Richard Mitteregger sen.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Mitre saw with stand + extraction unit, year of manufacture approx. 2005 Hfedpfx Adsxwc Icj Dsp

Condition: good (used), Code: 0239 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard Hjdpjxv Su Ajfx Ad Dofp Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Pair of vertical cylinders for cutting optimisation management Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with saw table sliding and repeted cut mm 200 x 760 Maximum ripping height mm 300 Cutting precision : +/- 2 mm on 10 mt beam (straight beam ) - +/-0,2° on rotation edge of the table - +/-0,2° on inclination angle of the blade Control by industry-standard PC Touch- Screen - Windows Operating System - USB ports - Ethernet Rollers: : n° 3 idle rollers benches mt. 2 with rollers diameter 133 mm Widia blade diameter 800 mm Compressed air 6/7 bar Machine weight kg 2900 Total weight kg 3250 (Machine + roller benches)

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung Hfsdpjxvh E Refx Ad Djp der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Frame Guillotine Valiani V110 Double mitre cuts at 45° Straight mitre cuts up to 90° Max. working width: 100 mm Mechanical feed of cutting unit Hfjdpfexu Uh Aox Ad Djp CE certificate

Condition: used, Year of construction: 1999, This Stegmaier Maschinenbau KG - MITRE SAW is being auctioned online in our industrial/machinery insolvency auction for Wietec Fenster GmbH – machinery, workshop equipment, trailers. Hfjdsxu Ttkepfx Ad Dop

Condition: used, Cutting height at 90°: 135 mm Cutting length: mm Mitre range horizontal: - Mitre range vertical: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg Hfedpfxoxu Dhro Ad Dsp

Condition: used, Year of construction: 1996, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Hold-down device: yes Machine length: Machine width: Weight: 300 kg Hfodpfx Ajxu Dhxed Djp

Condition: used, Year of construction: 1999, Under-table crosscut saw Quick Stop 160S - Year of manufacture: 1999 - Pneumatic-hydraulic, NC and CNC controlled - With waste optimization - Dimensions: depth 800 mm, width 3000 mm; usable length 1800 mm - 7.5 kW motor Hsdpjxuk Npofx Ad Defp - Control cabinet: 400 x 1200 x 600 mm - Weight: 90 kg - Connected load: 12 kW, 25A - Operating pressure: 6 bar, extraction with 2 ports 120 mm Ø Machine will remain in operation until week 48.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Motor power - 9 kW Two bump stops - One automatically lifted Powered infeed table Cutting width - approx. 70 cm Hodpfx Asxugh Ijd Djfp Cutting height - 14 cm Infeed table length - 3 m Outfeed table length - 3 m Year of manufacture: 1998 380 V 1310 kg CE marking

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw max. cutting width: 800 mm max. cutting height: approx. 150 mm Hsdpfx Adsxtwk Do Djfp saw blade: 550 mm with 2 roller conveyors, the right one with stop and measuring scale

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Working direction: from right to left. Automatic loading unit. Minimum workpiece length 600 mm (shorter workpieces can be placed directly on the machine infeed table). Model “Speed” (faster material loading, see PDF). Usable length 6000 mm. Cutting accuracy +/- 1.5 mm. Cutting range, see diagram (PDF). Motor 5.5 kW, saw blade ø 500, 3600 rpm. Electronic control CONTROL 6.0 / Windows. Full optimization with error correction. Waste disposal package. Outfeed table with integrated cross pushers 3500 x 1500 mm. PALETTI data connection for use with cutting lists issued in the office. Automatic labeling (PALETTI print manager). LAYOUT. See all technical features attached PDF. Hodpfsxtmwmox Ad Dsfp

Condition: excellent (used), Catalogue number 7800 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 80 mm - Max. workpiece diameter with 400 mm blade: 130 mm - Motor: 9.2 kW - Feed motor: 4×0.3/0.45 kW - 2 feed speed options - Material clamps: 6 pcs (including one pneumatically adjustable) - Dimensions (L/W/H): 4650x1120x1280 mm - Weight: approx. 1000 kg ADVANTAGES – for palisade production – easy to operate – used saw, in very good condition Hfedpfxexr Dd Ie Ad Dsp Net price: 16,900 PLN Net price: 4,020 EUR based on exchange rate 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 1999, functionality: fully functional, Cutting height / blade projection: 115 mm Main / scoring blade diameter: 400 / 160 mm Main / scoring blade speed: 3900 / 6300 rpm Main motor power: typically 15 kW (depending on configuration, 9/11/15/18 kW available) Scoring motor power: approx. 1.8 kW Number of grippers: 7 Front air-cushion tables; scoring unit included as standard Hfedpoxq Hhtjfx Ad Dop Machine dimensions (approx.): 5000 × 7500 × 1800 mm Machine weight (approx.): 8000 kg Our machine variant is equipped with a loading platform.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 035-110235, saw blade diameter: 650 mm, cutting height (max.): 245 mm, rotational speed (max.): 2,800 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 650 mm Maximum cutting height: 245 mm Speed: 2,800 rpm Bore diameter: 30 mm Riving knife thickness: 5.4 mm Kerf width: 13 mm Saw blade height at 90 degrees: 245 mm Saw blade height at 45 degrees: 164 mm Saw blade height at 30 degrees: 113 mm Type of input power: Three-phase MACHINE DETAILS Motor power: 10 kW Motor speed: 3,000 rpm Electric saw blade tilt: 90° - 30°, with digital display Rotary table range: 30° - 150° Electrical Data Phases: 3 + N + PE Hfsdpfxsxpvtij Ad Djp Voltage: 400 V Frequency: 50 Hz Current consumption: 17 A EQUIPMENT Automatic guarding hood Pneumatic cross feed Laser for length cutting

Condition: good (used), Year of construction: 1991, max. cutting length 510 mm saw blade diameter 450 mm Hsdoxpi Ugepfx Ad Djfp 4 kW motor roller tables with stop on both sides, each 2 m long

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: Hfodexn Rt Uspfx Ad Dsp 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Hfsdoxnlgcjpfx Ad Dep Storage location: Garbsen

Condition: used, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Hfodsxmk Ddepfx Ad Dep Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Hedpfoxiza Usx Ad Dofp

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm Hfsdpsxfr Etefx Ad Djp electronic adjustment of saw height automatic material feed touch control panel laser rotating work table 0° – 345° maximum blade diameter: 800 mm motor power: 16.6 kW year of manufacture: 2016 CE marked 400 V

Condition: used, Year of construction: 1999, Cutting height at 90°: 135 mm Cutting length: mm Saw blade swivel and tilt: yes Vertical miter range: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Hfodpfxoxc Hklo Ad Dep Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: used, Year of construction: 1997, cutting height at 90°: 170 mm cutting length: 410 mm miter vertikal: -60° bis +60° sawblade diameter: 420 mm speed: 2800U/min motor power: 2,2 kW motor brake: yes suction connection: 100mm machine length: 1,20 m machine width: 0,7 m Maschinenhöhe: 1,50 m Hodpoxc Hkfefx Ad Dsfp waight: 110kg

Condition: excellent (used), IM Very good condition. Hjdpfxsxcll Ue Ad Defp

Condition: excellent (used), Year of construction: 2021, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Stromag CT 600 F, saw blade diameter: 600 mm, cutting height (max.): 410 mm, feed length X-axis: 7,000 mm, feed rate X-axis: 90 m/min, cutting width (max.): 250 mm, total length: 12,000 mm, overall weight: 2,700 kg, type of input current: three-phase, workpiece weight (max.): 80 kg, cutting length (max.): 6,600 mm, air demand: 350 m³/h, input voltage: 400 V, extraction connection diameter: 110 mm, spindle motor power: 7,500 W, main saw diameter: 600 mm, saw blade speed: 2,560 rpm, operating pressure: 6 bar, Keveset Használt.Maró állomás is van benne. Hodpsxcihgefx Ad Djfp

Condition: like new (used), Year of construction: 2020, functionality: fully functional, saw blade diameter: 550 mm, cutting height (max.): 210 mm, overall weight: 220 kg, Radial arm saw Harwi 625 - H - 2K Hedpsxcat Tofx Ad Djfp Cutting height: 210 mm Radial cutting length: 1250 mm Motor power: 5 kW (heavy-duty brake) Saw blade: 550 mm Extraction connection: 1x 120 mm + 1x 80 mm The machine has not been extensively used and is in technically and visually excellent condition. The machine can be demonstrated. The machine will remain in use for a project until November. Both tables (front and rear) are also for sale. The tables are fitted with ball rollers and are mobile.