Wohnhas Möbel zum wohnen

Condition: excellent (used), FM 2/8 veneer saw 3100 mm stop, extraction Nodjxpvycjpfx Agzelh

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Type: FM 2-3000 Motor: 2.5 HP Machine No.: 199540 Cutting length: 3000 mm Nsdpfoxf Tqwsx Agzolh Saw blade diameter: 180 mm Rear support table Weight approx. 300 kg.

Condition: used, Year of construction: 2020, functionality: fully functional, empty load weight: 470 kg, load capacity: 4,000 kg, Rotator Njdpfx Aexdpq Rogzelh Load centre: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical condition: very good Description: In addition to this unit, we offer further forklifts and warehouse equipment. Our machines are workshop-inspected and certified according to FEM 4.004. Please contact us by email or telephone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Hire purchase and financing at attractive conditions available on request. We are happy to offer you competent and comprehensive advice on our vehicles.

Condition: excellent (used), functionality: fully functional, cutting length (max.): 3,000 mm, type of input current: three-phase, saw blade diameter: 160 mm, total width: 1,000 mm, total length: 4,600 mm, total height: 1,400 mm, TOMESANI veneer saw with scorer 3.0 m Specification: • Condition – after comprehensive inspection, fully operational Nljdexb Dyzjpfx Agzoh • Manufacturer – TOMESANI • Maximum working length of cut element – 300 cm • Main blade motor (160 mm diameter) – 2.2 HP • Scoring unit motor (100 mm diameter) – 0.17 HP • Pneumatic hold-down for the cut veneer • Integrated dust extraction system with built-in fan • Overall dimensions – 460 x 100 x 140 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos show the actual condition of the item for sale • Possibility to power up and test the device on site

Condition: used, Year of construction: 1980, functionality: fully functional, cutting length (max.): 3,500 mm, type of input current: three-phase, saw blade diameter: 200 mm, total width: 1,200 mm, total length: 4,400 mm, total height: 1,300 mm, overall weight: 600 kg, power: 2.2 kW (2.99 HP), Dietz motor 2.2 kW Pneumatic pressure bar Rear support table provided if required Extraction connection DM 100mm Located in Karlsruhe Rheinstetten Nledpfxsxbbiyj Agzeh Forklift available

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Nledpfow U D U Hsx Agzeh

Condition: used, functionality: fully functional, cutting length (max.): 3,500 mm, cutting height (max.): 40 mm, type of input current: three-phase, saw blade diameter: 180 mm, – very good condition TECHNICAL SPECIFICATIONS: – cutting length: 3500 mm – cutting height: 40 mm Nsdpow I Efgsfx Agzelh – cutting width on the right side: 960 mm – saw motor: 3 kW – milling cutter motor: 1.5 kW – feed motor: 0.75 kW – stepless cutting speed adjustment – blade diameter: 180 mm – cutter diameter: 70 mm – extraction port diameter: 100 mm – upper pressure beam – automatic milling cutter approach – possibility of manual or automatic cutting – overall dimensions (L/W/H): 530 / 205 / 130 cm – weight: ~ 800 kg

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity: 3,500 kg, Rotator ISO Class: ISO Class 3 = 2,500 - 4,999 kg Nledpew E Ukuofx Agzoh Condition: Ready for use and fully functional Technical Condition: good Description: Year 2018, ISO 3A (51 cm), Capacity 3,500 kg, 360° Rotator, Sideshift, Width 950 mm, Forks 1,200 mm, ID OS1709

Condition: used, functionality: fully functional, load capacity: 1,500 kg, Rotator ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Nlodpfxow E Ukns Agzoh Technical condition: Good Description: ISO 2A (41 cm), Capacity 1,500 kg, 360° rotator, Width 580 mm / 890 mm, ID OS1707

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Rotator Nljdpfsw Ermaox Agzsh ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A (51 cm), capacity 3,500 kg, 360° rotator, width 930 mm / 1000 mm, ID OS1679

Condition: used, Year of construction: 2017, functionality: fully functional, load capacity: 1,800 kg, Rotator device Nsdpjw Erlvofx Agzelh ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2017 ISO 2A (41 cm) Capacity 1,800 kg Rotator 360° Width 670 mm / 890 mm ID OS1676

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Rotator ISO Class: ISO Class 3 = 2,500 - 4,999 kg Nlodpfx Agsw Erfcjzsh Condition: Ready for use and fully functional Technical Condition: good Description: ISO 3A (51 cm) Capacity 3500 kg Rotator 360° Width 670 mm ID OS1632

Condition: used, Year of construction: 2017, functionality: fully functional, load capacity: 2,500 kg, Rotating device ISO Class: ISO Class 2 = 1,000 - 2,500 kg Nlodpfxow Erd Se Agzeh Condition: Ready for use and fully operational Technical Condition: good Description: Year 2017 ISO 3A (51 cm) Capacity 2,500 kg Rotator 360° Width 950 mm ID OS1631

Condition: used, machine/vehicle number: 199710, max. Schnittlänge : 3000 mm max. Schnitthöhe : 45 mm Sägeblattdurchmesser : 160 mm Spannbalkenbewegung : per Handrad Bewegung Sägewagen : manuell Nodpjv U Hahofx Agzolh Maschinentyp : fahrbar Motorleistung : 1,8 kW

Condition: good (used), Year of construction: 1990, functionality: fully functional, Scheer joining and fine-cutting machine, built in 1990, machine number 83464, type FM 8- Nedpfxjv Rvpko Agzolh 3100

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. Nlodpfjv D I Uxox Agzoh • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2020, functionality: fully functional, empty load weight: 385 kg, load capacity: 2,000 kg, construction width: 980 mm, Rotating device Load center of gravity: 500 Nodjv Dng Ispfx Agzslh ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good

Condition: used, Year of construction: 1985, with großer cut length 3500 mmused, good conditionmanufactured by Mayertype FSKbuilt in 1985 or 2,2 kWcut length 3500 mmsaw blade diameter ca. 180 mmpneumatic clampingrip fence with hand wheel adjustablefront extented tablerear extented tableveneer strip fence with stop fingerexhaust ductpneumatic service unitexhaust connection D 100 mmrequired space ca. l x w x h mm4400 x 1200 x 1300weight ca. 600 kgtotal connected power ca. 2,2 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Nledovwf Uvopfx Agzeh

Condition: used, second handMade by ScheerType FM 2P-3000Machine no. 81394Motor 1.1 kWCutting length approx. 3000 mmpneumatic tension 1 cylinderrear support tableRequired space approx. 3600 mm x 1100 mm x 1300 mmWeight approx. 350 kgStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Nedpfx Agevwf E Iozelh

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Nledovwf Agopfx Agzjh

Condition: used, used, good conditionmanufactured by Scheertype FM 8-3100Masch.-No. 83077motor 1,85 kWcut length 3100 mmsaw blade diameter ca. 160 mmpneumatic clampingrear extented tableself-exhaustrequired space ca. l x w x h mm4000 x 1000 x 1300weight ca. 450 kglocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Njdpfovwftxex Agzjlh

Condition: used, Year of construction: 1970, used, good conditionmake Scheertype FM2 3000year of manufacture approx. 1970machine no. 102748cutting length 3000 mmsaw blade diameter approx. 180 mmrear support tablespace requirement approx. 3500 x 1000 x 1300 mmweight approx. 400 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Nljdjvwfpgopfx Agzeh

Condition: used, Year of construction: 1978, self-extraction with dust bag, with handwheel feedused, top condition, little runmake Scheertype FM5 - 3100 Kyear of construction . 3721motor 1,8 kWsaw feed / handwheelcutting length 3100 mmpneumatic clampingrear support tablestrip fence with fence fingerrip fenceown suction with dust bagspace requirement approx. 4200 mm x 1200 mm x 1200 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Nlsdpfx Agjvwfh Nszeh

Condition: excellent (used), Year of construction: 1984, used, top condition, hardly used Make Scheer Dqmmnt Type FM5 - 3100 Year of manufacture 1984 Mach. No. 41134 Nljdpovld I Djfx Agzjh Motor 1.8 kW Saw feed / handwheel Cutting length 3100 mm Saw blade diameter: 180 mm Pneumatic tension Rear support table Parallel stop Chassis Space requirement approx. 4200 mm x 1200 mm x 1200 mm Storage location 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: excellent (used), Veneer saw Front support table Pneumatic pressure beam control Rear table consoles with angle stop Suction channel Cutting length 4200 mm Cutting height approx. 50 mm Motor power 3.0 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 5800 x 1350 x 1200 mm Advise used machines: - Technical data without obligation, mistake and intermediate sale reserve. - Price is considered ex-location price - All articles or machines are bought as seen without any entitlement on warranty. - It is left to the choice of the buyer to view the machines before at its location. - Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Nljdpfx Aevbzpkjgzjh Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).