Em Plast 08 LTD

Year of construction: 2017, condition: used, Manufacturer : Eclipse Magnetics Model : Housed Grid ECHD150 Type : Housed Easy Clean Grid Magnetic Separator Year: 2017 Atex : Ex II1/2DcTX + II1/2GIICcTX Input / output : Ø 150 mm Dwodpfx Aaj Aiwcyerod Machine dimensions with base: 100 x 90 x 120 cm Machine dimensions without base: 208 x 214 x 270 mm Weight : 40 kg

Condition: used, mileage: 101,246 km, power: 140 kW (190.35 HP), first registration: 05/2023, fuel type: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 3, Equipment: ABS, central locking, cruise control, differential lock, electronic stability program (ESP), onboard computer, power assisted steering, seat heater, soot filter, spoiler, tail-lift, trailer coupling, MAN TGL 8.190, permissible total weight 7,490 kg, automatic transmission, box body manufactured by SAXAS, payload 2,201 kg, interior height (portal box body) 2.33m, interior length of box body 6.07m, interior width of box body 2.48m, tail lift DHOLLANDIA, load capacity 1,000 kg, Euro6, green emission sticker, trailer coupling, ball hitch on cross member for 40mm drawbar, lane keeping assist, cruise control, LED daytime running lights, headlight range adjustment, electrically adjustable exterior mirrors, brake assist, adjustable steering column, differential lock, 12 V socket in the cab, 24 V socket in the cab, ABS socket for trailer at the rear, 15-pole trailer socket at the rear, hill start assist MAN EasyStart, double cup holder at the front, compressed air connections at the rear, electronic braking system EBS, driver's seat with air suspension, power windows, driver and passenger side, remote control for air suspension of rear axle on the driver's seat, remote control for control of lift platform, footrest on lift platform, speed limiter: electronic 89km/h + 1km/h tolerance (engine control), rear axle with air suspension, interior lighting in the box body, MAN loudspeaker system, MAN Media Truck, underrun protection on the left and right sides under the box body, reinforced front wall inside the box body, front axle with leaf spring suspension, cigarette lighter. Note: Dwjdpfs Aiwatex Aarod Despite careful checking of all our price indications, errors still occur. These are sometimes caused by transmission errors in the systems of the various platform providers. But errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price indication also cannot be declared as a component of the contract. If you place particular importance on a specific feature of our advertisement, please let us know when concluding the contract. Thank you for your understanding!

Condition: excellent (used), mileage: 297,247 km, first registration: 03/2010, fuel type: diesel, fuel: diesel, color: orange, gearing type: mechanical, total length: 5,200 mm, total width: 1,800 mm, total height: 1,800 mm, = Additional options and accessories = - PTO = Notes = Despite our careful attention to entering the data correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual vehicle. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further information = Number of doors: 2 Year of manufacture: 2010 Engine displacement: 2,494 cc Dedpo Aiv T Ujfx Aarswd Unladen weight: 2,220 kg Payload: 520 kg Gross vehicle weight (GVW): 2,740 kg Technical condition: very good Optical condition: very good Please contact Thierry Leemans for further information.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, HÖFFMANN DÜBELFIX DBL Dowel and Slot Drilling Machine In very good condition, this machine comes from a small carpentry shop, and everything is in its original condition; it has only been cleaned. It can be used to mill slots and drill dowel holes on two levels without reclamping. 380V, 1500W Speed: 2850 rpm Year of manufacture: 1991 With this machine, you can mill slots for, e.g., lock boxes and similar items, and produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. Drilling on two levels, the grid and stops, and the machine's design allow dowel joints to be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Rotates clockwise. Mills and drills very well and cleanly. Comes with 2 angle stops integrated into the machine table and 2 additional stops on the left and right outside of the table. Additionally, you will receive a round stop rail, 2000mm long with a folding stop. This stop rail can be used on both sides, and when switching from one side to the other, the folding stop does not need to be readjusted. The workpiece is clamped using 2 pneumatic clamping cylinders, and the switches are located directly on the clamping cylinders. The height adjustment from one drilling level to another is also pneumatic; the pneumatic switch for this is located at the top of the adjustment lever for the grid. This ensures a quick adjustment of the grids and the drilling levels. Comes with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right. The 2 drilling levels each have a scale with a height indicator, making it easy, quick, and accurate to adjust the height of each drilling level. It can be quickly converted for slot milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 320mm. The machine has a stop rail at the front of the machine table, which can be adjusted downwards if required. The max. drilling hole height is approx. 150mm. The max. drilling hole depth is approx. 120mm, with a drilling depth stop. The max. workpiece height is approx. 250mm. Everything is in perfect working order. We will personally deliver and demonstrate the machine throughout Germany for 220.00 euros, so you have no risk when buying. Delivery to Austria and the EU is also possible upon request. The machine table is 800mm wide and 250mm deep. Professional equipment, not cheap DIY junk. Comes with instructions. You can start working with the machine immediately. Comes with a 2-jaw drill chuck up to 20mm. Very stable and durable construction. Dwsdpfx As Aiv T Hoarod The precision guides with play-free ball bearing bushes are in good condition and move smoothly. Very stable and rigid design.

Year of construction: 1998, condition: used, Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Variable speed drive   Dwodpfx As Aiv Szoarod Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, …  

Condition: used, mileage: 4,255 km, power: 103 kW (140.04 HP), first registration: 03/2026, fuel type: diesel, maximum load weight: 1,143 kg, overall weight: 3,500 kg, next inspection (TÜV): 03/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, number of seats: 3, total length: 6,830 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,960 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, truck registration, Technology & Safety: * Electrically adjustable and heated exterior mirrors * LED headlights * LED daytime running lights * Climatic air conditioning system * Front and rear parking assist * Rear view camera * Permissible total weight 3.50 t * Spare wheel with road tire * Convex exterior mirror - right * Emergency call system * Airbag for driver/passenger side - passenger airbag can be deactivated * Electrically operated front windows * Central locking with remote control and internal operation * Folding remote key (2) * Interior lights in the cab: LED * Interior lights in the cargo/passenger compartment: LED * Engine immobilizer (electronic) Interior: * Leather steering wheel with multi-function and gearshift function * Driver comfort seat with armrest and lumbar support * Double passenger seat with storage/tray compartment and backrest that can be folded down to create a stowage table * Composition audio system (radio - touchscreen color display - USB interface) * Multimedia interface 2 USB-C (center console) with increased charging power - 2 USB-C charging ports (center - windshield) Dwedpfxj Aiv Sle Aared * Multifunction display Plus * Infotainment system with touchscreen color display 26 cm (10.4 inches) Exterior: * Sliding door for cargo/passenger compartment, right side Warranty: 24 months from the date of initial registration. Information about the manufacturer: MAN Truck & Bus SE, MAN, Dachauer Straße 667, 80995 Munich. Note: This offer is subject to prior sale and errors. Only the agreements in the order confirmation or the purchase contract are binding. Please contact our sales staff for detailed information on the exact equipment, mileage, and selling price.

Condition: excellent (used), mileage: 328,628 km, power: 250 kW (339.91 HP), first registration: 03/2004, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro3, number of seats: 2, loading space length: 7,920 mm, loading space width: 2,490 mm, Equipment: crane, electric window regulation, power mirror, = Additional options and accessories = - Additional steering axle - Aluminum fuel tank - Enhanced engine brake - Leaf spring - Sun visor = Remarks = Crane Number of hydraulic extensions: 7 Number of manual extensions: 1 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Winch: ✓ Meter capacity: 19 m Capacity kilo: 11500 kg = More information = General information Number of doors: 2 Year of construction: 2004 Cab: single Registration number: 1BVH001 Technical information Number of cylinders: 6 Engine capacity: 12.130 cc Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 21.540 kg Carrying capacity: 10.460 kg GVW: 32.000 kg Functional Crane: FASSI F360XP, year of manufacture 2003, behind the cab Height of cargo floor: 127 cm Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Dwodpfxs Aiv Sde Aarjd = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Dode Aiv Rcjpfx Aarjwd

Condition: good (used), Year of construction: 1970, functionality: fully functional, Data : Tip width 300 mm Tip height 150 mm Dsdpfe Aiv Nmox Aarjwd External grinding spindle 4.0 kW Grinding wheel max. 400 x 80 x 127 mm Spindle cone MK4 Workpiece headstock 0.55 kW Workpiece speeds 30 - 450 rpm Internal grinding spindle 1.5 kW

Condition: used, mileage: 133,715 km, power: 130 kW (176.75 HP), first registration: 04/2008, fuel type: diesel, empty load weight: 5,930 kg, maximum load weight: 3,570 kg, overall weight: 9,500 kg, tire size: 335/80 R 20, axle configuration: 4x4, wheelbase: 3,080 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 3, loading space length: 2,400 mm, loading space width: 2,050 mm, loading space height: 400 mm, Equipment: additional headlights, air conditioning, all wheel drive, cabin, differential lock, hydraulics, power assisted steering, trailer coupling, Vehicle location: en route / in transit, short cab, 1 air suspension seat, double bench seat, rear window, electric mirrors, heated mirrors, air conditioning, Telligent shifting system, auxiliary drive, raised exhaust, differential lock, long-range headlights, work lights, rotating beacon, trailer hitch (air, light, hydraulic), trailer hitch ball, aluminum fuel tank, winter service equipment, lashing eyes Dwjdpfxs Aiv H Sj Aarsd Wheelbase: 3080 mm, Body: 3-way tipper body with aluminum side panels, foldable, Transmission: DC-8-speed power shift transmission UG100, permanent all-wheel drive with lockable longitudinal differential, operating hours: 7,021 hours, front mounting plate size 3, Hydraulics: two-circuit proportional hydraulic system, 3-section hydraulic system, 2 hydraulic quick couplings at the front, section 3, 4 hydraulic quick couplings at the front, sections 1+2, separate return line at the front, pressure line + separate return line in the middle, 2nd circuit, hydraulic quick coupling at the rear, 2, section 3, pressure line at the rear, for 2nd hydraulic circuit, separate return line at the rear, snow plow relief valve, data subject to change as the Unimog is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, Year of construction: 2000, bore capacity in steel (diameter) 13 mm Dsdpfxj Aiv H Ij Aarewd weight 40 kg

Condition: excellent (used), x-travel 16500 mm y-travel 2000 mm z-travel 1200 mm Control HEIDENHAIN TNC-640 spindle speed: 4000 U/min. rapid traverse 25 m/min tool change unit 60 Dwodpfxo Aiv Hno Aarsd coolant IKZ dividing each Kopfachse 2,5° tool taper ISO SK-50 total power requirement 68 kVA weight of the machine ca. 51 t

Condition: excellent (used), mileage: 328,628 km, power: 250 kW (339.91 HP), first registration: 03/2004, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro3, number of seats: 2, loading space length: 7,920 mm, loading space width: 2,490 mm, Equipment: crane, electric window regulation, power mirror, = Additional options and accessories = - Additional steering axle - Aluminum fuel tank - Enhanced engine brake - Leaf spring - Sun visor Dedpfx Aaj Aiv Emorjwd = Remarks = Crane Number of hydraulic extensions: 7 Number of manual extensions: 1 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Winch: ✓ Meter capacity: 19 m Capacity kilo: 11500 kg = More information = General information Number of doors: 2 Year of construction: 2004 Cab: single Registration number: 1BVH001 Technical information Number of cylinders: 6 Engine capacity: 12.130 cc Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 21.540 kg Carrying capacity: 10.460 kg GVW: 32.000 kg Functional Crane: FASSI F360XP, year of manufacture 2003, behind the cab Height of cargo floor: 127 cm Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Year of construction: 1987, Sawblade tiltable 45 ° Length of the rolling table 3000 mm cutting width 1050 mm Motor output 5,5 kW Cutting height 135 mm Saw blade diameter 400 mm Djdpfo Aiv Eisx Aarjwd Speed 3/4/5000 U/min. weight of the machine ca. 1000 kg

Condition: excellent (used), Year of construction: 2001, pressure 200 t chamfer lenght 4100 mm Dodpfx Aj Aiv Efoarswd distance between columns 3150 mm stroke of upper beam 200 mm throat 300 mm dayligth 450 mm working feed 8.0 mm/sec return speed 80.0 mm/sec 265 bar Control BC GRAPHIC work height max. 965 mm total power requirement 18.7 kW weight 14.800 kg range L-W-H 4400 x 1900 x 3000 mm From a maintenance workshop In good/well-maintained condition (!!) Equipment: - CNC-controlled hydraulic press brake - Includes "ATLANTIC" CNC control system ("BC GRAPHIC") * Calculation of bending sequences * Positioning of the backgauge (X+R axes) * Positioning of the depth setting (Y1+Y2 axes) * Positioning of the gauge fingers (Z axis) * Capability to program various bending sequences * Visual representation of bending steps * Swiveling control panel (located at the front left) - CNC electro-hydraulic depth adjustment (Y1+Y2 axes) - CNC motorized backgauge (X axis) - CNC motorized adjustment of the gauge height (R axis) - CNC motorized adjustment of the gauge fingers (Z axes) - CNC motorized bed crowning (table crowning) - Upper tool clamping system – "AMADA/PROMECAM" * Includes 1x sectionalized set of upper tools - Lower tool clamping system – "AMADA/PROMECAM" * Includes 1x sectionalized set of 2V dies - Various additional bending tools - No side safety guards (hinged/swiveling doors) - Includes rear safety guard (sliding door) - 1x mobile two-hand/foot control unit - Operating manual (PDF)

Condition: used, Year of construction: 2005, turning diameter over bed 320 mm turning diameter over slide rest 190 mm turning length 920 mm center height over bed 160 mm turning diameter in the gap 430 mm centre distance 920 mm spindle bore Ø 38 mm turning speed range 65 - 1800 U/min power requirement 1,5 kW 3-jaw-chuck diameter 160 mm Dedps Aiv Ebefx Aarewd taper in tailstock-quill MK 3 quill stroke 100 mm voltage 400 V weight of the machine ca. 410 kg dimensions of the machine ca. 1,68 x 0,75 x 1,55 m Serial No. 531208 Year of manufacture 05/2005

Condition: used, Year of construction: 2007, operating hours: 98,000 h, clamping force: 80 kN, displacement volume: 61 cm³, injection pressure: 2,740 bar, overall weight: 3,900 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Dwodpfs Aiv D Tex Aarod

Condition: used, Year of construction: 2022, x-travel 750 mm y-travel 650 mm z-travel 560 mm control 840D sl Operate CELOS Siemens turning speed range - main spindle max. 20.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 Nm tool taper HSK-A 63 table surface area Ø 650 / 800 x 650 mm T-slots 9x 14 x 63 mm max. table load 600 kg rotatable 360 ° swivellable +/- 120 ° max. workpiecediameter 840 mm max. workpiece height 500 mm number of toolpositions 60 pos. tool taper HSK-A 63 Dwedpfx Aao Aiv Dtored max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 7 / 13 / 10 kN total power requirement 52 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 3,0 m 5-Axis Universal CNC Machining Center DMG MORI - DMU 75 monoBLOCK - From a company liquidation - Extensive accessory package - Fully equipped - Only approx. 1,726 spindle hours - Only approx. 6,092 power-on hours - 5-axis simultaneous machining - Precision package - Production package - MPC (Machine Protection Control) - 3D data model in STEP format - Digital Manufacturing Package - Interpolation turning - Chip flushing system in the workspace door

Condition: used, Year of construction: 2020, turning diameter 480 mm turning length 1.225 mm control SLIMline Operate Siemens greates pass round over bed 700 mm Swing dia. over traverse guideway 370 mm Max. rpm 3.250 min/-1 power capacity - main spindel 33 / 22 kW max. Torque 630 / 420 Nm spindle diameter in front bearing 150 mm max. bar capacity 102 mm chucking diameter 315 mm spindle nose A2-8 number of toolpositions 12 pos. tool taper VDI 40 driven statition 12 pos Spindle speed - driven tool stations max. 4.000 min -1 power capacity - driven tool-stations 5,44 kW Dwedpfs Aiv Dhjx Aarjd max. Torque 20 Nm number of toolpositions 6 pos. tool taper BT tailstock travel 1.200 mm taper of center MK 5 tension force 12 kN x-axis 307,5 mm y-axis +/- 60 mm z-axis 1.240 mm rapid traverse X: 30 m/min rapid traverse Y: 22,5 m/min rapid traverse Z: 30 m/min total power requirement 60 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 5,5 x 3,5 x 2,1 m CNC - Turning- and Millingcenter DMG MORI - CLX 550 V4 - from a business closure - extensive accessory package - fully equipped - only approx. 895 spindle hours - only approx. 4,901 power-on hours - chip removal package - "Alternating Speed" technology cycle - extensive accessory package

Condition: used, Year of construction: 2021, turning diameter 320 mm turning length 530 mm greates pass round over bed 610 mm control SLIMline Operate 4.7 Siemens Swing dia. over traverse guideway 400 mm Max. rpm 5.000 min/-1 Dwodpfxj Aiv A Ie Aarsd power capacity - main spindel 16,5 / 11,0 kW max. Torque 168 / 112 Nm spindle diameter in front bearing 120 mm max. bar capacity 65 mm max. chucking diameter 320 (250) mm chucking diameter 210 mm spindle nose A2-6 number of toolpositions 12 pos. tool taper VDI 30 driven statition 12 pos Spindle speed - driven tool stations max. 6.000 min -1 power capacity - driven tool-stations 5,44 kW max. Torque 15 Nm tailstock travel 550 mm taper of center MK 4 tension force 4 kN x-axis 242,5 mm y-axis +/- 40 mm z-axis 540 mm rapid traverse X: 30 m/min rapid traverse Y: 22,5 m/min rapid traverse Z: 36 m/min total power requirement 28 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 4,0 x 3,2 x 2,1 m CNC - Turning- and Millingcenter DMG MORI - CLX 350 V4 - From a facility closure - Extensive accessory package - Fully equipped - Only approx. 1,053 spindle hours - Only approx. 6,684 power-on hours - Chip removal package - "Alternating Speed" technology cycle - WITHOUT automation / robot

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,417 h, machine/vehicle number: 5667, load capacity: 227 kg, overall weight: 6,862 kg, tire size: 12-16,5, wheelbase: 2,200 mm, color: red, total length: 8,500 mm, total width: 2,430 mm, total height: 2,550 mm, drive type: 3 cylindre Deutz diesel engine, counter reading (black): 13,417, arm reach: 11,500 mm, working height: 16,000 mm, Equipment: all wheel drive, type plate available, Further details and images are available upon request. This description does not constitute a binding offer and may contain errors. Dedo Aivyzjpfx Aarewd No guarantee is provided regarding the accuracy of the information.

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Swift Cut (ESAB) Type: Pro 2500 Year of manufacture: 2023 Working area: 1,250 x 2,500 mm 1 plasma torch with Hypertherm Powermax 125 power source Cutting thickness up to approx. 30 mm Water table - no filter system required Table weight (empty): approx. 1,000 kg Table footprint: 3,226 mm × 1,840 mm Automatic torch height control (Intelligent Torch Height Control - ITHC) Dsdpfxj Aivxks Aarjwd Workpiece collision protection (Breakaway Head) and sheet alignment via software Compressed air requirements: Clean, dry air (ISO 8573-1 Class 1.2.2), 7.0–7.5 bar, approx. 300 l/min. Cutting software 101126

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Dwodpfx Ae Aivxgsarod

Condition: used, Year of construction: 1990, Automatic band saw Manufacturer: BEHRINGER Type: HBP 260A Year of manufacture: 1990 Technical specifications: Djdpfj Aivxcjx Aarewd Cutting diameter (round): 260 mm Cutting capacity (square): 260 x 260 mm Saw blade dimensions: 4,100 x 32 x 1.1 mm Cutting speed: 17 – 120 m/min Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, travel distance X-axis: 320 mm, travel distance Z-axis: 400 mm, Tool presetting device Manufacturer: ZOLLER Dsdpfx As Aivw Usarewd Type: Venturion 400 Technical specifications: Z-axis: 400 mm X-axis: 320 mm Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!