Dolp Prüftechnik

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Lhedpoycvd Njfx Afzjb Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Lodpeycvdisfx Afzehb Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone.

Condition: excellent (used), Memmert Type: UFP 500 Memmert UFP 500 Forced Air Drying Oven / Heating Cabinet / Laboratory Oven up to 300 °C Description: For sale is a professional Memmert UFP 500 forced air heating cabinet / drying oven manufactured in Germany. This device is ideally suited for use in laboratories, industry, workshops, or research facilities for drying, heating, tempering, and conditioning a wide variety of materials. Thanks to forced air circulation, a highly uniform temperature distribution is achieved inside the chamber. Features: - Temperature range up to 300 °C - Digital control with display - Forced air operation (fan) - Stainless steel interior - Multiple shelf positions - Timer and program functions - Over-temperature protection - RS232 interface - Robust industrial/laboratory quality - Made in Germany Technical Data: Model: Memmert UFP 500 Power supply: 230 V / 50–60 Hz Power consumption: approx. 2000 W Current: approx. 8.7 A Max. temperature: 300 °C Dimensions & Weight External dimensions (W × H × D): approx. 70 × 80 × 70 cm Internal volume: approx. 108 liters Weight: approx. 80–90 kg Condition: used Scope of delivery: (see pictures) (Changes and errors in the technical data are reserved!) Lhsdpfeyb A Npox Afzjb Should you have any further questions, we are happy to answer them by phone.

Condition: used, Spectro SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx for professional metal and alloy analysis. The device is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, as well as various non-ferrous alloys. It is a proven industrial instrument widely used in foundries, laboratories, and quality assurance departments. Technical Data: Lhsdpfxsybcfko Afzob Device Information: Device type: Optical Emission Spectrometer (OES) Manufacturer: SPECTRO / AMETEK Model: SPECTRO MAXx Design: Benchtop device Electrical Specifications: Power supply: 115 / 230 V AC Frequency: 50 / 60 Hz Power consumption during measurement: approx. 400 VA Power consumption in standby: approx. 180 VA Fusing: 16 A (slow-blow) Gas Supply: Operating gas: Argon (Ar) Argon purity: min. 4.8 (99.998%) Input pressure: approx. 7 bar Argon consumption: Stand-by: approx. 6 l/h Constant operation: approx. 23 l/h Analysis mode: approx. 200 l/h Ambient Conditions: Operating temperature: +10 °C to +30 °C Humidity: 20–80%, non-condensing Dimensions & Weight: Dimensions (W × D × H): approx. 600 × 740 × 460 mm Weight: approx. 60 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photos) - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals & software media (Errors and changes in the technical data, as well as prior sale, reserved!) If you have further questions, we are happy to answer them by phone.

Year of construction: 2017, condition: ready for operation (used), A portable surface roughness measuring device Mitutoyo including a granite plate is available. Measurement range X: 17.5mm, measurement range Z: -200µm-160µm, Z resolution: 0.002µm, measuring speed: 0.5mm/s, return speed: 1mm/s, granite measuring table dimensions X/Y/Z: 400mm/250mm/70mm. Documentation available. An on-site inspection is possible. Lhjdpfxjya Hx Sj Afzsb

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Lhjdpfjya Ev Nsx Afzsb Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Memmert Model: UFP 800 Standard Equipment • Electronic fuzzy-assisted PID process controller with continuous power adjustment and time-saving self-diagnosis system for quick fault detection (see section "Error Messages") • Language selection • Alphanumeric text display • Internal protocol memory with 1024kB for storing actual temperature, set temperature, air turbine, air damper, and error statuses with timestamp • Device control and actual value logging via MEMoryCard XL • Program control for up to 40 ramp segments • Adjustable air turbine for forced-air ovens (10% increments) • Servo-motor adjustable air damper (10% increments) for recirculated or fresh air operation • Integrated weekly timer with group function (e.g. weekdays) • Retractable push/turn knob for easy operation • Visual alarm indication • Built-in buzzer as alarm for limit violations, audible signal at program end, and for input acknowledgment (key click) • Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-following monitoring (ASF) • Mechanical temperature limiter (TB safety class 1) • Monitoring relay to switch off heating in case of failure • Two separate PT100 temperature sensors DIN class A in 4-wire design for control and monitoring • Convenient integrated 3-point temperature adjustment • Temperature-dependent chamber and door ventilation • Parallel printer interface (PCL3 compatible) • Serial RS-232C interface for computer-assisted temperature programming and reading the internal protocol memory Technical Data: Chamber: Stainless steel, highly stable and easy to clean due to deep-drawn ribbing Housing (outer body): Structured stainless steel, rear panel made from galvanized steel sheet UFP 800 is mobile and lockable on wheels External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm Volume: approx. 749 liters Weight: approx. 170 kg Power supply: 3N~ 400 V 50/60 Hz Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Lsdeyazb Uspfx Afzehb For further questions, we are happy to assist you by phone.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: B115.0548, Technical characteristics: Core Specifications - Temperature range: +20 °C to +300 °C - Temperature control: PID microprocessor with single display (TFT color screen) - Sensor: 1 × Pt100 DIN Class A, 4-wire circuit - Setting accuracy: • Up to 99.9 °C: 0.1 °C • From 100 °C: 0.5 °C - Volume: 32 litres - Internal dimensions (W × H × D): 400 × 320 × 250 mm - External dimensions (W × H × D): 585 × 704 × 434 mm - Max. load capacity: 60 kg (20 kg per shelf) - Number of shelves: 1 stainless steel grid (max. 3 possible) Ventilation & Heating - Circulation type: Natural convection - Heating system: Four-sided large-area heating - Fresh air control: Electronically adjustable air flap - Vent connection: With restrictor flap Electrical & Environmental - Power supply: • 230 V, 50/60 Hz, approx. 1600 W • 115 V version also available - Ambient temperature range: +5 °C to +40 °C - Humidity tolerance: Max. 80% RH, non-condensing - Altitude limit: Up to 2,000 m above sea level Control & Safety - Timer: 1 minute to 99 days - Set point WAIT function: Timer starts only after set temperature is reached - Overtemperature protection: • Electronic monitor • Mechanical safety limiter (TB), DIN 12880 Class 1 - Calibration: 3 user-selectable temperature values - Documentation: Atmo CONTROL software via USB or Ethernet - Interface languages: English, German, Spanish, French Construction & Materials - Interior: Stainless steel, electropolished - Exterior: Textured stainless steel (rear panel: zinc-plated steel) - Door: Fully insulated with 2-point compression lock - Net weight: ~45 kg This oven is ideal for drying, heating, ageing, and hardening processes in research, quality control, and industrial laboratories. Machine status: WORKING Lodpfxjyana Dj Afzshb

Condition: excellent (used), Netzsch Model: Netzsch TG 209 F3 Tarsus NETZSCH Proteus® Software for Thermal Analysis included. Description: For sale is a NETZSCH TG 209 F3 Tarsus thermogravimetric analyzer (TGA) manufactured in Germany. This device is used in laboratories, research, development, and quality control for thermogravimetric analysis. Thermogravimetry measures the change in mass of a sample as a function of temperature and time. This method serves, among other purposes, for assessing thermal stability, decomposition processes, moisture and solvent content, as well as filler and ash fractions. The TG 209 F3 Tarsus is a robust, high-precision instrument designed for industrial and research applications—not a hobby or DIY device. Typical fields of application: - Plastics and polymer analysis - Chemical & pharmaceutical industry - Materials research - Quality control - Research & development Software / Data Analysis: The scope of delivery includes NETZSCH Proteus® software for thermal analysis. The Proteus® software is used for device control, data acquisition, and evaluation of thermogravimetric measurements (TGA). Key features include: - Control of measurement programs (temperature profiles, heating rates, dwell times) - Recording of mass changes as a function of temperature and time - Graphical representation of measurement curves (TG, DTG) - Evaluation of decomposition stages, mass losses, and residual masses - Data export for documentation and further processing The software package includes (see photos): - Original NETZSCH Proteus® installation media - Printed software and device documentation - NETZSCH USB dongle (hardware license key) System requirements (according to documentation): - Microsoft Windows 7 / 8.1 / 10 (Professional or Enterprise) Technical specifications (approximate values): Manufacturer: NETZSCH (Made in Germany) Model: TG 209 F3 Tarsus Measurement principle: Thermogravimetric Analysis (TGA) Temperature range: Ambient to approx. 1000 °C Heating rate: approx. 0.1 – 50 K/min Max. sample weight: approx. 1 g Balance resolution: up to approx. 0.1 μg Lsdpfx Ajyamzaefzehb Gas operation: Air / Inert gas (e.g., nitrogen) Mains voltage: 230 V AC / 50–60 Hz (switchable to 115 V) Power consumption: approx. 1.0 – 1.2 kW Dimensions (W×D×H): approx. 45 × 55 × 35 cm Weight: approx. 40 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: like new (used), Year of construction: 2025, Binder FD 720 Dryer from 2025, like new PRODUCT DESCRIPTION The BINDER FD Avantgarde.Line series dryer is designed for situations where especially fast drying and sterilization are required. Thanks to uniform temperature distribution, rapid dynamics, and an efficient fan, this dryer helps save valuable time. MAIN FEATURES Temperature Range: Lhjdpeyahp Sjfx Afzsb - Ambient temperature plus 12°C up to 300°C - Up to 30% lower energy consumption than leading market devices - High temperature accuracy with APT.line™ technology - Forced air convection - Controller with LCD display - Electromechanical exhaust air flap control - 2 chrome-plated wire shelves - Integrated, independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm - Ergonomic handle design - USB port for data recording

Condition: like new (used), functionality: fully functional, Binder MK 56, like new, from 2026 PRODUCT DESCRIPTION The BINDER MK series chamber is designed for all heat and cold testing within a temperature range from -40°C to +180°C. For cyclic temperature tests, the MK chamber provides a cost-effective alternative to expensive custom solutions. MAIN FEATURES Temperature range: -40 °C to +180 °C APT.line™ preheating chamber technology Programmable anti-condensation protection for samples Viewing window with interior lighting BINDER Multi Management Software APT-COM™ Basic Edition Diagnostic system with optical and acoustic alarm Intuitive touchscreen controller with segment programming and real-time operation Lhodsyahpfjpfx Afzeb Internal data logger, measurement values in open format readable via USB Device self-test for comprehensive status analysis Access port with 50 mm silicone plug, left side Independent, adjustable Class 2 (DIN 12880) temperature safety device with optical alarm 4 casters, two with brakes Interface for computer connection: Ethernet Ramp function capability Integrated line recorder Real-time clock 1 stainless steel wire shelf Stainless steel interior Halogen-free refrigerant R-452A Cooling provided by a compressor unit

Condition: like new (used), Year of construction: 2025, Binder M 720 Laboratory Dryer, Like New, Year 2025 PRODUCT DESCRIPTION The M series material testing chambers, featuring a maximum temperature of +300°C and multiple programming options, are perfectly suited for materials testing and ageing studies. Thanks to high airflow, high-performance fans provide rapid heating. KEY FEATURES Temperature range: +14°C above ambient temperature up to +300°C High temperature accuracy thanks to APT.line™ technology with increased heating capacity Lsdpfx Ajyahnusfzjhb Reinforced fan with adjustable speed Electromechanical exhaust air flap control Intuitive controller with touchscreen and programmable time-segment and real-time functions 2 chrome-plated racks Independent, adjustable class 2 (DIN 12880) temperature safety device and optional independent class 3.1 (DIN 12880) temperature safety device with visual/acoustic alarm selectable on the controller Failsafe function – backup Pt 100 sensor PC interface: Ethernet Internal data logger; measured values can be read in an open format via USB

Condition: like new (used), Year of construction: 2025, Binder KBWF 720 Chamber, ex-demo 2025, like new. Temperature range: 0 °C to 70 °C Temperature range with lighting: 10 °C to 60 °C Humidity range: 10% to 80% relative humidity Adjustable light cassette modules The fitotron chambers of the KBWF series, thanks to natural lighting, provide uniform and stable lighting, humidity, and temperature conditions. These units are ideal for plant and organism cultivation, as even light distribution and humidity control stimulate growth, similar to stable temperatures found in climate chambers. Temperature can be displayed in the range from 0 °C to 70 °C, with a resolution of one tenth of a degree, and humidity with an accuracy of one tenth of a percent. The device is equipped with a microprocessor that efficiently manages the humidification and dehumidification system. Humidity control utilizes a capacitive humidity sensor and steam humidification. Ledpfx Aoyahm Rofzjhb Advanced programming allows precise operation of climate conditions, including long-term settings. As standard, the KBEF series chamber is equipped with adjustable light cassette modules, each containing 5 daylight fluorescent tubes. Special fluorescent tubes for plant cultivation are also available, featuring an optimized spectrum for photosynthesis—ideal for simulating perfect climate conditions in plant biotechnology, forestry, silviculture, or agriculture. Climate chambers with lighting and humidity control are also suitable for the pharmaceutical and chemical industries, quality assurance research, and material testing. Units are fitted with a controller supporting time segment programming and a color LCD monitor for high user comfort. Key features: - APT.line™ preheating chamber technology - Adjustable fan speed - Humidity control with capacitive humidity sensor and steam humidification - Intuitive touchscreen controller with segment and real-time programming - Internal data logger; measured values can be read in open format via USB - Device self-test for comprehensive status analysis - Airtight internal doors made of safety glass - Corrosion prevention of glass with special TIMELESS coating - Data display on color LCD monitor - Stainless steel wire shelves - 30 mm access port with silicone plug, left side - Class 3.1 temperature sensor with visual and acoustic temperature alarm - Computer interface: Ethernet - Door heating

Condition: like new (used), functionality: fully functional, Binder VD 115 Vacuum Dryer ex-demo, like new. PRODUCT DESCRIPTION The BINDER VD series vacuum dryer ensures gentle drying and impresses with precise temperature control. BINDER’s patented expansion shelves ensure optimal heat transfer. The shelves can be positioned freely, and the interior is easy to clean. KEY FEATURES Temperature range: Ambient temperature from +9°C to +220°C Controller with digital display for pressure and temperature Program-controlled drying monitoring with automatic ventilation at the end of the process Internal data recorder, measurement values available in an open format, readable via USB Lsdpfx Afjyahl Hjzohb 1 aluminum expansion shelf, individually positionable Inert gas connection DN 16 port – for introducing external measuring instruments Safety glass window, spring-mounted, with splash protection Large viewing window, optionally with interior lighting Computer interface: Ethernet

Condition: excellent (used), Netzsch Type: DSC 200 F3 Maia® Measuring Device NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter incl. accessories Description / Scope of Functions A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes when it is heated or cooled in a controlled manner. The device enables the investigation of the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpy - Heat capacity - Purity determination of substances Typical fields of application: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without the need for liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® measuring device - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (user manuals, instrument manuals, software manuals) - NETZSCH Proteus® software incl. data carrier and USB dongle Technical data (excerpt) DSC 200 F3 Maia® Power supply: 230 V / 50 Hz Power consumption: approx. 500–800 W Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) Measuring principle: Differential Scanning Calorimetry (DSC) Intracooler 40 Power supply: 230 V / 50 Hz Current consumption: 2 A Refrigerant: R507 Protection class: IP21 Max operating pressure: 24 bar Dimensions & weight (approx.): DSC 200 F3 Maia®: Dimensions (W × D × H): approx. 60 × 45 × 25 cm; Weight: approx. 35–40 kg Intracooler 40: Dimensions (W × D × H): approx. 30 × 40 × 50 cm; Weight: approx. 30 kg Important note: "The table shown in the photos is not included in the sale." Lhsdpeyaatpofx Afzob Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Condition: good (used), Hardness testing device Type: M5U 300-030 Manufacturer: emco Lsdpfsx U Dprex Afzjhb Condition: used, good, without warranty

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) Ledjx Uz Rtopfx Afzehb (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: good (used), Pendulum Impact Tester Model: SHP III Moh&Federhaff Impact Energy: 50, 100 and 200 Joule Lhodjx Uy Rfjpfx Afzeb Impact Speeds: 100 and 5,000 mm/s Condition: Used, good, no warranty

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Lhjdpfex Ux Ivex Afzob Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), Thermo Scientific Heratherm Thermo Scientific Heratherm OMS180 Forced Air Drying Oven – 250 °C Product Description: For sale is a Thermo Scientific Heratherm OMS180 forced air drying oven. The unit comes from laboratory use and is in good used condition. Heating, forced air circulation, and controls are fully functional. Suitable for laboratory, industrial, educational, research, material and sample drying applications. Technical Specifications: Manufacturer: Thermo Scientific Model: Heratherm OMS180 Max. temperature: 250 °C Temperature control: Digital Interior: Stainless steel Forced air operation: Yes Power supply: 230 V / 50–60 Hz Power consumption: approx. 3.06 kW Protection rating: IP20 Weight & Dimensions: External dimensions (W × D × H): approx. 620 × 630 × 800 mm Internal volume: approx. 180 liters Weight: approx. 75 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See pictures) (Specifications and technical data are subject to change and errors!) Lhodpfjx Uxz Aex Afzeb If you have any further questions, feel free to contact us by phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Lhsdpfxex Up Igj Afzeb Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Binder Model: FP 115 Binder Drying Oven with Forced Air Circulation Description: For sale is a high-quality BINDER FP 115 drying oven / heating cabinet from a laboratory inventory. Ideally suited for laboratory, industrial, workshop, research, or educational use. The control is digital, and the temperature remains stable throughout operation. The interior is made of metal and equipped with multiple pull-out shelves. Maximum load: 11 – 50 kg Technical Data (as per nameplate): Max. temperature: 300 °C (572 °F) Rated power: 1.60 kW Connection: 230 V / 1~ Current consumption: 7.0 A Frequency: 50/60 Hz Protection class: IP20 Temperature safety: DIN 12880, Class 2.0 Internal volume: approx. 115 liters Internal width (incubators...): 600 mm Internal depth (incubators...): 410 mm Internal height (incubators...): 480 mm External width (incubators...): 835 mm External depth (incubators...): 645 mm External height (incubators...): 705 mm Important note: "The table shown in the photos is not included in the sale." Lhodox Uph Hopfx Afzsb Item weight: 62 kg Condition: used Scope of delivery: (See photo) (Specifications and details subject to change and error!) If you have further questions, please feel free to contact us by phone.

Condition: excellent (used), Thermo Scientific Heratherm Thermo Scientific Heratherm OMS180 Forced Air Drying Oven – 250 °C Product Description: For sale is a Thermo Scientific Heratherm OMS180 forced air drying oven. The unit comes from laboratory use and is in good used condition. Heating, forced air circulation, and controls are fully functional. Suitable for laboratory, industrial, educational, research, material and sample drying applications. Technical Specifications: Manufacturer: Thermo Scientific Model: Heratherm OMS180 Lhedpfox Ugh Rex Afzsb Max. temperature: 250 °C Temperature control: Digital Interior: Stainless steel Forced air operation: Yes Power supply: 230 V / 50–60 Hz Power consumption: approx. 3.06 kW Protection rating: IP20 Weight & Dimensions: External dimensions (W × D × H): approx. 620 × 630 × 800 mm Internal volume: approx. 180 liters Weight: approx. 75 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See pictures) (Specifications and technical data are subject to change and errors!) If you have any further questions, feel free to contact us by phone.

Condition: excellent (used), KARG KARG Industrietechnik MeltFlow on – MFI/MVR Melt Flow Index Tester For sale is a MeltFlow on melt flow index tester (MFI/MVR) from KARG Industrietechnik, Made in Germany. The unit was used in plastics quality assurance and is in very good, well-maintained condition. Ideal for laboratories, quality assurance, development, and production in plastics processing. Technical data: Manufacturer: KARG Industrietechnik Model: MeltFlow on Code: 3200.000 Rated power: 1.6 kW Rated current: 7 A Voltage: 230 V / 50 Hz CE marking: yes Features & scope of delivery: - MeltFlow on tester - Set of weights: - 5.000 kg - 2.160 kg - 1.200 g Lodpfx Asx Trg Nsfzjhb - 5.000 g - Piston / plunger - Cleaning tool - Software CD: K-BASE software program V4.1 SP0 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and details are subject to changes and errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2023, Zwick / Roell Zwick/Roell HIT5P Pendulum Impact Tester Charpy Testing System – 5 Joules – Year of manufacture: 2023 Manufacturer: ZwickRoell Model: HIT5P Type: Pendulum Impact Tester / Charpy Testing Machine Year: 2023 Condition: Very good / little used (see photos) Description: For sale is a high-quality Zwick/Roell HIT5P pendulum impact tester, suitable for conducting Charpy impact tests in accordance with ISO 179. This system is designed for material testing with a maximum impact energy of 5 Joules and meets the high quality and precision standards of ZwickRoell. The unit was manufactured in 2023, is in excellent technical and visual condition, and is delivered including the documented components. Technical Data – Pendulum Impact Tester HIT5P: Max. nominal working capacity: 5 Joules Pendulum length: 250 mm Drop angle: 135.72° Impact velocity: 2.9 m/s Drop height: 428.98 mm Dimensions (W × D × H): approx. 680 × 429 × 684 mm Weight: approx. 70 kg (without tools), approx. 75 kg (with standard tools) Ambient temperature: +10 ... +35 °C Electrical connection: 100–240 V, single phase Max. power consumption: 150 W Mains frequency: 50/60 Hz Interfaces / Electronics: Data acquisition: 500 Hz Ethernet port Protection rating: IP32 Safety and Additional Equipment: Fixed safety screens left and right Permissible impact energy of the protective device: max. 5 J Charpy Anvil Stand Max. nominal working capacity: 5 J Max. specimen dimensions: 15 × 15 mm Dimensions: approx. 135 × 128 × 112 mm Lhedpfx Afjx Tp R Sjzob Weight: approx. 5 kg Supports (ISO 179-1) Material: Steel Sample height: 4 mm Scope of delivery: 2 pieces Charpy Pendulum 4.0 J Potential energy: 4.0 J Drop angle: 135.7° Drop height: 429 mm Weight: approx. 1.12 kg Software & Documentation - testXpert® III software (original data carrier included) - Complete technical manual / original operating instructions - ZwickRoell documentation and data carriers (see photos) Important notice: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.