Remax Kunststofftechnik

Condition: used, Extrusion Line, Including: 2ea Mixer, Maker Jiangyin Brightsail Machinery, Model BSR-5000, Year 2020; Barrel volume 5000L, Power 30kW, Work volume 3000L; to include 2 units of Vacuum feeding machine, Maker Jiangyin Brightsail Machinery, Model ZKS-7, Year 2020; Capacity 4000kg/hr, Power 7.75kW; to include Platform; 1ea Small Mixer; 1ea Vibrating Screen, Maker Local, Model 800-IS, Year 2021; Power 0.55kW, Vibration frequency 1440, Amplitude; 1 unit of Feeding System, Maker Coperion K-TRON, Year 2020; to include stainless steel bracket; 1ea Extruder, Maker Coperion, Model ZSK, Year 2020; to include 1ea Water dispenser and 2ea Screw shaft; to include Screw shaft puller; 1ea Cutter, Maker Urschel, Model 3600F; 2ea Unused Temperature Controller, Maker REGLOPLAS; 1ea PSD Vibrating Screen, Maker TYLER, Model RX-30-10, Year 2021; Dsdpfx Aeyhm Ebefnjcc 1ea LN2 Freezer, Maker CES, Model CES-TF-LIN-30FTX50IN-PLC, Year 2020; Weight 6000kg, Power 9kW;

Year of construction: 2025, condition: new, New PPR extrusion machine for PPR pipe starting from 20mm up to 40mm Dcsdsyhh Udopfx Afnoc

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with 26 mm screw diameter This machine incorporates all the features of the ZSK Mc 18 series and is suitable for formulation development, compound sampling, as well as production of smaller compound batches up to approximately 180 kg/h. Compared to the previous ZSK 26 Mc model, the enhanced laboratory extruder enables throughput increases of up to 100%, as the torque has been raised to 15 Nm/cm³. The extruder is mobile and requires only minimal space, as the control cabinet is integrated into the machine base. Both heating and cooling systems are pre-installed and ready for operation (plug & play). Machine No.: 20526471 Year of construction: 2012 Operating hours: approx. 30,000 h Condition: Used, operational Technical specifications: Type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10% / +6%), 50 Hz ±2% Barrel configuration: E-0-0-S-0-0-1-0-V-0 Throughput: approx. 150–200 kg/h, depending on formulation, raw materials, and desired product quality Applications: Highly filled compounds, masterbatch production Capable of processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of supply Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × twin screw powder feeder Side feeding / degassing: - 1 × ZS-B25 side feeder - 1 × ZS-EG25 vacuum side degassing unit Vacuum system: Busch Plastex MI 0120 B 222 CNX6 vacuum pump, specifically designed for PET applications Dcodpfxeyhd Dbo Afnjc Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit - Strand pelletizer SP50 - Water bath not included Peripheral equipment: - Bag emptying station for pellets - Conveying system up to feeders Spare parts: - Spare parts included, 2nd screw set.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Dsdpfxjyhcl Dj Afnecc Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Dodpfxsyhckas Afnjcc Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Dodpoyhcghofx Afnecc Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Dcedpfxeyhcc Ae Afnjc Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Dcjdpfx Afeyhcabensc Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. Dcsdpfx Asyg Eghefnec The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Year of construction: 2025, condition: new, New plastic pipe extruder machine with down stream pipe PE 100 or HDPE starting pipe diameter from 20mm till 65mm Dcodpfxoyguzhs Afnjc

Year of construction: 2002, operating hours: 1,378 h, condition: excellent (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Dodpfx Afsyf Itnjnscc Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Year of construction: 2015, operating hours: 1,378 h, condition: like new (used), Brand: COLLIN Lab & Pilot Solutions GmbH Type: ZK 25 compounding line Serial no.: 5251-38-15 Year of manufacture: 2015 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D ratio: 48 Connected load: 36 kW Dimensions (LxWxH): 5,000 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 2x Gravimetric feeding systems from Coperion – 1x Side feeding with two possible placements Dodeyf Idmjpfx Afnecc – 2x Liquid dosing units – 1x Vent port for degassing, including vacuum pump – Filament die with 1 cavity – Filament die with 4 cavities – FECON system for process data monitoring – Silicone conveyor belt with active air cooling – Pelletizer with adjustable speed Other: All documentation available in German. Other languages upon request.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Dedjyc Sfpepfx Afnscc Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty

Year of construction: 1986, condition: used, functionality: fully functional, We are offering this used AMUT BA145 machine, manufactured in 1986. Manufacturer: AMUT Model: BA145 Dedjyc Ni Sopfx Afnjcc Year of manufacture: 1986 Condition: used Category ID: 452 If you have any additional questions or require more information, please send us a message or call us.

Year of construction: 2004, condition: excellent (used), GRAEWE - SANDERN UNDERWATER VACUUM CALIBRATION TANK V-32-2-3, 3 meters long 2-chamber tank with 2 bypass filters Year of manufacture 2004 Without spraying / Full immersion calibration tank Electric feed, forward and reverse Djdpjyc E Nnsfx Afnecc

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, REIFENHÄUSER REITRUDER RZE 85 41:D Year of manufacture: 2007 Drive/Motor: 265 kW Screw diameter: 85 mm Output approx. 1,000 kg/h Includes gear pump, dosing station, and working platform Last application: The system was used for producing PP pipes up to a diameter of 630 mm. The Reitruder technology operates with co-rotating screws. We have adapted this twin-screw technology for use in direct extrusion lines—primarily for inline compounding. This integration combines several process steps into one. Sustainability Process 100% recycled material In combination with efficient vacuum units, the Reitruder technology enables you to process recycled PET bottle flakes directly—without the need for energy- and time-intensive pre-drying. Cost-effectiveness Reduce raw material costs by 30% Our Reitruder twin-screw technology processes high levels of additives and fillers. Instead of using pre-mixed compounds, fillers such as calcium carbonate or talc are continuously mixed in. Simultaneously, direct extrusion reduces energy costs compared to the conventional two-step compounding process. Without intermediate solidification and remelting of the plastic, the Reitruder processes materials from raw input to finished product in a single run. Direct Extrusion High quality without detours With direct extrusion, you can achieve quality levels for semi-finished and finished products that previously required considerable technical effort. Utilize today’s technology to combine various process stages into one single step. Dsdpfoyczlfex Afnscc Reitruder RZE 85 EXTRUSION Among other innovations, the co-rotating twin-screw extruder Reitruder RZE 58 was the highlight of Reifenhäuser’s presentation at the NPE trade fair. A differentiated concept with new design elements was introduced. The screw geometry has been adapted to meet changing requirements by incorporating deeper channel depths and a redesigned feed section. These modifications improve feeding when processing PET flakes or regrind and increase the capacity for adding fillers. This results in significant advantages when processing lower-quality raw materials. Furthermore, increased degassing efficiency enables processing of material with moisture levels up to 0.5%. As a result, pre-drying requirements are minimized. Applications • Compounds • Recycled polymers • Thermoforming films • Cast films • Blown films • Foam films and boards • Packaging tape Price: €35,000.00 LOCATION: SACHAL EXTRUSIONSMASCHINEN D-26345 Bockhorn-Grabstede Phone = WhatsApp

Year of construction: 1993, condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones Dodjycuuyepfx Afnscc • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Year of construction: 1987, condition: good (used), Brand: Collin Pilot & Lab Solutions Model: P300 Presse Year of construction: 1987 Plate dimensions: 296 x 296 mm Machine no.: 6300 22 86 Connected load: 18 kW Dimensions (LxWxH): 1,150 x 530 x 1,750 mm Dcjdoycggbepfx Afnoc Weight: 650 kg

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : Djdpfjya Eldox Afnocc • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: good (used), Year of construction: 1995, operating hours: 60,269 h, Brand: Cincinnati Milacron Model: CMS 60-25 BL Serial No.: 2008877/10 Screw Type: Single screw Year of manufacture: 1995 Operating hours: 60,269 hours Screw diameter: 60 mm Dcjdjyaa S Sepfx Afnjc L/D ratio: 25 L/D Motor power: 28 kW

Year of construction: 2020, condition: excellent (used), SANDERN VAKUUM-KALIBRIERTANK V-63S-2-6 Meter Djdpfxjx U D Rvj Afnecc

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: Dsdpfx Asx U A Iaefnjcc The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. Dcedpfx Afex Uqyqonoc The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Up to 85% dry matter content. The machine is practically brand new, only tested for a few hours. Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Possibility to test with your own materials.

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Djdpfx Afox Tvcbjnocc In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: - 4-component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder Dodpfox S Rimox Afnecc - Complete control system for dosing and extruder - Single-circuit oil tempering - Maag melt pump