Holzbau Hirschbühl

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Gbedpfx Abezlbrie Dep Machine will be completely overhauled Equipment and technical data: Table size: 1100 x 880 mm Drive motor with pole change: 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Manual height adjustment: via handwheel Manual swivel adjustment: via handwheel Height adjustment of the milling spindle: 110 mm Tilt adjustment of the milling spindle: -5° to 45°

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Features and technical data: - with tilting spindle: 0° - 45° - with aluminium sliding table - Table size: 1100 x 620 mm - Working height: 880 mm - Sliding table dimensions: 900 x 200 mm - Sliding table travel: 900 mm - Spindle diameter: 30 mm - Spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller power feeder - Dimensions: 1200 x 1000 x 1400 mm Gbsdpfxozk N Tfs Ab Dop - Weight: approx. 490 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Equipment and technical data: - Operating display in the upper control panel - Control panel can be swiveled and extended - Swiveling milling spindle - Swiveling range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change system for milling arbors - Milling arbor 30 mm Gsdpfx Aszk N Sbjb Dobp - Electromechanical spindle locking - Table support 1340 mm on the machine table, extendable by approx. 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz - Machine socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / stepless speed control - Milling fence type 203 with bilateral handwheel adjustment - Milling guard and pressure device Centrex type 1624 - Reference dimension setting device ZEROMASTER - Feed device Wegoma Variomatic 4N: 4-roller feed device Variable feed speed 2 – 18 m/min Right and left rotation Horizontal and vertical use possible Memo-Lock system for easy pivoting and repositioning Numerical height display Height adjustment from the operator side Large, dimensioned locking levers Maximum overhang 1,050 mm due to extended tube - Dimensions: 260 x 180 x 130 cm - Weight: approx. 1100 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 2007 Equipment and technical data: - Motor 4.7/5.7 kW, with pole-changing capability - With right/left rotation - Milling arbor MK 5 / 30 mm - Height adjustment via handwheel - Speeds 3000/4500/6000/9000 rpm - Milling stop with metal jaws, mounted on a round indexing plate and thus rotatable by 360° - With table extension on both sides with extendable frame support - With mounted roller table on the left side Attention! The table extension was mounted later! To use the roller table, it must be removed! - With 4-roller feed unit, year of manufacture 2007 - Dimensions: 240x65x120 Godpfx Abozk N R Ro Djbp - Weight approx. 900 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Heavy cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900-4400-6000-7800-10000 rpm - Height and tilt adjustment: electric motor drive - Fine adjustment: via handwheel Gbedpjzk N R Djfx Ab Dsp - Equipped with Panhans metal fence jaws - With Holz-Her 3-roller power feed unit Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 2000, Used machine Godpfx Abezk N Rde Djbp Year of manufacture: 2000 The T 110 is the table saw from SCM, which optimally combines quality and an affordable purchase price. The construction is extremely stable. For convenient operation, all controls are arranged within easy reach on the front of the machine. Precise height adjustment of the tool is ensured by a mechanical display. Spindle inclination from -5 to +45 degrees. Table size: 1000 x 750 mm Spindle overhang: 140 mm Table overhang of the spindle: 20 mm Spindle speeds: 3000-4500-6000-9000-10000 rpm Max. diameter of the tool that can be lowered below the table: 320 x 40 mm Profiling tool max. 250 mm Motor: 4 kW Dust extraction port: 120 mm With a 3-roller feed system Weight: 520 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Features and technical data: Table size: 2000 x 880 mm (table made entirely of cast iron) with extendable frame support Gjdezk N N Hjpfx Ab Debp Main motor: pole-changeable 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Spindle height adjustment: 110 mm Spindle tilting: 45° with Holz Her 3-roller power feed Availability: short term Location: 63934 Röllbach

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Gjdpfezk Nzisx Ab Dobp Condition: fully overhauled Features and technical data: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-switchable - With forward/reverse operation - Milling spindle: MK 5 / 30 mm - Height and tilt adjustment via handwheel - Spindle speeds: 3000/4500/6000/9000 rpm - Spindle tilt range: -5 to +45° - Milling fence with metal jaws - Mounted on round insert plate, therefore rotatable 360° - With table extension on both sides with retractable frame supports - Equipped with 4-roller power feed unit Weight: approx. 900 kg Images show the machine in unrefurbished condition Availability: approx. 4 weeks after order placement Location: Flörsheim

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - Milling unit, spindle height adjustable with handwheel, 0 - 125 mm - Milling spindle swivel up to 45° via handwheel Gedpfxszk Nx Uo Ab Dsbp - Degree indicator for swivel with digital display - Dovetail and T-slot table Z - Anodized table, length 1000 mm - Milling stop 240 - Milling stop rails 450, anodized aluminum - with 3-roller feed mechanism Availability: short notice Location: 63934 Flörsheim

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Automatic spindle height and tilt adjustment with decimal increments - Mechanical display for spindle height and electronic display for spindle tilt - Tilting hood with aluminum guides - Adjustable table opening via table slides - System for quick tool change - With long tables featuring extendable workpiece support - Table size: 2500 x 780 mm - Spindle adjustment: -45° to +45° - Spindle diameter: 30 mm - Spindle stroke: 230 mm - Maximum table opening: 300 mm - Motor: 5.5 kW with automatic star-delta start - With forward/reverse rotation - Speeds: 3000/4500/6000/8000/10000 rpm - Electronic programming of spindle height, spindle tilt, and fence position (milling fence) - Extraction ports above and below 120 mm Dimensions: 2570 x 1450 mm Weight: approx. 670 kg Gbjdozk Nq Ropfx Ab Dep Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm Gedjzk Nn Ajpfx Ab Djbp - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm - Main drive motor power: 5.0 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Condition: excellent (used), spindle diameter 35mm manual spindle lifting and lowering Godpfxjzipbgo Ab Dsbp spindle rotation speed adjustable to 2900/4750/7750/12300 RPM star-delta starter

Condition: good (used), Year of construction: 1988, Panhans swivel spindle milling machine Type: 259 Spindle diameter: 30 mm Spindle can rotate both clockwise and counterclockwise Gbsdpfx Ajzcc S Teb Dep Spindle can be swiveled up to 45 degrees 3-roller feed mechanism

Condition: used, Year of construction: 2000, Used machine Gedpfozb Sadex Ab Dobp Year of manufacture: 2000 Equipment and technical data: - Milling unit, spindle height adjustable with handwheel, 0 - 125 mm - Milling spindle swivel up to 45° via handwheel - Degree indicator for swivel with digital display - Dovetail and T-slot table Z - Anodized table, length 1000 mm - Milling stop 240 - Milling stop rails 450, anodized aluminum - with 3-roller feed mechanism Availability: short notice Location: 63934 Flörsheim

Condition: excellent (used), Year of construction: 2023, For sale is a used Hammer milling machine F3 with 4 milling speeds. The machine has been inspected and refurbished by our qualified personnel and is in very good condition. Technical data: - 4 milling speeds - height-adjustable + swiveling - Multi-adjustment system - incl. traversing mechanism - Motor power 4 kW / 5.4 hp - Year of manufacture 2023 Gbedsza Dx Aspfx Ab Dep The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-L0OE6

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Features and technical data: Gbsdpfx Absy Si Arj Djp - with tilting spindle: 0° - 45° - with aluminium sliding table - Table size: 1100 x 620 mm - Working height: 880 mm - Sliding table dimensions: 900 x 200 mm - Sliding table travel: 900 mm - Spindle diameter: 30 mm - Spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller power feeder - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Equipment and technical data: - Operator display in the upper control panel - Control panel swivels and extends - Swiveling milling spindle - Swiveling range of the milling spindle: +/- 45° Gbsdpoy R Harefx Ab Dep - Milling spindle stroke: 150 mm - HSK80 quick-change system for milling arbors - Milling arbor 30 mm - Electromechanical spindle locking - Table extension 1340 mm on the machine table, extending approximately 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz - Machine socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / stepless speed control - Milling stop type 203 with manual adjustment on both sides - Milling guard and pressure device Centrex type 1624 - Reference dimension setting device ZEROMASTER - Feed unit Wegoma Variomatic 4N: 4-roller feed unit Variable feed speed 2 - 18 m/min Right and left rotation Horizontal and vertical use possible Memo-Lock system for easy swiveling and repositioning Numerical height display Height adjustment from the operator side Large-sized locking levers Maximum overhang 1,050 mm due to extended tube - Dimensions: 260x180x130 cm - Weight: approx. 1100 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1984, Used machine Gbodpfx Ajy R Halsb Djp Year of manufacture: 2007 Equipment and technical data: - Motor 4.7/5.7 kW, with pole-changing capability - With right/left rotation - Milling arbor MK 5 / 30 mm - Height adjustment via handwheel - Speeds 3000/4500/6000/9000 rpm - Milling stop with metal jaws, mounted on a round indexing plate and thus rotatable by 360° - With table extension on both sides with extendable frame support - With mounted roller table on the left side Attention! The table extension was mounted later! To use the roller table, it must be removed! - With 4-roller feed unit, year of manufacture 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Heavy cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900-4400-6000-7800-10000 rpm Gsdpey R Hafjfx Ab Djbp - Height and tilt adjustment: electric motor drive - Fine adjustment: via handwheel - Equipped with Panhans metal fence jaws - With Holz-Her 3-roller power feed unit Availability: short-term Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Gjdey Rh Nzspfx Ab Dobp Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 The T 110 is the table saw from SCM, which optimally combines quality and an affordable purchase price. The construction is extremely stable. For convenient operation, all controls are arranged within easy reach on the front of the machine. Precise height adjustment of the tool is ensured by a mechanical display. Spindle inclination from -5 to +45 degrees. Table size: 1000 x 750 mm Spindle overhang: 140 mm Table overhang of the spindle: 20 mm Spindle speeds: 3000-4500-6000-9000-10000 rpm Max. diameter of the tool that can be lowered below the table: 320 x 40 mm Profiling tool max. 250 mm Motor: 4 kW Dust extraction port: 120 mm With a 3-roller feed system Gjdpfx Abjy Ih Tus Dsbp Weight: 520 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Features and technical data: Table size: 2000 x 880 mm (table made entirely of cast iron) with extendable frame support Main motor: pole-changeable 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Spindle height adjustment: 110 mm Gbjdjy Ih Thspfx Ab Dep Spindle tilting: 45° with Holz Her 3-roller power feed Availability: short term Location: 63934 Röllbach

Condition: new, Year of construction: 2024, functionality: fully functional, power: 3 kW (4.08 HP), pivoting range: 90 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, new, unpacked table router with spindle tilting, diameter 30 mm. Sliding carriage at the front side. Speeds: 3000, 6000, 8000, 10000 rpm Gbsdpfsy El T Tsx Ab Dsp

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm Gbsdpfx Aoy Ehcdob Dop - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, We offer a Möhringer root reducer in front of the gate TYPE 312 004 Gbsdpfxjy Ecxto Ab Dep Hydraulic lifting and lowering of the frez Motor 55 kW/63 kW