Gindner

Condition: used, Year of construction: 2007, control MSX-850 III turning length 510 mm max. turning diameter 356 mm greates pass round over bed 923 mm swing diameter over slide rest 755 mm bar passage 65 mm spindle tunring speed 5.000 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Djdpsxvdvlofx Ah Uswd Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2012, Max. part diameter 39 mm Max. part length 65 mm max. turning length 58 mm control Siemens x-axis 750 mm z-axis 180/140 mm spindle tunring speed 6.000 U/min drive capacity - spindle motor 13,7 kW rapid traverse (x/z) 60/30 m/min Acceleration (x/z) 7 m/s² Tool compensation axis 3 mm Tool holder for turning tools Capto C 4 weight ca. 7.000 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Step conveyor, Knoll - Chip conveyor, Knoll - Robot, Fanuc - Tilting device, Sachwarz - Hydraulic unit, Bosch Rexroth Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well Dwsdpfx Aexuv Uqoh Ued as prior sale!

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA LU 15M-1000 MM WITH BARFEEDER Maximum Turning Diameter: approx. 360 mm Maximum Turning Length (Z-axis travel): approx. 1000 mm Spindle Speed: up to 4,500 rpm X-axis Travel: approx. 260 mm (≈ 10.24″) Z-axis Travel: approx. 640 mm (≈ 25.2″) Power Requirement: approx. 30 kW Dodpsxur Nwefx Ah Uswd Machine Weight: approx. 4.8 tons Turrets: Dual turrets (example: upper turret 12 positions, lower turret 8 positions) Live Tooling (M-function): Yes, on the M version

Condition: excellent (used), Year of construction: 2017, 533mm max. machining diameter, 584mm cutting length, 3,200rpm spindle speed, 102mm bar capacity, Dedpfxjxugtkj Ah Uowd 12 station turret, 4,000rpm milling speed, Y axis -/+ 51mm, 40Hp spindle motor, HAAS control, 254mm, 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Magazine barfeed .

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY NL502 2 AXIS CNC LATHE WITH FANUC 0IT PLUS 3B YEAR OF MANUFACTURE - 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS  STD AIR - AIR GUN  STD CHIP - CONVEYOR SIDE HINGED WITH CHIP BOX  STD CHU - 10 INCH 3 JAW HOLLOW HYD CHUCK INC SET SOFT JAWS  STD CHU - STANDARD HYD CHUCKING CYLINDER - HOLLOW Dedpfxext Nrmj Ah Uswd  STD CNC.OP - FANUC 0ITF 3B PLUS WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY  STD CNC.OP - MANUAL PULSE GENERATOR (MPG)  STD CS - COOLANT GUN  STD GUA - FRONT DOOR INTERLOCK  STD GUA - FULLY ENCLOSED SPLASH GUARDING SYSTEM  STD GUA - TELESCOPIC SLIDEWAY COVERS  STD HYD - STANDARD HYDRAULIC UNIT  STD LI - LED WORKING AREA LIGHTING SYSTEM  STD LI - PATROL LIGHT (3 COLOUR)  STD MISC - AIR CONDITIONING IN ELECTRICAL CABINET  STD MISC - BASIC MACHINE INSTALLATION PARTS  STD MISC - CE STANDARDS MACHINE CONFIGURATION  STD MISC - CENTRALIZED AUTOMATIC LUBRICATION SYSTEM  STD MISC - MACHINE MANUALS & OPERATOR HANDBOOKS  STD MISC - STANDARD ACCESSORIES  STD POW - TRANSFORMER (415V, 3PH, 50HZ)  STD SPGB TC - BELT DRIVE SPINDLE - 3,500 RPM - A2-6  STD SPGB TC - SPINDLE MOTOR FANUC 15.0 / 18.5 KW  STD TS - HYDRAULIC TAILSTOCK  STD TUR - 12 STATION SERVO TURRET MACHINE CONSTRUCTION & FEATURES  SOLID CAST IRON 45 DEGREE SLANT BED CONSTRUCTION  HARDENED & GROUND BOX GUIDEWAYS  12 STATION SERVO TURRET  10 INCH STANDARD CHUCK SIZE - 12 INCH & BAR CAPACITY UPGRADE OPTIONS  15.0 / 18.5 KW MAIN SPINDLE  HYDRAULIC TAILSTOCK MACHINE SPECIFICATION CAPACITY Max. Swing Diameter Over Bed Ø 600 MM Max. Swing Diameter Over Saddle Ø 480 MM Max. Turning Diameter Ø 500 MM Max. Turning Length 570 MM Max. Bar Capacity Ø 74 MM X / Z AXIS TRAVEL X-Axis Travel 280 MM Z-Axis Travel 600 MM X / Z AXIS SERVO MOTOR TORQUE X-Axis Torque 10.5 NM Z-Axis Torque 10.5 NM SPINDLE HEADSTOCK STD Spindle Nose A2-8 Spindle Bore 86 MM Spindle Speeds 30 ~ 3,500RPM Chuck Size Ø 10” - 245 MM Spindle Power 15.0 / 18.5 KW FEEDRATES X-Axis Rapid Traverse Rate 16 M / MIN Z-Axis Rapid Traverse Rate 20 M / MIN Cutting Feed Rate 1 ~ 8,000 MM / MIN TURRET Number of Turret Stations 12 Turret Indexing Time 0.2 SEC / POS Tool Size - Turning 25 x 25 MM Tool Size - Boring Ø 40 MM TAILSTOCK Tailstock Quill Diameter Ø 100 MM Tailstock Quill Travel 100 MM Tailstock Quill Taper MT5 LIVE CENTER ACCURACY Positioning Accuracy (X / Z) 0.010 / 0.010 MM Repeatability (X / Z) 0.005 / 0.007 MM MISCELLANEOUS Power Requirement 35 KVA Power Supply 415V / 3PH / 50HZ Cutting Coolant Volume 240 L Machine Dimensions (L / W / H) 4,290 / 1,880 / 1,750 Machine Gross Weight 4,000 KGS

Condition: good (used), Year of construction: 2007, Doosan Puma 400B CNC Lathe Control: Fanuc 21i TB Year: 2007 Max Turning Dia.: 550mm Max Turning Length: 1043mm Spindle Speeds: 2000 RPM Spindle Bore: 116.5mm Motor: 26KW With: 380mm Power Chuck Swarf Conveyor Tool Eye Turret Tool Holders Dwjdextpl Hopfx Ah Uod

Condition: good (used), Year of construction: 2005, functionality: fully functional, Doosan Puma 400C CNC Lathe 2 Axis Control: Fanuc Series 21i TB Year: 2005 Max Turning Dia.: 550mm Dsdpfextpk Nox Ah Ujwd Max Turning Length: 1024mm Spindle Speeds: 1500 RPM Spindle Bore: 165.5mm Motor: 37KW With: 520mm Power Chuck Tool Eye Swarf Conveyor

Condition: used, Year of construction: 2001, Lathe Okuma MA40, year 2001 Spindle hours: 17,112 Djdsxr Ulcepfx Ah Uowd The machine can be inspected under power.

Condition: used, Manufacturer: HYUNDAI Model: KIT 450 Type : CNC Cnc : FANUC 0i- TB Max. Diameter allowed on bed : 530 mm Max. Turning diameter : 170 mm Maximum turning length: 190 mm Bar passage diameter : 45 mm X axis : 450 mm Z axis : 300 mm Dwedpfx Aexr A N Ajh Ued Spindle speed : 60-6000 rpm Table dimensions : 550 x 2200 mm Number of Slots : 3 Slots diameter : 14 mm

Year of construction: 2006, condition: used, total length: 2,500 mm, total width: 2,300 mm, total height: 2,900 mm, Empty weight: 7.500 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - Serial number: 550/16 - Drive system: CNC - Control system brand: Fanuc - Control system type: 18i-TB - Power [kW]: 22.0 - Swing over bed [mm]: 560 - Carriage turning diameter [mm]: 520 - Spindle bore [mm]: 130 - Min. spindle speed [rpm]: 33 - Max. spindle speed [rpm]: 4000 - Options: Three-jaw chuck, C-axis, Facing lathe, Chip conveyor, Live tools - X-axis travel [mm]: 260 - Z-axis travel [mm]: 600 - Transport dimensions: 2500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dwjdpsxr Aghefx Ah Uod Lukas van Rossum

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Djdpfx Ahsxrnr Nj Uowd Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dedpfx Ajxrg Dwsh Ujwd Changes and errors in the technical data and information as well as subject to prior sale reserved!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 1 SOMAB TRANSMAB 450 LATHE, year 2002 CNC PL+S5 WITH LIVE TOOLING Swing over bed: 500 mm Machinable diameter: 320 mm Distance between centers: 950 mm Spindle: 4500 rpm – 18/24 kW 12-position turret VDI 30 3 chucks – 2 collet holders Dedpfx Aexq Nzieh Uewd Very good condition

Condition: excellent (used), Year of construction: 2018, operating hours: 5,137 h, functionality: fully functional, Year of manufacture: 2018 Control system: Fanuc 32i-Model B – Manual Guide i Maximum turning diameter: 530 mm Maximum turning length: 500 mm Travel distances: X-axis: 320 mm Z-axis: 1,200 mm Main spindle: Drive power: 37/30 kW Torque: 3,073/2,490 Nm Maximum speed: 2,000 rpm Max. bar capacity: 117 mm Turret: 12-station tool turret, BMT75P 12 driven stations Drive power: 7.5/5.5 kW Maximum speed: 4,000 rpm Additional equipment: Programmable tailstock MK5 Main spindle with 2-speed gearbox Tooleye (tool measurement) Chip conveyor High-pressure pump, 20 bar 3-jaw chuck Ø 380 mm Tool breakage monitoring Program memory expansion Dsdpfjxqn Uhsx Ah Uewd Hyundai L400MC CNC Lathe – Powerful and Reliable The Hyundai L400MC is a robust and precise CNC lathe, engineered for demanding machining tasks. Ideal for businesses prioritizing stability, durability, and industrial performance. Thanks to its solid construction, the L400MC offers maximum accuracy even with heavy workpieces and long machining cycles. An excellent choice for demanding applications in batch or single-part production.

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Dwjdpfx Ahoxqd Dro Ujd Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2006, Used CNC lathe from Viktor Type: VTurn II 26 Turning diameter: 520 mm X: 240 mm Z: 1250 mm Spindle: 87 mm Y-axis C-axis Driven tools Hydraulic steady rest Chip conveyor Dwsdpfxexpxafs Ah Usd

Condition: excellent (used), Harrison Alpha 1550 XS Manual / CNC Lathe Year: 2018 Control: FANUC Oi-TF Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Dwedpfxjxpnk Tj Ah Usd Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Quick Change Toolpost Boring Bar attachment

Condition: good (used), Year of construction: 2013, CNC Lathe with y-axis Okuma - LT2000EX Dsdoxpg Ecspfx Ah Uswd Length:4200mm Width:2200mm Height:2700mm Weight:10000kg

Condition: used, Technical Data: Centre height: 275 mm Distance between centres: 3000 mm Swing diameter over bed: 550 mm Swing diameter over cross slide: 340 mm Spindle bore: 105 mm Spindle nose: Camlock 8" Speed range: 0 - 2500 rpm Motor power: 19.5 kW Dwsdpfsxpgrpjx Ah Usd Equipment: - CNC control FAGOR 8055 - 4-position turret head - 3-jaw chuck ø 315 mm - Steady rest

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Featured with: - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Djdpfx Ahjxmvzuo Ujwd Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Condition: good (used), Year of construction: 2010, functionality: fully functional, Manufacturer: Okuma Model: Multus B300-W CNC: OSP-P200L Year of manufacture: 2010 X-axis: 580 mm Z-axis: 935 mm Y-axis: 160 mm C-axis: 360° (0.0001°) B-axis: H1 ATC turret, HSK 63, 6000 rpm, PREX 11/7.5 kW Spindle speed: 38–5000 rpm 40-position ATC Machine weight: 9982 kg Machine dimensions: L=4368.8 x W=2032 x H=2590.8 mm Djdpfx Ahexmg Sqo Uewd

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160/1840mm mm Distance Between Centres: 800 / 1500 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Dedpfx Ajxmd Tfsh Uewd Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 1999, Make: MAZAK Type of machine: Super Quick Turn 200M Year of manufacture: 1999 Control system: Mazatrol T-Plus Machine's weight: 4.850 kg x-travel: 190 mm Dedpfsxl Ukfjx Ah Uowd z-travel: 575 mm Speed range: 5.000 U/min Cutting diameter: 525 mm Turning length: 538 mm Overall dimensions: 3.100 × 1.700 × 2.200 mm Tool turret - slots: 12 Stationen Spindle opening: 61 mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 900 mm, turning diameter: 300 mm, spindle bore: 86 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 270 mm, controller model: FANUC 31i-B, TECHNICAL DETAILS Swing diameter over bed: 780 mm Swing diameter over slide: 700 mm Maximum turning diameter: 300 mm Maximum turning length: 900 mm Bar capacity: 76 mm Spindle Chuck size (main/sub-spindle): Ø254 mm Spindle bore (main/sub-spindle): Ø86 mm Spindle speed: 4,000 rpm Spindle motor (max./continuous): 26 / 15 kW Spindle drive: integrated motor Spindle flange: A2–8 C-axis indexing: 0.001° Travel axes X1/X2 axis: 270 / 190 mm Z1/Z2 axis: 920 mm Y axis: ±120 mm Rapid traverses Rapid traverse speed X/Y/Z axes: 24 / 24 / 24 m/min Rapid traverse speed ZB axis: 12 m/min Guideway system: Box Guide Turret Tool stations: 2 × 12 External tool size: Ø25 mm Internal tool size: Ø40 mm Indexing time: 0.2 s/step Turret system: Wedge type Driven tools Motor power (max./continuous): 5.5 / 2.2 kW Tool speed: 4,000 rpm Collet size: Ø20 ER32 Tool type: BMT65 MACHINE DETAILS Control: FANUC 31i-B Dwjdoxltbcspfx Ah Uod Tank and supply system Coolant tank: 230 l Lubrication tank: 8 l Electrical data Power consumption: 69 kVA Line voltage: 220 / 400 V Dimensions & weight Dimensions (L × W x H): 3,670 × 2,170 x 2,601 mm Weight: 11,000 kg EQUIPMENT LNS bar feeder

Condition: excellent (used), Year of construction: 2005, turning length: 1,500 mm, CNC lathe STYLE - 510 x 1500 Revolver with Vdi 40 New software STYLE Version 2021? Closed housing 3 chuck 315 mm Under power DBC Turning Length: 1500mm Swing over bed Ø: 510mm Swing over cross slide Ø:300mm Dwjdpfx Ahoxlf Ihe Ued Spindle bore: 80mm Spindle power: 16kW Bed width: 330mm Tailstock spindle Ø: 75Ø Stroke pinole: 160mm Spindle taper: 5Mk Speeds / ranges: 2500Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 3700mm Width: 1800mm Height: 1800mm Weight: 3250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!