (max.): 1,100 mm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! This machine is being auctioned as part of an operational closure. Placing a bid obliges the buyer to collect the item within the specified period from 26/01/2026 to 29/01/2026! TECHNICAL DETAILS Travel X-axis: 450 mm Travel Y-axis: 320 mm Travel Z-axis: 162 mm U-axis travel: ± 50 mm V-axis travel: ± 50 mm Max. workpiece dimensions: 1,100 x 760 mm Max. load capacity: 500 kg Max. workpiece height during immersion: 200 mm Max. workpiece height between wire guides: 360 mm Max. workpiece height for wire threading: 200 mm Tank dimensions: 1,150 x 200 x 2,280 mm Tank capacity: 1,000 l Measuring resolution: 1 µm Max. manual speed: 15 mm/s MACHINE DETAILS Control system: CHARMILLES Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 9 A Cedpfxoxqpvyj Anwjrb Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,700 mm Weight: 5,000 kg EQUIPMENT Matching workshop drawer cabinet Corresponding accessories Documentation

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg C‑Axis: full rotation – ideal for rotary electrodes Crjdpfxewww Sxo Anwob

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM wire The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Codpfjwr Utiex Anwsrb Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2758, TECHNICAL DETAILS Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25 mm wire) Control unit: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC “ADVANCE Plus” Replacement of X and Y linear scales: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of current: Three-phase Input frequency: 50 Hz Csdpfxewr Aclj Anwjrb EQUIPMENT - ODS optical drive system - Direct drive motors for the X and Y axes - Linear scales on the X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening unit - Automatic wire cutter (for thicker wires) - Automatic hole detection - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC precision machining (Precise Finish Circuit) - LLS longevity system - 10 kg wire spool holder (reel) - U-shaped, hardened, segmented receiving table - Compressor dielectric (water cooling) - Preparation for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming with ESPERADVANCE interactive dialog system - Control unit prepared for receipt of 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld control device - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB Control Travel paths: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, Max. workpiece weight 500 kg, Machine weight 1,700 kg, Power supply 13 kVA The machine can be inspected while powered. Crjdpfx Aewl Hiijnweb

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg Crsdpfx Anjuzbaysweb The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Year of construction: 2007, condition: excellent (used), Makino SP 43 CNC control MGW-R Travels X: 450 mm Y: 300 mm Z: 320 mm U/V axis: +/- 101 mm Codpfxsiv H Dqs Anwjrb table: 730x580 mm tub: 890x850 mm max.workpiece weight: 900 kg dimensions approx: LxWxH 3000x3000x2300 mm weight approx: 3400 kg

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 Credpfxsik Hb To Anweb The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! We do not know what is the probleme!