Overfil

Condition: good (used), Year of construction: 2007, chuck outer diameter: 600 mm, through hole: 120 mm, Metal cutting Tooling ROHM - SDT MACH-ID 2965 Make: ROHM Gusdpfxjzdiwye Akyjc Type: SDT Year: 2007 Diameter: 600mm 4 chuck: x Spindle bore:120mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), leveller ARKU RM 1825 with the dimensions: 250 x 2,00/5,00 mm, 18 mm diam. of the rolls, 19 rolls, under power tests with material is possible Gusdpfx Akezdiwtsyjc

Condition: good (used), functionality: fully functional, Year of construction: 2019, LiftMaster 1530 loading and unloading system for sale due to lack of use. Guodszdiwmspfx Akyoc It was previously used with an L20 CO2 laser.

Condition: new,

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2968 Make: TOS Type: SN / SIU Max. Diameter 250 Gedszdiv Aopfx Akyouc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2018, functionality: fully functional, operating hours: 6,612 h, pressing force: 135 t, table length: 3,000 mm, Equipment: documentation/manual, DURMA AD-R 30135 plate bending machine. It has been operated continuously in a single shift and has been regularly maintained. Gjdpfxozdivij Akyeuc Maximum bending length: 3000 mm, Pressing force: 135 tons.

Condition: ready for operation (used), Year of construction: 2007, Laminating press manufactured in 2007. This OTT SOLID 16-32 features plate dimensions of 3200 x 1600 mm and a total pressure of 160 t, with a daylight opening of 400 mm. If you are looking to get high-quality laminating capabilities, consider the OTT SOLID 16-32 machine we have for sale. Contact us for further details. • Plates dimensions: 3200 x 1600 mm Gsdjzdivcepfx Akysuc • Total pressure: 160 t • Daylight opening: 400 mm

Condition: excellent (used), Here we offer you an industrial robot. Gsdpfx Aozdiu Sskyjuc Max. payload: 6 kg Type: RX90 Controller: RX90 - CS7 Approx. weight: 360 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: as good as new (ex-display), functionality: fully functional, power: 32.36 kW (44.00 HP), first registration: 10/2024, fuel type: diesel, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, Year of construction: 2024, operating hours: 221 h, Equipment: car registration, cruise control, hydraulics,

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2969 Make: TOS Type: SN / SIU Year: 90 Max. Diameter 150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gjdpfxozdiuxe Akyjuc

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 130 mm, workpiece weight (max.): 500 kg, total height: 2,750 mm, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter Guedpfxozdiurj Akysc -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: reconditioned (used), Year of construction: 1996, Saw unit, manufacturer Linck, type KCS 6 Base frame with 4 saw spindle units Double spindle design with 6 adjustable saw heads Cutting height 325 mm, weight 12,400 kg Guedpfozdiulex Akysc The machine is currently being overhauled in our factory.

Condition: excellent (used), Here we offer a Mitsubishi Industrial 6-axis articulated arm robot. Mitsubishi Industrial 6-axis articulated arm robot 6-axis articulated arm robot RV-3SDB-S15 The RV-3SDB articulated arm robot The RV-3SB robot is specifically designed for handling loads of up to 3.5 kg. The encapsulation, which complies with the IP 65 standard, ensures operation under extreme conditions. Special features:
Adjustment of axis compliance to compensate for workpiece tolerances
Conveyor tracking
Sensorless collision detection
Encapsulated design
Adaptive speed optimization Feature/Function Degrees of freedom (number of axes) 6 Design: Standard (oil mist) Mounting: Floor, wall, or ceiling mounting possible (wall mounting with limitations in the J1 axis) Construction: Vertical articulated arm Drive system: AC servo (all axes with brake) Position detection: Absolute encoder Range of motion: Degrees Body (J1) 340 (-170 to +170) Shoulder (J2) 225 (-90 to +135) Elbow (J3) 191 (-20 to +171) Forearm rotation (J4) 320 (-160 to +160) Wrist bend (J5) 240 (-120 to +120) Wrist rotation (J6) 720 (-360 to +360) Motion speed: Degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm rotation (J4) 412 Wrist bend (J5) 412 Wrist rotation (J6) 660 Resultant maximum speed 5500 mm/s Lifting force Nominal value 3 kg, Maximum value 3.5 kg Reach radius (to the pivot point of the J5 axis) 642 mm Weight: 37 kg Robot controller Control CR1DA-721-S15 (230V) Teach pendant R46TB with color/touch display Technical data: Dimensions (W x H x D) 252 × 240 × 114 mm Weight 1.250 kg Connection type:  Connection to the robot controller via circular connector, cable length 7 m  Interfaces: RS422  For connection to the robot controller  Display/Screen:  Touch-sensitive 6.5" TFT monitor with backlight Gedpfx Aozdiukskyeuc and 640 × 480 pixel resolution, the touchscreen can be operated with fingers or a stylus. Type: Mitsubishi Melfa RV-3SDB-S15 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Kuka robot with a control unit. Kuka robot VKR 16-2 R1610 Control unit VKRC4-SC5 Kuka smartPAD handheld programming device The robot comes from a school and research department. Hour meter: 226.25 hours Axis data: Range of motion: A1 ±185° A2 -185° / 65° A3 -138° / 175° A4 ±350° A5 ±130° A6 ±350° Speed at nominal load A1 200 °/s A2 175 °/s A3 190 °/s A4 430 °/s A5 430 °/s A6 630 °/s Godszdiudepfx Akyjuc Technical data: Maximum reach 1612 mm Maximum payload 20 kg Nominal payload 16 kg Nominal additional load carousel / swivel / arm 0 kg / 0 kg / 10 kg Positional repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Mounting position: Floor; Ceiling; Wall; Any angle Mounting area 430.5 mm x 370 mm Weight approx. 245 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Fanuc robot with a control unit. Fanuc Robot M-420I A Guedpfszdit Tsx Akyoc The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance at high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Large working envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload within the entire working envelope. Linear motion speeds up to 4200 mm/s. Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 1993, CNC Lathe REALMECA type T400 Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Guodozdit Hjpfx Akyjc Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Technical data: Guodpfx Aezdityekyec Year of manufacture: 2016 Working area and travels: X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: good (used), Here we offer you a Stäubli robot. Stäubli robot with control unit and operating panel. The Stäubli RX130 is a fast and precise medium payload robot (max. 12 kg) with a maximum arm reach of 1360 mm. It is suitable for machine tending, painting, cleanroom, life sciences, and pharmaceutical applications. The RX130 robot is equipped with the CS7 controller and has an articulated arm with 6 degrees of freedom for maximum flexibility. The spherical working envelope of the robot enables optimized use of the robot cell. It can be mounted on the floor or ceiling. The 6-axis RX130 offers high-resolution servos with absolute calibration and a fully enclosed structure, ideal for applications in harsh environments. 3x400V-50/60Hz-5500VA Weight 260kg Type: Stäubli CS7 RX130 Condition: used Scope of delivery: (See picture) Gusdpfezdittsx Akyoc (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed via email or fax.

Condition: good (used), Here, we offer a Stäubli robot RX 60 with a control unit. Gsdpfx Ajzditmokyouc Stäubli robot RX 60 with control unit CS7MB RX60 and Manual Control Operator. Type: Stäubli robot RX60 Control unit: CS7B RX60 Lifting weight (nominal load - kg): 2.5 kg Total weight: 44 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: good (used), Steady rest fixed universal Ø 120 mm Guedozditgjpfx Akyec Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Here, we offer you an ABB industrial robot. Specification: IRB 140 M2000 TPU 2 Panel Weight: 98 kg Max. reach: 810 mm Payload: 6 kg Type: IRB 140 M2000 Gujdpfxjzditaj Akyoc Scope of supply: Robot, control unit, cables (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Bosch SCARA articulated-arm robot, model SR8, with a control unit. Bosch SCARA articulated-arm robot, model SR8 Control unit Gjdpfezdir Nsx Akyouc Type: SCARA SR8 Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, Extraction system complete with KEMPER brand extraction arms. Extraction arms are used in areas where work processes generate harmful dusts and fumes that negatively impact the health of workers and other people in the vicinity. Extraction arms are one of the most effective systems for capturing welding fumes, as well as fumes, dusts, or vapors from other manufacturing processes. The set includes: Guodezdir Depfx Akysc * 4 extraction arms with a wall mount, 160mm in diameter and 2.00m in length * Pipe, diameter 250mm - 8m * Pipe, diameter 350mm - 8.5m * 350mm tee fitting * 250mm elbow - 3 pieces

Condition: used, mileage: 127,268 km, power: 88 kW (119.65 HP), first registration: 07/2018, fuel type: diesel, tire size: 205/65R16C, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2018, Equipment: ABS, central locking, electric window regulation, power mirror, retarder, = Additional options and accessories = - Stability control - Alternating current - Tool box = Additional information = Tire size: 205/65R16C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Rear axle: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Unladen weight: 1,960 kg Payload: 1,070 kg GVWR: 3,030 kg Gujdjzdirxopfx Akysc Damage: none

Condition: excellent (used), Year of construction: 2001, Workbench parallel Lathe WABECO 10200 Between points: 500 mm Maxi Ø on bench: Ø 200 mm Maxi Ø over saddle: Ø 120 mm Spindle diameter: Ø 26 mm Spindle speed: from 10 to 1000 RPM (on electronic dimmer) Square/ tilting turret 3-jaws chuck Ø 100 mm Year of construction: 2001 Tailstock CM2 Longitudinal auto feeds Supplied with the gears (see photo) Supplied without the table Voltage: 220 V mono Dimensions (L x W x H): 1200 x 300 x 450 mm Weight: approx 100 kg Gusdpfx Akjzdirtjyoc