Wirtz

Condition: good (used), C.E. Lsdpfxozn I Hfo Agpehi

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Lhsdpfxjzn Iwqs Agpoi Press width, max.: approx. 1,400 mm 4 pcs. vertical pressing units, adjustable, each with 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive

Condition: excellent (used), Year of construction: 2011, I sell the fully equipped edge banding machine BRANDT Ambition 1220 FC, year 2011: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Glue scrapers Control panel Working thickness adjustment manual driven Material height 8-50mm Edge thickness 0,4-3mm Lodpfx Ajzn Avzegpohi Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1600kg Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining unit, corner copying unit, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Lodpfx Agozn Afpjpjhi Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100 mm, 4x80 mm, including the illustrated ductwork to 200 mm Easy-Touch control with color display for easy machine operation 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed guide: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing unit with automatic edge infeed for roll material up to 3 mm Pressure zone with 3 rollers Cut-off saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All reversible inserts of the milling units and trimming blades have been replaced or re-sharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight: approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Max. volume flow rate: 5000 m³/h Nominal volume flow rate: 20 m/s, 3540 m³/h Nominal negative pressure at 20 m/s: 2500 Pa Residual dust concentration: 0.1 mg/m³ Sound pressure level: 75 dB Container Automatic filter cleaning Spark arrester The ductwork to multiple machines can be included Operational shutdown Dimensions: 2640 x 1140 x 2260 mm Extraction connection: 250 mm Weight: 825 kg Motor power: 5.5 kW Motor voltage: 400 V (50 Hz) Ljdpfx Agoznwz Sopjhi

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade Ljdsznvqfopfx Agpshi K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Lodpfsznu Dwjx Agpehi Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: excellent (used), Year of construction: 2009, Edge banding machine Manufacturer: hebrock Lhsdpfjznuvmox Agpsi Type: AKV 3005 DK-F Year of manufacture: 2009 Edge thickness: 0.4 - 3/8 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 190 mm Min. workpiece width: 80 mm Feed rate: 10 m/min Power: 12.1 kW Gluing unit: Yes Cutting unit: Yes Trimming unit: Yes Corner copying unit: Yes Radius trimming blade: Yes Surface trimming blade: Yes

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design - edge thickness 0.4 - 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attachment before the gluing section Edge band magazine, fully automatic, for roll and strip material Glue application station GLU JET cartridges + PU adhesive Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment Pressure unit, pneumatic Cutting unit, pneumatic, for roll and strip material up to 8 mm edge thickness With pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush trimming 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit - rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping unit - finishing Buffing unit - polishing Ledpsznuncjfx Agpjhi Spray device in the infeed and outfeed area Complete DIA tool equipment included First delivery 2018 Machine in TOP condition, from a leasing return Available from stock in Lieboch

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Lhodoznucyepfx Agpei Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: excellent (used), Year of construction: 2024, Hebrock adhesive basin / exchange basin Lhjdpfx Asznnlhjgpsi For Hebrock K36 Year of manufacture: 2024 Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2016, AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing cutter unit, including DIA tooling. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station with radius R 2.5 mm. Technical specifications: - Hot-melt glue application to the workpiece for edge material up to 3 mm. - 60 mm workpiece thickness without jointing aggregate, 40 mm with jointing aggregate. - Maintenance-free, coated glue pot. - HF end trimming station (16,000 rpm) for front and rear edge overhang. - HF milling station (16,000 rpm) with replaceable insert cutter (combination type) and fine adjustment accessible from the operator side. - Spaces available for additional processing units (Hebrock system). - Feed rate approx. 10 m/min. - Adjustable cutting depth for trimming saw. - Signal lamp for workpiece sequence. - Robust chain drive. - Ergonomically arranged control panel. - Double roller top pressure beam. - Viewing windows for aggregates from both rear and operator sides. - PLC control including touchscreen. Technical data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic including cooling and anti-static spray unit, 2014, 1 unit hot air aggregate for creating the optical zero-joint using special edge materials intended for this purpose. Including: - Pneumatic glue pot positioning - Cooling and anti-static spray unit - Two additional quick-change edge channels - Special version for corner rounding unit, max. workpiece thickness 60 mm, minimum workpiece length 200 mm - Exclusively for Hebrock edge banding machines of the 3000 series - Retrofitting possible later (additional costs on request) Technical data (Airtronic & corner rounding unit): - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Operational in approx. 2 minutes Ledjznldhepfx Agpohi - Special version, minimum workpiece thickness 8 mm Further accessories and upgrades available on request: - Airtronic retrofitting on PLC machines, only possible at the Hüllhorst–Oberbauerschaft factory - Upgrade to edge thickness 8 mm, up to max. workpiece thickness 40 mm, with pneumatic saw adjustment - Special infeed fence for overlaid panels, 16 mm and 19 mm thickness, max. glue overhang 8 mm, separate pneumatic milling cutter adjustment (straight/radius) controllable from operator panel - Buffing station (swabbel), 1 unit - Corner rounding unit, 1 unit, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Ball bearing for corner rounding cutter 24.1 mm: 1 unit - Ball bearing for corner rounding cutter 24.2 mm: 1 unit - Corner rounding unit for 60 mm workpiece thickness: 1 unit - Quick-change device for the corner rounding unit: 1 unit - Exchange motor 0.37 kW for the corner rounding unit: 1 unit, including terminal box with electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or optionally Siko counter, including R 1.0 mm radius cutter, 24.1 mm bearing for corner rounding unit: 1 unit, 24.2 mm: 1 unit - Radius scraper: 1 unit with pneumatic lift-off device, radius R 2.0 mm and R 1.0 mm - Flat scraper: 1 unit with pneumatic insertion control - Glue station changeover system including glue outlet device downward (preparati

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Space requirement: 2800 x 1200 mm, Weight: approx. 450 kg, Edge thickness: 0.4 - 5.0 mm, Lodpfeznbrzex Agpehi Strip material: width x height 5 - 49 mm, Feed rate of workpiece: 8 m/min, Power of feed motor: 0.75 kW, Max. workpiece dimensions: length 210, width 70, thickness min./max. 10–45 mm, Mains voltage: 3 × 400 V.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Grinding unit Gluing system Edge pressing unit Heading unit Lhedpfxozna Uzo Agpji Radius milling unit Rounding unit Edge scraping unit Glue scraping unit Brush unit 6,767 operating hours and 454,000 meters of edge processed Available starting in September 2026.

Condition: used, Biesse Akron 1440 A - Manual setting - 2017. Lhjdpfezm U Rnsx Agpei £16750 + VAT (Ex-Works). Manual setting edgebander with multi profile cutters for thin tape and 2mm tape. Can also apply 8mm Lippings. PLC Control unit. EVA Glue, Pre-Melting unit. Pressure zone. End Trimming Saws. Top & Bottom Profile trimming. 2 x Motor Corner Rounding. Profile scraping. Glue line scraper Buffing. Machine still powered and comes with extraction manifold.

Condition: good (used), Bimatic edge banding machine edge banding with roller Lhjdpfx Agezm Th Ejpsi pneumatic preliminary cutting unit pressure rollers trimming cutters R1-R2 top-bottom milling unit max. component height 40 mm max. veneer thickness in roll 3 mm feed rate approx. 9 m/min Machine length 240 cm The machine is well-maintained and in good condition.

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Lhodpfxozmy N No Agpei Feed speed 8 m/min. Weight 900 kg

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 2933751040F, functionality: fully functional, operating hours: 3,940 h, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, actuation type: pneumatic, total length: 2,540 mm, total width: 1,485 mm, overall weight: 670 kg, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, We are offering this very well-maintained SCM OLIMPIC K201 edge banding machine, manufactured in 2005. Machine features: with pneumatic trimming unit, flush-cutting unit, radius/flush-routing unit, radius-pulling blade unit, polishing disc unit. Price: 4,900.00 EUR net ex works Rodgau plus VAT, loading costs and shipping. If you have any questions or require further information, please feel free to send us a message or call us. Ljdpfxszmxxij Agpshi

Condition: used, Year of construction: 2015, edge thickness (max.): 22 mm, feed rate X-axis: 25 m/min, milling spindle speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Manufacturer/Model: RT-E Motor power: 4 kW Gluing Preheating lamps: for heating the panel side PUR pre-melter: Nordson PURBLUE 4-HO Glue application unit: 100 V End-capping unit Manufacturer/Model: YU/SP750 Number of motors: 2 Positioning: NC-controlled Milling unit Manufacturer/Model: Type U Motor power: 4 kW Speed: 12,000 rpm Engagement: automatically time-controlled Polishing unit Number of motors: 2 TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 62 mm Min. panel length: 380 mm Min. panel width: 55 mm Min. edge thickness: 0.4 mm Max. edge thickness: 22 mm Max. feed rate: 25 m/min Pressure: rubber belt MACHINE DETAILS Control system: PC control EQUIPMENT CE marking Rubber belt pressure Panel support guides Pre-milling unit RT-E Preheating lamps for panel side PUR pre-melter Nordson PURBLUE 4-HO End-capping unit YU/SP750 Milling unit Type U Polishing unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Ledpfx Aozmvpxsgpjhi External reference: 6527

Condition: good (used), Year of construction: 2014, machine/vehicle number: K/45173, functionality: fully functional, operating hours: 3,650 h, power: 25.1 kW (34.13 HP), input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 20 m/min, total height: 1,750 mm, total length: 8,680 mm, total width: 1,300 mm, overall weight: 4,500 kg, Equipment: CE marking, Available from April 1, 2027, for self-dismantling and self-collection. Suitable for veneer, plastic, and solid edge banding. Edge banding thickness: 0.2-20mm Workpiece dimensions: Width: minimum 65mm Height: minimum 8mm Height: maximum 60mm Length: maximum 150mm Throughput speed: 12-20m/min - infinitely adjustable Glue application: Glue application roller with Vario-melt dosing system Working height: 940mm Machine dimensions: Height: 1750mm Width: 1300mm Length: 8680mm Weight: 4500kg - Double roller pressure, electronic positioning based on panel thickness - Automatic continuous lubrication - Automatic edge banding magazine Lodpfx Agszmu T Njpohi - Automatic roller magazine For an exact machine description, see the photos and data sheets in the appendix. In addition, the LIGMA Tech TYPE ZHR 05 workpiece return system, as shown in the photos and data sheet, can be purchased for €7,000 (excluding VAT).

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Lodozmtldepfx Agpshi Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Ljdpfx Aszmtkaogpshi Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Manufacturer model: WD60 Motor power: 0.35 kW Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Total connected load: 22 kW EQUIPMENT Lhsdpfx Agjzmtivopji Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: used, machine/vehicle number: 008660, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Lhjdpfx Ajzmmt Ujgpsi Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2017, Edgebander manufactured in 2017. This SCM Olimpic K360 T-ER1 features a feed speed of 11 m/min and accommodates edge thicknesses from 0.4 to 6 mm. It includes a pre-milling unit with counter-rotating diamond heads, an EVA glue unit, and a buffing unit. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K360 T-ER1 machine we have for sale. Contact us for further details. • Feed speed: 11 m/min • Edge thickness: 0.4–6 mm • Panel thickness: 8–60 mm • Min. workpiece: 140 x 90 mm • Power supply: 400 V / 3~ / 50 Hz, 23 AAggregates: • Pre-milling: 2 counter-rotating diamond heads (up to 3 mm removal) • EVA glue unit • Pressure zone with driven roller + 2 pressure rollers • End-cutting unit K-2 (straight/bevel, automatic switching) • Top/bottom trimming: flush, radius, chamfer Lhsdpfx Aszmgviegpoi • Corner rounding R1/R2 • Profile and flat scrapers • Buffing unit • Anti-adhesive fluid system (2 fluids) • Edge roll feeder